aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-11pinctrl: k210: Fix k210_fpioa_probe()Damien Le Moal1-6/+20
In k210_fpioa_probe(), add missing calls to clk_disable_unprepare() in case of error after cenabling the clk and pclk clocks. Also add missing error handling when enabling pclk. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Cc: <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2021-08-11Merge tag 'mediatek-drm-fixes-5.14' of ↵Dave Airlie3-30/+39
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.14 1. Fix dpi bridge bug. 2. Fix cursor plane no update. Signed-off-by: Dave Airlie <[email protected]> From: Chun-Kuang Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-08-10Merge tag 'arc-5.14-rc6' of ↵Linus Torvalds7-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix FPU_STATUS update - Update my email address - Other spellos and fixes * tag 'arc-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: MAINTAINERS: update Vineet's email address ARC: fp: set FPU_STATUS.FWE to enable FPU_STATUS update on context switch ARC: Fix CONFIG_STACKDEPOT arc: Fix spelling mistake and grammar in Kconfig arc: Prefer unsigned int to bare use of unsigned
2021-08-10Documentation: i2c: add i2c-sysfs into indexHu Haowen1-0/+1
Append i2c-sysfs to toctree in order to get rid of building warnings. Fixes: 31df7195b100 ("Documentation: i2c: Add doc for I2C sysfs") Signed-off-by: Hu Haowen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-08-10i2c: dev: zero out array used for i2c reads from userspaceGreg Kroah-Hartman1-2/+3
If an i2c driver happens to not provide the full amount of data that a user asks for, it is possible that some uninitialized data could be sent to userspace. While all in-kernel drivers look to be safe, just be sure by initializing the buffer to zero before it is passed to the i2c driver so that any future drivers will not have this issue. Also properly copy the amount of data recvieved to the userspace buffer, as pointed out by Dan Carpenter. Reported-by: Eric Dumazet <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-08-10i2c: iproc: fix race between client unreg and taskletDhananjay Phadke1-2/+2
Similar NULL deref was originally fixed by graceful teardown sequence - https://lore.kernel.org/linux-i2c/[email protected] After this, a tasklet was added to take care of FIFO full condition for large i2c transaction. https://lore.kernel.org/linux-arm-kernel/[email protected]/ This introduced regression, a new race condition between tasklet enabling interrupts and client unreg teardown sequence. Kill tasklet before unreg_slave() masks bits in IE_OFFSET. Updated teardown sequence - (1) disable_irq() (2) Kill tasklet (3) Mask event enable bits in control reg (4) Erase slave address (avoid further writes to rx fifo) (5) Flush tx and rx FIFOs (6) Clear pending event (interrupt) bits in status reg (7) Set client pointer to NULL (8) enable_irq() -- Unable to handle kernel read from unreadable memory at virtual address 0000000000000320 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000009212a000 [0000000000000320] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O Hardware name: Overlake (DT) pstate: 40400085 (nZcv daIf +PAN -UAO -TCO BTYPE=--) pc : bcm_iproc_i2c_slave_isr+0x2b8/0x8e4 lr : bcm_iproc_i2c_slave_isr+0x1c8/0x8e4 sp : ffff800010003e70 x29: ffff800010003e80 x28: ffffda017acdc000 x27: ffffda017b0ae000 x26: ffff800010004000 x25: ffff800010000000 x24: ffffda017af4a168 x23: 0000000000000073 x22: 0000000000000000 x21: 0000000001400000 x20: 0000000001000000 x19: ffff06f09583f880 x18: 00000000fa83b2da x17: 000000000000b67e x16: 0000000002edb2f3 x15: 00000000000002c7 x14: 00000000000002c7 x13: 0000000000000006 x12: 0000000000000033 x11: 0000000000000000 x10: 0000000001000000 x9 : 0000000003289312 x8 : 0000000003289311 x7 : 02d0cd03a303adbc x6 : 02d18e7f0a4dfc6c x5 : 02edb2f33f76ea68 x4 : 00000000fa83b2da x3 : ffffda017af43cd0 x2 : ffff800010003e74 x1 : 0000000001400000 x0 : 0000000000000000 Call trace: bcm_iproc_i2c_slave_isr+0x2b8/0x8e4 bcm_iproc_i2c_isr+0x178/0x290 __handle_irq_event_percpu+0xd0/0x200 handle_irq_event+0x60/0x1a0 handle_fasteoi_irq+0x130/0x220 __handle_domain_irq+0x8c/0xcc gic_handle_irq+0xc0/0x120 el1_irq+0xcc/0x180 finish_task_switch+0x100/0x1d8 __schedule+0x61c/0x7a0 schedule_idle+0x28/0x44 do_idle+0x254/0x28c cpu_startup_entry+0x28/0x2c rest_init+0xc4/0xd0 arch_call_rest_init+0x14/0x1c start_kernel+0x33c/0x3b8 Code: f9423260 910013e2 11000509 b9047a69 (f9419009) ---[ end trace 4781455b2a7bec15 ]--- Fixes: 4d658451c9d6 ("i2c: iproc: handle rx fifo full interrupt") Signed-off-by: Dhananjay Phadke <[email protected]> Acked-by: Ray Jui <[email protected]> Acked-by: Rayagonda Kokatanur <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-08-10net: bridge: fix memleak in br_add_if()Yang Yingliang1-0/+2
