| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we want to support 32-bit applications, then when we identify a CPU
with mismatched 32-bit EL0 support we must ensure that we will always
have an active 32-bit CPU available to us from then on. This is important
for the scheduler, because is_cpu_allowed() will be constrained to 32-bit
CPUs for compat tasks and forced migration due to a hotplug event will
hang if no 32-bit CPUs are available.
On detecting a mismatch, prevent offlining of either the mismatching CPU
if it is 32-bit capable, or find the first active 32-bit capable CPU
otherwise.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When exec'ing a 32-bit task on a system with mismatched support for
32-bit EL0, try to ensure that it starts life on a CPU that can actually
run it.
Similarly, when exec'ing a 64-bit task on such a system, try to restore
the old affinity mask if it was previously restricted.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Bristot de Oliveira <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Provide an implementation of task_cpu_possible_mask() so that we can
prevent 64-bit-only cores being added to the 'cpus_mask' for compat
tasks on systems with mismatched 32-bit support at EL0,
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
|
|
In preparation for restricting the affinity of a task during execve()
on arm64, introduce a new dl_task_check_affinity() helper function to
give an indication as to whether the restricted mask is admissible for
a deadline task.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Bristot de Oliveira <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
Although userspace can carefully manage the affinity masks for such
tasks, one place where it is particularly problematic is execve()
because the CPU on which the execve() is occurring may be incompatible
with the new application image. In such a situation, it is desirable to
restrict the affinity mask of the task and ensure that the new image is
entered on a compatible CPU. From userspace's point of view, this looks
the same as if the incompatible CPUs have been hotplugged off in the
task's affinity mask. Similarly, if a subsequent execve() reverts to
a compatible image, then the old affinity is restored if it is still
valid.
In preparation for restricting the affinity mask for compat tasks on
arm64 systems without uniform support for 32-bit applications, introduce
{force,relax}_compatible_cpus_allowed_ptr(), which respectively restrict
and restore the affinity mask for a task based on the compatible CPUs.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In preparation for replaying user affinity requests using a saved mask,
split sched_setaffinity() up so that the initial task lookup and
security checks are only performed when the request is coming directly
from userspace.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In preparation for saving and restoring the user-requested CPU affinity
mask of a task, add a new cpumask_t pointer to 'struct task_struct'.
If the pointer is non-NULL, then the mask is copied across fork() and
freed on task exit.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Reject explicit requests to change the affinity mask of a task via
set_cpus_allowed_ptr() if the requested mask is not a subset of the
mask returned by task_cpu_possible_mask(). This ensures that the
'cpus_mask' for a given task cannot contain CPUs which are incapable of
executing it, except in cases where the affinity is forced.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
select_fallback_rq() only needs to recheck for an allowed CPU if the
affinity mask of the task has changed since the last check.
Return a 'bool' from cpuset_cpus_allowed_fallback() to indicate whether
the affinity mask was updated, and use this to elide the allowed check
when the mask has been left alone.
No functional change.
Suggested-by: Valentin Schneider <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
Modify guarantee_online_cpus() to take task_cpu_possible_mask() into
account when trying to find a suitable set of online CPUs for a given
task. This will avoid passing an invalid mask to set_cpus_allowed_ptr()
during ->attach() and will subsequently allow the cpuset hierarchy to be
taken into account when forcefully overriding the affinity mask for a
task which requires migration to a compatible CPU.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
If the scheduler cannot find an allowed CPU for a task,
cpuset_cpus_allowed_fallback() will widen the affinity to cpu_possible_mask
if cgroup v1 is in use.
In preparation for allowing architectures to provide their own fallback
mask, just return early if we're either using cgroup v1 or we're using
cgroup v2 with a mask that contains invalid CPUs. This will allow
select_fallback_rq() to figure out the mask by itself.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
On such a system, we must take care not to migrate a task to an
unsupported CPU when forcefully moving tasks in select_fallback_rq()
in response to a CPU hot-unplug operation.
Introduce a task_cpu_possible_mask() hook which, given a task argument,
allows an architecture to return a cpumask of CPUs that are capable of
executing that task. The default implementation returns the
cpu_possible_mask, since sane machines do not suffer from per-cpu ISA
limitations that affect scheduling. The new mask is used when selecting
the fallback runqueue as a last resort before forcing a migration to the
first active CPU.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This extends SCHED_IDLE to cgroups.
