aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-07powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switchNicholas Piggin1-2/+4
The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: [email protected] # v5.14+ Reported-by: Sachin Sant <[email protected]> Tested-by: Sachin Sant <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-06ice: switch: fix potential memleak in ice_add_adv_recipe()Zhang Changzhong1-1/+1
When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Fix off by one in ice_tc_forward_to_queue()Dan Carpenter1-1/+1
The > comparison should be >= to prevent reading one element beyond the end of the array. The "vsi->num_rxq" is not strictly speaking the number of elements in the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and "vsi->num_rxq" is less than or equal to the number of elements in the array. The array is allocated in ice_vsi_alloc_arrays(). It's still an off by one but it might not access outside the end of the array. Fixes: 143b86f346c7 ("ice: Enable RX queue selection using skbedit action") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Amritha Nambiar <[email protected]> Tested-by: Bharathi Sreenivas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Fix disabling Rx VLAN filtering with port VLAN enabledBrett Creeley1-1/+15
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN filtering will be disabled if the VF requests to enable promiscuous mode. When the VF is in a port VLAN, this is the incorrect behavior because it will allow the VF to receive traffic outside of its port VLAN domain. Fortunately this only resulted in the VF(s) receiving broadcast traffic outside of the VLAN domain because all of the VLAN promiscuous rules are based on the port VLAN ID. Fix this by setting the .disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on the VF. Also, make sure to make this fix for both Single VLAN Mode and Double VLAN Mode enabled devices. Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Karen Ostrowska <[email protected]> Tested-by: Marek Szlosek <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-02-06ice: fix out-of-bounds KASAN warning in virtchnlMichal Swiatkowski2-18/+12
KASAN reported: [ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice] [ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402 [ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G B OE 6.1.0+ #3 [ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [ 9793.709245] Workqueue: ice ice_service_task [ice] [ 9793.709575] Call Trace: [ 9793.709582] <TASK> [ 9793.709588] dump_stack_lvl+0x44/0x5c [ 9793.709613] print_report+0x17f/0x47b [ 9793.709632] ? __cpuidle_text_end+0x5/0x5 [ 9793.709653] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.709986] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710317] kasan_report+0xb7/0x140 [ 9793.710335] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710673] ice_get_link_speed+0x16/0x30 [ice] [ 9793.711006] ice_vc_notify_vf_link_state+0x14c/0x160 [ice] [ 9793.711351] ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice] [ 9793.711698] ice_vc_process_vf_msg+0x7a7/0xc00 [ice] [ 9793.712074] __ice_clean_ctrlq+0x98f/0xd20 [ice] [ 9793.712534] ? ice_bridge_setlink+0x410/0x410 [ice] [ 9793.712979] ? __request_module+0x320/0x520 [ 9793.713014] ? ice_process_vflr_event+0x27/0x130 [ice] [ 9793.713489] ice_service_task+0x11cf/0x1950 [ice] [ 9793.713948] ? io_schedule_timeout+0xb0/0xb0 [ 9793.713972] process_one_work+0x3d0/0x6a0 [ 9793.714003] worker_thread+0x8a/0x610 [ 9793.714031] ? process_one_work+0x6a0/0x6a0 [ 9793.714049] kthread+0x164/0x1a0 [ 9793.714071] ? kthread_complete_and_exit+0x20/0x20 [ 9793.714100] ret_from_fork+0x1f/0x30 [ 9793.714137] </TASK> [ 9793.714151] The buggy address belongs to the variable: [ 9793.714158] ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice] [ 9793.714632] Memory state around the buggy address: [ 9793.714642] ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9 [ 9793.714656] ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 [ 9793.714680] ^ [ 9793.714690] ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714704] ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger than both legacy and normal link speed tables. Add one element (0 - unknown) to both tables. There is no need to explicitly set table size, leave it empty. Fixes: 1d0e28a9be1f ("ice: Remove and replace ice speed defines with ethtool.h versions") Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Do not use WQ_MEM_RECLAIM flag for workqueueAnirudh Venkataramanan1-1/+1
