| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
An ea_inode stores the value of an extended attribute; it can not have
extended attributes itself, or this will cause recursive nightmares.
Add a check in ext4_iget() to make sure this is the case.
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
If the ea_inode has been pushed out of the inode cache while there is
still a reference in the mb_cache, the lockdep subclass will not be
set on the inode, which can lead to some lockdep false positives.
Fixes: 33d201e0277b ("ext4: fix lockdep warning about recursive inode locking")
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The driver core never calls a remove callback with the platform_device
pointer being NULL. So the check for this condition can just be dropped.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Frank reported boot regression in ia64 as:
ELILO v3.16 for EFI/IA-64
..
Uncompressing Linux... done
Loading file AC100221.initrd.img...done
[ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc
(GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20
CEST 2023
[ 0.000000] efi: EFI v1.1 by HP
[ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000
ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000
[ 0.000000] PCDP: v3 at 0x3fe28000
[ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options
'9600n8')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP )
[ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620
00000000 HP 00000000)
[...]
[ 3.793350] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 252.6-1
[ 3.951100] ------------[ cut here ]------------
[ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547
__layout_sections+0x370/0x3c0
[ 3.949512] Unable to handle kernel paging request at virtual address
1000000000000000
[ 3.951100] Modules linked in:
[ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1
[ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1]
[ 3.951774] Hardware name: hp server rx2620 , BIOS
04.29
11/30/2007
[ 3.951774]
[ 3.951774] Call Trace:
[ 3.958339] Unable to handle kernel paging request at virtual address
1000000000000000
[ 3.956161] Modules linked in:
[ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60
[ 3.951774] sp=e000000183a67b20
bsp=e000000183a61628
[ 3.956161]
[ 3.956161]
which bisect to module_memory change [1].
Debug showed that ia64 uses some special sections:
__layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID
__layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID
__layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID
All these sections are loaded to module core memory before [1].
Fix ia64 boot by loading these sections to MOD_DATA (core rw data).
[1] commit ac3b43283923 ("module: replace module_layout with module_memory")
Fixes: ac3b43283923 ("module: replace module_layout with module_memory")
Reported-by: Frank Scheiner <[email protected]>
Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html
Closes: https://marc.info/?l=linux-ia64&m=168509859125505
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
When a command completes, we set a flag which will skip sending a
keep alive at the next run of nvme_keep_alive_work when TBKAS is on.
However, if the command was submitted long ago, it's possible that
the controller may have also restarted its keep alive timer (as a
result of receiving the command) long ago. The following trace
demonstrates the issue, assuming TBKAS is on and KATO = 8 for
simplicity:
1. t = 0: submit I/O commands A, B, C, D, E
2. t = 0.5: commands A, B, C, D, E reach controller, restart its keep
alive timer
3. t = 1: A completes
4. t = 2: run nvme_keep_alive_work, see recent completion, do nothing
5. t = 3: B completes
6. t = 4: run nvme_keep_alive_work, see recent completion, do nothing
7. t = 5: C completes
8. t = 6: run nvme_keep_alive_work, see recent completion, do nothing
9. t = 7: D completes
10. t = 8: run nvme_keep_alive_work, see recent completion, do nothing
11. t = 9: E completes
At this point, 8.5 seconds have passed without restarting the
controller's keep alive timer, so the controller will detect a keep
alive timeout.
Fix this by checking the IO start time when deciding to defer sending a
keep alive command. Only set comp_seen if the command started after the
most recent run of nvme_keep_alive_work. With this change, the
completions of B, C, and D will not set comp_seen and the run of
nvme_keep_alive_work at t = 4 will send a keep alive.