Interface: cgroup/cpu.idle.
0: default behavior
1: SCHED_IDLE
Extending SCHED_IDLE to cgroups means that we incorporate the existing
aspects of SCHED_IDLE; a SCHED_IDLE cgroup will count all of its
descendant threads towards the idle_h_nr_running count of all of its
ancestor cgroups. Thus, sched_idle_rq() will work properly.
Additionally, SCHED_IDLE cgroups are configured with minimum weight.
There are two key differences between the per-task and per-cgroup
SCHED_IDLE interface:
- The cgroup interface allows tasks within a SCHED_IDLE hierarchy to
maintain their relative weights. The entity that is "idle" is the
cgroup, not the tasks themselves.
- Since the idle entity is the cgroup, our SCHED_IDLE wakeup preemption
decision is not made by comparing the current task with the woken
task, but rather by comparing their matching sched_entity.
A typical use-case for this is a user that creates an idle and a
non-idle subtree. The non-idle subtree will dominate competition vs
the idle subtree, but the idle subtree will still be high priority vs
other users on the system. The latter is accomplished via comparing
matching sched_entity in the waken preemption path (this could also be
improved by making the sched_idle_rq() decision dependent on the
perspective of a specific task).
For now, we maintain the existing SCHED_IDLE semantics. Future patches
may make improvements that extend how we treat SCHED_IDLE entities.
The per-task_group idle field is an integer that currently only holds
either a 0 or a 1. This is explicitly typed as an integer to allow for
further extensions to this API. For example, a negative value may
indicate a highly latency-sensitive cgroup that should be preferred
for preemption/placement/etc.
Signed-off-by: Josh Don <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The scheduler currently expects NUMA node distances to be stable from
init onwards, and as a consequence builds the related data structures
once-and-for-all at init (see sched_init_numa()).
Unfortunately, on some architectures node distance is unreliable for
offline nodes and may very well change upon onlining.
Skip over offline nodes during sched_init_numa(). Track nodes that have
been onlined at least once, and trigger a build of a node's NUMA masks
when it is first onlined post-init.
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when
using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from
timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika
Moolchandani, Laurent Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui,
Radu Rendec, Srikar Dronamraju, and Stan Johnson.
* tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
powerpc/interrupt: Do not call single_step_exception() from other exceptions
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
powerpc/kprobes: Fix kprobe Oops happens in booke
powerpc/pseries: Fix update of LPAR security flavor after LPM
powerpc/smp: Fix OOPS in topology_init()
powerpc/32: Fix critical and debug interrupts on BOOKE
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a CONFIG symbol's spelling
* tag 'locking_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use the correct rtmutex debugging config option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by
the firmware image loader"
* tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm64: Double check image alignment at entry
efi/libstub: arm64: Warn when efi_random_alloc() fails
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Two fixes:
- An objdump checker fix to ignore parenthesized strings in the
objdump version
- Fix resctrl default monitoring groups reporting when new subgroups
get created"
* tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix default monitoring groups reporting
x86/tools: Fix objdump version check again
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
KVM: x86/mmu: Don't step down in the TDP iterator when zapping all SPTEs
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
kvm: vmx: Sync all matching EPTPs when injecting nested EPT fault
KVM: x86: remove dead initialization
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
KVM: arm64: Fix race when enabling KVM_ARM_CAP_MTE
KVM: arm64: Fix off-by-one in range_is_memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix incorrectly assigned error return and check
scsi: storvsc: Log TEST_UNIT_READY errors as warnings
scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"A single revert of a commit that caused problems in 5.14-rc5 for
5.14-rc6. It has been in linux-next almost all week, and has resolved
the issues that were reported on lots of different systems that were
not the platform that the change was originally tested on (gotta love
SoC cores used in multiple devices from multiple vendors...)"
* tag 'usb-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: gadget: Use list_replace_init() before traversing lists"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for reported problems for
5.14-rc6 (no staging driver fixes at the moment).
