aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-28bridge: Add multicast data-path hooksHerbert Xu2-4/+29
This patch finally hooks up the multicast snooping module to the data path. In particular, all multicast packets passing through the bridge are fed into the module and switched by it. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Add multicast start/stop hooksHerbert Xu4-1/+12
This patch hooks up the bridge start/stop and add/delete/disable port functions to the new multicast module. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Add multicast forwarding functionsHerbert Xu2-0/+82
This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Add core IGMP snooping supportHerbert Xu4-0/+1288
This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Split may_deliver/deliver_clone out of br_floodHerbert Xu1-23/+46
This patch moves the main loop body in br_flood into the function may_deliver. The code that clones an skb and delivers it is moved into the deliver_clone function. This allows this to be reused by the future multicast forward function. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Use BR_INPUT_SKB_CB on xmit pathHerbert Xu2-2/+5
this patch makes BR_INPUT_SKB_CB available on the xmit path so that we could avoid passing the br pointer around for the purpose of collecting device statistics. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Avoid unnecessary clone on forward pathHerbert Xu3-16/+25
When the packet is delivered to the local bridge device we may end up cloning it unnecessarily if no bridge port can receive the packet in br_flood. This patch avoids this by moving the skb_clone into br_flood. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Allow tail-call on br_pass_frame_upHerbert Xu2-5/+13
This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bridge: Do br_pass_frame_up after other portsHerbert Xu1-3/+3
At the moment we deliver to the local bridge port via the function br_pass_frame_up before all other ports. There is no requirement for this. For the purpose of IGMP snooping, it would be more convenient if we did the local port last. Therefore this patch rearranges the bridge input processing so that the local bridge port gets to see the packet last (if at all). Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28Bluetooth: Fix out of scope variable access in hci_sock_cmsg()Johann Felix Soden1-1/+3
The pointer data can point to the variable ctv. Access to data happens when ctv is already out of scope. Signed-off-by: Johann Felix Soden <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2010-02-28tg3: Remove now useless VPD codeMatt Carlson1-29/+23
Now that the VPD searching code is abstracted away, the outer loop used to detect the read-only large resource data type section is useless. Signed-off-by: Matt Carlson <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28bnx2: Remove now useless VPD codeMatt Carlson1-45/+29
Now that the VPD searching code is abstracted away, the outer loop used to detect the read-only large resource data type section is useless. Signed-off-by: Matt Carlson <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28pci: Add helper to search for VPD keywordsMatt Carlson4-43/+78
This patch adds the pci_vpd_find_info_keyword() helper function to find information field keywords within read-only and read-write large resource data type sections. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28pci: Add VPD information field helper functionsMatt Carlson3-8/+23
This patch adds a preprocessor constant to describe the PCI VPD information field header size and an inline function to extract the size of the information field itself. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28pci: Add helper to find a VPD resource data typeMatt Carlson5-42/+65
This patch adds the pci_vpd_find_tag() helper function to find VPD resource data types in a buffer. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28pci: Add large and small resource data type codeMatt Carlson3-13/+67
This patch introduces more VPD preprocessor definitions to identify some small and large resource data type item names. The patch then continues to correct how the tg3 and bnx2 drivers search for the "read-only data" large resource data type. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-28pci: Add PCI LRDT tag size and section sizeMatt Carlson3-10/+25
This patch adds a preprocessor constant to describe the PCI VPD large resource data type tag size and an inline function to extract the large resource section size from the large resource data type tag. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Acked-by: Jesse Barnes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-02-27Merge branch 'for-linus' of ↵Linus Torvalds48-1436/+1111
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits) m68k: Define sigcontext ABI of ColdFire m68knommu: NPTL support for uClinux m68k: Add NPTL support m68k: Eliminate unused variable in page_to_phys() m68k: Switch to generic siginfo layout macfb: fix 24-bit visual and stuff macfb: cleanup fbdev: add some missing mac modes mac68k: start CUDA early valkyriefb: various fixes fbdev: mac_var_to_mode() fix mac68k: move macsonic and macmace platform devices mac68k: move mac_esp platform device mac68k: replace mac68k SCC code with platform device pmac-zilog: add platform driver pmac-zilog: cleanup mac68k: rework SWIM platform device mac68k: cleanup ataflop: Killl warning about unused variable flags m68k: Use DIV_ROUND_CLOSEST ...
