aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-21usb: hso: remove the bailout parameterDongliang Mu1-3/+3
There are two invocation sites of hso_free_net_device. After refactoring hso_create_net_device, this parameter is useless. Remove the bailout in the hso_free_net_device and change the invocation sites of this function. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21usb: hso: fix error handling code of hso_create_net_deviceDongliang Mu1-10/+23
The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21i40e: add support for PTP external synchronization clockPiotr Kwapulinski4-20/+871
Add support for external synchronization clock via GPIOs. 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2, SDP3_3 and GPIO_4. Previously it was not possible to use the external PTP synchronization clock. All possible HW configurations are supported. SDP3_2, SDP3_3, GPIO_4 off, off, off off, in_A, off off, out_A, off off, in_B, off off, out_B, off in_A, off, off in_A, in_B, off in_A, out_B, off out_A, off, off out_A, in_B, off in_B, off, off in_B, in_A, off in_B, out_A, off out_B, off, off out_B, in_A, off off, off, in_A off, out_A, in_A off, in_B, in_A off, out_B, in_A out_A, off, in_A out_A, in_B, in_A in_B, off, in_A in_B, out_A, in_A out_B, off, in_A off, off, out_A off, in_A, out_A off, in_B, out_A off, out_B, out_A in_A, off, out_A in_A, in_B, out_A in_A, out_B, out_A in_B, off, out_A in_B, in_A, out_A out_B, off, out_A out_B, in_A, out_A off, off, in_B off, in_A, in_B off, out_A, in_B off, out_B, in_B in_A, off, in_B in_A, out_B, in_B out_A, off, in_B out_B, off, in_B out_B, in_A, in_B off, off, out_B off, in_A, out_B off, out_A, out_B off, in_B, out_B in_A, off, out_B in_A, in_B, out_B out_A, off, out_B out_A, in_B, out_B in_B, off, out_B in_B, in_A, out_B in_B, out_A, out_B Tested with oscilloscope, 1PPS generator and ts2phc. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Ashish K <ashishx.k@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forwardVadim Fedorenko2-24/+19
Consolidate IPv4 MTU code the same way it is done in IPv6 to have code aligned in both address families Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: ipv6: introduce ip6_dst_mtu_maybe_forwardVadim Fedorenko4-23/+6
Replace ip6_dst_mtu_forward with ip6_dst_mtu_maybe_forward and reuse this code in ip6_mtu. Actually these two functions were almost duplicates, this change will simplify the maintaince of mtu calculation code. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21Merge branch 'ipv6-ioam'David S. Miller27-1/+2393
Justin Iurman says: ==================== Support for the IOAM Pre-allocated Trace with IPv6 v5: - Refine types, min/max and default values for new sysctls - Introduce a "_wide" sysctl for each "ioam6_id" sysctl - Add more validation on headers before processing data - RCU for sc <> ns pointers + appropriate accessors - Generic Netlink policies are now per op, not per family anymore - Address other comments/remarks from Jakub (thanks again) - Revert "__packed" to "__attribute__((packed))" for uapi headers - Add tests to cover the functionality added, as requested by David Ahern v4: - Address warnings from checkpatch (ignore errors related to unnamed bitfields in the first patch) - Use of hweight32 (thanks Jakub) - Remove inline keyword from static functions in C files and let the compiler decide what to do (thanks Jakub) v3: - Fix warning "unused label 'out_unregister_genl'" by adding conditional macro - Fix lwtunnel output redirect bug: dst cache useless in this case, use orig_output instead v2: - Fix warning with static for __ioam6_fill_trace_data - Fix sparse warning with __force when casting __be64 to __be32 - Fix unchecked dereference when removing IOAM namespaces or schemas - exthdrs.c: Don't drop by default (now: ignore) to match the act bits "00" - Add control plane support for the inline insertion (lwtunnel) - Provide uapi structures - Use __net_timestamp if skb->tstamp is empty - Add note about the temporary IANA allocation - Remove support for "removable" TLVs - Remove support for virtual/anonymous tunnel decapsulation In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in a packet while it traverses a path between two points in an IOAM domain. It is defined in draft-ietf-ippm-ioam-data [1]. IOAM data fields can be encapsulated into a variety of protocols. The IPv6 encapsulation is defined in draft-ietf-ippm-ioam-ipv6-options [2], via extension headers. IOAM can be used to complement OAM mechanisms based on e.g. ICMP or other types of probe packets. This patchset implements support for the Pre-allocated Trace, carried by a Hop-by-Hop. Therefore, a new IPv6 Hop-by-Hop TLV option is