aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-21nvme-tcp: fix incorrect h2cdata pdu offset accountingSagi Grimberg1-3/+10
When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion") Reported-by: Nowak, Lukasz <[email protected]> Tested-by: Nowak, Lukasz <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-21nvme-fc: remove freeze/unfreeze around update_nr_hw_queuesJames Smart1-2/+0
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by: James Smart <[email protected]> [dwagner: added explanation why no IO is pending] Signed-off-by: Daniel Wagner <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-21nvme-fc: avoid race between time out and tear downJames Smart1-0/+2
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by: James Smart <[email protected]> Tested-by: Daniel Wagner <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Daniel Wagner <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-21nvme-fc: update hardware queues before using themDaniel Wagner1-8/+8
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first. If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress. Signed-off-by: Daniel Wagner <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: James Smart <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-15blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pdLi Jinlin1-0/+8
KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by: Tejun Heo <[email protected]> Signed-off-by: Li Jinlin <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-15blkcg: fix memory leak in blk_iolatency_initYanfei Xu1-4/+6
BUG: memory leak unreferenced object 0xffff888129acdb80 (size 96): comm "syz-executor.1", pid 12661, jiffies 4294962682 (age 15.220s) hex dump (first 32 bytes): 20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff G...... ..).... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82264ec8>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82264ec8>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82264ec8>] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724 [<ffffffff8225b8c4>] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185 [<ffffffff822253da>] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566 [<ffffffff8223b175>] blk_mq_init_queue_data block/blk-mq.c:3100 [inline] [<ffffffff8223b175>] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124 [<ffffffff826a9303>] loop_add+0x1c3/0x360 drivers/block/loop.c:2344 [<ffffffff826a966e>] loop_control_get_free drivers/block/loop.c:2501 [inline] [<ffffffff826a966e>] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516 [<ffffffff81597eec>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81597eec>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff81597eec>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff81597eec>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff843fa745>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff843fa745>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will not be invoked for cleanup. That leads a memory leak. Swap the blk_throtl_init() and blk_iolatency_init() calls can solve this. Reported-by: [email protected] Fixes: 19688d7f9592 (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls) Signed-off-by: Yanfei Xu <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-15Merge tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme into block-5.15Jens Axboe5-34/+26
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15 - fix ANA state updates when a namespace is not present (Anton Eidelman) - nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show (Dan Carpenter) - avoid race in shutdown namespace removal (Daniel Wagner) - fix io_work priority inversion in nvme-tcp (Keith Busch) - destroy cm id before destroy qp to avoid use after free (Ruozhu Li)" * tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme: nvme-tcp: fix io_work priority inversion nvme-rdma: destroy cm id before destroy qp to avoid use after free nvme-multipath: fix ANA state updates when a namespace is not present nvme: avoid race in shutdown namespace removal nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
2021-09-14nvme: remove the call to nvme_update_disk_info in nvme_ns_removeChristoph Hellwig1-2/+0
There is no need to explicitly unregister the integrity profile when deleting the gendisk. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-14block: flush the integrity workqueue in blk_integrity_unregisterLihong Kou1-0/+3
When the integrity profile is unregistered there can still be integrity reads queued up which could see a NULL verify_fn as shown by the race window below: CPU0 CPU1 process_one_work nvme_validate_ns bio_integrity_verify_fn nvme_update_ns_info nvme_update_disk_info blk_integrity_unregister ---set queue->integrity as 0 bio_integrity_process --access bi->profile->verify_fn(bi is a pointer of queue->integity) Before calling blk_integrity_unregister in nvme_update_disk_info, we must make sure that there is no work item in the kintegrityd_wq. Just call blk_flush_integrity to flush the work queue so the bug can be resolved. Signed-off-by: Lihong Kou <[email protected]> [hch: split up and shortened the changelog] Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-14block: check if a profile is actually registered in blk_integrity_unregisterChristoph Hellwig1-1/+5
While clearing the profile itself is harmless, we really should not clear the stable writes flag if it wasn't set due to a registered integrity profile. Reported-by: Lihong Kou <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-14nvme-tcp: fix io_work priority inversionKeith Busch1-10/+10