All of them resolve reported issues and have been in linux-next all
week with no reported problems. Full details are in the shortlog"
* tag 'staging-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Fix incorrect exit of for-loop
iio: humidity: hdc100x: Add margin to the conversion time
dt-bindings: iio: st: Remove wrong items length check
iio: accel: fxls8962af: fix i2c dependency
iio: adis: set GPIO reset pin direction
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
iio: accel: fxls8962af: fix potential use of uninitialized symbol
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"One driver bugfix, a documentation bugfix, and an "uninitialized data"
leak fix for the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: i2c: add i2c-sysfs into index
i2c: dev: zero out array used for i2c reads from userspace
i2c: iproc: fix race between client unreg and tasklet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A small cleanup patch and a fix of a rare race in the Xen evtchn
driver"
* tag 'for-linus-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix race in set_evtchn_to_irq
xen/events: remove redundant initialization of variable irq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid passing -mno-relax to compilers that don't support it
- a comment fix
* tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix comment regarding kernel mapping overlapping with IS_ERR_VALUE
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
|
|
Pull configfs fix from Christoph Hellwig:
- fix to revert to the historic write behavior (Bart Van Assche)
* tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs:
configfs: restore the kernel v5.13 text attribute write behavior
|
|
Merge misc fixes from Andrew Morton:
"7 patches.
Subsystems affected by this patch series: mm (kasan, mm/slub,
mm/madvise, and memcg), and lib"
* emailed patches from Andrew Morton <[email protected]>:
lib: use PFN_PHYS() in devmem_is_allowed()
mm/memcg: fix incorrect flushing of lruvec data in obj_stock
mm/madvise: report SIGBUS as -EFAULT for MADV_POPULATE_(READ|WRITE)
mm: slub: fix slub_debug disabling for list of slabs
slub: fix kmalloc_pagealloc_invalid_free unit test
kasan, slub: reset tag when printing address
kasan, kmemleak: reset tags when scanning block
|
|
Pull cifs fixes from Steve French:
"Four CIFS/SMB3 Fixes, all for stable, two relating to deferred close,
and one for the 'modefromsid' mount option (when 'idsfromsid' not
specified)"
* tag '5.14-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Call close synchronously during unlink/rename/lease break.
cifs: Handle race conditions during rename
cifs: use the correct max-length for dentry_path_raw()
cifs: create sd context must be a multiple of 8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A single patch to sgx test to fix Q1 and Q2 calculation"
* tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
|
|
The physical address may exceed 32 bits on 32-bit systems with more than
32 bits of physcial address. Use PFN_PHYS() in devmem_is_allowed(), or
the physical address may overflow and be truncated.
We found this bug when mapping a high addresses through devmem tool,
when CONFIG_STRICT_DEVMEM is enabled on the ARM with ARM_LPAE and devmem
is used to map a high address that is not in the iomem address range, an
unexpected error indicating no permission is returned.
This bug was initially introduced from v2.6.37, and the function was
moved to lib in v5.11.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 087aaffcdf9c ("ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem")
Fixes: 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
Signed-off-by: Liang Wang <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Russell King <[email protected]>
Cc: Liang Wang <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: <[email protected]> [2.6.37+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When mod_objcg_state() is called with a pgdat that is different from
that in the obj_stock, the old lruvec data cached in obj_stock are
flushed out. Unfortunately, they were flushed to the new pgdat and so
the data go to the wrong node. This will screw up the slab data
reported in /sys/devices/system/node/node*/meminfo.
Fix that by flushing the data to the cached pgdat instead.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 68ac5b3c8db2 ("mm/memcg: cache vmstat data in percpu memcg_stock_pcp")
Signed-off-by: Waiman Long <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Alex Shi <[email protected]>
Cc: Chris Down <[email protected]>
Cc: Yafang Shao <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Masayoshi Mizuma <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Waiman Long <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Doing some extended tests and polishing the man page update for
MADV_POPULATE_(READ|WRITE), I realized that we end up converting also
SIGBUS (via -EFAULT) to -EINVAL, making it look like yet another
madvise() user error.
We want to report only problematic mappings and permission problems that
the user could have know as -EINVAL.
Let's not convert -EFAULT arising due to SIGBUS (or SIGSEGV) to -EINVAL,
but instead indicate -EFAULT to user space. While we could also convert
it to -ENOMEM, using -EFAULT looks more helpful when user space might
want to troubleshoot what's going wrong: MADV_POPULATE_(READ|WRITE) is
not part of an final Linux release and we can still adjust the behavior.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rolf Eike Beer <[email protected]>
Cc: Ram Pai <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Vijayanand Jitta reports:
Consider the scenario where CONFIG_SLUB_DEBUG_ON is set and we would
want to disable slub_debug for few slabs. Using boot parameter with
slub_debug=-,slab_name syntax doesn't work as expected i.e; only
disabling debugging for the specified list of slabs. Instead it
disables debugging for all slabs, which is wrong.
