aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-28ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT caseLen Brown1-12/+16
commit d306ebc28649b89877a22158fe0076f06cc46f60 (ACPI: Be in TS_POLLING state during mwait based C-state entry) fixed an important power & performance issue where ACPI c2 and c3 C-states were clearing TS_POLLING even when using MWAIT (ACPI_STATE_FFH). That bug had been causing us to receive redundant scheduling interrups when we had already been woken up by MONITOR/MWAIT. Following up on that... In the MWAIT case, we don't have to subsequently check need_resched(), as that c heck was there for the TS_POLLING-clearing case. Note that not only does the cpuidle calling function already check need_resched() before calling us, the low-level entry into monitor/mwait calls it twice -- guaranteeing that a write to the trigger address can not go un-noticed. Also, in this case, we don't have to set TS_POLLING when we wake, because we never cleared it. Signed-off-by: Len Brown <[email protected]> Acked-by: Venkatesh Pallipadi <[email protected]>
2010-05-28Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds2-4/+3
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Fix leds-gpio openfirmware compile issue leds: Kconfig fixes
2010-05-28tracing: fix for tracepoint API changeStephen Rothwell1-5/+5
Commit 38516ab59fbc5b3bb278cf5e1fe2867c70cff32e ("tracing: Let tracepoints have data passed to tracepoint callbacks") requires this fixup to the powerpc code. Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Steven Rostedt <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-05-28Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linuxLinus Torvalds10-40/+594
* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PV210: serial: Fix section mismatch warning ARM: s3c2410_defconfig: Add new machines ARM: s3c6400_defconfig: Add framebuffer and basic LCD ARM: s3c6400_defconfig: Add RTC driver support ARM: s3c6400_defconfig: Enable USB host side ARM: s3c6400_defconfig: Add SPI driver ARM: s3c6400_defconfig: Update compiled machines ARM: S5P: Regoster clk_xusbxti clock for hsotg driver ARM: S3C64XX: Add USB OTG HCLK to the list of clocks ARM: SAMSUNG: gpio-cfg.h: update documentation ARM: SAMSUNG: Documentation: add documentation on GPIO code ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin() ARM: S3C24XX: Documentation: add section on gpiolib changes ARM: S3C24XX: Documentation: update GPIO documentation ARM: S3C24XX: Documentation: update documentation overview ARM: SAMSUNG: Documentation: update directory layout ARM: SAMSUNG: Documentation: update the list of SoCs supported
2010-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds25-119/+214
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) netlink: bug fix: wrong size was calculated for vfinfo list blob netlink: bug fix: don't overrun skbs on vf_port dump xt_tee: use skb_dst_drop() netdev/fec: fix ifconfig eth0 down hang issue cnic: Fix context memory init. on 5709. drivers/net: Eliminate a NULL pointer dereference drivers/net/hamradio: Eliminate a NULL pointer dereference be2net: Patch removes redundant while statement in loop. ipv6: Add GSO support on forwarding path net: fix __neigh_event_send() vhost: fix the memory leak which will happen when memory_access_ok fails vhost-net: fix to check the return value of copy_to/from_user() correctly vhost: fix to check the return value of copy_to/from_user() correctly vhost: Fix host panic if ioctl called with wrong index net: fix lock_sock_bh/unlock_sock_bh net/iucv: Add missing spin_unlock net: ll_temac: fix checksum offload logic net: ll_temac: fix interrupt bug when interrupt 0 is used sctp: dubious bitfields in sctp_transport ipmr: off by one in __ipmr_fill_mroute() ...
