aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-10-05io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()Jeff Moyer1-6/+4
I received a bug report with the following signature: [ 1759.937637] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 1759.944564] #PF: supervisor read access in kernel mode [ 1759.949732] #PF: error_code(0x0000) - not-present page [ 1759.954901] PGD 7ab615067 P4D 7ab615067 PUD 7ab617067 PMD 0 [ 1759.960596] Oops: 0000 1 PREEMPT SMP PTI [ 1759.964804] CPU: 15 PID: 109 Comm: cpuhp/15 Kdump: loaded Tainted: G X ------- — 5.14.0-362.3.1.el9_3.x86_64 #1 [ 1759.976609] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018 [ 1759.985181] RIP: 0010:io_wq_for_each_worker.isra.0+0x24/0xa0 [ 1759.990877] Code: 90 90 90 90 90 90 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d 6f 78 53 48 8b 47 78 48 39 c5 74 4f 49 89 f5 49 89 d4 48 8d 58 e8 <8b> 13 85 d2 74 32 8d 4a 01 89 d0 f0 0f b1 0b 75 5c 09 ca 78 3d 48 [ 1760.009758] RSP: 0000:ffffb6f403603e20 EFLAGS: 00010286 [ 1760.015013] RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: 0000000000000000 [ 1760.022188] RDX: ffffb6f403603e50 RSI: ffffffffb11e95b0 RDI: ffff9f73b09e9400 [ 1760.029362] RBP: ffff9f73b09e9478 R08: 000000000000000f R09: 0000000000000000 [ 1760.036536] R10: ffffffffffffff00 R11: ffffb6f403603d80 R12: ffffb6f403603e50 [ 1760.043712] R13: ffffffffb11e95b0 R14: ffffffffb28531e8 R15: ffff9f7a6fbdf548 [ 1760.050887] FS: 0000000000000000(0000) GS:ffff9f7a6fbc0000(0000) knlGS:0000000000000000 [ 1760.059025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1760.064801] CR2: ffffffffffffffe8 CR3: 00000007ab610002 CR4: 00000000007706e0 [ 1760.071976] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1760.079150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1760.086325] PKRU: 55555554 [ 1760.089044] Call Trace: [ 1760.091501] <TASK> [ 1760.093612] ? show_trace_log_lvl+0x1c4/0x2df [ 1760.097995] ? show_trace_log_lvl+0x1c4/0x2df [ 1760.102377] ? __io_wq_cpu_online+0x54/0xb0 [ 1760.106584] ? __die_body.cold+0x8/0xd [ 1760.110356] ? page_fault_oops+0x134/0x170 [ 1760.114479] ? kernelmode_fixup_or_oops+0x84/0x110 [ 1760.119298] ? exc_page_fault+0xa8/0x150 [ 1760.123247] ? asm_exc_page_fault+0x22/0x30 [ 1760.127458] ? __pfx_io_wq_worker_affinity+0x10/0x10 [ 1760.132453] ? __pfx_io_wq_worker_affinity+0x10/0x10 [ 1760.137446] ? io_wq_for_each_worker.isra.0+0x24/0xa0 [ 1760.142527] __io_wq_cpu_online+0x54/0xb0 [ 1760.146558] cpuhp_invoke_callback+0x109/0x460 [ 1760.151029] ? __pfx_io_wq_cpu_offline+0x10/0x10 [ 1760.155673] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 1760.160320] cpuhp_thread_fun+0x8d/0x140 [ 1760.164266] smpboot_thread_fn+0xd3/0x1a0 [ 1760.168297] kthread+0xdd/0x100 [ 1760.171457] ? __pfx_kthread+0x10/0x10 [ 1760.175225] ret_from_fork+0x29/0x50 [ 1760.178826] </TASK> [ 1760.181022] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc vfat fat dm_multipath intel_rapl_msr intel_rapl_common isst_if_common ipmi_ssif nfit libnvdimm mgag200 i2c_algo_bit ioatdma drm_shmem_helper drm_kms_helper acpi_ipmi syscopyarea x86_pkg_temp_thermal sysfillrect ipmi_si intel_powerclamp sysimgblt ipmi_devintf coretemp acpi_power_meter ipmi_msghandler rapl pcspkr dca intel_pch_thermal intel_cstate ses lpc_ich intel_uncore enclosure hpilo mei_me mei acpi_tad fuse drm xfs sd_mod sg bnx2x nvme nvme_core crct10dif_pclmul crc32_pclmul nvme_common ghash_clmulni_intel smartpqi tg3 t10_pi mdio uas libcrc32c crc32c_intel scsi_transport_sas usb_storage hpwdt wmi dm_mirror dm_region_hash dm_log dm_mod [ 1760.248623] CR2: ffffffffffffffe8 A cpu hotplug callback was issued before wq->all_list was initialized. This results in a null pointer dereference. The fix is to fully setup the io_wq before calling cpuhp_state_add_instance_nocalls(). Signed-off-by: Jeff Moyer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-10-05cpufreq: schedutil: Update next_freq when cpufreq_limits changeXuewen Yan1-1/+2
When cpufreq's policy is 'single', there is a scenario that will cause sg_policy's next_freq to be unable to update. When the CPU's util is always max, the cpufreq will be max, and then if we change the policy's scaling_max_freq to be a lower freq, indeed, the sg_policy's next_freq need change to be the lower freq, however, because the cpu_is_busy, the next_freq would keep the max_freq. For example: The cpu7 is a single CPU: unisoc:/sys/devices/system/cpu/cpufreq/policy7 # while true;do done& [1] 4737 unisoc:/sys/devices/system/cpu/cpufreq/policy7 # taskset -p 80 4737 pid 4737's current affinity mask: ff pid 4737's new affinity mask: 80 unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_max_freq 2301000 unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_cur_freq 2301000 unisoc:/sys/devices/system/cpu/cpufreq/policy7 # echo 2171000 > scaling_max_freq unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_max_freq 2171000 At this time, the sg_policy's next_freq would stay at 2301000, which is wrong. To fix this, add a check for the ->need_freq_update flag. [ mingo: Clarified the changelog. ] Co-developed-by: Guohua Yan <[email protected]> Signed-off-by: Xuewen Yan <[email protected]> Signed-off-by: Guohua Yan <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: "Rafael J. Wysocki" <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-10-05platform/x86: touchscreen_dmi: Add info for the Positivo C4128BRenan Guilherme Lebre Ramos1-0/+23
