| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Why]
If mes is not dequeued during fini, mes will be in an uncleaned state
during reload, then mes couldn't receive some commands which leads to
reload failure.
[How]
Perform MES dequeue via MMIO after all the unmap jobs are done by mes
and before kiq fini.
v2: Move the dequeue operation inside kiq_hw_fini.
Signed-off-by: YuBiao Wang <[email protected]>
Reviewed-by: Jack Xiao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
enable thermal alert on smu_v13_0_10
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
L1 blocks most of GC registers accessing by MMIO.
[How]
Use RLCG interface to program GC registers under SRIOV VF in full access time.
Signed-off-by: Yifan Zha <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Currently, if we encounter unimplemented functions, it is difficult to
tell what caused them just by looking at dmesg and that is compounded by
the fact that it is often hard to reproduce said issues, for instance we
have had reports of this condition being triggered when removing a
secondary display that is setup in mirror mode and is connected using
usb-c. So, to have access to more detailed debugging information, add an
ASSERT() to dal_irq_service_ack() and dal_irq_service_set() that only
triggers when we encounter an unimplemented function.
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with
an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp():
[ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794)
Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.
Update the function pointer prototype to match reality so that there is
no more CFI violation.
Link: https://github.com/ClangBuiltLinux/linux/issues/1738
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in amdgpu/amdgpu_ttm.c is safe, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in amdgpu/amdgpu_ttm.c.
Suggested-by: Ira Weiny <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Fabio M. De Francesco <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Therefore, replace kmap() with kmap_local_page() in radeon_ttm_gtt_read().
Cc: "Venkataramanan, Anirudh" <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Christian König <[email protected]>
Suggested-by: Ira Weiny <[email protected]>
Signed-off-by: Fabio M. De Francesco <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Building 32-bit images may fail with the following error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:
In function ‘dml32_UseMinimumDCFCLK’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1:
error: the frame size of 1096 bytes is larger than 1024 bytes
This is seen when building i386:allmodconfig with any of the following
compilers.
gcc (Debian 12.2.0-3) 12.2.0
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0
The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY
because in that case CONFIG_FRAME_WARN is already set to 2048 even for
32-bit builds.
dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e433
("drm/amd/display: DML changes for DCN32/321"). It declares a large
number of local variables. Increase the frame size for the affected
file to 2048, similar to other files in the same directory, to enable
32-bit build tests with affected compilers.
Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Cc: Aurabindo Pillai <[email protected]>
Reported-by: Łukasz Bartosik <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
RAS error address translation algorithm is common
across dGPU and A + A platform as along as the SOC
integrates the same generation of UMC IP.
UMC RAS is managed by x86 MCA on A + A platform,
umc_ras in GPU driver is not initialized at all on
A + A platform. In such case, any umc_ras callback
implemented for dGPU config shouldn't be invoked
from A + A specific callback.
The change moves convert_error_address out of dGPU
umc_ras structure and makes it share between A + A
and dGPU config.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The pmfw has changed the driver interface version, so keep same with the
fw.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
Update the SMU driver interface version to V7.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
[Why]
In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't
be initialized. There will be a NULL pointer call trace after
removing the dpm check condition in amdgpu_pm_sysfs_fini.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu]
Call Trace:
<TASK>
amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu]
amdgpu_device_fini_hw+0xdf/0x290 [amdgpu]
[How]
List pm_attr_list should be initialized when dpm is disabled.
Fixes: a6ad27cec585fe ("drm/amd/pm: Remove redundant check condition")
Signed-off-by: ZhenGuo Yin <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
Fulfill the functionality for cstate control.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
Fulfill the functionality for cstate control.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
V2:
Add sriov vf ras support in amdgpu_ras_asic_supported.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
V1:
Enable ras support for CHIP_IP_DISCOVERY asic type.
V2:
1. Change commit comment.
2. Enable ras support for mp0 v13_0_0 and v13_0_10.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable gmc soft reset on gmc_v11_0_3.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Temporary disable mes self teset for gc 11.0.3.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
skip loading pptable from driver on secure board since it's loaded from psp.
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Guan Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
enable gfx clock gating features on smu_v13_0_10
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Jack Gui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
remove the pptable id override on smu_v13_0_10,
and the id is fetched from vbios now.
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail.
will enable it again after confirming the thermal hardware setting.
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 16fb4dca95daa9d8e037201166a58de8284f4268.
Unfortunately, that commit causes fan monitors can't be read and written
properly.
Fixes: 16fb4dca95daa9 ("drm/amdgpu: getting fan speed pwm for vega10 properly")
Signed-off-by: Asher Song <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- refactor mode2 on v11.0.7 to align with aldebaran
- comment out using mode2 reset as default for now, will introduce
another controller to replace previous reset_level_mask
v2: squash in unused variable removal (Alex)
Signed-off-by: Victor Zhao <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit dac6b80818ac2353631c5a33d140d8d5508e2957.
This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.
Fixes: dac6b80818ac23 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: Victor Zhao <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 5bd8d53f6fa53eab5433698d1362dae2aa53c1cc.
This commit breaks the reset logic for aldebaran, revert it for now.
Will move the mask inside the reset handler.
Fixes: 5bd8d53f6fa53e ("drm/amdgpu: add debugfs amdgpu_reset_level")
Signed-off-by: Victor Zhao <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime
Signed-off-by: Danijel Slivka <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
After commit 571c05365892 ("drm/amdgpu: switch sdma buffer function
tear down to a helper"), the variable 'ring' is not used anymore, it
can be removed.
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For consistency with the rest of the code.
Acked-by: Christian König <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For consistency with newer asics.
Acked-by: Christian König <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To match with the definition in psp firmware
Acked-by: Christian König <[email protected]>
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Le Ma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
more ip instances are available
Acked-by: Christian König <[email protected]>
Signed-off-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch to allow secure submission on gfx11 and sdma6.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Tim Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
this patch to add tmz support for GC 11.0.1.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Tim Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
|
|
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/[email protected] [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <[email protected]>
Reported-by: [email protected]
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
|
|
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
|
|
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/[email protected]/
Reported-and-tested-by: Guenter Roeck <[email protected]>
Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
|
|
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <[email protected]>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>
|
|
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <[email protected]>
Acked-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|