2010-05-28FRV: ARCH_KMALLOC_MINALIGN was already definedDavid Howells2-4/+2
ARCH_KMALLOC_MINALIGN was already defined in asm/mem-layout.h and so shouldn't have been added to asm/cache.h as well, but rather altered in place. The commit that added it to asm/cache.h was: commit 69dcf3db03626c4f18de624e8632454ea12ff260 Author: FUJITA Tomonori <[email protected]> Date: Mon May 24 14:32:54 2010 -0700 frv: set ARCH_KMALLOC_MINALIGN Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: David Howells <[email protected]> cc: FUJITA Tomonori <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-05-28Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds3-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix_timer: Fix error path in timer_create hrtimer: Avoid double seqlock timers: Move local variable into else section timers: Fix slack calculation really
2010-05-28Merge branch 'for-linus' of ↵Linus Torvalds112-415/+782
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: remove detritus left by "mm: make read_cache_page synchronous" fix fs/sysv s_dirt handling fat: convert to use the new truncate convention. ext2: convert to use the new truncate convention. tmpfs: convert to use the new truncate convention fs: convert simple fs to new truncate kill spurious reference to vmtruncate fs: introduce new truncate sequence fs/super: fix kernel-doc warning fs/minix: bugfix, number of indirect block ptrs per block depends on block size rename the generic fsync implementations drop unused dentry argument to ->fsync fs: Add missing mutex_unlock Fix racy use of anon_inode_getfd() in perf_event.c get rid of the magic around f_count in aio VFS: fix recent breakage of FS_REVAL_DOT Revert "anon_inode: set S_IFREG on the anon_inode"
2010-05-28remove detritus left by "mm: make read_cache_page synchronous"Al Viro1-4/+1
gets minix get_dir_page() in sync with its analogs; back in 2007 Nick has switched read_cache_page() and friends to sync behaviour (i.e. they wait for the page to get unlocked, check if it's uptodate and if it isn't return ERR_PTR(-EIO) instead) and removed the duplicate logics from the callers. In case of fs/minix/dir.c he'd removed only half of that... Signed-off-by: Al Viro <[email protected]>
2010-05-28netlink: bug fix: wrong size was calculated for vfinfo list blobScott Feldman1-5/+6
The wrong size was being calculated for vfinfo. In one case, it was over- calculating using nlmsg_total_size on attrs, in another case, it was under-calculating by assuming ifla_vf_* structs are packed together, but each struct is it's own attr w/ hdr (and padding). Signed-off-by: Scott Feldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28netlink: bug fix: don't overrun skbs on vf_port dumpScott Feldman1-6/+9
Noticed by Patrick McHardy: was continuing to fill skb after a nla_put_failure, ignoring the size calculated by upper layer. Now, return -EMSGSIZE on any overruns, but also allow netdev to fail ndo_get_vf_port with error other than -EMSGSIZE, thus unwinding nest. Signed-off-by: Scott Feldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28xt_tee: use skb_dst_drop()Eric Dumazet1-2/+2
After commit 7fee226a (net: add a noref bit on skb dst), its wrong to use : dst_release(skb_dst(skb)), since we could decrement a refcount while skb dst was not refcounted. We should use skb_dst_drop(skb) instead. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28netdev/fec: fix ifconfig eth0 down hang issueBryan Wu1-12/+16
BugLink: http://bugs.launchpad.net/bugs/559065 In fec open/close function, we need to use phy_connect and phy_disconnect operation before we start/stop phy. Otherwise it will cause system hang. Only call fec_enet_mii_probe() in open function, because the first open action will cause NULL pointer error. Signed-off-by: Bryan Wu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28ARM: S5PV210: serial: Fix section mismatch warningMarek Szyprowski1-4/+4
Rename the structure to avoid the following warning: WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s5p_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: Merge for-2635/defconfig3Ben Dooks2-22/+403
Merge branch 'for-2635/defconfig3' into for-linus/2635-updates
2010-05-28ARM: s3c2410_defconfig: Add new machinesBen Dooks1-8/+27
Add the SMDK2416, and the GTA02 to the list of machines that are included in the s3c2410_defconfig. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: s3c6400_defconfig: Add framebuffer and basic LCDBen Dooks1-2/+43