Add information for the Positivo C4128B, a notebook/tablet convertible. Link: https://github.com/onitake/gsl-firmware/pull/217 Signed-off-by: Renan Guilherme Lebre Ramos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-10-05Merge tag 'net-6.6-rc5' of ↵Linus Torvalds112-597/+1355
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ...
2023-10-05Merge tag 'integrity-v6.6-fix' of ↵Linus Torvalds1-14/+8
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Two additional patches to fix the removal of the deprecated IMA_TRUSTED_KEYRING Kconfig" * tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: rework CONFIG_IMA dependency block ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
2023-10-05Merge tag 'leds-fixes-6.6' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED fix from Lee Jones: "Just the one bug-fix: - Fix regression affecting LED_COLOR_ID_MULTI users" * tag 'leds-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
2023-10-05Merge tag 'mfd-fixes-6.6' of ↵Linus Torvalds2-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: "A couple of small fixes: - Potential build failure in CS42L43 - Device Tree bindings clean-up for a superseded patch" * tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector" mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
2023-10-05Merge tag 'ovl-fixes-6.6-rc5' of ↵Linus Torvalds5-30/+28
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs fixes from Amir Goldstein: - Fix for file reference leak regression - Fix for NULL pointer deref regression - Fixes for RCU-walk race regressions: Two of the fixes were taken from Al's RCU pathwalk race fixes series with his consent [1]. Note that unlike most of Al's series, these two patches are not about racing with ->kill_sb() and they are also very recent regressions from v6.5, so I think it's worth getting them into v6.5.y. There is also a fix for an RCU pathwalk race with ->kill_sb(), which may have been solved in vfs generic code as you suggested, but it also rids overlayfs from a nasty hack, so I think it's worth anyway. Link: https://lore.kernel.org/linux-fsdevel/20231003204749.GA800259@ZenIV/ [1] * tag 'ovl-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fix NULL pointer defer when encoding non-decodable lower fid ovl: make use of ->layers safe in rcu pathwalk ovl: fetch inode once in ovl_dentry_revalidate_common() ovl: move freeing ovl_entry past rcu delay ovl: fix file reference leak when submitting aio
2023-10-05RDMA/core: Require admin capabilities to set system parametersLeon Romanovsky1-0/+1
Like any other set command, require admin permissions to do it. Cc: [email protected] Fixes: 2b34c5580226 ("RDMA/core: Add command to set ib_core device net namspace sharing mode") Link: https://lore.kernel.org/r/75d329fdd7381b52cbdf87910bef16c9965abb1f.1696443438.git.leon@kernel.org Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2023-10-05Merge branch 'mptcp-fixes-and-maintainer-email-update-for-v6-6'Jakub Kicinski6-46/+36
Mat Martineau says: ==================== mptcp: Fixes and maintainer email update for v6.6 Patch 1 addresses a race condition in MPTCP "delegated actions" infrastructure. Affects v5.19 and later. Patch 2 removes an unnecessary restriction that did not allow additional outgoing subflows using the local address of the initial MPTCP subflow. v5.16 and later. Patch 3 updates Matthieu's email address. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05MAINTAINERS: update Matthieu's email addressMatthieu Baerts2-1/+2
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05mptcp: userspace pm allow creating id 0 subflowGeliang Tang1-6/+0
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: [email protected] Suggested-by: Matthieu Baerts <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05mptcp: fix delegated action racesPaolo Abeni3-39/+34
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734318d ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: [email protected] Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05net: stmmac: remove unneeded stmmac_poll_controllerRemi Pommarel1-30/+0
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <[email protected]> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05net: lan743x: also select PHYLIBRandy Dunlap1-0/+1
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: lore.kernel.org/r/[email protected] Cc: Bryan Whitehead <[email protected]> Cc: [email protected] Reviewed-by: Simon Horman <[email protected]> Tested-by: Simon Horman <[email protected]> # build-tested Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-05net: ethernet: mediatek: disable irq before schedule napiChristian Marangi1-2/+2