I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-10net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted ↵Vladimir Oltean11-14/+14
by drivers towards the bridge The blamed commit added a new field to struct switchdev_notifier_fdb_info, but did not make sure that all call paths set it to something valid. For example, a switchdev driver may emit a SWITCHDEV_FDB_ADD_TO_BRIDGE notifier, and since the 'is_local' flag is not set, it contains junk from the stack, so the bridge might interpret those notifications as being for local FDB entries when that was not intended. To avoid that now and in the future, zero-initialize all switchdev_notifier_fdb_info structures created by drivers such that all newly added fields to not need to touch drivers again. Fixes: 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications") Reported-by: Ido Schimmel <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Tested-by: Ido Schimmel <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: Karsten Graul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-10net: bridge: fix flags interpretation for extern learn fdb entriesNikolay Aleksandrov4-12/+11
Ignore fdb flags when adding port extern learn entries and always set BR_FDB_LOCAL flag when adding bridge extern learn entries. This is closest to the behaviour we had before and avoids breaking any use cases which were allowed. This patch fixes iproute2 calls which assume NUD_PERMANENT and were allowed before, example: $ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn Extern learn entries are allowed to roam, but do not expire, so static or dynamic flags make no sense for them. Also add a comment for future reference. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry") Reviewed-by: Ido Schimmel <[email protected]> Tested-by: Ido Schimmel <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-10KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulationSean Christopherson1-1/+1
Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to effectively get the controls for the current VMCS, as opposed to using vmx->secondary_exec_controls, which is the cached value of KVM's desired controls for vmcs01 and truly not reflective of any particular VMCS. While the waitpkg control is not dynamic, i.e. vmcs01 will always hold the same waitpkg configuration as vmx->secondary_exec_controls, the same does not hold true for vmcs02 if the L1 VMM hides the feature from L2. If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL, L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP. Fixes: 6e3ba4abcea5 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-08-10Merge tag 'platform-drivers-x86-v5.14-3' of ↵Linus Torvalds6-19/+104
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Small set of pdx86 fixes for 5.14" * tag 'platform-drivers-x86-v5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: pcengines-apuv2: Add missing terminating entries to gpio-lookup tables platform/x86: Make dual_accel_detect() KIOX010A + KIOX020A detect more robust platform/x86: Add and use a dual_accel_detect() helper
2021-08-10Merge tag 'ovl-fixes-5.14-rc6-v2' of ↵Linus Torvalds4-16/+80
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Fix several bugs in overlayfs" * tag 'ovl-fixes-5.14-rc6-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: prevent private clone if bind mount is not allowed ovl: fix uninitialized pointer read in ovl_lookup_real_one() ovl: fix deadlock in splice write ovl: skip stale entries in merge dir cache iteration
2021-08-10cifs: use the correct max-length for dentry_path_raw()Ronnie Sahlberg1-1/+1
RHBZ: 1972502 PATH_MAX is 4096 but PAGE_SIZE can be >4096 on some architectures such as ppc and would thus write beyond the end of the actual object. Cc: <[email protected]> Reported-by: Xiaoli Feng <[email protected]> Suggested-by: Brian foster <[email protected]> Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-08-10Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski7-15/+27
Daniel Borkmann says: ==================== bpf 2021-08-10 We've added 5 non-merge commits during the last 2 day(s) which contain a total of 7 files changed, 27 insertions(+), 15 deletions(-). 1) Fix missing bpf_read_lock_trace() context for BPF loader progs, from Yonghong Song. 2) Fix corner case where BPF prog retrieves wrong local storage, also from Yonghong Song. 3) Restrict availability of BPF write_user helper behind lockdown, from Daniel Borkmann. 4) Fix multiple kernel-doc warnings in BPF core, from Randy Dunlap. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, core: Fix kernel-doc notation bpf: Fix potentially incorrect results with bpf_get_local_storage() bpf: Add missing bpf_read_[un]lock_trace() for syscall program bpf: Add lockdown check for probe_write_user helper bpf: Add _kernel suffix to internal lockdown_bpf_read ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-10drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_workAnson Jacob1-1/+1
Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work can't sleep. BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8 Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 Workqueue: events_highpri dm_irq_work_func [amdgpu] Call Trace: <IRQ> dump_stack+0x5e/0x74 ___might_sleep.cold+0x87/0x98 __might_sleep+0x4b/0x80 kmem_cache_alloc_trace+0x390/0x4f0 amdgpu_dm_irq_handler+0x171/0x230 [amdgpu] amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu] amdgpu_ih_process+0x81/0x100 [amdgpu] amdgpu_irq_handler+0x26/0xa0 [amdgpu] __handle_irq_event_percpu+0x49/0x190 ? __hrtimer_get_next_event+0x4d/0x80 handle_irq_event_percpu+0x33/0x80 handle_irq_event+0x33/0x60 handle_edge_irq+0x82/0x190 asm_call_irq_on_stack+0x12/0x20 </IRQ> common_interrupt+0xbb/0x140 asm_common_interrupt+0x1e/0x40 RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu] Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3 RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286 RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000 RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430 R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430 ? amdgpu_cgs_write_register+0x20/0x20 [amdgpu] amdgpu_device_rreg+0x17/0x20 [amdgpu] amdgpu_cgs_read_register+0x14/0x20 [amdgpu] dm_read_reg_func+0x38/0xb0 [amdgpu] generic_reg_wait+0x80/0x160 [amdgpu] dce_aux_transfer_raw+0x324/0x7c0 [amdgpu] dc_link_aux_transfer_raw+0x43/0x50 [amdgpu] dm_dp_aux_transfer+0x87/0x110 [amdgpu] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper] drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] ? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] ? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] handle_hpd_rx_irq+0x195/0x240 [amdgpu] ? __switch_to_asm+0x42/0x70 ? __switch_to+0x131/0x450 dm_irq_work_func+0x19/0x20 [amdgpu] process_one_work+0x209/0x400 worker_thread+0x4d/0x3e0 ? cancel_delayed_work+0xa0/0xa0 kthread+0x124/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Reviewed-by: Aurabindo Jayamohanan Pillai <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Anson Jacob <[email protected]> Cc: [email protected] Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-10drm/amd/display: Remove invalid assert for ODM + MPC caseEric Bernstein1-1/+0
Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Eric Bernstein <[email protected]> Cc: [email protected] Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-10drm/amd/pm: bug fix for the runtime pm BACOKenneth Feng1-2/+1
In some systems only MACO is supported. This is to fix the problem that runtime pm is enabled but BACO is not supported. MACO will be handled seperately. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Jack Gui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-08-10drm/amdgpu: handle VCN instances when harvesting (v2)Alex Deucher1-3/+9
There may be multiple instances and only one is harvested. v2: fix typo in commit message Fixes: 83a0b8639185 ("drm/amdgpu: add judgement when add ip blocks (v2)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1673 Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-08-10genirq/msi: Ensure deactivation on teardownBixuan Cui1-5/+8
msi_domain_alloc_irqs() invokes irq_domain_activate_irq(), but msi_domain_free_irqs() does not enforce deactivation before tearing down the interrupts. This happens when PCI/MSI interrupts are set up and never used before being torn down again, e.g. in error handling pathes. The only place which cleans that up is the error handling path in msi_domain_alloc_irqs(). Move the cleanup from msi_domain_alloc_irqs() into msi_domain_free_irqs() to cure that. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Signed-off-by: Bixuan Cui <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10Merge tag 'gvt-fixes-2021-08-10' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi2-0/+3
drm-intel-fixes gvt-fixes-2021-08-10 - Fix windows VM hang issue for atomics workaround (Zhenyu) Signed-off-by: Rodrigo Vivi <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-08-10genirq/timings: Prevent potential array overflow in __irq_timings_store()Ben Dai1-0/+5
When the interrupt interval is greater than 2 ^ PREDICTION_BUFFER_SIZE * PREDICTION_FACTOR us and less than 1s, the calculated index will be greater than the length of irqs->ema_time[]. Check the calculated index before using it to prevent array overflow. Fixes: 23aa3b9a6b7d ("genirq/timings: Encapsulate storing function") Signed-off-by: Ben Dai <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10pinctrl: sunxi: Don't underestimate number of functionsAndre Przywara1-3/+5