Dispatching requests inline with the .queue_rq() call may block while holding the send_mutex. If the tcp io_work also happens to schedule, it may see the req_list is non-empty, leaving "pending" true and remaining in TASK_RUNNING. Since io_work is of higher scheduling priority, the .queue_rq task may not get a chance to run, blocking forward progress and leading to io timeouts. Instead of checking for pending requests within io_work, let the queueing restart io_work outside the send_mutex lock if there is more work to be done. Fixes: a0fdd1418007f ("nvme-tcp: rerun io_work if req_list is not empty") Reported-by: Samuel Jones <[email protected]> Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-14nvme-rdma: destroy cm id before destroy qp to avoid use after freeRuozhu Li1-13/+3
We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. Signed-off-by: Ruozhu Li <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-14nvme-multipath: fix ANA state updates when a namespace is not presentAnton Eidelman1-2/+5
nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by: Anton Eidelman <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]>
2021-09-13nvme: avoid race in shutdown namespace removalDaniel Wagner1-8/+7
When we remove the siblings entry, we update ns->head->list, hence we can't separate the removal and test for being empty. They have to be in the same critical section to avoid a race. To avoid breaking the refcounting imbalance again, add a list empty check to nvme_find_ns_head. Fixes: 5396fdac56d8 ("nvme: fix refcounting imbalance when all paths are down") Signed-off-by: Daniel Wagner <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Tested-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-13nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()Dan Carpenter1-1/+1
This was intended to limit the number of characters printed from "subsys->serial" to NVMET_SN_MAX_SIZE. But accidentally the width specifier was used instead of the precision specifier so it only affects the alignment and not the number of characters printed. Fixes: f04064814c2a ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-09-12blk-mq: avoid to iterate over stale requestMing Lei1-1/+1
blk-mq can't run allocating driver tag and updating ->rqs[tag] atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver tag is released. So there is chance to iterating over one stale request just after the tag is allocated and before updating ->rqs[tag]. scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi in-flight requests after scsi host is blocked, so no new scsi command can be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT, but this request may have been kept in another slot of ->rqs[], meantime the slot can be allocated out but ->rqs[] isn't updated yet. Then this in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes trouble in handling scsi error. Fixes the issue by not iterating over stale request. Cc: [email protected] Cc: "Martin K. Petersen" <[email protected]> Reported-by: luojiaxing <[email protected]> Signed-off-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-12Linux 5.15-rc1Linus Torvalds1-2/+2
2021-09-12Merge tag 'perf-tools-for-v5.15-2021-09-11' of ↵Linus Torvalds36-175/+1147
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
2021-09-12Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of ↵Linus Torvalds4-9/+26
git://github.com/ojeda/linux Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
2021-09-12Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linuxLinus Torvalds5-21/+36
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example
2021-09-12Merge tag 'smp-urgent-2021-09-12' of ↵Linus Torvalds8-165/+598
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
2021-09-12Merge tag 'char-misc-5.15-rc1-lkdtm' of ↵Linus Torvalds2-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
2021-09-12Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-12/+11
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
2021-09-12Merge tag 'sched_urgent_for_v5.15_rc1' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
2021-09-12Merge tag 'locking_urgent_for_v5.15_rc1' of ↵Linus Torvalds4-94/+120
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
2021-09-12Merge tag 'timers_urgent_for_v5.15_rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
2021-09-12Merge branch 'misc.namei' of ↵Linus Torvalds2-59/+58
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
2021-09-12Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-21/+37
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
2021-09-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds41-325/+4127
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-11Merge tag 'riscv-for-linus-5.15-mw1' of ↵Linus Torvalds10-15/+22
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
2021-09-11Merge branch 'for-5.15' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive
2021-09-11tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo1-2/+12
Picking the changes from: 17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-81/+417
To pick the changes in: b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management") 81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete") 7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI") c649432e86ca677d ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jason Ekstrand <[email protected]> Cc: John Harrison <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Matthew Brost <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11tools headers UAPI: Sync linux/fs.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the change in: 7957d93bf32bc211 ("block: add ioctl to read the disk sequence number") It adds a new ioctl, but we are still not using that to generate tables for 'perf trace', so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Jens Axboe <[email protected]> Cc: Matteo Croce <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11tools headers UAPI: Sync linux/in.h copy with the kernel sourcesArnaldo Carvalho de Melo1-10/+32