Add the framebuffer driver and some basic LCD configurations that should be suitable for the SMDK boards. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: s3c6400_defconfig: Add RTC driver supportBen Dooks1-1/+66
Now that the RTC driver supports the S3C64XX, enable it in the build. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: s3c6400_defconfig: Enable USB host sideBen Dooks1-3/+217
Enable the USB Host side by adding the USB OHCI and some basic USB driver modules. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: s3c6400_defconfig: Add SPI driverBen Dooks1-1/+37
The SPI driver was added last kernel round, so enable the core SPI and add the 64XX and bitbang driver as modules. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: s3c6400_defconfig: Update compiled machinesBen Dooks1-7/+13
Add the machines that have been added in the last round to the list of builds. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: S5P: Regoster clk_xusbxti clock for hsotg driverThomas Abraham1-0/+1
The clk_xusbxti clock is added to the list of clocks to be registred during boot time clock registration. Signed-off-by: Thomas Abraham <[email protected]> Signed-off-by: Kukjin Kim <[email protected]> [[email protected]: edited title] Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: S3C64XX: Add USB OTG HCLK to the list of clocksThomas Abraham1-0/+6
Add the USB OTG HCLK clock to the list of clocks to be registered during initialization. Signed-off-by: Thomas Abraham <[email protected]> Signed-off-by: Kukjin Kim <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: SAMSUNG: gpio-cfg.h: update documentationBen Dooks1-0/+21
Update the documentation on the gpio configuration calls to add more references to useful information and also to document the values that are passed. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: SAMSUNG: Documentation: add documentation on GPIO codeBen Dooks3-0/+48
Add some documentation in Documentation/arm/Samsung for the GPIO code and where to look for the necessary functions. Update the S3C24XX case as well. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()Ben Dooks1-1/+1
Fix typo in s3c_gpio_cfgpin() documentation, the second argument is @to not @pin again. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: S3C24XX: Documentation: add section on gpiolib changesBen Dooks1-0/+44
Add section to the S3C24XX GPIO documentation on the recent changes to move towards gpiolib integration. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: S3C24XX: Documentation: update GPIO documentationBen Dooks1-2/+33
Upate the S3C24XX GPIO documentation after the changes for gpiolib and show which calls are being replaced by gpiolib or the new s3c generic calls. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: S3C24XX: Documentation: update documentation overviewBen Dooks1-1/+10
Add the two new SoCs added in this release cycle and update the notes on the gpiolib conversion. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: SAMSUNG: Documentation: update directory layoutBen Dooks1-7/+16
Update the directory layout in Documentation/arm/Samsung/Overview.txt to reflect the changes that have been made in the latest kernel updates. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28ARM: SAMSUNG: Documentation: update the list of SoCs supportedBen Dooks1-3/+7
Update the list of SoCs supported for the plat-s5p range. Signed-off-by: Ben Dooks <[email protected]>
2010-05-28cnic: Fix context memory init. on 5709.Michael Chan2-9/+5
We need to zero context memory on 5709 in the function cnic_init_context(). Without this, iscsid restart on 5709 will not work because of stale data. TX context blocks should not be initialized by cnic_init_context() because of the special remapping on 5709. Update version to 2.1.2. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28drivers/net: Eliminate a NULL pointer dereferenceJulia Lawall1-2/+1
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28drivers/net/hamradio: Eliminate a NULL pointer dereferenceJulia Lawall1-2/+1
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28be2net: Patch removes redundant while statement in loop.Sarveshwar Bandi1-1/+1
Signed-off-by: Sarveshwar Bandi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28ipv6: Add GSO support on forwarding pathHerbert Xu1-1/+1
Currently we disallow GSO packets on the IPv6 forward path. This patch fixes this. Note that I discovered that our existing GSO MTU checks (e.g., IPv4 forwarding) are buggy in that they skip the check altogether, when they really should be checking gso_size + header instead. I have also been lazy here in that I haven't bothered to segment the GSO packet by hand before generating an ICMP message. Someone should add that to be 100% correct. Reported-by: Ralf Baechle <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28net: fix __neigh_event_send()Eric Dumazet1-0/+1