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Cc: [email protected] Signed-off-by: Christian Marangi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-05HID: Add quirk to ignore the touchscreen battery on HP ENVY 15-eu0556ngFabian Vogt2-0/+3
Like various other devices using similar hardware, this model reports a perpetually empty battery (0-1%). Join the others and apply HID_BATTERY_QUIRK_IGNORE. Signed-off-by: Fabian Vogt <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bitSrinivas Pandruvada1-0/+8
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB") Reported-by: Kai-Heng Feng <[email protected]> Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/ Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: sony: remove duplicate NULL check before calling usb_free_urb()Jiri Kosina1-2/+1
usb_free_urb() does the NULL check itself, so there is no need to duplicate it prior to calling. Reported-by: kernel test robot <[email protected]> Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()") Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: nintendo: reinitialize USB Pro Controller after resuming from suspendMartino Fontana1-72/+103
When suspending the computer, a Switch Pro Controller connected via USB will lose its internal status. However, because the USB connection was technically never lost, when resuming the computer, the driver will attempt to communicate with the controller as if nothing happened (and fail). Because of this, the user was forced to manually disconnect the controller (or to press the sync button on the controller to power it off), so that it can be re-initialized. With this patch, the controller will be automatically re-initialized after resuming from suspend. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <[email protected]> Reviewed-by: Daniel J. Ogorchock <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: nvidia-shield: Fix some missing function calls() in the probe error ↵Christophe JAILLET1-2/+4
handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing calls. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe ↵Christophe JAILLET1-1/+2
error handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing call. Make sure it is safe to call in the probe error handling path by preventing the led_classdev from attempting to set the LED brightness to the off state on unregister. Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05HID: multitouch: Add required quirk for Synaptics 0xcd7e deviceRahul Rameshbabu1-0/+4
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <[email protected]> Closes: https://lore.kernel.org/linux-input/[email protected]/ Signed-off-by: Rahul Rameshbabu <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-10-05Merge branch 'net-mana-fix-some-tx-processing-bugs'Paolo Abeni2-67/+149
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang2-58/+138
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Shradha Gupta <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang1-2/+0
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: [email protected] Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Shradha Gupta <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang1-7/+11
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: [email protected] Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Shradha Gupta <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-10-05media: mediatek: vcodec: Fix encoder access NULL pointerIrui Wang1-1/+2
Need to set the private data with encoder device, or will access NULL pointer in encoder handler. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-10-05gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()Bartosz Golaszewski1-1/+1
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]>
2023-10-04ksmbd: fix race condition between tree conn lookup and disconnectNamjae Jeon6-17/+90
if thread A in smb2_write is using work-tcon, other thread B use smb2_tree_disconnect free the tcon, then thread A will use free'd tcon. Time + Thread A | Thread A smb2_write | smb2_tree_disconnect | | | kfree(tree_conn) | // UAF! | work->tcon->share_conf | + This patch add state, reference count and lock for tree conn to fix race condition issue. Reported-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG ↵Samson Tam2-4/+4
pipes only [Why] The edge-case DISPCLK WDIVIDER changes call stream_enc functions. But with MPC pipes, downstream pipes have null stream_enc and will cause crash. [How] Only call stream_enc functions for pipes that are OTG master. Reviewed-by: Alvin Lee <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Samson Tam <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amd: Fix detection of _PR3 on the PCIe root portMario Limonciello1-1/+1
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: [email protected] Suggested-by: Jun Ma <[email protected]> Tested-by: David Perry <[email protected]> Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()Mario Limonciello1-18/+23