When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_release_driver_internal+0xfa/0x1c0 [ +0.000005] bus_remove_device+0x18a/0x260 [ +0.000007] device_del+0x2e5/0x650 [ +0.000005] ? __pfx_device_del+0x10/0x10 [ +0.000003] ? mutex_unlock+0x84/0xd0 [ +0.000004] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? _raw_spin_unlock+0x18/0x40 [ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice] [ +0.000160] ice_service_task+0x1309/0x14f0 [ice] [ +0.000134] ? __pfx___schedule+0x10/0x10 [ +0.000006] process_one_work+0x3b1/0x6c0 [ +0.000008] worker_thread+0x69/0x670 [ +0.000005] ? __kthread_parkme+0xec/0x110 [ +0.000007] ? __pfx_worker_thread+0x10/0x10 [ +0.000005] kthread+0x17f/0x1b0 [ +0.000005] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x29/0x50 [ +0.000009] </TASK> Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Anirudh Venkataramanan <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Jakub Andrysiak <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-07nvidiafb: detect the hardware support before removing console.Dave Airlie1-39/+42
This driver removed the console, but hasn't yet decided if it could take over the console yet. Instead of doing that, probe the hw for support and then remove the console afterwards. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216859 Fixes: 145eed48de27 ("fbdev: Remove conflicting devices on PCI bus") Reported-by: Zeno Davatz <[email protected]> Tested-by: Zeno Davatz <[email protected]> Tested-by: Thomas Zimmermann <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-06btrfs: simplify update of last_dir_index_offset when logging a directoryFilipe Manana2-8/+17
When logging a directory, we always set the inode's last_dir_index_offset to the offset of the last dir index item we found. This is using an extra field in the log context structure, and it makes more sense to update it only after we insert dir index items, and we could directly update the inode's last_dir_index_offset field instead. So make this simpler by updating the inode's last_dir_index_offset only when we actually insert dir index keys in the log tree, and getting rid of the last_dir_item_offset field in the log context structure. Reported-by: David Arendt <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reported-by: Maxim Mikityanskiy <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reported-by: Hunter Wardlaw <[email protected]> Link: https://bugzilla.suse.com/show_bug.cgi?id=1207231 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216851 CC: [email protected] # 6.1+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-02-06Merge tag 'cgroup-for-6.2-rc7-fixes' of ↵Linus Torvalds1-9/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "During the v6.2 cycle, there were a series of changes to task cpu affinity handling which fixed cpuset inadvertently clobbering user-configured affinity masks. Unfortunately, they broke the affinity handling on hybrid heterogeneous CPUs which have cores that can execute both 64 and 32bit along with cores that can only execute 32bit code. This contains two fix patches for the above issue. While reverting the changes that caused the regression is definitely an option, the origial patches do improve how cpuset behave signficantly in some cases and the fixes seem fairly safe, so I think it'd be better to try to fix them first" * tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
2023-02-06Merge tag 'for-6.2-rc7-tag' of ↵Linus Torvalds4-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - explicitly initialize zlib work memory to fix a KCSAN warning - limit number of send clones by maximum memory allocated - limit device size extent in case it device shrink races with chunk allocation - raid56 fixes: - fix copy&paste error in RAID6 stripe recovery - make error bitmap update atomic * tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: raid56: make error_bitmap update atomic btrfs: send: limit number of clones and allocated memory size btrfs: zlib: zero-initialize zlib workspace btrfs: limit device extents to the device size btrfs: raid56: fix stripes if vertical errors are found
2023-02-06Two bug fixes for tas5805m codec driverMark Brown1-41/+90
Merge series from Daniel Beer <[email protected]>: This pair of patches fixes two issues which crept in while revising the original submission, at a time when I no longer had access to test hardware. The fixes here have been tested and verified on hardware.