Reported-by: Costa Sapuntzakis <[email protected]>
Reported-by: Randy Jennings <[email protected]>
Signed-off-by: Uday Shankar <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
With TBKAS on, the completion of one command can defer sending a
keep alive for up to twice the delay between successive runs of
nvme_keep_alive_work. The current delay of KATO / 2 thus makes it
possible for one command to defer sending a keep alive for up to
KATO, which can result in the controller detecting a KATO. The following
trace demonstrates the issue, taking KATO = 8 for simplicity:
1. t = 0: run nvme_keep_alive_work, no keep-alive sent
2. t = ε: I/O completion seen, set comp_seen = true
3. t = 4: run nvme_keep_alive_work, see comp_seen == true,
skip sending keep-alive, set comp_seen = false
4. t = 8: run nvme_keep_alive_work, see comp_seen == false,
send a keep-alive command.
Here, there is a delay of 8 - ε between receiving a command completion
and sending the next command. With ε small, the controller is likely to
detect a keep alive timeout.
Fix this by running nvme_keep_alive_work with a delay of KATO / 4
whenever TBKAS is on. Going through the above trace now gives us a
worst-case delay of 4 - ε, which is in line with the recommendation of
sending a command every KATO / 2 in the NVMe specification.
Reported-by: Costa Sapuntzakis <[email protected]>
Reported-by: Randy Jennings <[email protected]>
Signed-off-by: Uday Shankar <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
In the function nvme_passthru_end(), only the value of the command
opcode is checked, without checking the command type (IO command or
Admin command). When we send a Dataset Management command (The opcode
of the Dataset Management command is the same as the Set Feature
command), kernel thinks it is a set feature command, then sets the
controller's keep alive interval, and calls nvme_keep_alive_work().
Signed-off-by: min15.li <[email protected]>
Reviewed-by: Kanchan Joshi <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: skip tests not supported by old kernels (part 1)
After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.
Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace. In addition, the current selftests
run a lot of different sub-tests but the TAP13 protocol used in the
selftests don't support sub-tests: in other words, one failure in
sub-tests implies that the whole selftest is seen as failed at the end
because sub-tests are not tracked. It is then important to skip
sub-tests not supported by old kernels.
To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftests or just some sub-tests before starting them.
This first part focuses on marking the different selftests as skipped
if MPTCP is not even supported. That's what is done in patches 2 to 8.
Patch 2/8 introduces a new file (mptcp_lib.sh) to be able to re-use some
helpers in the different selftests. The first MPTCP selftest has been
introduced in v5.6.
Patch 1/8 is a bit different but still linked: it modifies mptcp_join.sh
selftest not to use 'cmp --bytes' which is not supported by the BusyBox
implementation. It is apparently quite common to use BusyBox in CI
environments. This tool is needed for a subtest introduced in v6.1.
Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================
Link: https://lore.kernel.org/r/20230528-upstream-net-20230528-mptcp-selftests-support-old-kernels-part-1-v1-0-a32d85577fc6@tessares.net
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc685321b ("selftests: add PM netlink functional tests")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped". Note that this check can also
mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env
var is set to 1: by doing that, we can make sure a test is not being
skipped by mistake.
A new shared file is added here to be able to re-used the same check in
the different selftests we have.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
BusyBox's 'cmp' command doesn't support the '--bytes' parameter.
Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test
failing [1] because their 'cmp' command doesn't support this '--bytes'
option:
cmp: unrecognized option '--bytes=1024'
BusyBox v1.35.0 () multi-call binary.
Usage: cmp [-ls] [-n NUM] FILE1 [FILE2]
Instead, 'head --bytes' can be used as this option is supported by
BusyBox. A temporary file is needed for this operation.
Because it is apparently quite common to use BusyBox, it is certainly
better to backport this fix to impacted kernels.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: [email protected]
Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1]
Suggested-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the
frequent and parallel code path of all queues. So, r/w into this
single shared variable by many threads on different CPUs creates a
lot caching and memory overhead, hence perf regression. And, it's
not accurate due to the high volume concurrent r/w.
For example, a workload is iperf with 128 threads, and with RPS
enabled. We saw perf regression of 25% with the previous patch
adding the counters. And this patch eliminates the regression.
Since the error path of mana_poll_rx_cq() already has warnings, so
keeping the counter and convert it to a per-queue variable is not
necessary. So, just remove this counter from this high frequency
code path.