2010-02-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds95-1501/+2207
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (35 commits) [S390] time: remove unused code [S390] zcore: Add prefix registers to dump header [S390] correct vdso version string [S390] add support for compressed kernels [S390] Define new s390 ELF note sections in elf.h [S390] codepage conversion of kernel parameter line [S390] seq_file: convert drivers/s390/ [S390] add z9-ec/z10 instruction to kernel disassembler [S390] dasd: correct offline processing [S390] dasd: fix refcounting. [S390] dasd: fix online/offline race [S390] use kprobes_built_in() in mm/fault code [S390] bug: use relative pointers in bug table entries [S390] Cleanup struct _lowcore usage and defines. [S390] free_initmem: reduce code duplication [S390] Replace ENOTSUPP usage with EOPNOTSUPP [S390] spinlock: check virtual cpu running status [S390] sysinfo: fix SYSIB 3,2,2 structure [S390] add MACHINE_IS_LPAR flag [S390] qdio: optimize cache line usage of struct qdio_irq ...
2010-02-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds297-11205/+15899
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds27-1254/+1257
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: validate late-added resources pcmcia: allow for extension of resource interval pcmcia: remove useless msleep in ds.c pcmcia: use read_cis_mem return value pcmcia: handle error in serial_cs config calls pcmcia: add locking to pcmcia_{read,write}_cis_mem pcmcia: avoid prod_id memleak pcmcia: avoid sysfs-related lockup for cardbus pcmcia: use state machine for extended requery pcmcia: delay re-scanning and re-querying of PCMCIA bus pcmcia: use pccardd to handle eject, insert, suspend and resume requests pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking pcmcia: use mutex for dynid lock pcmcia: assert locking to struct pcmcia_device pcmcia: add locking documentation pcmcia: simplify locking pcmcia: add locking to struct pcmcia_socket->pcmcia_state() pcmcia: protect s->device_count pcmcia: properly lock skt->irq, skt->irq_mask pcmcia: lock ops->set_socket ...
2010-02-27Merge branch 'next' of ↵Linus Torvalds128-803/+4900
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits) powerpc: Fix lwsync feature fixup vs. modules on 64-bit powerpc: Convert pmc_owner_lock to raw_spinlock powerpc: Convert die.lock to raw_spinlock powerpc: Convert tlbivax_lock to raw_spinlock powerpc: Convert mpic locks to raw_spinlock powerpc: Convert pmac_pic_lock to raw_spinlock powerpc: Convert big_irq_lock to raw_spinlock powerpc: Convert feature_lock to raw_spinlock powerpc: Convert i8259_lock to raw_spinlock powerpc: Convert beat_htab_lock to raw_spinlock powerpc: Convert confirm_error_lock to raw_spinlock powerpc: Convert ipic_lock to raw_spinlock powerpc: Convert native_tlbie_lock to raw_spinlock powerpc: Convert beatic_irq_mask_lock to raw_spinlock powerpc: Convert nv_lock to raw_spinlock powerpc: Convert context_lock to raw_spinlock powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards powerpc/86xx: Enable VME driver on the GE SBC610 powerpc/86xx: Enable VME driver on the GE PPC9A powerpc/86xx: Add MSI section to GE PPC9A DTS ...