2023-02-06cpuset: Call set_cpus_allowed_ptr() with appropriate mask for taskWill Deacon1-7/+11
set_cpus_allowed_ptr() will fail with -EINVAL if the requested affinity mask is not a subset of the task_cpu_possible_mask() for the task being updated. Consequently, on a heterogeneous system with cpusets spanning the different CPU types, updates to the cgroup hierarchy can silently fail to update task affinities when the effective affinity mask for the cpuset is expanded. For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are the only cores capable of executing 32-bit tasks. Attaching a 32-bit task to a cpuset containing CPUs 0-2 will correctly affine the task to CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend the affinity mask of the 32-bit task because update_tasks_cpumask() will pass the full 0-3 mask to set_cpus_allowed_ptr(). Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater and use it to mask the 'effective_cpus' mask with the possible mask for each task being updated. Fixes: 431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()") Signed-off-by: Will Deacon <[email protected]> Acked-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-02-06cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top ↵Waiman Long1-2/+25
cpuset tasks Since commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling __sched_setaffinity() unconditionally. This helps to expose a bug in the current cpuset hotplug code where the cpumasks of the tasks in the top cpuset are not updated at all when some CPUs become online or offline. It is likely caused by the fact that some of the tasks in the top cpuset, like percpu kthreads, cannot have their cpu affinity changed. One way to reproduce this as suggested by Peter is: - boot machine - offline all CPUs except one - taskset -p ffffffff $$ - online all CPUs Fix this by allowing cpuset_cpus_allowed() to return a wider mask that includes offline CPUs for those tasks that are in the top cpuset. For tasks not in the top cpuset, the old rule applies and only online CPUs will be returned in the mask since hotplug events will update their cpumasks accordingly. Fixes: 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") Reported-by: Will Deacon <[email protected]> Originally-from: Peter Zijlstra (Intel) <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-02-06Merge tag 'sti-dt-for-6.3-round1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes Fix polarity of reset line of tsin0 port for stihxxx-b2120 * tag 'sti-dt-for-6.3-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-02-06Merge tag 'cpufreq-arm-fixes-6.2' of ↵Rafael J. Wysocki1-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar: - Fix the incorrect value returned by cpufreq driver's ->get() callback for Qualcomm platforms (Douglas Anderson). * tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
2023-02-06drm/virtio: exbuf->fence_fd unmodified on interrupted waitRyan Neph2-4/+2
An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1, making the retry attempt fail at sync_file_get_fence(). The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the passed value for exbuf->fence_fd when returning anything besides a successful result from the ioctl. Fixes: 2cd7b6f08bc4 ("drm/virtio: add in/out fence support for explicit synchronization") Signed-off-by: Ryan Neph <[email protected]> Reviewed-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-06ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41Stefan Binding1-0/+1
This Asus Zenbook laptop use Realtek HDA codec combined with 2xCS35L41 Amplifiers using I2C with External Boost. Signed-off-by: Stefan Binding <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-06HID: Ignore battery for ELAN touchscreen 29DF on HPLuka Guzenko2-0/+3
The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. Signed-off-by: Luka Guzenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06rtmutex: Ensure that the top waiter is always woken upWander Lairson Costa1-2/+3
Let L1 and L2 be two spinlocks. Let T1 be a task holding L1 and blocked on L2. T1, currently, is the top waiter of L2. Let T2 be the task holding L2. Let T3 be a task trying to acquire L1. The following events will lead to a state in which the wait queue of L2 isn't empty, but no task actually holds the lock. T1 T2 T3 == == == spin_lock(L1) | raw_spin_lock(L1->wait_lock) | rtlock_slowlock_locked(L1) | | task_blocks_on_rt_mutex(L1, T3) | | | orig_waiter->lock = L1 | | | orig_waiter->task = T3 | | | raw_spin_unlock(L1->wait_lock) | | | rt_mutex_adjust_prio_chain(T1, L1, L2, orig_waiter, T3) spin_unlock(L2) | | | | | rt_mutex_slowunlock(L2) | | | | | | raw_spin_lock(L2->wait_lock) | | | | | | wakeup(T1) | | | | | | raw_spin_unlock(L2->wait_lock) | | | | | | | | waiter = T1->pi_blocked_on | | | | waiter == rt_mutex_top_waiter(L2) | | | | waiter->task == T1 | | | | raw_spin_lock(L2->wait_lock) | | | | dequeue(L2, waiter) | | | | update_prio(waiter, T1) | | | | enqueue(L2, waiter) | | | | waiter != rt_mutex_top_waiter(L2) | | | | L2->owner == NULL | | | | wakeup(T1) | | | | raw_spin_unlock(L2->wait_lock) T1 wakes up T1 != top_waiter(L2) schedule_rtlock() If the deadline of T1 is updated before the call to update_prio(), and the new deadline is greater than the deadline of the second top waiter, then after the requeue, T1 is no longer the top waiter, and the wrong task is woken up which will then go back to sleep because it is not the top waiter. This can be reproduced in PREEMPT_RT with stress-ng: while true; do stress-ng --sched deadline --sched-period 1000000000 \ --sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20 done A similar issue was pointed out by Thomas versus the cases where the top waiter drops out early due to a signal or timeout, which is a general issue for all regular rtmutex use cases, e.g. futex. The problematic code is in rt_mutex_adjust_prio_chain(): // Save the top waiter before dequeue/enqueue prerequeue_top_waiter = rt_mutex_top_waiter(lock); rt_mutex_dequeue(lock, waiter); waiter_update_prio(waiter, task); rt_mutex_enqueue(lock, waiter); // Lock has no owner? if (!rt_mutex_owner(lock)) { // Top waiter changed ----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock)) ----> wake_up_state(waiter->task, waiter->wake_state); This only takes the case into account where @waiter is the new top waiter due to the requeue operation. But it fails to handle the case where @waiter is not longer the top waiter due to the requeue operation. Ensure that the new top waiter is woken up so in all cases so it can take over the ownerless lock. [ tglx: Amend changelog, add Fixes tag ] Fixes: c014ef69b3ac ("locking/rtmutex: Add wake_state to rt_mutex_waiter") Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
2023-02-06drm/i915: Initialize the obj flags for shmem objectsAravind Iddamsetty1-1/+1
Obj flags for shmem objects is not being set correctly. Fixes in setting BO_ALLOC_USER flag which applies to shmem objs as well. v2: Add fixes tag (Tvrtko, Matt A) Fixes: 13d29c823738 ("drm/i915/ehl: unconditionally flush the pages on acquire") Cc: <[email protected]> # v5.15+ Cc: Matthew Auld <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Aravind Iddamsetty <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Tvrtko Ursulin <[email protected]> [tursulin: Grouped all tags together.] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bca0d1d3ceeb07be45a51c0fa4d57a0ce31b6aed) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-02-06drm/i915: Move fd_install after last use of fenceRob Clark1-7/+7
Because eb_composite_fence_create() drops the fence_array reference after creation of the sync_file, only the sync_file holds a ref to the fence. But fd_install() makes that reference visable to userspace, so it must be the last thing we do with the fence. Signed-off-by: Rob Clark <[email protected]> Fixes: 00dae4d3d35d ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)") Cc: <[email protected]> # v5.15+ [tursulin: Added stable tag.] Reviewed-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 960dafa30455450d318756a9896a02727f2639e0) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-02-06drm/i915/fbdev: Implement fb_dirty for intel custom fb helperJouni Högander1-0/+12
After disconnecting damage worker from update logic it's left to fbdev emulation implementation to have fb_dirty function. Currently intel fbdev doesn't have it. This is causing problems to features (PSR, FBC, DRRS) relying on dirty callback. Implement simple fb_dirty callback to deliver notifications about updates in fb console. v4: Add proper Fixes tag and modify commit message v3: Check damage clip v2: Improved commit message and added Fixes tag Fixes: f231af498c29 ("drm/fb-helper: Disconnect damage worker from update logic") Cc: Ville Syrjälä <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Jani Nikula <[email protected]> Signed-off-by: Jouni Högander <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 1af546c2cec6e28b6bbe01a4ad0c38e96e54fcb4) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-02-06drm/i915: Don't do the WM0->WM1 copy w/a if WM1 is already enabledVille Syrjälä1-1/+2
Due to a workaround we have to make sure the WM1 watermarks block/lines values are sensible even when WM1 is disabled. To that end we copy those values from WM0. However since we now keep each wm level enabled on a per-plane basis it doesn't seem necessary to do that copy when we already have an enabled WM1 on the current plane. That is, we might be in a situation where another plane can only do WM0 (and thus needs the copy) but the current plane's WM1 is still perfectly valid (ie. fits into the current DDB allocation). Skipping the copy could avoid reprogramming the plane's registers needlessly in some cases. Fixes: a301cb0fca2d ("drm/i915: Keep plane watermarks enabled more aggressively") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> (cherry picked from commit c580c2d27ac8754cc6f01da1d715b7272f5f9cbb) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-02-06ASoC: codecs: es8326: Fix DTS properties readingAlexey Firago1-2/+4