Also, remove the tx_cqes counter for the same reason. We have
warnings & other counters for errors on that path, and don't need
to count every normal cqe processing.
Cc: [email protected]
Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Wen Gu says:
====================
Two fixes for SMCRv2
This patch set includes two bugfix for SMCRv2.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We encountered a crash when using SMCRv2. It is caused by a logical
error in smc_llc_fill_ext_v2().
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #44
Workqueue: events smc_llc_add_link_work [smc]
RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc]
RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282
RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a
RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c
R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250
FS: 0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
smc_llc_send_add_link+0x1ae/0x2f0 [smc]
smc_llc_srv_add_link+0x2c9/0x5a0 [smc]
? cc_mkenc+0x40/0x60
smc_llc_add_link_work+0xb8/0x140 [smc]
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
When an alernate RNIC is available in system, SMC will try to add a new
link based on the RNIC for resilience. All the RMBs in use will be mapped
to the new link. Then the RMBs' MRs corresponding to the new link will be
filled into SMCRv2 LLC ADD LINK messages.
However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which
haven't been mapped to the new link and have no valid MRs, thus causing
a crash. So this patch fixes the logic.
Fixes: b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")
Signed-off-by: Wen Gu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When finding the first RMB of link group, it should start from the
current RMB list whose index is 0. So fix it.
Fixes: b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")
Signed-off-by: Wen Gu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
UTS_RELEASE has a maximum length of 64 which can cause rxrpc_version to
exceed the 65 byte message limit.
Per the rx spec[1]: "If a server receives a packet with a type value of 13,
and the client-initiated flag set, it should respond with a 65-byte payload
containing a string that identifies the version of AFS software it is
running."
The current implementation causes a compile error when WERROR is turned on
and/or UTS_RELEASE exceeds the length of 49 (making the version string more
than 64 characters).
Fix this by generating the string during module initialisation and limiting
the UTS_RELEASE segment of the string does not exceed 49 chars. We need to
make sure that the 64 bytes includes "linux-" at the front and " AF_RXRPC"
at the back as this may be used in pattern matching.
Fixes: 44ba06987c0b ("RxRPC: Handle VERSION Rx protocol packets")
Reported-by: Kenny Ho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: David Howells <[email protected]>
Acked-by: Kenny Ho <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Andrew Lunn <[email protected]>
cc: David Laight <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://web.mit.edu/kolya/afs/rx/rx-spec [1]
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jeffrey Altman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This patch replaces the tp->mss_cache check in getting TCP_MAXSEG
with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since
tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if
it's zero is probably a bug.
With this change, getting TCP_MAXSEG before connecting will return
default MSS normally, and return user_mss if user_mss is set.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jack Yang <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t
Signed-off-by: Cambda Zhu <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.
A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.
tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.
Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.
When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]
This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().
If this counter is not zero, tcp_disconnect() returns an error.
This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.
Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <[email protected]>
Reported-by: Paolo Abeni <[email protected]>
Diagnosed-by: Paolo Abeni <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Tested-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt()
This is better handled by reading pkt_sk(sk)->num later
in packet_do_bind() while appropriate lock is held.
READ_ONCE() in writers are often an evidence of something being wrong.
Fixes: 822b5a1c17df ("af_packet: Fix data-races of pkt_sk(sk)->num.")
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ethtool has some attrs which dump multiple scalars into
an attribute. The spec currently expects one attr per entry.
Fixes: a353318ebf24 ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
BM818 is based on Qualcomm MDM9607 chipset.
Fixes: 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card")
Cc: [email protected]
Signed-off-by: Sebastian Krzyszkowiak <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
For devices not attached to a port multiplier and managed directly by
libata, the device number passed to ata_find_dev() must always be lower
than the maximum number of devices returned by ata_link_max_devices().
That is 1 for SATA devices or 2 for an IDE link with master+slave
devices. This device number is the SCSI device ID which matches these
constraints as the IDs are generated per port and so never exceed the
maximum number of devices for the link being used.
