aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-04-18md - remove old plugging code.NeilBrown4-104/+8
md has some plugging infrastructure for RAID5 to use because the normal plugging infrastructure required a 'request_queue', and when called from dm, RAID5 doesn't have one of those available. This relied on the ->unplug_fn callback which doesn't exist any more. So remove all of that code, both in md and raid5. Subsequent patches with restore the plugging functionality. Signed-off-by: NeilBrown <[email protected]>
2011-04-18md/dm - remove remains of plug_fn callback.NeilBrown2-9/+0
Now that unplugging is done differently, the unplug_fn callback is never called, so it can be completely discarded. Signed-off-by: NeilBrown <[email protected]>
2011-04-18md: use new plugging interface for RAID IO.NeilBrown3-1/+10
md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <[email protected]>
2011-04-18block: drop queue lock before calling __blk_run_queue() for kblockd puntJens Axboe1-8/+25
If we know we are going to punt to kblockd, we can drop the queue lock before calling into __blk_run_queue() since it only does a safe bit test and a workqueue call. Since kblockd needs to grab this very lock as one of the first things it does, it's a good optimization to drop the lock before waking kblockd. Signed-off-by: Jens Axboe <[email protected]>
2011-04-18Revert "block: add callback function for unplug notification"Jens Axboe3-22/+0
MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f75664570d8b75469cc468f23c2b27220984983b. Conflicts: block/blk-core.c Signed-off-by: Jens Axboe <[email protected]>
2011-04-18block: Enhance new plugging support to support general callbacksNeilBrown2-1/+26
md/raid requires an unplug callback, but as it does not uses requests the current code cannot provide one. So allow arbitrary callbacks to be attached to the blk_plug. Signed-off-by: NeilBrown <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-04-17ip6_pol_route panic: Do not allow VLAN on loopbackKrishna Kumar1-1/+2
Several tests in the ipv6 routing code check IFF_LOOPBACK, and allowing stacking such as VLAN'ing on top of loopback results in a netdevice which reports IFF_LOOPBACK but really isn't the loopback device. Instead of spamming the ipv6 routing code with even more special tests, simply disallow VLAN over loopback. The result of this patch is: # modprobe 8021q # vconfig add lo 43 ERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported Signed-off-by: Krishna Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-18powerpc/powermac: Build fix with SMP and CPU hotplugBenjamin Herrenschmidt1-3/+5
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18powerpc/perf_event: Skip updating kernel counters if register value shrinksEric B Munson1-7/+30
Because of speculative event roll back, it is possible for some event coutners to decrease between reads on POWER7. This causes a problem with the way that counters are updated. Delta calues are calculated in a 64 bit value and the top 32 bits are masked. If the register value has decreased, this leaves us with a very large positive value added to the kernel counters. This patch protects against this by skipping the update if the delta would be negative. This can lead to a lack of precision in the coutner values, but from my testing the value is typcially fewer than 10 samples at a time. Signed-off-by: Eric B Munson <[email protected]> Cc: [email protected] Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabledStefan Roese1-1/+1
This problem was noticed on an MPC855T platform. Ftrace did oops when trying to write to the kernel text segment. Many thanks to Joakim for finding the root cause of this problem. Signed-off-by: Stefan Roese <[email protected]> Cc: Joakim Tjernlund <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Steven Rostedt <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18powerpc: Fix oops if scan_dispatch_log is called too earlyAnton Blanchard1-0/+3
We currently enable interrupts before the dispatch log for the boot cpu is setup. If a timer interrupt comes in early enough we oops in scan_dispatch_log: Unable to handle kernel paging request for data at address 0x00000010 ... .scan_dispatch_log+0xb0/0x170 .account_system_vtime+0xa0/0x220 .irq_enter+0x88/0xc0 .do_IRQ+0x48/0x230 The patch below adds a check to scan_dispatch_log to ensure the dispatch log has been allocated. Signed-off-by: Anton Blanchard <[email protected]> Cc: <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18powerpc/pseries: Use a kmem cache for DTL buffersNishanth Aravamudan1-2/+10
PAPR specifies that DTL buffers can not cross AMS environments (aka CMO in the PAPR) and can not cross a memory entitlement granule boundary (4k). This is found in section 14.11.3.2 H_REGISTER_VPA of the PAPR. kmalloc does not guarantee an alignment of the allocation, though, beyond 8 bytes (at least in my understanding). Create a special kmem cache for DTL buffers with the alignment requirement. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18powerpc/kexec: Fix regression causing compile failure on UPPaul Gortmaker1-6/+6