introduced, see IANA [3]. The three other IOAM options are not included in this patchset (Incremental Trace, Proof-of-Transit and Edge-to-Edge). The main idea behind the IOAM Pre-allocated Trace is that a node pre-allocates some room in packets for IOAM data. Then, each IOAM node on the path will insert its data. There exist several interesting use- cases, e.g. Fast failure detection/isolation or Smart service selection. Another killer use-case is what we have called Cross-Layer Telemetry, see the demo video on its repository [4], that aims to make the entire stack (L2/L3 -> L7) visible for distributed tracing tools (e.g. Jaeger), instead of the current L5 -> L7 limited view. So, basically, this is a nice feature for the Linux Kernel. This patchset also provides support for the control plane part, but only for the inline insertion (host-to-host use case), through lightweight tunnels. Indeed, for in-transit traffic, the solution is to have an IPv6-in-IPv6 encapsulation, which brings some difficulties and still requires a little bit of work and discussion (ie anonymous tunnel decapsulation and multi egress resolution). - Patch 1: IPv6 IOAM headers definition - Patch 2: Data plane support for Pre-allocated Trace - Patch 3: IOAM Generic Netlink API - Patch 4: Support for IOAM injection with lwtunnels - Patch 5: Documentation for new IOAM sysctls - Patch 6: Test for the IOAM insertion with IPv6 [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 [4] https://github.com/iurmanj/cross-layer-telemetry ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21selftests: net: Test for the IOAM insertion with IPv6Justin Iurman4-0/+702
This test evaluates the IOAM insertion for IPv6 by checking the IOAM data integrity on the receiver. The topology is formed by 3 nodes: Alpha (sender), Beta (router in-between) and Gamma (receiver). An IOAM domain is configured from Alpha to Gamma only, which means not on the reverse path. When Gamma is the destination, Alpha adds an IOAM option (Pre-allocated Trace) inside a Hop-by-hop and fills the trace with its own IOAM data. Beta and Gamma also fill the trace. The IOAM data integrity is checked on Gamma, by comparing with the pre-defined IOAM configuration (see below). +-------------------+ +-------------------+ | | | | | alpha netns | | gamma netns | | | | | | +-------------+ | | +-------------+ | | | veth0 | | | | veth0 | | | | db01::2/64 | | | | db02::2/64 | | | +-------------+ | | +-------------+ | | . | | . | +-------------------+ +-------------------+ . . . . . . +----------------------------------------------------+ | . . | | +-------------+ +-------------+ | | | veth0 | | veth1 | | | | db01::1/64 | ................ | db02::1/64 | | | +-------------+ +-------------+ | | | | beta netns | | | +--------------------------+-------------------------+ ~~~~~~~~~~~~~~~~~~~~~~ | IOAM configuration | ~~~~~~~~~~~~~~~~~~~~~~ Alpha +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 1 | +-----------------------------------------------------------+ | Node Wide ID | 11111111 | +-----------------------------------------------------------+ | Ingress ID | 0xffff (default value) | +-----------------------------------------------------------+ | Ingress Wide ID | 0xffffffff (default value) | +-----------------------------------------------------------+ | Egress ID | 101 | +-----------------------------------------------------------+ | Egress Wide ID | 101101 | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee0 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf00dc0de | +-----------------------------------------------------------+ | Schema ID | 777 | +-----------------------------------------------------------+ | Schema Data | something that will be 4n-aligned | +-----------------------------------------------------------+ Note: When Gamma is the destination, Alpha adds an IOAM Pre-allocated Trace option inside a Hop-by-hop, where 164 bytes are pre-allocated for the trace, with 123 as the IOAM-Namespace and with 0xfff00200 as the trace type (= all available options at this time). As a result, and based on IOAM configurations here, only both Alpha and Beta should be capable of inserting their IOAM data while Gamma won't have enough space and will set the overflow bit. Beta +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 2 | +-----------------------------------------------------------+ | Node Wide ID | 22222222 | +-----------------------------------------------------------+ | Ingress ID | 201 | +-----------------------------------------------------------+ | Ingress Wide ID | 201201 | +-----------------------------------------------------------+ | Egress ID | 202 | +-----------------------------------------------------------+ | Egress Wide ID | 202202 | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee1 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf11dc0de | +-----------------------------------------------------------+ | Schema ID | 0xffffff (= None) | +-----------------------------------------------------------+ | Schema Data | | +-----------------------------------------------------------+ Gamma +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 3 | +-----------------------------------------------------------+ | Node Wide ID | 33333333 | +-----------------------------------------------------------+ | Ingress ID | 301 | +-----------------------------------------------------------+ | Ingress Wide ID | 301301 | +-----------------------------------------------------------+ | Egress ID | 0xffff (default value) | +-----------------------------------------------------------+ | Egress Wide ID | 0xffffffff (default value) | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee2 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf22dc0de | +-----------------------------------------------------------+ | Schema ID | 0xffffff (= None) | +-----------------------------------------------------------+ | Schema Data | | +-----------------------------------------------------------+ Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Documentation for new IOAM sysctlsJustin Iurman2-0/+43
Add documentation for new IOAM sysctls: - ioam6_id and ioam6_id_wide: two per-namespace sysctls - ioam6_enabled, ioam6_id and ioam6_id_wide: three per-interface sysctls Example of IOAM configuration based on the following simple topology: _____ _____ _____ | | eth0 eth0 | | eth1 eth0 | | | A |.----------.| B |.----------.| C | |_____| |_____| |_____| 1) Node and interface IDs can be configured for IOAM: # IOAM ID of A = 1, IOAM ID of A.eth0 = 11 (A) sysctl -w net.ipv6.ioam6_id=1 (A) sysctl -w net.ipv6.conf.eth0.ioam6_id=11 # IOAM ID of B = 2, IOAM ID of B.eth0 = 21, IOAM ID of B.eth1 = 22 (B) sysctl -w net.ipv6.ioam6_id=2 (B) sysctl -w net.ipv6.conf.eth0.ioam6_id=21 (B) sysctl -w net.ipv6.conf.eth1.ioam6_id=22 # IOAM ID of C = 3, IOAM ID of C.eth0 = 31 (C) sysctl -w net.ipv6.ioam6_id=3 (C) sysctl -w net.ipv6.conf.eth0.ioam6_id=31 Note that "_wide" IDs equivalents can be configured the same way. 2) Each node can be configured to form an IOAM domain. For instance, we allow IOAM from A to C only (not the reverse path), i.e. enable IOAM on ingress for B.eth0 and C.eth0: (B) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1 (C) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1 3) An IOAM domain (e.g. ID=123) is defined and made known to each node: (A) ip ioam namespace add 123 (B) ip ioam namespace add 123 (C) ip ioam namespace add 123 4) Finally, an IOAM Pre-allocated Trace can be inserted in traffic sent by A when C (e.g. db02::2) is the destination: (A) ip -6 route add db02::2/128 encap ioam6 trace type 0x800000 ns 123 size 12 dev eth0 Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Support for IOAM injection with lwtunnelsJustin Iurman10-12/+358
Add support for the IOAM inline insertion (only for the host-to-host use case) which is per-route configured with lightweight tunnels. The target is iproute2 and the patch is ready. It will be posted as soon as this patchset is merged. Here is an overview: $ ip -6 ro ad fc00::1/128 encap ioam6 trace type 0x800000 ns 1 size 12 dev eth0 This example configures an IOAM Pre-allocated Trace option attached to the fc00::1/128 prefix. The IOAM namespace (ns) is 1, the size of the pre-allocated trace data block is 12 octets (size) and only the first IOAM data (bit 0: hop_limit + node id) is included in the trace (type) represented as a bitfield. The reason why the in-transit (IPv6-in-IPv6 encapsulation) use case is not implemented is explained on the patchset cover. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: IOAM Generic Netlink APIJustin Iurman3-2/+624
Add Generic Netlink commands to allow userspace to configure IOAM namespaces and schemas. The target is iproute2 and the patch is ready. It will be posted as soon as this patchset is merged. Here is an overview: $ ip ioam Usage: ip ioam { COMMAND | help } ip ioam namespace show ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ] ip ioam namespace del ID ip ioam schema show ip ioam schema add ID DATA ip ioam schema del ID ip ioam namespace set ID schema { ID | none } Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Data plane support for Pre-allocated TraceJustin Iurman13-1/+557