However, for libsas managed devices, SCSI device IDs are assigned per
struct scsi_host, leading to device IDs for SATA devices that can be
well in excess of libata per-link maximum number of devices. This
results in ata_find_dev() to always return NULL for libsas managed
devices except for the first device of the target scsi_host with ID
(device number) equal to 0. This issue is visible by executing the
hdparm utility, which fails. E.g.:
hdparm -i /dev/sdX
/dev/sdX:
HDIO_GET_IDENTITY failed: No message of desired type
Fix this by rewriting ata_find_dev() to ignore the device number for
non-PMP attached devices with a link with at most 1 device, that is SATA
devices. For these, the device number 0 is always used to
return the correct pointer to the struct ata_device of the port link.
This change excludes IDE master/slave setups (maximum number of devices
per link is 2) and port-multiplier attached devices. Also, to be
consistant with the fact that SCSI device IDs and channel numbers used
as device numbers are both unsigned int, change the devno argument of
ata_find_dev() to unsigned int.
Reported-by: Xingui Yang <[email protected]>
Fixes: 41bda9c98035 ("libata-link: update hotplug to handle PMP links")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
|
|
If the local invalidate fence is indicated in the WR, only the read fence
is currently being set in WQE. Fix this to set both the read and local
fence in the WQE.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mustafa Ismail <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
There is a window where the poll cq may use a QP that has been freed.
This can happen if a CQE is polled before irdma_clean_cqes() can clear the
CQE's related to the QP and the destroy QP races to free the QP memory.
then the QP structures are used in irdma_poll_cq. Fix this by moving the
clearing of CQE's before the reference is removed and the QP is destroyed.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mustafa Ismail <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Change EFA driver maintainer from Gal Pressman to myself. Keep Gal as a
reviewer at his request.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Margolin <[email protected]>
Acked-by: Gal Pressman <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The scsi driver function sd_read_block_characteristics() always calls
disk_set_zoned() to a disk zoned model correctly, in case the device
model changed. This is done even for regular disks to set the zoned
model to BLK_ZONED_NONE and free any zone related resources if the drive
previously was zoned.
This behavior significantly impact the time it takes to revalidate disks
on a large system as the call to disk_clear_zone_settings() done from
disk_set_zoned() for the BLK_ZONED_NONE case results in the device
request queued to be frozen, even if there are no zone resources to
free.
Avoid this overhead for non-zoned devices by not calling
disk_clear_zone_settings() in disk_set_zoned() if the device model
was already set to BLK_ZONED_NONE, which is always the case for regular
devices.
Reported by: Brian Bunker <[email protected]>
Fixes: 508aebb80527 ("block: introduce blk_queue_clear_zone_settings()")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Hibernation support depends on firmware marking its reserved/PMP
protected regions as not accessible from Linux.
The latest versions of the de-facto SBI implementation (OpenSBI) do
not do this, having dropped the no-map property to enable 1 GiB huge
page mappings by the kernel.
This was exposed by commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages
for the linear mapping"), which made the first 2 MiB of DRAM (where SBI
typically resides) accessible by the kernel.
Attempting to hibernate with either OpenSBI, or other implementations
following its lead, will lead to a kernel panic ([1], [2]) as the
hibernation process will attempt to save/restore any mapped regions,
including the PMP protected regions in use by the SBI implementation.
Mark hibernation as depending on "NONPORTABLE", as only a small subset
of systems are capable of supporting it, until such time that an SBI
implementation independent way to communicate what regions are in use
has been agreed on.
As hibernation support landed in v6.4-rc1, disabling it for most
platforms does not constitute a regression. The alternative would have
been reverting commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for
the linear mapping").
Doing so would permit hibernation on platforms with these SBI
implementations, but would limit the options we have to solve the
protection of the region without causing a regression in hibernation
support.