Recent commit b987812b3fcaf70fdf0037589e5d2f5f2453e6ce caused a compile failure on UP because a considerably large block of the file was included within CONFIG_SMP, hence making a stub function not exposed on UP builds when it needed to be. Relocate the stub to the #else /* ! CONFIG_SMP */ section and also annotate the relevant else/endif so that nobody else falls into the same trap I did. Reported-by: Michael Guntsche <[email protected]> Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-18Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt5-7/+26
2011-04-17bnx2x: Fix port identification problemYaniv Rosner1-5/+4
This patch fixes port identification on optic devices when there's no link on the port. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-17r8169: add Realtek as maintainer.Francois Romieu1-0/+1
Per Hayes's request. Signed-off-by: Francois Romieu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-17Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-5/+23
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-algo-bit: Call pre/post_xfer for bit_test i2c: Improve deprecation warnings
2011-04-17Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds3-19/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not used ARM: SAMSUNG: Fix build failure in PM CRC check code ARM: S5P: Remove unused s3c_pm_check_resume_pin
2011-04-17alpha: Fix uninitialized value in read_persistent_clock.Richard Henderson1-0/+1
Signed-off-by: Richard Henderson <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-04-17alpha: Fix RTC interrupt setup.Richard Henderson1-1/+1
Following commit 091738a266fc ("genirq: Remove real old transition functions") we removed an automatic conversion of no_irq_chip to dummy_irq_chip. This change needs to be propagated back into the alpha backend. Signed-off-by: Richard Henderson <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-04-17alpha: Remove set but unused variables.Richard Henderson5-17/+13
This is a new warning in gcc 4.6. Several of these variables are used within #if 0 code, which probably ought to be removed. Most of the changes are legitimate cleanups. Signed-off-by: Richard Henderson <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-04-17alpha: Don't force -Werror.Richard Henderson1-1/+1
There are outstanding gcc 4.6 warnings that need to be cleaned up in the subdirectory. No sense forcing the issue immediately. Signed-off-by: Richard Henderson <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-04-17fs: synchronize_rcu when unregister_filesystem success not failureMilton Miller1-2/+1
While checking unregister_filesystem for saftey vs extra calls for "ext4: register ext2 and ext3 alias after ext4" I realized that the synchronize_rcu() was called on the error path but not on the success path. Cc: stable (2.6.38) Signed-off-by: Milton Miller <[email protected]> [ This probably won't really make a difference since commit d863b50ab013 ("vfs: call rcu_barrier after ->kill_sb()"), but it's the right thing to do. - Linus ] Signed-off-by: Linus Torvalds <[email protected]>
2011-04-17i2c-algo-bit: Call pre/post_xfer for bit_testAlex Deucher1-3/+19
Apparently some distros set i2c-algo-bit.bit_test to 1 by default. In some cases this causes i2c_bit_add_bus to fail and prevents the i2c bus from being added. In the radeon case, we fail to add the ddc i2c buses which prevents the driver from being able to detect attached monitors. The i2c bus works fine even if bit_test fails. This is likely due to gpio switching that is required and handled in the pre/post_xfer hooks, so call the pre/post_xfer hooks in the bit test as well. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=36221 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Cc: [email protected] [.38 down to .34]
2011-04-17i2c: Improve deprecation warningsJean Delvare1-2/+4
When warning on the use of deprecated i2c_driver methods attach_adapter and detach_adapter, mention the name of the driver which needs to be updated. Signed-off-by: Jean Delvare <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]>
2011-04-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds5-19/+45
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: make unplug timer trace event correspond to the schedule() unplug block: let io_schedule() flush the plug inline
2011-04-16Merge branch 'usb-linus' of ↵Linus Torvalds33-219/+483
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (43 commits) Revert "USB: isp1760-hcd: move imask clear after pending work is done" xHCI: Implement AMD PLL quirk xhci: Tell USB core both roothubs lost power. usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub USB: Fix unplug of device with active streams USB: xhci - also free streams when resetting devices xhci: Fix NULL pointer deref in handle_port_status() USB: xhci - fix math in xhci_get_endpoint_interval() USB: xhci: simplify logic of skipping missed isoc TDs USB: xhci - remove excessive 'inline' markings USB: xhci: unsigned char never equals -1 USB: xhci - fix unsafe macro definitions USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices USB: isp1760-hcd: move imask clear after pending work is done USB: fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0 usb: qcserial add missing errorpath kfrees usb: qcserial avoid pointing to freed memory usb: Fix qcserial memory leak on rmmod USB: ftdi_sio: add ids for Hameg HO720 and HO730 USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem. ...