This patch fixes it by delaying the moment when the global slub_debug
flags variable is updated. In case a "slub_debug=-,slab_name" has been
passed, the global flags remain as initialized (depending on
CONFIG_SLUB_DEBUG_ON enabled or disabled) and are not simply reset to 0.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vlastimil Babka <[email protected]>
Reported-by: Vijayanand Jitta <[email protected]>
Reviewed-by: Vijayanand Jitta <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vinayak Menon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The unit test kmalloc_pagealloc_invalid_free makes sure that for the
higher order slub allocation which goes to page allocator, the free is
called with the correct address i.e. the virtual address of the head
page.
Commit f227f0faf63b ("slub: fix unreclaimable slab stat for bulk free")
unified the free code paths for page allocator based slub allocations
but instead of using the address passed by the caller, it extracted the
address from the page. Thus making the unit test
kmalloc_pagealloc_invalid_free moot. So, fix this by using the address
passed by the caller.
Should we fix this? I think yes because dev expect kasan to catch these
type of programming bugs.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f227f0faf63b ("slub: fix unreclaimable slab stat for bulk free")
Signed-off-by: Shakeel Butt <[email protected]>
Reported-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The address still includes the tags when it is printed. With hardware
tag-based kasan enabled, we will get a false positive KASAN issue when
we access metadata.
Reset the tag before we access the metadata.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Kuan-Ying Lee <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: Nicholas Tang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "kasan, slub: reset tag when printing address", v3.
With hardware tag-based kasan enabled, we reset the tag when we access
metadata to avoid from false alarm.
This patch (of 2):
Kmemleak needs to scan kernel memory to check memory leak. With hardware
tag-based kasan enabled, when it scans on the invalid slab and
dereference, the issue will occur as below.
Hardware tag-based KASAN doesn't use compiler instrumentation, we can not
use kasan_disable_current() to ignore tag check.
Based on the below report, there are 11 0xf7 granules, which amounts to
176 bytes, and the object is allocated from the kmalloc-256 cache. So
when kmemleak accesses the last 256-176 bytes, it causes faults, as those
are marked with KASAN_KMALLOC_REDZONE == KASAN_TAG_INVALID == 0xfe.
Thus, we reset tags before accessing metadata to avoid from false positives.
BUG: KASAN: out-of-bounds in scan_block+0x58/0x170
Read at addr f7ff0000c0074eb0 by task kmemleak/138
Pointer tag: [f7], memory tag: [fe]
CPU: 7 PID: 138 Comm: kmemleak Not tainted 5.14.0-rc2-00001-g8cae8cd89f05-dirty #134
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
print_address_description+0x7c/0x2b4
kasan_report+0x138/0x38c
__do_kernel_fault+0x190/0x1c4
do_tag_check_fault+0x78/0x90
do_mem_abort+0x44/0xb4
el1_abort+0x40/0x60
el1h_64_sync_handler+0xb4/0xd0
el1h_64_sync+0x78/0x7c
scan_block+0x58/0x170
scan_gray_list+0xdc/0x1a0
kmemleak_scan+0x2ac/0x560
kmemleak_scan_thread+0xb0/0xe0
kthread+0x154/0x160
ret_from_fork+0x10/0x18
Allocated by task 0:
kasan_save_stack+0x2c/0x60
__kasan_kmalloc+0xec/0x104
__kmalloc+0x224/0x3c4
__register_sysctl_paths+0x200/0x290
register_sysctl_table+0x2c/0x40
sysctl_init+0x20/0x34
proc_sys_init+0x3c/0x48
proc_root_init+0x80/0x9c
start_kernel+0x648/0x6a4
__primary_switched+0xc0/0xc8
Freed by task 0:
kasan_save_stack+0x2c/0x60
kasan_set_track+0x2c/0x40
kasan_set_free_info+0x44/0x54
____kasan_slab_free.constprop.0+0x150/0x1b0
__kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0xa4/0x1fc
kfree+0x1e8/0x30c
put_fs_context+0x124/0x220
vfs_kern_mount.part.0+0x60/0xd4
kern_mount+0x24/0x4c
bdev_cache_init+0x70/0x9c
vfs_caches_init+0xdc/0xf4
start_kernel+0x638/0x6a4
__primary_switched+0xc0/0xc8
The buggy address belongs to the object at ffff0000c0074e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff0000c0074e00, ffff0000c0074f00)