Reported-by: Song Shuai <[email protected]>
Link: https://lore.kernel.org/all/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/ [1]
Reported-by: JeeHeng Sia <[email protected]>
Link: https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/ITXwaKfA6z8 [2]
Signed-off-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20230526-astride-detonator-9ae120051159@wendy
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"User events:
- Use long instead of int for storing the enable set/clear bit, as it
was found that big endian machines could end up using the wrong
bits.
- Split allocating mm and attaching it. This keeps the allocation
separate from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can
schedule. The RCU protection is no longer needed with the above
split of mm allocation and attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking
requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat
interrupt triggering when tracing is off. The timer interrupt
handler needs to always wake up the timerlat thread regardless if
tracing is enabled or not, otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables.
That modifier cannot be used for values, but can be used for
variables that are passed from one histogram to the next. This was
broken when adding the restriction to values as the variable logic
used the same code.
- Rename the special field "stacktrace" to "common_stacktrace".
Special fields (that are not actually part of the event, but can
act just like event fields, like 'comm' and 'timestamp') should be
prefixed with 'common_' for consistency. To keep backward
compatibility, 'stacktrace' can still be used (as with the special
field 'cpu'), but can be overridden if the event has a field called
'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic
events are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled
in when selftests are not configured.
- Add various cond_resched() around the selftest code, as the
softlock watchdog was triggering much more often. It appears that
the kernel runs slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer
instead of the top level one), I found that the selftests were
disabling prints to the debug instance.
This should not happen, as the selftests only disable printing to
the main buffer as the selftests examine the main buffer to see if
it has what it expects, and prints can make the tests fail.
Make the selftests only disable printing to the toplevel buffer,
and leave the instance buffers alone"
* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have function_graph selftest call cond_resched()
tracing: Only make selftest conditionals affect the global_trace
tracing: Make tracing_selftest_running/delete nops when not used
tracing: Have tracer selftests call cond_resched() before running
tracing: Move setting of tracing_selftest_running out of register_tracer()
tracing/selftests: Update synthetic event selftest to use common_stacktrace
tracing: Rename stacktrace field to common_stacktrace
tracing/histograms: Allow variables to have some modifiers
tracing/user_events: Document user_event_mm one-shot list usage
tracing/user_events: Rename link fields for clarity
tracing/user_events: Remove RCU lock while pinning pages
tracing/user_events: Split up mm alloc and attach
tracing/timerlat: Always wakeup the timerlat thread
tracing/user_events: Use long vs int for atomic bit ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/aria"
* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors
|
|
This reverts commit 9828ed3f695a138f7add89fa2a186ababceb8006.
Sadly, it does seem to cause failures to load modules. Johan Hovold reports:
"This change breaks module loading during boot on the Lenovo Thinkpad
X13s (aarch64).
Specifically it results in indefinite probe deferral of the display
and USB (ethernet) which makes it a pain to debug. Typing in the dark
to acquire some logs reveals that other modules are missing as well"
Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later. The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.
One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When all kernel debugging is enabled (lockdep, KSAN, etc), the function
graph enabling and disabling can take several seconds to complete. The
function_graph selftest enables and disables function graph tracing
several times. With full debugging enabled, the soft lockup watchdog was
triggering because the selftest was running without ever scheduling.
Add cond_resched() throughout the test to make sure it does not trigger
the soft lockup detector.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The tracing_selftest_running and tracing_selftest_disabled variables were
to keep trace_printk() and other writes from affecting the tracing
selftests, as the tracing selftests would examine the ring buffer to see
if it contained what it expected or not. trace_printk() and friends could
add to the ring buffer and cause the selftests to fail (and then disable
the tracer that was being tested). To keep that from happening, these
variables were added and would keep trace_printk() and friends from
writing to the ring buffer while the tests were going on.