When we are building all the various pinctrl structures for the Allwinner pinctrl devices, we do some estimation about the maximum number of distinct function (names) that we will need. So far we take the number of pins as an upper bound, even though we can actually have up to four special functions per pin. This wasn't a problem until now, since we indeed have typically far more pins than functions, and most pins share common functions. However the H616 "-r" pin controller has only two pins, but four functions, so we run over the end of the array when we are looking for a matching function name in sunxi_pinctrl_add_function - there is no NULL sentinel left that would terminate the loop: [ 8.200648] Unable to handle kernel paging request at virtual address fffdff7efbefaff5 [ 8.209179] Mem abort info: .... [ 8.368456] Call trace: [ 8.370925] __pi_strcmp+0x90/0xf0 [ 8.374559] sun50i_h616_r_pinctrl_probe+0x1c/0x28 [ 8.379557] platform_probe+0x68/0xd8 Do an actual worst case allocation (4 functions per pin, three common functions and the sentinel) for the initial array allocation. This is now heavily overestimating the number of functions in the common case, but we will reallocate this array later with the actual number of functions, so it's only temporarily. Fixes: 561c1cf17c46 ("pinctrl: sunxi: Add support for the Allwinner H616-R pin controller") Signed-off-by: Andre Przywara <[email protected]> Acked-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2021-08-10sched: Replace deprecated CPU-hotplug functions.Sebastian Andrzej Siewior1-2/+2
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-08-10ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 650 G8 Notebook PCJeremy Szu1-0/+1
The HP ProBook 650 G8 Notebook PC is using ALC236 codec which is using 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Jeremy Szu <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-08-10Merge branch 'fdb-backpressure-fixes'David S. Miller4-22/+37
Vladimir Oltean says: ==================== Fix broken backpressure during FDB dump in DSA drivers rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. DSA is one of the few switchdev drivers that have an .ndo_fdb_dump implementation, because of the assumption that the hardware and software FDBs cannot be efficiently kept in sync via SWITCHDEV_FDB_ADD_TO_BRIDGE. Other drivers with a home-cooked .ndo_fdb_dump implementation are ocelot and dpaa2-switch. These appear to do the correct thing, as do the other DSA drivers, so nothing else appears to need fixing. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: sja1105: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-1/+3
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: lantiq: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-4/+10
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: lan9303: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-15/+19
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: hellcreek: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-2/+5
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Kurt Kanzenbach <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10bpf, core: Fix kernel-doc notationRandy Dunlap1-1/+6
Fix kernel-doc warnings in kernel/bpf/core.c (found by scripts/kernel-doc and W=1 builds). That is, correct a function name in a comment and add return descriptions for 2 functions. Fixes these kernel-doc warnings: kernel/bpf/core.c:1372: warning: expecting prototype for __bpf_prog_run(). Prototype was for ___bpf_prog_run() instead kernel/bpf/core.c:1372: warning: No description found for return value of '___bpf_prog_run' kernel/bpf/core.c:1883: warning: No description found for return value of 'bpf_prog_select_runtime' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-08-10net: igmp: fix data-race in igmp_ifc_timer_expire()Eric Dumazet1-7/+14
Fix the data-race reported by syzbot [1] Issue here is that igmp_ifc_timer_expire() can update in_dev->mr_ifc_count while another change just occured from another context. in_dev->mr_ifc_count is only 8bit wide, so the race had little consequences. [1] BUG: KCSAN: data-race in igmp_ifc_event / igmp_ifc_timer_expire write to 0xffff8881051e3062 of 1 bytes by task 12547 on cpu 0: igmp_ifc_event+0x1d5/0x290 net/ipv4/igmp.c:821 igmp_group_added+0x462/0x490 net/ipv4/igmp.c:1356 ____ip_mc_inc_group+0x3ff/0x500 net/ipv4/igmp.c:1461 __ip_mc_join_group+0x24d/0x2c0 net/ipv4/igmp.c:2199 ip_mc_join_group_ssm+0x20/0x30 net/ipv4/igmp.c:2218 do_ip_setsockopt net/ipv4/ip_sockglue.c:1285 [inline] ip_setsockopt+0x1827/0x2a80 net/ipv4/ip_sockglue.c:1423 tcp_setsockopt+0x8c/0xa0 net/ipv4/tcp.c:3657 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3362 __sys_setsockopt+0x18f/0x200 