2010-02-27m68k: Define sigcontext ABI of ColdFireMaxim Kuvyrkov3-0/+17
The following patch defines sigcontext ABI of ColdFire. Due to ISA restrictions ColdFire needs different rt_sigreturn trampoline. And due to ColdFire FP registers being 8-bytes instead of 12-bytes on m68k, sigcontext and fpregset structures should be updated. Regarding the sc_fpstate[16+6*8] field, it would've been enough 16 bytes to store ColdFire's FP state. To accomodate GLIBC's libSegFault it would'be been enough 6*8 bytes (room for the 6 non-call-clobbered FP registers). I set it to 16+6*8 to provide some extra space for any future changes in the ColdFire FPU. Signed-off-by: Maxim Kuvyrkov <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68knommu: NPTL support for uClinuxMaxim Kuvyrkov5-0/+50
Port syscalls for NPTL support to m68knommu. Signed-off-by: Maxim Kuvyrkov <[email protected]> Acked-by: Greg Ungerer <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Add NPTL supportMaxim Kuvyrkov7-1/+102
This patch adds several syscalls, that provide necessary functionality to support NPTL on m68k/ColdFire. The syscalls are get_thread_area, set_thread_area, atomic_cmpxchg_32 and atomic_barrier. The cmpxchg syscall is required for ColdFire as it doesn't support 'cas' instruction. Also a ptrace call PTRACE_GET_THREAD_AREA is added to allow debugger to inspect the TLS storage. Signed-off-by: Maxim Kuvyrkov <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Eliminate unused variable in page_to_phys()Geert Uytterhoeven1-6/+1
"pgdat" is unused, so we can eliminate it and turn page_to_phys() into a single-line macro. Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Switch to generic siginfo layoutMaxim Kuvyrkov1-91/+0
This patch switches m68k to generic siginfo layout. The custom layout of m68k's `struct siginfo' had several issues due to not considering aliasing of members in the union, e.g., _uid32 was at different offsets in ._kill, ._rt and ._sigchld. Signed-off-by: Maxim Kuvyrkov <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27macfb: fix 24-bit visual and stuffFinn Thain1-84/+60
Lots of changes. Remove volatile keywords. Take the advice in the comments and change video_slot to slot_addr. Factor out fifteen or so "channel >> 8" shifts into three shifts higher up the call graph. Make csc_setpalette() atomic, pass the correct color values. Check for ioremap() failure. Add missing break statement, thus fixing 24 bit console visual (blue background bug). Remove some uninformative printk() noise. Add a description for powerbook 140/170 graphics. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27macfb: cleanupFinn Thain1-282/+295
Cleanup whitespace and code style. Remove unused #includes and prototypes. Remove obsolete, redundant or misleading comments. Remove dead code and redundant initialisers. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27fbdev: add some missing mac modesFinn Thain1-24/+28
Add the missing mac video modes for the Portrait and 12" RGB displays. The specs come from the Mac LC III developer note. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: start CUDA earlyFinn Thain3-35/+51
The valkyriefb driver needs the CUDA to work in order to set the video mode at boot. So initialise the device earlier, and bring the m68k code closer to the powermac code. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27valkyriefb: various fixesFinn Thain3-73/+17
Valkyriefb and macfb will adopt the same card if they get the chance, so remove valkyrie support from macfb. Also fix the "valkyriefb: can't do 832x624x8" problem reported by Raylynn Knight some time ago, by adding vmode 13 support for CONFIG_MAC. Also add vmode 11 since that works too. Make use of the monitor sense lines on 68k Macs too. Also some cleanups. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27fbdev: mac_var_to_mode() fixFinn Thain1-9/+31
The valkyriefb driver assumes that this logic holds: mac_vmode_to_var(X, cmode, &var); mac_var_to_vmode(&var, &vmode, &cmode); assert(vmode == X); But it doesn't hold because mac_var_to_vmode() can return a mode with a slower pixel clock, even when a match is available. So we end up with this failure: using video mode 11 and color mode 0. valkyriefb: vmode 12 not valid. valkyriefb: can't set default video mode valkyriefb: vmode 12 not valid. Rather than have mac_var_to_mode() return the first reasonable mode it finds, have it return the mode that is closest to the requested one (or the mode with the closest longer pixel clock period if there is no exact match). Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: move macsonic and macmace platform devicesFinn Thain3-58/+31
Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: move mac_esp platform deviceFinn Thain2-52/+32