Implement support for processing the IOAM Pre-allocated Trace with IPv6, see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3]. A new per-interface sysctl is introduced. The value is a boolean to accept (=1) or ignore (=0, by default) IPv6 IOAM options on ingress for an interface: - net.ipv6.conf.XXX.ioam6_enabled Two other sysctls are introduced to define IOAM IDs, represented by an integer. They are respectively per-namespace and per-interface: - net.ipv6.ioam6_id - net.ipv6.conf.XXX.ioam6_id The value of the first one represents the IOAM ID of the node itself (u32; max and default value = U32_MAX>>8, due to hop limit concatenation) while the other represents the IOAM ID of an interface (u16; max and default value = U16_MAX). Each "ioam6_id" sysctl has a "_wide" equivalent: - net.ipv6.ioam6_id_wide - net.ipv6.conf.XXX.ioam6_id_wide The value of the first one represents the wide IOAM ID of the node itself (u64; max and default value = U64_MAX>>8, due to hop limit concatenation) while the other represents the wide IOAM ID of an interface (u32; max and default value = U32_MAX). The use of short and wide equivalents is not exclusive, a deployment could choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format) could be an identifier for a physical interface, whereas net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a logical sub-interface. Documentation about new sysctls is provided at the end of this patchset. Two relativistic hash tables are used: one for IOAM namespaces, the other for IOAM schemas. A namespace can only have a single active schema and a schema can only be attached to a single namespace (1:1 relationship). [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21uapi: IPv6 IOAM headers definitionJustin Iurman1-0/+123
This patch provides the IPv6 IOAM option header [1] as well as the IOAM Trace header [2]. An IOAM option must be 4n-aligned. Here is an overview of a Hop-by-Hop with an IOAM Trace option: +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next header | Hdr Ext Len | Padding | Padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Option Type | Opt Data Len | Reserved | IOAM Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Namespace-ID | NodeLen | Flags | RemainingLen| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IOAM-Trace-Type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+ | | | | node data [n] | | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ D | | a | node data [n-1] | t | | a +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ~ ... ~ S +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ p | | a | node data [1] | c | | e +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | | node data [0] | | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+ The IOAM option header starts at "Option Type" and ends after "IOAM Type". The IOAM Trace header starts at "Namespace-ID" and ends after "IOAM-Trace-Type/Reserved". IOAM Type: either Pre-allocated Trace (=0), Incremental Trace (=1), Proof-of-Transit (=2) or Edge-to-Edge (=3). Note that both the Pre-allocated Trace and the Incremental Trace look the same. The two others are not implemented. Namespace-ID: IOAM namespace identifier, not to be confused with network namespaces. It adds further context to IOAM options and associated data, and allows devices which are IOAM capable to determine whether IOAM options must be processed or ignored. It can also be used by an operator to distinguish different operational domains or to identify different sets of devices. NodeLen: Length of data added by each node. It depends on the Trace Type. Flags: Only the Overflow (O) flag for now. The O flag is set by a transit node when there are not enough octets left to record its data. RemainingLen: Remaining free space to record data. IOAM-Trace-Type: Bit field where each bit corresponds to a specific kind of IOAM data. See [2] for a detailed list. [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: switchdev: recurse into __switchdev_handle_fdb_del_to_deviceVladimir Oltean1-4/+4
The difference between __switchdev_handle_fdb_del_to_device and switchdev_handle_del_to_device is that the former takes an extra orig_dev argument, while the latter starts with dev == orig_dev. We should recurse into the variant that does not lose the orig_dev along the way. This is relevant when deleting FDB entries pointing towards a bridge (dev changes to the lower interfaces, but orig_dev shouldn't). The addition helper already recurses properly, just the deletion one doesn't. Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: switchdev: remove stray semicolon in switchdev_handle_fdb_del_to_device ↵Vladimir Oltean1-1/+1