net/socket.c:2159 __do_sys_setsockopt net/socket.c:2170 [inline] __se_sys_setsockopt net/socket.c:2167 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2167 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881051e3062 of 1 bytes by interrupt on cpu 1: igmp_ifc_timer_expire+0x706/0xa30 net/ipv4/igmp.c:808 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1419 expire_timers+0x135/0x250 kernel/time/timer.c:1464 __run_timers+0x358/0x420 kernel/time/timer.c:1732 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1745 __do_softirq+0x12c/0x26e kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x9a/0xb0 kernel/softirq.c:636 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1100 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 console_unlock+0x8e8/0xb30 kernel/printk/printk.c:2646 vprintk_emit+0x125/0x3d0 kernel/printk/printk.c:2174 vprintk_default+0x22/0x30 kernel/printk/printk.c:2185 vprintk+0x15a/0x170 kernel/printk/printk_safe.c:392 printk+0x62/0x87 kernel/printk/printk.c:2216 selinux_netlink_send+0x399/0x400 security/selinux/hooks.c:6041 security_netlink_send+0x42/0x90 security/security.c:2070 netlink_sendmsg+0x59e/0x7c0 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2475 __do_sys_sendmsg net/socket.c:2484 [inline] __se_sys_sendmsg net/socket.c:2482 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x01 -> 0x02 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 12539 Comm: syz-executor.1 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: Fix memory leak in ieee802154_raw_deliverTakeshi Misawa1-1/+6
If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked. Fix this, by freeing sk_receive_queue in sk->sk_destruct(). syzbot report: BUG: memory leak unreferenced object 0xffff88810f644600 (size 232): comm "softirq", pid 0, jiffies 4294967032 (age 81.270s) hex dump (first 32 bytes): 10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K..... 00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K..... backtrace: [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496 [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline] [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070 [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384 [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498 [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline] [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662 [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline] [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline] [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline] [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284 [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35 [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557 [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345 [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline] [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235 [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198 [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline] [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline] [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221 [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295 [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline] [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674 [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977 [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline] [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline] [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985 Fixes: 9ec767160357 ("net: add IEEE 802.15.4 socket family implementation") Reported-and-tested-by: [email protected] Signed-off-by: Takeshi Misawa <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP Signed-off-by: Stefan Schmidt <[email protected]>
2021-08-10x86/msi: Force affinity setup before startupThomas Gleixner2-4/+9
The X86 MSI mechanism cannot handle interrupt affinity changes safely after startup other than from an interrupt handler, unless interrupt remapping is enabled. The startup sequence in the generic interrupt code violates that assumption. Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that the default interrupt setting happens before the interrupt is started up for the first time. While the interrupt remapping MSI chip does not require this, there is no point in treating it differently as this might spare an interrupt to a CPU which is not in the default affinity mask. For the non-remapping case go to the direct write path when the interrupt is not yet started similar to the not yet activated case. Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10x86/ioapic: Force affinity setup before startupThomas Gleixner1-2/+4