Seems like properties parsing and reading was copy-pasted, so "everest,interrupt-src" and "everest,interrupt-clk" are saved into the es8326->jack_pol variable. This might lead to wrong settings being saved into the reg 57 (ES8326_HP_DET). Fix this by using proper variables while reading properties. Signed-off-by: Alexey Firago <[email protected]> Reviewed-by: Yang Yingliang <[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-02-06ASoC: tas5805m: add missing page switch.Daniel Beer1-0/+3
In tas5805m_refresh, we switch pages to update the DSP volume control, but we need to switch back to page 0 before trying to alter the soft-mute control. This latter page-switch was missing. Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier") Signed-off-by: Daniel Beer <[email protected]> Link: https://lore.kernel.org/r/1fea38a71ea6ab0225d19ab28d1fa12828d762d0.1675497326.git.daniel.beer@igorinstitute.com Signed-off-by: Mark Brown <[email protected]>
2023-02-06ASoC: tas5805m: rework to avoid scheduling while atomic.Daniel Beer1-41/+87
There's some setup we need to do in order to get the DSP initialized, and this can't be done until a bit-clock is ready. In an earlier version of this driver, this work was done in a DAPM callback. The DAPM callback doesn't guarantee that the bit-clock is running, so the work was moved instead to the trigger callback. Unfortunately this callback runs in atomic context, and the setup code needs to do I2C transactions. Here we use a work_struct to kick off the setup in a thread instead. Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier") Signed-off-by: Daniel Beer <[email protected]> Link: https://lore.kernel.org/r/85d8ba405cb009a7a3249b556dc8f3bdb1754fdf.1675497326.git.daniel.beer@igorinstitute.com Signed-off-by: Mark Brown <[email protected]>
2023-02-06pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data groupKrzysztof Kozlowski1-1/+1
According to hardware programming guide, the swr_rx_data pin group has only two pins (GPIO5 and GPIO6). This is also visible in "struct sm8450_groups" in the driver - GPIO15 does not have swr_rx_data function. Fixes: ec1652fc4d56 ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-02-06powerpc/kexec_file: fix implicit decl errorRandy Dunlap1-0/+1
kexec (PPC64) code calls memory_hotplug_max(). Add the header declaration for it from <asm/mmzone.h>. Using <linux/mmzone.h> does not work since the #include for <asm/mmzone.h> depends on CONFIG_NUMA=y, which is not always set. Fixes this build error/warning: arch/powerpc/kexec/file_load_64.c: In function 'kexec_extra_fdt_size_ppc64': arch/powerpc/kexec/file_load_64.c:993:33: error: implicit declaration of function 'memory_hotplug_max' 993 | usm_entries = ((memory_hotplug_max() / drmem_lmb_size()) + | ^~~~~~~~~~~~~~~~~~ Fixes: fc546faa5595 ("powerpc/kexec_file: Count hot-pluggable memory in FDT estimate") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-06RDMA/mana_ib: Prevent array underflow in mana_ib_create_qp_raw()Dan Carpenter1-1/+1
The "port" comes from the user and if it is zero then the: ndev = mc->ports[port - 1]; assignment does an out of bounds read. I have changed the if statement to fix this and to mirror how it is done in mana_ib_create_qp_rss(). Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/Y8/3Vn8qx00kE9Kk@kili Acked-by: Long Li <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2023-02-06HID: amd_sfh: if no sensors are enabled, clean upMario Limonciello2-2/+12
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") had caused increased resume time on HP Envy x360. Before this commit 3 sensors were reported, but they were not actually functional. After this commit the sensors are no longer reported, but also the resume time increased. To avoid this problem explicitly look for the number of disabled sensors. If all the sensors are disabled, clean everything up. Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115 Reported-by: Xaver Hugl <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Basavaraj Natikar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06net: USB: Fix wrong-direction WARNING in plusb.cAlan Stern1-3/+1
The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables") CC: [email protected] Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: David S. Miller <[email protected]>
2023-02-06HID: logitech: Disable hi-res scrolling on USBBastien Nocera1-1/+2
On some Logitech mice, such as the G903, and possibly the G403, the HID events are generated on a different interface to the HID++ one. If we enable hi-res through the HID++ interface, the HID interface wouldn't know anything about it, and handle the events as if they were regular scroll events, making the mouse unusable. Disable hi-res scrolling on those devices until we implement scroll events through HID++. Signed-off-by: Bastien Nocera <[email protected]> Tested-by: Tobias Klausmann <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885 Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06HID: core: Fix deadloop in hid_apply_multiplier.Xin Zhao1-0/+3