shim With the semicolon at the end, the compiler sees the shim function as a declaration and not as a definition, and warns: 'switchdev_handle_fdb_del_to_device' declared 'static' but never defined Reported-by: kernel test robot <lkp@intel.com> Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: phy: at803x: finish the phy id checking simplificationVladimir Oltean1-1/+1
The blamed commit was probably not tested on net-next, since it did not refactor the extra phy id check introduced in commit b856150c8098 ("net: phy: at803x: mask 1000 Base-X link mode"). Fixes: 8887ca5474bd ("net: phy: at803x: simplify custom phy id matching") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: phylink: cleanup ksettings_setRussell King (Oracle)1-7/+9
We only need to fiddle about with the supported mask after we have validated the user's requested parameters. Simplify and streamline the code by moving the linkmode copy and update of the autoneg bit after validating the user's request. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch '1GbE' of ↵David S. Miller11-186/+262
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-07-20 This series contains updates to e1000e and igc drivers. Sasha adds initial S0ix support for devices with CSME and adds polling for exiting of DPG. He sets the PHY to low power idle when in S0ix. He also adds support for new device IDs for and adds a space to debug messaging to help with readability for e1000e. For igc, he ensures that q_vector array is not accessed beyond its bounds and removes unneeded PHY related checks. Tree Davies corrects a spelling mistake in e1000e. Muhammad corrects the value written when there is no TSN offloading and adjusts timeout value to avoid possible Tx hang for igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20arm64: dts: imx8mp: change interrupt order per dt-bindingJoakim Zhang1-3/+3
This patch changs interrupt order which found by dtbs_check. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we should list interrupt in it's order. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yamlJoakim Zhang2-56/+93
In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: snps,dwmac: add missing DWMAC IP versionJoakim Zhang1-0/+3
Add missing DWMAC IP version in snps,dwmac.yaml which found by below command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml: ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20igc: Increase timeout value for Speed 100/1000/2500Muhammad Husaini Zulkifli1-1/+3
As the cycle time is set to maximum of 1s, the TX Hang timeout need to be increase to avoid possible TX Hang. There is no dedicated number specific in data sheet for the timeout factor. Timeout factor was determined during the debugging to solve the "Tx Hang" issues that happen in some cases mainly during ETF(Earliest TxTime First). This can be test by using TSN Schedule Tx Tools udp_tai sample application. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Set QBVCYCLET_S to 0 for TSN Basic SchedulingMuhammad Husaini Zulkifli1-1/+1
According to datasheet section 8.12.19, when there's no TSN offloading Shadow_QbvCycle bit[29:0] must be set to zero for basic scheduling. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove phy->type checkingSasha Neftin1-11/+4
i225 devices have only one phy->type: copper. There is no point checking phy->type during the igc_has_link method from the watchdog that invoked every 2 seconds. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove _I_PHY_ID checkingSasha Neftin3-15/+4
i225 devices have only one PHY vendor. There is no point checking _I_PHY_ID during the link establishment and auto-negotiation process. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Check if num of q_vectors is smaller than max before array accessSasha Neftin1-1/+8
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20net/e1000e: Fix spelling mistake "The" -> "This"Tree Davies1-1/+1
There is a spelling mistake in the comment block. Signed-off-by: Tree Davies <tdavies@darkphysics.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add space to the debug printSasha Neftin1-2/+4
Minor fixes to allow debug prints more readable. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for the next LOM generationSasha Neftin2-0/+8
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for Lunar LakeSasha Neftin5-0/+21
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Lunar Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Additional PHY power saving in S0ixSasha Neftin1-0/+6
After transferring the MAC-PHY interface to the SMBus set the PHY to S0ix low power idle mode. Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add polling mechanism to indicate CSME DPG exitSasha Neftin3-0/+26