Move platform device code from the driver to the platform init function. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: replace mac68k SCC code with platform deviceFinn Thain11-522/+80
Remove the old 68k Mac serial port code and a lot of related cruft. Add new SCC platform devices to mac 68k platform. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27pmac-zilog: add platform driverFinn Thain5-25/+166
Add platform driver support to the pmac-zilog driver, for m68k macs. Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC. Signed-off-by: Finn Thain <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27pmac-zilog: cleanupFinn Thain2-54/+51
Whitespace cleanups and comment typo fix. Signed-off-by: Finn Thain <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: rework SWIM platform deviceFinn Thain2-21/+18
Adjust the platform device code to conform with the code style used in the rest of this patch series. No need to name resources nor to register devices which are not applicable. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27mac68k: cleanupFinn Thain1-111/+97
Cleanup whitespace and comments. Remove some dead code. Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27ataflop: Killl warning about unused variable flagsGeert Uytterhoeven1-2/+0
After commit e0c0978699a83f26f2341f7eedc1463b79e31aff ("ataflop: remove buggy/commented-out IRQ disable from do_fd_request()") the `flags' variable became unused: drivers/block/ataflop.c:1473: warning: unused variable 'flags' Hence remove it. Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Use DIV_ROUND_CLOSESTJulia Lawall1-1/+1
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: vme_scc - __init annotationsPeter Huewe1-6/+6
Trivial patch which adds the __init macro to the module_init function and all of its helper functions of drivers/char/vme_scc.c Signed-off-by: Peter Huewe <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k{,nommu}/h8300: Remove obsolete comment about map_chunkPhilippe De Muyter3-5/+3
Remove the comments referring to a function map_chunk that no longer exists. Signed-off-by: Philippe De Muyter <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Allow ioremapping top of memoryPhilippe De Muyter1-1/+1
The test in __ioremap to reject memory ranges crossing the 0 boundary rejects also memory ranges ending at the end of the memory. Fix that. Signed-off-by: Philippe De Muyter <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27m68k: Fix asm/swab.h for ColdFireMaxim Kuvyrkov1-1/+1
Make asm/swab.h compatible with ColdFire ISA_B CPUs. Signed-off-by: Maxim Kuvyrkov <[email protected]> Acked-by: Greg Ungerer <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2010-02-27Bluetooth: Add SCO fallback for unsupported feature errorStephen Coe1-0/+1
The Bluetooth SIG PTS test case: TC_AG_ACS_BV_10_I, rejects eSCO with "Unsupported Feature or Parameter Value" (0x11). This patch adds case for SCO fallback. 2007-09-20 12:20:37.787747 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 38 packets 1 2007-09-20 12:20:37.842154 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 38 voice setting 0x0060 2007-09-20 12:20:37.847037 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2007-09-20 12:20:37.855233 > HCI Event: Max Slots Change (0x1b) plen 3 handle 38 slots 1 2007-09-20 12:20:39.913354 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x11 handle 38 bdaddr 00:16:93:01:01:7A type eSCO Error: Unsupported Feature or Parameter Value 2007-09-20 12:20:39.922629 > HCI Event: Max Slots Change (0x1b) plen 3 handle 38 slots 5 2007-09-20 12:20:58.126886 < ACL data: handle 38 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 0] 0000: 0b 53 01 b8 .S.. 2007-09-20 12:20:58.130138 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 38 packets 1 Signed-off-by: Stephen Coe <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2010-02-27Bluetooth: Add controller types for BR/EDR and 802.11 AMPMarcel Holtmann4-1/+30
With the Bluetooth 3.0 specification and the introduction of alternate MAC/PHY (AMP) support, it is required to differentiate between primary BR/EDR controllers and 802.11 AMP controllers. So introduce a special type inside HCI device for differentiation. For now all AMP controllers will be treated as raw devices until an AMP manager has been implemented. Signed-off-by: Marcel Holtmann <[email protected]>
2010-02-27Bluetooth: Convert Marvell driver to use per adapter debugfsMarcel Holtmann1-7/+7
The debugfs support of the Marvell driver is buggy. It is limited to one controller per system. Fix this by using the controller specific debugfs directory as parent. Signed-off-by: Marcel Holtmann <[email protected]>
2010-02-27Bluetooth: Convert inquiry cache to use debugfs instead of sysfsMarcel Holtmann2-30/+64
The output of the inquiry cache is only useful for debugging purposes and so move it into debugfs. Signed-off-by: Marcel Holtmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.