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: [email protected] # 6.1+ Reported-and-tested-by: Umio Yasuno <[email protected]> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amdgpu: Fix a memory leakLuben Tuikov1-0/+1
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <[email protected]> Reported-by: Yang Wang <[email protected]> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amd/pm: add unique_id for gc 11.0.3Kenneth Feng1-0/+1
add unique_id for gc 11.0.3 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04ksmbd: fix race condition from parallel smb2 lock requestsNamjae Jeon1-11/+1
There is a race condition issue between parallel smb2 lock request. Time + Thread A | Thread A smb2_lock | smb2_lock | insert smb_lock to lock_list | spin_unlock(&work->conn->llist_lock) | | | spin_lock(&conn->llist_lock); | kfree(cmp_lock); | // UAF! | list_add(&smb_lock->llist, &rollback_list) + This patch swaps the line for adding the smb lock to the rollback list and adding the lock list of connection to fix the race issue. Reported-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04ksmbd: fix race condition from parallel smb2 logoff requestsNamjae Jeon1-8/+16
If parallel smb2 logoff requests come in before closing door, running request count becomes more than 1 even though connection status is set to KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever. This patch fix race condition problem by returning error if connection status was already set to KSMBD_SESS_NEED_RECONNECT. Reported-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04ksmbd: fix uaf in smb20_oplock_break_ackluosili1-2/+2
drop reference after use opinfo. Signed-off-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04ksmbd: fix race condition with fpNamjae Jeon3-4/+32
fp can used in each command. If smb2_close command is coming at the same time, UAF issue can happen by race condition. Time + Thread A | Thread B1 B2 .... B5 smb2_open | smb2_close | __open_id | insert fp to file_table | | | atomic_dec_and_test(&fp->refcount) | if fp->refcount == 0, free fp by kfree. // UAF! | use fp | + This patch add f_state not to use freed fp is used and not to free fp in use. Reported-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04ksmbd: fix race condition between session lookup and expireNamjae Jeon3-3/+10
Thread A + Thread B ksmbd_session_lookup | smb2_sess_setup sess = xa_load | | | xa_erase(&conn->sessions, sess->id); | | ksmbd_session_destroy(sess) --> kfree(sess) | // UAF! | sess->last_active = jiffies | + This patch add rwsem to fix race condition between ksmbd_session_lookup and ksmbd_expire_session. Reported-by: luosili <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04Merge tag 'rtla-v6.6-fixes' of ↵Linus Torvalds3-10/+32
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet1-4/+4
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long1-0/+1
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/[email protected]/msg590224.html Signed-off-by: Xin Long <[email protected]> Reviewed-by: Simon Horman <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long1-2/+1
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <[email protected]> Reviewed-by: Simon Horman <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04tcp: fix delayed ACKs for MSS boundary conditionNeal Cardwell1-0/+13
This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <[email protected]> Reviewed-by: Yuchung Cheng <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Cc: Xin Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell2-6/+7
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <[email protected]> Reviewed-by: Yuchung Cheng <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04Merge tag 'nf-23-10-04' of ↵Jakub Kicinski9-62/+395
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04page_pool: fix documentation typosRandy Dunlap1-3/+3
Correct grammar for better readability. Signed-off-by: Randy Dunlap <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Ilias Apalodimas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-04smb: client: do not start laundromat thread on nohandlecachePaulo Alcantara1-8/+8
Honor 'nohandlecache' mount option by not starting laundromat thread even when SMB server supports directory leases. Do not waste system resources by having laundromat thread running with no directory caching at all. Fixes: 2da338ff752a ("smb3: do not start laundromat thread when dir leases disabled") Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-04smb: use kernel_connect() and kernel_bind()Jordan Rife1-5/+5
Recent changes to kernel_connect() and kernel_bind() ensure that callers are insulated from changes to the address parameter made by BPF SOCK_ADDR hooks. This patch wraps direct calls to ops->connect() and ops->bind() with kernel_connect() and kernel_bind() to ensure that SMB mounts do not see their mount address overwritten in such cases. Link: https://lore.kernel.org/netdev/[email protected]/ Cc: <[email protected]> # 6.0+ Signed-off-by: Jordan Rife <[email protected]> Acked-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.