To pick the changes in: db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member") That don't result in any change in tooling, the structs changed remains with the same layout. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <[email protected]> Cc: Gustavo A. R. Silva <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Add an option to build without libbfdIan Rogers1-22/+25
Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/[email protected]/T/#u Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: tony garnock-jones <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Allow build-id with trailing zerosNamhyung Kim1-0/+10
Currently perf saves a build-id with size but old versions assumes the size of 20. In case the build-id is less than 20 (like for MD5), it'd fill the rest with 0s. I saw a problem when old version of perf record saved a binary in the build-id cache and new version of perf reads the data. The symbols should be read from the build-id cache (as the path no longer has the same binary) but it failed due to mismatch in the build-id. symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf. The build-id event in the data has 20 byte build-ids, but it saw a different size (16) when it reads the build-id of the elf file in the build-id cache. $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf Displaying notes found in: .note.gnu.build-id Owner Data size Description GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring) Build ID: 53e4c2f42a4c61a2d632d92a72afa08f Let's fix this by allowing trailing zeros if the size is different. Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Fix hybrid config terms list corruptionAdrian Hunter2-9/+27
A config terms list was spliced twice, resulting in a never-ending loop when the list was traversed. Fix by using list_splice_init() and copying and freeing the lists as necessary. This patch also depends on patch "perf tools: Factor out copy_config_terms() and free_config_terms()" Example on ADL: Before: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & # jobs [1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname # perf top -E 10 PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 97.60% perf [.] __evsel__get_config_term 0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13 0.24% perf [.] kallsyms__parse 0.15% [kernel] [k] _raw_spin_lock 0.14% [kernel] [k] number 0.13% [kernel] [k] advance_transaction 0.08% [kernel] [k] format_decode 0.08% perf [.] map__process_kallsym_symbol 0.08% perf [.] rb_insert_color 0.08% [kernel] [k] vsnprintf exiting. # kill %1 After: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # perf script | head perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms]) Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events") Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events") Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Link: https //lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Factor out copy_config_terms() and free_config_terms()Adrian Hunter3-13/+19
Factor out copy_config_terms() and free_config_terms() so that they can be reused. Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Link: https //lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Fix perf_event_attr__fprintf() missing/dupl. fieldsAdrian Hunter1-1/+4
Some fields are missing and text_poke is duplicated. Fix that up. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11perf tools: Ignore Documentation dependency fileIan Rogers1-0/+1
When building directly on the checked out repository the build process produces a file that should be ignored, so add it to .gitignore. Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-11Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds2-13/+44
Pull io_uring fixes from Jens Axboe: - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right now as we have plenty of flags left, but could become one. (Hao) - Fix lockdep issue introduced in this merge window (me) - Fix a few issues with the worker creation (me, Pavel, Qiang) - Fix regression with wq_has_sleeper() for IOPOLL (Pavel) - Timeout link error propagation fix (Pavel) * tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block: io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT io_uring: fail links of cancelled timeouts io-wq: fix memory leak in create_io_worker() io-wq: fix silly logic error in io_task_work_match() io_uring: drop ctx->uring_lock before acquiring sqd->lock io_uring: fix missing mb() before waitqueue_active io-wq: fix cancellation on create-worker failure
2021-09-11Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds22-682/+805
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix nvmet command set reporting for passthrough controllers (Adam Manzanares) - update a MAINTAINERS email address (Chaitanya Kulkarni) - set QUEUE_FLAG_NOWAIT for nvme-multipth (me) - handle errors from add_disk() (Luis Chamberlain) - update the keep alive interval when kato is modified (Tatsuya Sasaki) - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke) - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner) - only call synchronize_srcu when clearing current path (Daniel Wagner) - revalidate paths during rescan (Hannes Reinecke) - Split out the fs/block_dev into block/fops.c and block/bdev.c, which has been long overdue. Do this now before -rc1, to avoid annoying conflicts due to this (Christoph) - blk-throtl use-after-free fix (Li) - Improve plug depth for multi-device plugs, greatly increasing md resync