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x100074
head:(____ptrval____) order:2 compound_mapcount:0 compound_pincount:0
flags: 0xbfffc0000010200(slab|head|node=0|zone=2|lastcpupid=0xffff|kasantag=0x0)
raw: 0bfffc0000010200 0000000000000000 dead000000000122 f5ff0000c0002300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0000c0074c00: f0 f0 f0 f0 f0 f0 f0 f0 f0 fe fe fe fe fe fe fe
ffff0000c0074d00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
>ffff0000c0074e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 fe fe fe fe fe
^
ffff0000c0074f00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff0000c0075000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
kmemleak: 181 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Ying Lee <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Nicholas Tang <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Chinwen Chang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull block fixes from Jens Axboe:
"A few fixes for block that should go into 5.14:
- Revert the mq-deadline cgroup addition. More work is needed on this
front, let's revert it for now and get it right before having it in
a released kernel (Tejun)
- blk-iocost lockdep fix (Ming)
- nbd double completion fix (Xie)
- Fix for non-idling when clearing the shared tag flag (Yu)"
* tag 'block-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
nbd: Aovid double completion of a request
blk-mq: clear active_queues before clearing BLK_MQ_F_TAG_QUEUE_SHARED
Revert "block/mq-deadline: Add cgroup support"
blk-iocost: fix lockdep warning on blkcg->lock
|
|
Pull io_uring fixes from Jens Axboe:
"A bit bigger than the previous weeks, but mostly just a few stable
bound fixes. In detail:
- Followup fixes to patches from last week for io-wq, turns out they
weren't complete (Hao)
- Two lockdep reported fixes out of the RT camp (me)
- Sync the io_uring-cp example with liburing, as a few bug fixes
never made it to the kernel carried version (me)
- SQPOLL related TIF_NOTIFY_SIGNAL fix (Nadav)
- Use WRITE_ONCE() when writing sq flags (Nadav)
- io_rsrc_put_work() deadlock fix (Pavel)"
* tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
tools/io_uring/io_uring-cp: sync with liburing example
io_uring: fix ctx-exit io_rsrc_put_work() deadlock
io_uring: drop ctx->uring_lock before flushing work item
io-wq: fix IO_WORKER_F_FIXED issue in create_io_worker()
io-wq: fix bug of creating io-wokers unconditionally
io_uring: rsrc ref lock needs to be IRQ safe
io_uring: Use WRITE_ONCE() when writing to sq_flags
io_uring: clear TIF_NOTIFY_SIGNAL when running task work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"An assortment of pin control fixes of varying importance, the most
important ones affecting Intel and AMD laptops turned up the recent
few days so it's time to push this to your tree.
- Fix the Kconfig dependency for Qualcomm SM8350 pin controller
- Fix pin biasing fallback behaviour on the Mediatek pin controller
- Fix the GPIO numbering scheme for Intel Tiger Lake-H to correspond
to the products that are now actually out on the market
- Fix a pin control function itemization in the Sunxi driver
out-of-bounds access bug
- Fix disable clocking for the RISC-V K210 pin controller on the
errorpath
- Fix a system shutdown bug affecting AMD Ryzen-based laptops, the
system would not suspend but just bounce back up"
* tag 'pinctrl-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Fix an issue with shutdown when system set to s0ix
pinctrl: k210: Fix k210_fpioa_probe()
pinctrl: sunxi: Don't underestimate number of functions
pinctrl: tigerlake: Fix GPIO mapping for newer version of software
pinctrl: mediatek: Fix fallback behavior for bias_set_combo
pinctrl: qcom: fix GPIOLIB dependencies
|
|
There is a race between iterating over requests in
nbd_clear_que() and completing requests in recv_work(),
which can lead to double completion of a request.
To fix it, flush the recv worker before iterating over
the requests and don't abort the completed request
while iterating.