The IO/APIC cannot handle interrupt affinity changes safely after startup other than from an interrupt handler. The startup sequence in the generic interrupt code violates that assumption. Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that the default interrupt setting happens before the interrupt is started up for the first time. Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUPThomas Gleixner2-1/+6
X86 IO/APIC and MSI interrupts (when used without interrupts remapping) require that the affinity setup on startup is done before the interrupt is enabled for the first time as the non-remapped operation mode cannot safely migrate enabled interrupts from arbitrary contexts. Provide a new irq chip flag which allows affected hardware to request this. This has to be opt-in because there have been reports in the past that some interrupt chips cannot handle affinity setting before startup. Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Protect msi_desc::masked for multi-MSIThomas Gleixner4-10/+13
Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()Thomas Gleixner1-1/+1
No point in using the raw write function from shutdown. Preparatory change to introduce proper serialization for the msi_desc::masked cache. Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Correct misleading commentsThomas Gleixner1-4/+1
The comments about preserving the cached state in pci_msi[x]_shutdown() are misleading as the MSI descriptors are freed right after those functions return. So there is nothing to restore. Preparatory change. Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Do not set invalid bits in MSI maskThomas Gleixner1-4/+4
msi_mask_irq() takes a mask and a flags argument. The mask argument is used to mask out bits from the cached mask and the flags argument to set bits. Some places invoke it with a flags argument which sets bits which are not used by the device, i.e. when the device supports up to 8 vectors a full unmask in some places sets the mask to 0xFFFFFF00. While devices probably do not care, it's still bad practice. Fixes: 7ba1930db02f ("PCI MSI: Unmask MSI if setup failed") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Enforce MSI[X] entry updates to be visibleThomas Gleixner1-0/+5
Nothing enforces the posted writes to be visible when the function returns. Flush them even if the flush might be redundant when the entry is masked already as the unmask will flush as well. This is either setup or a rare affinity change event so the extra flush is not the end of the world. While this is more a theoretical issue especially the logic in the X86 specific msi_set_affinity() function relies on the assumption that the update has reached the hardware when the function returns. Again, as this never has been enforced the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Enforce that MSI-X table entry is masked for updateThomas Gleixner1-0/+15
The specification (PCIe r5.0, sec 6.1.4.5) states: For MSI-X, a function is permitted to cache Address and Data values from unmasked MSI-X Table entries. However, anytime software unmasks a currently masked MSI-X Table entry either by clearing its Mask bit or by clearing the Function Mask bit, the function must update any Address or Data values that it cached from that entry. If software changes the Address or Data value of an entry while the entry is unmasked, the result is undefined. The Linux kernel's MSI-X support never enforced that the entry is masked before the entry is modified hence the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Enforce the entry to be masked across the update. There is no point in enforcing this to be handled at all possible call sites as this is just pointless code duplication and the common update function is the obvious place to enforce this. Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Reported-by: Kevin Tian <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Mask all unused MSI-X entriesThomas Gleixner1-18/+27
When MSI-X is enabled the ordering of calls is: msix_map_region(); msix_setup_entries(); pci_msi_setup_msi_irqs(); msix_program_entries(); This has a few interesting issues: 1) msix_setup_entries() allocates the MSI descriptors and initializes them except for the msi_desc:masked member which is left zero initialized. 2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets up the MSI interrupts which ends up in pci_write_msi_msg() unless the interrupt chip provides its own irq_write_msi_msg() function. 