commit 7fee226ad23 (net: add a noref bit on skb dst) missed one spot where an skb is enqueued, with a possibly not refcounted dst entry. __neigh_event_send() inserts skb into arp_queue, so we must make sure dst entry is refcounted, or dst entry can be freed by garbage collector after caller exits from rcu protected section. Reported-by: Ingo Molnar <[email protected]> Tested-by: Ingo Molnar <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codecAndreas Herrmann1-0/+1
On a Thinkpad Edge 13 "01972NG" I had the problem that speakers played sound although headphones were plugged in. Using model=ideapad with latest alsa-git kernel fixed this. So adding this quirk to use ideapad for another Thinkpad Edge variant seems sensible. Cc: Jerone Young <[email protected]> Signed-off-by: Andreas Herrmann <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-05-28leds: Fix leds-gpio openfirmware compile issueRichard Purdie1-1/+0
Fix a compile issue when openfirmware is enabled from commit 2146325df2c2640059a9e064890c30c6e259b458. Signed-off-by: Richard Purdie <[email protected]>
2010-05-28leds: Kconfig fixesRichard Purdie1-3/+3
Soekris net5501 is x86 only and cleanup some undeeded dependencies Signed-off-by: Richard Purdie <[email protected]>
2010-05-28ALSA: hda: Use LPIB for Sony VPCS11V9EDaniel T Chen1-0/+1
BugLink: https://launchpad.net/bugs/586347 Symptom: On the Sony VPCS11V9E, using GStreamer-based applications with PulseAudio in Ubuntu 10.04 LTS results in stuttering audio. It appears to worsen with increased I/O. Test case: use Rhythmbox under increased I/O pressure. This symptom is reproducible in the current daily stable alsa-driver snapshots (at least up until 21 May 2010; later snapshots fail to build from source due to missing preprocessor directives when compiled against 2.6.32). Resolution: add SSID for this machine to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: Lauri Kainulainen <[email protected]> Cc: <[email protected]> Signed-off-by: Daniel T Chen <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-05-28ALSA: usb-audio: fix feature unit parser for UAC2Daniel Mack1-1/+1
Fix a small off-by-one bug which causes the feature unit to announce a wrong number of channels. This leads to illegal requests sent to the firmware eventually. Signed-off-by: Daniel Mack <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-05-27fix fs/sysv s_dirt handlingAl Viro1-0/+1
got broken on ->sync_fs() conversion a year ago, nobody noticed... Signed-off-by: Al Viro <[email protected]>
2010-05-27fat: convert to use the new truncate convention.[email protected]3-15/+57
Cc: OGAWA Hirofumi <[email protected]> Cc: Christoph Hellwig <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27ext2: convert to use the new truncate convention.[email protected]3-36/+119
I also have commented a possible bug in existing ext2 code, marked with XXX. Cc: [email protected] Cc: Christoph Hellwig <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27tmpfs: convert to use the new truncate convention[email protected]1-21/+22
Cc: Christoph Hellwig <[email protected]> Acked-by: Hugh Dickins <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27fs: convert simple fs to new truncateNick Piggin5-19/+15
Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate sequence. Cc: Christoph Hellwig <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27kill spurious reference to vmtruncate[email protected]10-22/+37
Lots of filesystems calls vmtruncate despite not implementing the old ->truncate method. Switch them to use simple_setsize and add some comments about the truncate code where it seems fitting. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27fs: introduce new truncate sequence[email protected]8-63/+300
Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <[email protected]> Acked-by: Jan Kara <[email protected]> Signed-off-by: Nick Piggin <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-05-27fs/super: fix kernel-doc warningRandy Dunlap1-2/+2
Fix fs/super.c kernel-doc warning and function notation: Warning(fs/super.c:957): No description found for parameter 'sb' Signed-off-by: Randy Dunlap <[email protected]> Cc: Alexander Viro <[email protected]> Signed-off-by: Al Viro <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.