The initial value of hid->collection[].parent_idx if 0. When Report descriptor doesn't contain "HID Collection", the value remains as 0. In the meanwhile, when the Report descriptor fullfill all following conditions, it will trigger hid_apply_multiplier function call. 1. Usage page is Generic Desktop Ctrls (0x01) 2. Usage is RESOLUTION_MULTIPLIER (0x48) 3. Contain any FEATURE items The while loop in hid_apply_multiplier will search the top-most collection by searching parent_idx == -1. Because all parent_idx is 0. The loop will run forever. There is a Report Descriptor triggerring the deadloop 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) 0x09, 0x48, // Usage (0x48) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0xB1, 0x01, // Feature Signed-off-by: Xin Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06net: microchip: sparx5: fix PTP init/deinit not checking all portsCasper Andersson1-2/+2
Check all ports instead of just port_count ports. PTP init was only checking ports 0 to port_count. If the hardware ports are not mapped starting from 0 then they would be missed, e.g. if only ports 20-30 were mapped it would attempt to init ports 0-10, resulting in NULL pointers when attempting to timestamp. Now it will init all mapped ports. Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping") Signed-off-by: Casper Andersson <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06uapi: add missing ip/ipv6 header dependencies for linux/stddef.hHerton R. Krzesinski2-0/+2
Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6 header addresses"), ip and ipv6 headers started to use the __struct_group definition, which is defined at include/uapi/linux/stddef.h. However, linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h, which breaks build of xskxceiver bpf selftest if you install the uapi headers in the system: $ make V=1 xskxceiver -C tools/testing/selftests/bpf ... make: Entering directory '(...)/tools/testing/selftests/bpf' gcc -g -O0 -rdynamic -Wall -Werror (...) In file included from xskxceiver.c:79: /usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’ 103 | __struct_group(/* no tag */, addrs, /* no attrs */, | ^~~~~~~~~~~~~~ ... Include the missing <linux/stddef.h> dependency in ip.h and do the same for the ipv6.h header. Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses") Signed-off-by: Herton R. Krzesinski <[email protected]> Reviewed-by: Carlos O'Donell <[email protected]> Tested-by: Carlos O'Donell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06neigh: make sure used and confirmed times are validJulian Anastasov1-3/+15
Entries can linger in cache without timer for days, thanks to the gc_thresh1 limit. As result, without traffic, the confirmed time can be outdated and to appear to be in the future. Later, on traffic, NUD_STALE entries can switch to NUD_DELAY and start the timer which can see the invalid confirmed time and wrongly switch to NUD_REACHABLE state instead of NUD_PROBE. As result, timer is set many days in the future. This is more visible on 32-bit platforms, with higher HZ value. Why this is a problem? While we expect unused entries to expire, such entries stay in REACHABLE state for too long, locked in cache. They are not expired normally, only when cache is full. Problem and the wrong state change reported by Zhang Changzhong: 172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE 350520 seconds have elapsed since this entry was last updated, but it is still in the REACHABLE state (base_reachable_time_ms is 30000), preventing lladdr from being updated through probe. Fix it by ensuring timer is started with valid used/confirmed times. Considering the valid time range is LONG_MAX jiffies, we try not to go too much in the past while we are in DELAY/PROBE state. There are also places that need used/updated times to be validated while timer is not running. Reported-by: Zhang Changzhong <[email protected]> Signed-off-by: Julian Anastasov <[email protected]> Tested-by: Zhang Changzhong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9Elvis Angelaccio1-0/+1
The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref fixup in order to enable mute/micmute LEDs. Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook 640 G9, does not work with the 645 G9. [ rearranged the entry in SSID order -- tiwai ] Signed-off-by: Elvis Angelaccio <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-06cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systemsDouglas Anderson1-11/+13