3) msix_program_entries() does not do what the name suggests. It solely updates the entries array (if not NULL) and initializes the masked member for each MSI descriptor by reading the hardware state and then masks the entry. Obviously this has some issues: 1) The uninitialized masked member of msi_desc prevents the enforcement of masking the entry in pci_write_msi_msg() depending on the cached masked bit. Aside of that half initialized data is a NONO in general 2) msix_program_entries() only ensures that the actually allocated entries are masked. This is wrong as experimentation with crash testing and crash kernel kexec has shown. This limited testing unearthed that when the production kernel had more entries in use and unmasked when it crashed and the crash kernel allocated a smaller amount of entries, then a full scan of all entries found unmasked entries which were in use in the production kernel. This is obviously a device or emulation issue as the device reset should mask all MSI-X table entries, but obviously that's just part of the paper specification. Cure this by: 1) Masking all table entries in hardware 2) Initializing msi_desc::masked in msix_setup_entries() 3) Removing the mask dance in msix_program_entries() 4) Renaming msix_program_entries() to msix_update_entries() to reflect the purpose of that function. As the masking of unused entries has never been done the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10PCI/MSI: Enable and mask MSI-X earlyThomas Gleixner1-13/+15
The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d6432e105 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d6432e105 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Ashok Raj <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-08-10Merge branch 'ks8795-vlan-fixes'David S. Miller3-21/+74
Ben Hutchings says: ==================== ksz8795 VLAN fixes This series fixes a number of bugs in the ksz8795 driver that affect VLAN filtering, tag insertion, and tag removal. I've tested these on the KSZ8795CLXD evaluation board, and checked the register usage against the datasheets for the other supported chips. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Don't use phy_port_cnt in VLAN table lookupBen Hutchings1-4/+4
The magic number 4 in VLAN table lookup was the number of entries we can read and write at once. Using phy_port_cnt here doesn't make sense and presumably broke VLAN filtering for 3-port switches. Change it back to 4. Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt ...") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Fix VLAN filteringBen Hutchings1-0/+11
Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable hardware flag. That controls discarding of packets with a VID that has not been enabled for any port on the switch. Since it is a global flag, set the dsa_switch::vlan_filtering_is_global flag so that the DSA core understands this can't be controlled per port. When VLAN filtering is enabled, the switch should also discard packets with a VID that's not enabled on the ingress port. Set or clear each external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering() to make that happen. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Use software untagging on CPU portBen Hutchings1-1/+8
On the CPU port, we can support both tagged and untagged VLANs at the same time by doing any necessary untagging in software rather than hardware. To enable that, keep the CPU port's Remove Tag flag cleared and set the dsa_switch::untag_bridge_pvid flag. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Fix VLAN untagged flag change on deletionBen Hutchings1-3/+0
When a VLAN is deleted from a port, the flags in struct switchdev_obj_port_vlan are always 0. ksz8_port_vlan_del() copies the BRIDGE_VLAN_INFO_UNTAGGED flag to the port's Tag Removal flag, and therefore always clears it. In case there are multiple VLANs configured as untagged on this port - which seems useless, but is allowed - deleting one of them changes the remaining VLANs to be tagged. It's only ever necessary to change this flag when a VLAN is added to the port, so leave it unchanged in ksz8_port_vlan_del(). Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Reject unsupported VLAN configurationBen Hutchings2-1/+27
The switches supported by ksz8795 only have a per-port flag for Tag Removal. This means it is not possible to support both tagged and untagged VLANs on the same port. Reject attempts to add a VLAN that requires the flag to be changed, unless there are no VLANs currently configured. VID 0 is excluded from this check since it is untagged regardless of the state of the flag. On the CPU port we could support tagged and untagged VLANs at the same time. This will be enabled by a later patch. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-10net: dsa: microchip: ksz8795: Fix PVID tag insertionBen Hutchings2-7/+23
ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this: * Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist. * When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID. * When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.