aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-27powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imcAthira Rajeev1-2/+2
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/perf: Fix crashes with generic_compat_pmu & BHRBAlexey Kardashevskiy1-5/+14
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver") Cc: [email protected] # v5.2+ Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/64s: Fix crash in load_fp_state() due to fpexc_modeMichael Ellerman1-3/+9
The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/64s: scv entry should set PPRNicholas Piggin1-0/+4
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27Documentation/powerpc: fix malformed table in syscall64-abiRandy Dunlap1-1/+3
Fix malformed table warning in powerpc/syscall64-abi.rst by making two tables and moving the headings. Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table. Text in column margin in table line 2. =========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile --- For the scv 0 instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) =========== ============= ======================================== Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=nMichael Ellerman1-0/+2
The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by: Michael Ellerman <[email protected]> Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27media: cedrus: Add missing v4l2_ctrl_request_hdl_put()Ezequiel Garcia1-1/+6
The check for a required control in the request was missing a call to v4l2_ctrl_request_hdl_put() in the error path. Fix it. Fixes: 50e761516f2b8c ("media: platform: Add Cedrus VPU decoder driver") Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-08-27media: vicodec: add missing v4l2_ctrl_request_hdl_put()Hans Verkuil1-0/+1
The check for a required control in the request was missing a call to v4l2_ctrl_request_hdl_put(), so the control request object was never released. Signed-off-by: Hans Verkuil <[email protected]> Fixes: 997deb811bf5 ("media: vicodec: Add support for stateless decoder.") Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-08-27x86/irq: Unbreak interrupt affinity settingThomas Gleixner1-7/+9
Several people reported that 5.8 broke the interrupt affinity setting mechanism. The consolidation of the entry code reused the regular exception entry code for device interrupts and changed the way how the vector number is conveyed from ptregs->orig_ax to a function argument. The low level entry uses the hardware error code slot to push the vector number onto the stack which is retrieved from there into a function argument and the slot on stack is set to -1. The reason for setting it to -1 is that the error code slot is at the position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax indicates that the entry came via a syscall. If it's not set to a negative value then a signal delivery on return to userspace would try to restart a syscall. But there are other places which rely on pt_regs::orig_ax being a valid indicator for syscall entry. But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the interrupt affinity setting mechanism, which was overlooked when this change was made. Moving interrupts on x86 happens in several steps. A new vector on a different CPU is allocated and the relevant interrupt source is reprogrammed to that. But that's racy and there might be an interrupt already in flight to the old vector. So the old vector is preserved until the first interrupt arrives on the new vector and the new target CPU. Once that happens the old vector is cleaned up, but this cleanup still depends on the vector number being stored in pt_regs::orig_ax, which is now -1. That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector always false. As a consequence the interrupt is moved once, but then it cannot be moved anymore because the cleanup of the old vector never happens. There would be several ways to convey the vector information to that place in the guts of the interrupt handling, but on deeper inspection it turned out that this check is pointless and a leftover from the old affinity model of X86 which supported multi-CPU affinities. Under this model it was possible that an interrupt had an old and a new vector on the same CPU, so the vector match was required. Under the new model the effective affinity of an interrupt is always a single CPU from the requested affinity mask. If the affinity mask changes then either the interrupt stays on the CPU and on the same vector when that CPU is still in the new affinity mask or it is moved to a different CPU, but it is never moved to a different vector on the same CPU. Ergo the cleanup check for the matching vector number is not required and can be removed which makes the dependency on pt_regs:orig_ax go away. The remaining check for new_cpu == smp_processsor_id() is completely sufficient. If it matches then the interrupt was successfully migrated and the cleanup can proceed. For paranoia sake add a warning into the vector assignment code to validate that the assumption of never moving to a different vector on the same CPU holds. Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs") Reported-by: Alex bykov <[email protected]> Reported-by: Avi Kivity <[email protected]> Reported-by: Alexander Graf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Alexander Graf <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-08-27x86/hotplug: Silence APIC only after all interrupts are migratedAshok Raj1-6/+20
There is a race when taking a CPU offline. Current code looks like this: native_cpu_disable() { ... apic_soft_disable(); /* * Any existing set bits for pending interrupt to * this CPU are preserved and will be sent via IPI * to another CPU by fixup_irqs(). */ cpu_disable_common(); { .... /* * Race window happens here. Once local APIC has been * disabled any new interrupts from the device to * the old CPU are lost */ fixup_irqs(); // Too late to capture anything in IRR. ... } } The fix is to disable the APIC *after* cpu_disable_common(). Testing was done with a USB NIC that provided a source of frequent interrupts. A script migrated interrupts to a specific CPU and then took that CPU offline. Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead") Reported-by: Evan Green <[email protected]> Signed-off-by: Ashok Raj <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mathias Nyman <[email protected]> Tested-by: Evan Green <[email protected]> Reviewed-by: Evan Green <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/r/[email protected]
2020-08-27USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt1-1/+1
This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <[email protected]> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Cyril Roelandt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()Tang Bin1-3/+2
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <[email protected]> Cc: stable <[email protected]> Signed-off-by: Tang Bin <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27USB: gadget: u_f: Unbreak offset calculation in VLAsAndy Shevchenko1-4/+4
Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: Brooke Basile <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-DAlan Stern1-0/+5
The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <[email protected]> Signed-off-by: Alan Stern <[email protected]> CC: <[email protected]> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()Dan Carpenter1-1/+1
The "page" pointer can be used with out being initialized. Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner1-1/+5
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27xen/xenbus: Fix granting of vmalloc'd memorySimon Leiner1-2/+8
On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27XEN uses irqdesc::irq_data_common::handler_data to store a per interruptThomas Gleixner1-8/+8
XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: [email protected] Reported-by: Roman Shaposhnik <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Roman Shaposhnik <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27Merge tag 'amd-drm-fixes-5.9-2020-08-26' of ↵Dave Airlie18-116/+164
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-27Merge tag 'drm-msm-fixes-2020-08-24' of ↵Dave Airlie12-25/+99
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
2020-08-27Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie2-7/+15
into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <[email protected]> From: Lucas Stach <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-27Merge tag 'exynos-drm-fixes-v5.9-rc3' of ↵Dave Airlie2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One fixup - Just drop __iommu annotation to fix sparse warning. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-26io_uring: clear req->result on IOPOLL re-issueJens Axboe1-0/+1
Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: [email protected] Reported-by: Andres Freund <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-26Merge branch 'net-fix-netpoll-crash-with-bnxt'David S. Miller3-10/+7
Jakub Kicinski says: ==================== net: fix netpoll crash with bnxt Rob run into crashes when using XDP on bnxt. Upon investigation it turns out that during driver reconfig irq core produces a warning message when IRQs are requested. This triggers netpoll, which in turn accesses uninitialized driver state. Same crash can also be triggered on this platform by changing the number of rings. Looks like we have two missing pieces here, netif_napi_add() has to make sure we start out with netpoll blocked. The driver also has to be more careful about when napi gets enabled. Tested XDP and channel count changes, the warning message no longer causes a crash. Not sure if the memory barriers added in patch 1 are necessary, but it seems we should have them. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt: don't enable NAPI until rings are readyJakub Kicinski1-8/+4
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <[email protected]> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26net: disable netpoll on fresh napisJakub Kicinski2-2/+3
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <[email protected]> Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26ipv4: Silence suspicious RCU usage warningIdo Schimmel1-1/+2
fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression. Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held. [1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020 Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26drivers/net/wan/lapbether: Set network_header before transmittingXie He1-0/+2
Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <[email protected]> Signed-off-by: Xie He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26mptcp: free acked data before waiting for more memoryFlorian Westphal1-2/+1
After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62d3f3 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26taprio: Fix using wrong queues in gate maskVinicius Costa Gomes1-6/+24
Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26xfs: fix boundary test in xfs_attr_shortform_verifyEric Sandeen1-1/+3
The boundary test for the fixed-offset parts of xfs_attr_sf_entry in xfs_attr_shortform_verify is off by one, because the variable array at the end is defined as nameval[1] not nameval[]. Hence we need to subtract 1 from the calculation. This can be shown by: # touch file # setfattr -n root.a file and verifications will fail when it's written to disk. This only matters for a last attribute which has a single-byte name and no value, otherwise the combination of namelen & valuelen will push endp further out and this test won't fail. Fixes: 1e1bbd8e7ee06 ("xfs: create structure verifier function for shortform xattrs") Signed-off-by: Eric Sandeen <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-08-26xfs: fix off-by-one in inode alloc block reservation calculationBrian Foster2-3/+3
The inode chunk allocation transaction reserves inobt_maxlevels-1 blocks to accommodate a full split of the inode btree. A full split requires an allocation for every existing level and a new root block, which means inobt_maxlevels is the worst case block requirement for a transaction that inserts to the inobt. This can lead to a transaction block reservation overrun when tmpfile creation allocates an inode chunk and expands the inobt to its maximum depth. This problem has been observed in conjunction with overlayfs, which makes frequent use of tmpfiles internally. The existing reservation code goes back as far as the Linux git repo history (v2.6.12). It was likely never observed as a problem because the traditional file/directory creation transactions also include worst case block reservation for directory modifications, which most likely is able to make up for a single block deficiency in the inode allocation portion of the calculation. tmpfile support is relatively more recent (v3.15), less heavily used, and only includes the inode allocation block reservation as tmpfiles aren't linked into the directory tree on creation. Fix up the inode alloc block reservation macro and a couple of the block allocator minleft parameters that enforce an allocation to leave enough free blocks in the AG for a full inobt split. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-08-26xfs: finish dfops on every insert range shift iterationBrian Foster1-1/+1
The recent change to make insert range an atomic operation used the incorrect transaction rolling mechanism. The explicit transaction roll does not finish deferred operations. This means that intents for rmapbt updates caused by extent shifts are not logged until the final transaction commits. Thus if a crash occurs during an insert range, log recovery might leave the rmapbt in an inconsistent state. This was discovered by repeated runs of generic/455. Update insert range to finish dfops on every shift iteration. This is similar to collapse range and ensures that intents are logged with the transactions that make associated changes. Fixes: dd87f87d87fa ("xfs: rework insert range into an atomic operation") Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu1-2/+8
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen1-0/+1
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin1-1/+1
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher1-0/+4
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <[email protected]> Acked-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas1-6/+3
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen1-0/+1
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan3-24/+21
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou1-2/+1
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu1-1/+1
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <[email protected]> Reviewed-by: Josip Pavic <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam1-0/+1
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Joshua Aberback <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung1-1/+1
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee3-22/+43
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen1-4/+2
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan1-2/+4
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan1-2/+4
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega10 swctf limit settingEvan Quan1-2/+5
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: set VCN pg per instancesJiansong Chen1-2/+2
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.