But this was only the top level ring buffer (owned by the global_trace
instance). There is no reason to prevent writing into ring buffers of
other instances via the trace_array_printk() and friends. For the
functions that could be used by other instances, check if the global_trace
is the tracer instance that is being written to before deciding to not
allow the write.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
There's no reason to test the condition variables tracing_selftest_running
or tracing_selftest_delete when tracing selftests are not enabled. Make
them define 0s when not the selftests are not configured in.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
As there are more and more internal selftests being added to the Linux
kernel (KSAN, lockdep, etc) the selftests are taking longer to run when
these are enabled. Add a cond_resched() to the calling of
do_run_tracer_selftest() to force a schedule if NEED_RESCHED is set,
otherwise the soft lockup watchdog may trigger on boot up.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The variables tracing_selftest_running and tracing_selftest_disabled are
only used for when CONFIG_FTRACE_STARTUP_TEST is enabled. Make them only
visible within the selftest code. The setting of those variables are in
the register_tracer() call, and set in a location where they do not need
to be. Create a wrapper around run_tracer_selftest() called
do_run_tracer_selftest() which sets those variables, and have
register_tracer() call that instead.
Having those variables only set within the CONFIG_FTRACE_STARTUP_TEST
scope gets rid of them (and also the ability to remove testing against
them) when the startup tests are not enabled (most cases).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- init count imbalance fix in qcom-qmp-pcie and combo drivers
- kernel doc header fix for qcom-snps driver
- mediatek floating point comparison fix
- amlogic fix register value
* tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value
phy: mediatek: rework the floating point comparisons to fixed point
phy: qcom-qmp-pcie-msm8996: fix init-count imbalance
phy: qcom-qmp-combo: fix init-count imbalance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:
- AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
handling and potential NULL dereference check
- PL330 function rename to avoid conflicts
- build warning fix for pm function in TI driver
- IDXD driver fix for passing freed memory"
* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
dmaengine: pl330: rename _start to prevent build error
dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()
|
|
The macOS hypervisor framework includes a host-side VMM called
VZLinuxBootLoader [1] which implements native support for booting the
Linux kernel inside a guest directly (instead of, e.g., via GRUB
installed inside the guest). On x86, it incorporates a BIOS style loader
that does not implement or expose EFI to the loaded kernel. However,
this loader appears to fail when the 'image minor version' field in the
kernel image's PE/COFF header (which is generally only used by EFI based
bootloaders) is set to any value other than 0x0. [2]
Commit e346bebbd36b1576 ("efi: libstub: Always enable initrd command
line loader and bump version") incremented the EFI stub image minor
version to convey that all EFI stub kernels now implement support for
the initrd= command line option, and do so in a way where it can load
initrd images from any filesystem known to the EFI firmware (as opposed
to prior implementations that could only load initrds from the same
volume that the kernel image was loaded from).
Unfortunately, bumping the version to v1.1 triggers this issue in
VZLinuxBootLoader, breaking the boot on x86. So let's keep the image
minor version at 0x0, and bump the image major version instead.
While at it, convert this field to a bit field, so that individual
features are discoverable from it, as suggested by Linus. So let's bump
the major version to v3, and document the initrd= command line loading
feature as being represented by bit 1 in the mask.
Note that, due to the prior interpretation as a monotonically increasing
version field, loaders are still permitted to assume that the LoadFile2
initrd loading feature is supported for any major version value >= 1,
even if bit 0 is not set.
[1] https://developer.apple.com/documentation/virtualization/vzlinuxbootloader
[2] https://lore.kernel.org/linux-efi/CAG8fp8Teu4G9JuenQrqGndFt2Gy+V4YgJ=hN1xX7AD940YKf3A@mail.gmail.com/
Fixes: e346bebbd36b1576 ("efi: libstub: Always enable initrd command ...")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217485
Signed-off-by: Akihiro Suda <[email protected]>
[ardb: rewrite comment and commit log]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Add a new flag, EXT4_IGET_EA_INODE which indicates whether the inode
is expected to have the EA_INODE flag or not. If the flag is not
set/clear as expected, then fail the iget() operation and mark the
file system as corrupted.
This commit also makes the ext4_iget() always perform the
is_bad_inode() check even when the inode is already inode cache. This
allows us to remove the is_bad_inode() check from the callers of
ext4_iget() in the ea_inode code.
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
|