performance (Song) - blkdev_show() locking fix (Tetsuo) - n64cart error check fix (Yang) * tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block: n64cart: fix return value check in n64cart_probe() blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues block: move fs/block_dev.c to block/bdev.c block: split out operations on block special files blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() block: genhd: don't call blkdev_show() with major_names_lock held nvme: update MAINTAINERS email address nvme: add error handling support for add_disk() nvme: only call synchronize_srcu when clearing current path nvme: update keep alive interval when kato is modified nvme-tcp: Do not reset transport on data digest errors nvmet: fixup buffer overrun in nvmet_subsys_attr_serial() nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req nvmet: looks at the passthrough controller when initializing CAP nvme: move nvme_multi_css into nvme.h nvme-multipath: revalidate paths during rescan nvme-multipath: set QUEUE_FLAG_NOWAIT
2021-09-11Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull libata maintainer update from Jens Axboe: "Damien agreed to take over maintainership of libata, and he would be a great candidate for it. Update the MAINTAINERS entry to reflect the change in maintainer and git tree" * tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block: libata: pass over maintainership to Damien Le Moal
2021-09-11Merge tag 'trace-v5.15-3' of ↵Linus Torvalds3-25/+24
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Minor fixes to the processing of the bootconfig tree" * tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey() tracing/boot: Fix to check the histogram control param is a leaf node tracing/boot: Fix trace_boot_hist_add_array() to check array is value
2021-09-11Merge tag 'devicetree-fixes-for-5.15-1' of ↵Linus Torvalds5-16/+17
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable fw_devlinks on x86 DT platforms to fix OLPC - More replacing oneOf+const with enum on a few new schemas - Drop unnecessary type references on Xilinx SPI binding schema * tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: spi: dt-bindings: xilinx: Drop type reference on *-bits properties dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries of: property: Disable fw_devlink DT support for X86
2021-09-11Merge tag 'clk-for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One patch to fix an unused variable warning in a Qualcomm clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sm6350: Remove unused variable
2021-09-11Merge tag 'rtc-5.15' of ↵Linus Torvalds9-64/+243
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The broken down time conversion is similar to what is done in the time subsystem since v5.14. The rest is fairly straightforward. Subsystem: - Switch to Neri and Schneider time conversion algorithm Drivers: - rx8025: add rx8035 support - s5m: modernize driver and set range" * tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rx8010: select REGMAP_I2C dt-bindings: rtc: add Epson RX-8025 and RX-8035 rtc: rx8025: implement RX-8035 support rtc: cmos: remove stale REVISIT comments rtc: tps65910: Correct driver module alias rtc: move RTC_LIB_KUNIT_TEST to proper location rtc: lib_test: add MODULE_LICENSE rtc: Improve performance of rtc_time64_to_tm(). Add tests. rtc: s5m: set range rtc: s5m: enable wakeup only when available rtc: s5m: signal the core when alarm are not available rtc: s5m: switch to devm_rtc_allocate_device
2021-09-11Merge tag 'firewire-update' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: - Migrate the bus snooper driver 'nosy' from PCI to DMA API - Small janitorial cleanup in the IPv4/v6-over-1394 driver [ The 'nosy' change already come in as a different commit through Greg KH in the misc tree back in the previous merge window, so only the cleanup ends up being new to 5.15 - Linus ] * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: switch from 'pci_' to 'dma_' API firewire: net: remove unused variable 'guid'
2021-09-11Merge tag 'pwm/for-5.15-rc1' of ↵Linus Torvalds43-440/+260
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes this time around are mostly janitorial in nature. A lot of this is simplifications of drivers using device-managed functions and improving compilation coverage. The Mediatek display PWM driver now supports the atomic API. Cleanups and minor fixes make up the remainder of this set" * tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits) pwm: mtk-disp: Implement atomic API .get_state() pwm: mtk-disp: Fix overflow in period and duty calculation pwm: mtk-disp: Implement atomic API .apply() pwm: mtk-disp: Adjust the clocks to avoid them mismatch dt-bindings: pwm: rockchip: Add description for rk3568 pwm: Make pwmchip_remove() return void pwm: sun4i: Don't check the return code of pwmchip_remove() pwm: sifive: Don't check the return code of pwmchip_remove() pwm: samsung: Don't check the return code of pwmchip_remove() pwm: renesas-tpu: Don't check the return code of pwmchip_remove() pwm: rcar: Don't check the return code of pwmchip_remove() pwm: pca9685: Don't check the return code of pwmchip_remove() pwm: omap-dmtimer: Don't check the return code of pwmchip_remove() pwm: mtk-disp: Don't check the return code of pwmchip_remove() pwm: imx-tpm: Don't check the return code of pwmchip_remove() pwm: img: Don't check the return code of pwmchip_remove() pwm: cros-ec: Don't check the return code of pwmchip_remove() pwm: brcmstb: Don't check the return code of pwmchip_remove() pwm: atmel-tcb: Don't check the return code of pwmchip_remove() pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove() ...
Powered by cgit, Gruvboxed by Blaster4385.