2011-04-16Merge branches 'core-fixes-for-linus', 'perf-fixes-for-linus', ↵Linus Torvalds14-18/+104
'sched-fixes-for-linus', 'timer-fixes-for-linus' and 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Set FLAGS_HAS_TIMEOUT during futex_wait restart setup * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_event: Fix cgrp event scheduling bug in perf_enable_on_exec() perf: Fix a build error with some GCC versions * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix erroneous all_pinned logic sched: Fix sched-domain avg_load calculation * 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: rtc-mrst: follow on to the change of rtc_device_register() RTC: add missing "return 0" in new alarm func for rtc-bfin.c RTC: Fix s3c compile error due to missing s3c_rtc_setpie RTC: Fix early irqs caused by calling rtc_set_alarm too early * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd: Disable GartTlbWlkErr when BIOS forgets it x86, NUMA: Fix fakenuma boot failure x86/mrst: Fix boot crash caused by incorrect pin to irq mapping x86/ce4100: Add reg property to bridges
2011-04-16block: make unplug timer trace event correspond to the schedule() unplugJens Axboe3-18/+31
It's a pretty close match to what we had before - the timer triggering would mean that nobody unplugged the plug in due time, in the new scheme this matches very closely what the schedule() unplug now is. It's essentially the difference between an explicit unplug (IO unplug) or an implicit unplug (timer unplug, we scheduled with pending IO queued). Signed-off-by: Jens Axboe <[email protected]>
2011-04-16block: let io_schedule() flush the plug inlineJens Axboe2-1/+14
Linus correctly observes that the most important dispatch cases are now done from kblockd, this isn't ideal for latency reasons. The original reason for switching dispatches out-of-line was to avoid too deep a stack, so by _only_ letting the "accidental" flush directly in schedule() be guarded by offload to kblockd, we should be able to get the best of both worlds. So add a blk_schedule_flush_plug() that offloads to kblockd, and only use that from the schedule() path. Signed-off-by: Jens Axboe <[email protected]>
2011-04-16Btrfs: avoid taking the chunk_mutex in do_chunk_allocJosef Bacik2-6/+28
Everytime we try to allocate disk space we try and see if we can pre-emptively allocate a chunk, but in the common case we don't allocate anything, so there is no sense in taking the chunk_mutex at all. So instead if we are allocating a chunk, mark it in the space_info so we don't get two people trying to allocate at the same time. Thanks, Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: Liu Bo <[email protected]>
2011-04-16Btrfs end_bio_extent_readpage should look for locked bitsChris Mason1-1/+1
A recent commit caches the extent state in end_bio_extent_readpage, but the search it does should look for locked extents. This fixes things to make it more effective. Signed-off-by: Chris Mason <[email protected]>
2011-04-15Merge branch 'for-linus' of ↵Linus Torvalds11-78/+84
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p: nwname should be an unsigned int 9p: Fix sparse error fs/9p: Fix error reported by coccicheck 9p: revert tsyncfs related changes fs/9p: Use write_inode for data sync on server fs/9p: Fix revalidate to return correct value
2011-04-15Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds2-6/+9
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: fix error check in tegra2_clocks.c ARM: tegra: gpio: Fix unused variable warnings
2011-04-15Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds28-52/+108
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6879/1: fix personality test wrt usage of domain handlers ARM: 6878/1: fix personality flag propagation across an exec ARM: 6877/1: the ADDR_NO_RANDOMIZE personality flag should be honored with mmap() ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio() ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt number ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt number ARM: pxa: always clear LPM bits for PXA168 MFPR pcmcia: limit pxa2xx_trizeps4 subdriver to trizeps4 platform pcmcia: limit pxa2xx_balloon3 subdriver to balloon3 platform ARM: pxafb: Fix access to nonexistent member of pxafb_info ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile. ARM: 6868/1: Preserve the VFP state during fork ARM: 6867/1: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks ARM: 6866/1: Do not restrict HIGHPTE to !OUTER_CACHE ARM: 6865/1: perf: ensure pass through zero is counted on overflow ARM: 6864/1: hw_breakpoint: clear DBGVCR out of reset ARM: Only allow PM_SLEEP with CPUs which support suspend ARM: Make consolidated PM sleep code depend on PM_SLEEP