On a sc7180-based Chromebook, when I go to /sys/devices/system/cpu/cpu0/cpufreq I can see: cpuinfo_cur_freq:2995200 cpuinfo_max_freq:1804800 scaling_available_frequencies:300000 576000 ... 1708800 1804800 scaling_cur_freq:1804800 scaling_max_freq:1804800 As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this bogus info started showing up as of commit c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That commit seems to assume that everyone is on the LMH bandwagon, but sc7180 isn't. Let's go back to the old code in the case where LMH isn't used. Fixes: c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()") Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> [ Viresh: Fixed the 'fixes' tag ] Signed-off-by: Viresh Kumar <[email protected]>
2023-02-05Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-24/+24
Pull ELF fix from Al Viro: "One of the many equivalent build warning fixes for !CONFIG_ELF_CORE configs. Geert's is the earliest one I've been able to find" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump: Move dump_emit_page() to kill unused warning
2023-02-05Linux 6.2-rc7Linus Torvalds1-1/+1
2023-02-05Merge tag 'usb-6.2-rc7' of ↵Linus Torvalds21-19/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve some reported problems. These include: - gadget driver fixes - dwc3 driver fix - typec driver fix - MAINTAINERS file update. All of these have been in linux-next with no reported problems" * tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Don't attempt to resume the ports before they exist usb: gadget: udc: do not clear gadget driver.bus usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait usb: dwc3: qcom: enable vbus override when in OTG dr-mode MAINTAINERS: Add myself as UVC Gadget Maintainer
2023-02-05Merge tag 'tty-6.2-rc7' of ↵Linus Torvalds3-36/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serial and vt fixes. These include: - 8250 driver fixes relating to dma issues - stm32 serial driver fix for threaded irqs - vc_screen bugfix for reported problems. All have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF serial: 8250_dma: Fix DMA Rx rearm race serial: 8250_dma: Fix DMA Rx completion race serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
2023-02-05Merge tag 'char-misc-6.2-rc7' of ↵Linus Torvalds19-72/+207
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/whatever driver fixes. They include: - IIO driver fixes for some reported problems - nvmem driver fixes - fpga driver fixes - debugfs memory leak fix in the hv_balloon and irqdomain code (irqdomain change was acked by the maintainer) All have been in linux-next with no reported problems" * tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() nvmem: qcom-spmi-sdam: fix module autoloading nvmem: core: fix return value nvmem: core: fix cell removal on error nvmem: core: fix device node refcounting nvmem: core: fix registration vs use race nvmem: core: fix cleanup after dev_set_name() nvmem: core: remove nvmem_config wp_gpio nvmem: core: initialise nvmem->id early nvmem: sunxi_sid: Always use 32-bit MMIO reads nvmem: brcm_nvram: Add check for kzalloc iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m ...
2023-02-05Merge tag 'fbdev-for-6.2-rc7' of ↵Linus Torvalds14-75/+27
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid overflows reported by syzbot - switch omapfb to use kstrtobool() - switch some fbdev drivers to use the backlight helpers * tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbcon: Check font dimension limits fbdev: omapfb: Use kstrtobool() instead of strtobool() fbdev: fbmon: fix function name in kernel-doc fbdev: atmel_lcdfb: Rework backlight status updates fbdev: riva: Use backlight helper fbdev: omapfb: panel-dsi-cm: Use backlight helper fbdev: nvidia: Use backlight helper fbdev: mx3fb: Use backlight helper fbdev: radeon: Use backlight helper fbdev: atyfb: Use backlight helper fbdev: aty128fb: Use backlight helper
2023-02-05Merge tag 'x86_urgent_for_v6.2_rc7' of ↵Linus Torvalds1-2/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Prevent the compiler from reordering accesses to debug regs which could cause a #VC exception in SEV-ES guests at the wrong place in the NMI handling path * tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
2023-02-05Merge tag 'perf_urgent_for_v6.2_rc7' of ↵Linus Torvalds3-22/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Lock the proper critical section when dealing with perf event context * tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_pmu_context serialization
2023-02-04Merge tag 'powerpc-6.2-4' of ↵Linus Torvalds10-31/+77
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
2023-02-04Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds4-24/+33
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04Merge tag 'kbuild-fixes-v6.2-4' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
2023-02-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-98/+132
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock()
Powered by cgit, Gruvboxed by Blaster4385.