Fixes: 96d97e17828f ("nbd: clear_sock on netlink disconnect")
Reported-by: Jiang Yadong <[email protected]>
Signed-off-by: Xie Yongji <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
This example is missing a few fixes that are in the liburing version,
synchronize with the upstream version.
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We run a test that delete and recover devcies frequently(two devices on
the same host), and we found that 'active_queues' is super big after a
period of time.
If device a and device b share a tag set, and a is deleted, then
blk_mq_exit_queue() will clear BLK_MQ_F_TAG_QUEUE_SHARED because there
is only one queue that are using the tag set. However, if b is still
active, the active_queues of b might never be cleared even if b is
deleted.
Thus clear active_queues before BLK_MQ_F_TAG_QUEUE_SHARED is cleared.
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fixes: 77e89afc25f3 ("PCI/MSI: Protect msi_desc::masked for multi-MSI")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Merge topic branch with fixes for both 5.14-rc6 and 5.15.
|
|
Add yet another spinlock for the TDP MMU and take it when marking indirect
shadow pages unsync. When using the TDP MMU and L1 is running L2(s) with
nested TDP, KVM may encounter shadow pages for the TDP entries managed by
L1 (controlling L2) when handling a TDP MMU page fault. The unsync logic
is not thread safe, e.g. the kvm_mmu_page fields are not atomic, and
misbehaves when a shadow page is marked unsync via a TDP MMU page fault,
which runs with mmu_lock held for read, not write.
Lack of a critical section manifests most visibly as an underflow of
unsync_children in clear_unsync_child_bit() due to unsync_children being
corrupted when multiple CPUs write it without a critical section and
without atomic operations. But underflow is the best case scenario. The
worst case scenario is that unsync_children prematurely hits '0' and
leads to guest memory corruption due to KVM neglecting to properly sync
shadow pages.
Use an entirely new spinlock even though piggybacking tdp_mmu_pages_lock
would functionally be ok. Usurping the lock could degrade performance when
building upper level page tables on different vCPUs, especially since the
unsync flow could hold the lock for a comparatively long time depending on
the number of indirect shadow pages and the depth of the paging tree.
For simplicity, take the lock for all MMUs, even though KVM could fairly
easily know that mmu_lock is held for write. If mmu_lock is held for
write, there cannot be contention for the inner spinlock, and marking
shadow pages unsync across multiple vCPUs will be slow enough that
bouncing the kvm_arch cacheline should be in the noise.
Note, even though L2 could theoretically be given access to its own EPT
entries, a nested MMU must hold mmu_lock for write and thus cannot race
against a TDP MMU page fault. I.e. the additional spinlock only _needs_ to
be taken by the TDP MMU, as opposed to being taken by any MMU for a VM
that is running with the TDP MMU enabled. Holding mmu_lock for read also
prevents the indirect shadow page from being freed. But as above, keep
it simple and always take the lock.
Alternative #1, the TDP MMU could simply pass "false" for can_unsync and
effectively disable unsync behavior for nested TDP. Write protecting leaf
shadow pages is unlikely to noticeably impact traditional L1 VMMs, as such
VMMs typically don't modify TDP entries, but the same may not hold true for
non-standard use cases and/or VMMs that are migrating physical pages (from
L1's perspective).
Alternative #2, the unsync logic could be made thread safe. In theory,
simply converting all relevant kvm_mmu_page fields to atomics and using
atomic bitops for the bitmap would suffice. However, (a) an in-depth audit
would be required, (b) the code churn would be substantial, and (c) legacy
shadow paging would incur additional atomic operations in performance
sensitive paths for no benefit (to legacy shadow paging).
Fixes: a2855afc7ee8 ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Set the min_level for the TDP iterator at the root level when zapping all
SPTEs to optimize the iterator's try_step_down(). Zapping a non-leaf
SPTE will recursively zap all its children, thus there is no need for the
iterator to attempt to step down. This avoids rereading the top-level
SPTEs after they are zapped by causing try_step_down() to short-circuit.
In most cases, optimizing try_step_down() will be in the noise as the cost
of zapping SPTEs completely dominates the overall time. The optimization
is however helpful if the zap occurs with relatively few SPTEs, e.g. if KVM
is zapping in response to multiple memslot updates when userspace is adding
and removing read-only memslots for option ROMs. In that case, the task
doing the zapping likely isn't a vCPU thread, but it still holds mmu_lock
for read and thus can be a noisy neighbor of sorts.
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|