2011-04-15x86, amd: Disable GartTlbWlkErr when BIOS forgets itJoerg Roedel2-0/+23
This patch disables GartTlbWlk errors on AMD Fam10h CPUs if the BIOS forgets to do is (or is just too old). Letting these errors enabled can cause a sync-flood on the CPU causing a reboot. The AMD BKDG recommends disabling GART TLB Wlk Error completely. This patch is the fix for https://bugzilla.kernel.org/show_bug.cgi?id=33012 on my machine. Signed-off-by: Joerg Roedel <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Tested-by: Alexandre Demers <[email protected]> Cc: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2011-04-15vfs: Fix absolute RCU path walk failures due to uninitialized seq numberTim Chen1-0/+1
During RCU walk in path_lookupat and path_openat, the rcu lookup frequently failed if looking up an absolute path, because when root directory was looked up, seq number was not properly set in nameidata. We dropped out of RCU walk in nameidata_drop_rcu due to mismatch in directory entry's seq number. We reverted to slow path walk that need to take references. With the following patch, I saw a 50% increase in an exim mail server benchmark throughput on a 4-socket Nehalem-EX system. Signed-off-by: Tim Chen <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Cc: [email protected] (v2.6.38) Signed-off-by: Linus Torvalds <[email protected]>
2011-04-15net/9p: nwname should be an unsigned intHarsh Prateek Bora3-8/+8
Signed-off-by: Harsh Prateek Bora <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric VAn Hensbergen <[email protected]>
2011-04-159p: Fix sparse errorAneesh Kumar K.V3-6/+14
Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2011-04-15fs/9p: Fix error reported by coccicheckAneesh Kumar K.V1-1/+1
Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2011-04-159p: revert tsyncfs related changesAneesh Kumar K.V6-62/+11
Now that we use write_inode to flush server cache related to fid, we don't need tsyncfs either fort dotl or dotu protocols. For dotu this helps to do a more efficient server flush. Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2011-04-15fs/9p: Use write_inode for data sync on serverAneesh Kumar K.V1-0/+47
Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2011-04-15fs/9p: Fix revalidate to return correct valueAneesh Kumar K.V1-1/+3
revalidate should return > 0 on success. Also return 0 on ENOENT to force do_revalidate to return NULL dentry; Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Venkateswararao Jujjuri <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2011-04-15Btrfs: don't force chunk allocation in find_free_extentChris Mason1-22/+73
find_free_extent likes to allocate in contiguous clusters, which makes writeback faster, especially on SSD storage. As the FS fragments, these clusters become harder to find and we have to decide between allocating a new chunk to make more clusters or giving up on the cluster to allocate from the free space we have. Right now it creates too many chunks, and you can end up with a whole FS that is mostly empty metadata chunks. This commit changes the allocation code to be more strict and only allocate new chunks when we've made good use of the chunks we already have. Signed-off-by: Chris Mason <[email protected]>
2011-04-15x86, NUMA: Fix fakenuma boot failureKOSAKI Motohiro1-0/+23
Currently, numa=fake boot parameter is broken. If it's used, kernel may panic due to devide by zero error depending on CPU configuration Call Trace: [<ffffffff8104ad4c>] find_busiest_group+0x38c/0xd30 [<ffffffff81086aff>] ? local_clock+0x6f/0x80 [<ffffffff81050533>] load_balance+0xa3/0x600 [<ffffffff81050f53>] idle_balance+0xf3/0x180 [<ffffffff81550092>] schedule+0x722/0x7d0 [<ffffffff81550538>] ? wait_for_common+0x128/0x190 [<ffffffff81550a65>] schedule_timeout+0x265/0x320 [<ffffffff81095815>] ? lock_release_holdtime+0x35/0x1a0 [<ffffffff81550538>] ? wait_for_common+0x128/0x190 [<ffffffff8109bb6c>] ? __lock_release+0x9c/0x1d0 [<ffffffff815534e0>] ? _raw_spin_unlock_irq+0x30/0x40 [<ffffffff815534e0>] ? _raw_spin_unlock_irq+0x30/0x40 [<ffffffff81550540>] wait_for_common+0x130/0x190 [<ffffffff81051920>] ? try_to_wake_up+0x510/0x510 [<ffffffff8155067d>] wait_for_completion+0x1d/0x20 [<ffffffff8107f36c>] kthread_create_on_node+0xac/0x150 [<ffffffff81077bb0>] ? process_scheduled_works+0x40/0x40 [<ffffffff8155045f>] ? wait_for_common+0x4f/0x190 [<ffffffff8107a283>] __alloc_workqueue_key+0x1a3/0x590 [<ffffffff81e0cce2>] cpuset_init_smp+0x6b/0x7b [<ffffffff81df3d07>] kernel_init+0xc3/0x182 [<ffffffff8155d5e4>] kernel_thread_helper+0x4/0x10 [<ffffffff81553cd4>] ? retint_restore_args+0x13/0x13 [<ffffffff81df3c44>] ? start_kernel+0x400/0x400 [<ffffffff8155d5e0>] ? gs_change+0x13/0x13 The divede by zero is caused by the following line, group->cpu_power==0: kernel/sched_fair.c::update_sg_lb_stats() /* Adjust by relative CPU power of the group */ sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power; This regression was caused by commit e23bba6044 ("x86-64, NUMA: Unify emulated distance mapping") because it changes cpu -> node mapping in the process of dropping fake_physnodes(). old) all cpus are assinged node 0 now) cpus are assigned round robin (the logic is implemented by numa_init_array()) Note: The change in behavior only happens if the system doesn't have neither ACPI SRAT table nor AMD northbridge NUMA information. Round robin assignment doesn't work because init_numa_sched_groups_power() assumes all logical cpus in the same physical cpu share the same node (then it only accounts for group_first_cpu()), and the simple round robin breaks the above assumption. Thus, this patch implements a reassignment of node-ids if buggy firmware or numa emulation makes wrong cpu node map. Tt enforce all logical cpus in the same physical cpu share the same node. Signed-off-by: KOSAKI Motohiro <[email protected]> Acked-by: Tejun Heo <[email protected]> Cc: Yinghai Lu <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Cyrill Gorcunov <[email protected]> Cc: Shaohui Zheng <[email protected]> Cc: David Rientjes <[email protected]> Cc: H. Peter Anvin <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-04-15perf evsel: Fix use of inheritArnaldo Carvalho de Melo8-42/+41
perf stat doesn't mmap and its perfectly fine for it to use task-bound counters with inheritance. So set the attr.inherit on the caller and leave the syscall itself to validate it. When the mmap fails perf_evlist__mmap will just emit a warning if this is the failure reason. Reported-by: Peter Zijlstra <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-04-15perf hists browser: Fix seg fault when annotate null symbolLin Ming2-3/+5
In hists browser, press hotkey 'a' to annotate current symbol. Now it causes segment fault if 'a' is pressed on a null symbol. Here are 2 small bugs: - In perf_evsel__hists_browse, the condition check after 'a' is pressed is not correct, we should check ->sym instead of ->map. - In symbol__tui_annotate we must check whether sym is NULL or not before getting annotation structure. This patch fixes above 2 small bugs. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lin Ming <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-04-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds6-84/+78
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: only force kblockd unplugging from the schedule() path block: cleanup the block plug helper functions block, blk-sysfs: Use the variable directly instead of a function call block: move queue run on unplug to kblockd block: kill queue_sync_plugs() block: readd plug trace event block: add callback function for unplug notification block: add comment on why we save and disable interrupts in flush_plug_list() block: fixup block IO unplug trace call block: remove block_unplug_timer() trace point block: splice plug list to local context
2011-04-15Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds2-58/+97
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix compilation warnings when compiling with gcc 4.5 UBIFS: fix oops when R/O file-system is fsync'ed
2011-04-15futex: Set FLAGS_HAS_TIMEOUT during futex_wait restart setupDarren Hart1-1/+1
The FLAGS_HAS_TIMEOUT flag was not getting set, causing the restart_block to restart futex_wait() without a timeout after a signal. Commit b41277dc7a18ee332d in 2.6.38 introduced the regression by accidentally removing the the FLAGS_HAS_TIMEOUT assignment from futex_wait() during the setup of the restart block. Restore the originaly behavior. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=32922 Reported-by: Tim Smith <[email protected]> Reported-by: Torsten Hilbrich <[email protected]> Signed-off-by: Darren Hart <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: John Kacur <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/%3Cdaac0eb3af607f72b9a4d3126b2ba8fb5ed3b883.1302820917.git.dvhart%40linux.intel.com%3E Signed-off-by: Thomas Gleixner <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.