Per guidance from the CSME architecture team, it may take up to 1 second for unconfiguring dynamic power gating mode. Practically it can take more time. Wait up to 2.5 seconds to indicate dynamic power gating exit from the S0ix configuration. Detect scenarios that take more than 1 second but less than 2.5 seconds will emit warning message. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add handshake with the CSME to support S0ixSasha Neftin2-154/+176
On the corporate system, the driver will ask from the CSME (manageability engine) to perform device settings are required to allow S0ix residency. This patch provides initial support. Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20net: phy: at803x: simplify custom phy id matchingRussell King1-11/+5
The at803x driver contains a function, at803x_match_phy_id(), which tests whether the PHY ID matches the value passed, comparing phy_id with phydev->phy_id and testing all bits that in the driver's mask. This is the same test that is used to match the driver, with phy_id replaced with the driver specified ID, phydev->drv->phy_id. Hence, we already know the value of the bits being tested if we look at phydev->drv->phy_id directly, and we do not require a complicated test to check them. Test directly against phydev->drv->phy_id instead. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: marvell: clean up trigraph warning on ??! stringColin Ian King1-1/+1
The character sequence ??! is a trigraph and causes the following clang warning: drivers/net/ethernet/marvell/mvneta.c:2604:39: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20atm: idt77252: clean up trigraph warning on ??) stringColin Ian King1-1/+1
The character sequence ??) is a trigraph and causes the following clang warning: drivers/atm/idt77252.c:3544:35: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: phy: intel-xway: Add RGMII internal delay configurationMartin Schiller1-0/+76
This adds the possibility to configure the RGMII RX/TX clock skew via devicetree. Simply set phy mode to "rgmii-id", "rgmii-rxid" or "rgmii-txid" and add the "rx-internal-delay-ps" or "tx-internal-delay-ps" property to the devicetree. Furthermore, a warning is now issued if the phy mode is configured to "rgmii" and an internal delay is set in the phy (e.g. by pin-strapping), as in the dp83867 driver. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: phylink: add phy change pause mode debugRussell King (Oracle)1-2/+3
Augment the phy link debug prints with the pause state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvpp2: deny disabling autoneg for 802.3z modesRussell King (Oracle)1-0/+9
The documentation for Armada 8040 says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvpp2 hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvneta: deny disabling autoneg for 802.3z modesRussell King (Oracle)1-6/+14
The documentation for Armada 38x says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvneta hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000002000 # 1000BASE-X Pause # ethtool -s ethX advertise 0xa000 # 2500BASE-X Pause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: ipv4: add capability check for net administrationYang Yang1-3/+7
Root in init user namespace can modify /proc/sys/net/ipv4/ip_forward without CAP_NET_ADMIN, this doesn't follow the principle of capabilities. For example, let's take a look at netdev_store(), root can't modify netdev attribute without CAP_NET_ADMIN. So let's keep the consistency of permission check logic. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch 'qcom-dts-updates'David S. Miller3-8/+58
Alex Elder says: ==================== arm64: dts: qcom: DTS updates This series updates some IPA-related DT nodes. Newer versions of IPA do not require an interconnect between IPA and SoC internal memory. The first patch updates the DT binding to reflect this. The second patch adds IPA information to "sc7280.dtsi", using only two interconnects. It includes the definition of the reserved memory area used to hold IPA firmware. The last patch defines the reserved IPA firmware memory area in "sc7180.dtsi". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20arm64: dts: qcom: sc7180: define ipa_fw_mem nodeAlex Elder1-0/+5
Define the reserved memory space used for IPA firmware for the Qualcomm SC7180 SoC. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20arm64: dts: qcom: sc7280: add IPA informationAlex Elder1-0/+43
Add IPA-related nodes and definitions to "sc7280.dtsi", including the reserved memory area used for AP-based IPA firmware loading. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: qcom,ipa: make imem interconnect optionalAlex Elder1-8/+10
On some newer SoCs, the interconnect between IPA and SoC internal memory (imem) is not used. Reflect this in the binding by moving the definition of the "imem" interconnect to the end and defining minItems to be 2 for both the interconnects and interconnect-names properties. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: ipa: fix IPA v4.11 interconnect dataAlex Elder1-9/+4
Currently three interconnects are defined for the Qualcomm SC7280 SoC, but this was based on a misunderstanding. There should only be two interconnects defined: one between the IPA and system memory; and another between the AP and IPA config space. The bandwidths defined for the memory and config interconnects do not match what I understand to be proper values, so update these. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: fec: Fix indentationFabio Estevam1-5/+5
The following warning is observed when running 'make dtbs_check': Documentation/devicetree/bindings/net/fsl,fec.yaml:85:7: [warning] wrong indentation: expected 8 but found 6 (indentation) Fix the indentation accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch 'fdb-fanout'David S. Miller4-105/+365
Vladimir Oltean says: ==================== Fan out FDB entries pointing towards the bridge to all switchdev member ports The "DSA RX filtering" series has added some important support for interpreting addresses towards the bridge device as host addresses and installing them as FDB entries towards the CPU port, but it does not cover all circumstances and needs further work. To be precise, the mechanism introduced in that series only works as long as the ports are fairly static and no port joins or leaves the bridge once the configuration is done. If any port leaves, host FDB entries that were installed during runtime (for example the user changes the MAC address of the bridge device) will be prematurely deleted, resulting in a broken setup. I see this work as targeted for "net-next" because technically it was not supposed to work. Also, there are still corner cases and holes to be plugged. For example, today, FDB entries on foreign interfaces are not covered by br_fdb_replay(), which means that there are cases where some host addresses are either lost, or never deleted by DSA. That will be resolved once more work gets accepted, in particular the "Allow forwarding for the software bridge data path to be offloaded to capable devices" series, which moves the br_fdb_replay() call to the bridge core and therefore would be required to solve the problem in a generic way for every switchdev driver and not just for DSA. These patches also pave the way for a cleaner implementation for FDB entries pointing towards a LAG upper interface in DSA (that code needs only to be added, nothing changed), however this is not done here. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: dsa: use switchdev_handle_fdb_{add,del}_to_deviceVladimir Oltean2-105/+113
Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICEVladimir Oltean2-0/+246
Currently DSA has an issue with FDB entries pointing towards the bridge in the presence of br_fdb_replay() being called at port join and leave time. In particular, each bridge port will ask for a replay for the FDB entries pointing towards the bridge when it joins, and for another replay when it leaves. This means that for example, a bridge with 4 switch ports will notify DSA 4 times of the bridge MAC address. But if the MAC address of the bridge changes during the normal runtime of the system, the bridge notifies switchdev [ once ] of the deletion of the old MAC address as a local FDB towards the bridge, and of the insertion [ again once ] of the new MAC address as a local FDB. This is a problem, because DSA keeps the old MAC address as a host FDB entry with refcount 4 (4 ports asked for it using br_fdb_replay). So the old MAC address will not be deleted. Additionally, the new MAC address will only be installed with refcount 1, and when the first switch port leaves the bridge (leaving 3 others as still members), it will delete with it the new MAC address of the bridge from the local FDB entries kept by DSA (because the br_fdb_replay call on deletion will bring the entry's refcount from 1 to 0). So the problem, really, is that the number of br_fdb_replay() calls is not matched with the refcount that a host FDB is offloaded to DSA during normal runtime. An elegant way to solve the problem would be to make the switchdev notification emitted by br_fdb_change_mac_address() result in a host FDB kept by DSA which has a refcount exactly equal to the number of ports under that bridge. Then, no matter how many DSA ports join or leave that bridge, the host FDB entry will always be deleted when there are exactly zero remaining DSA switch ports members of the bridge. To implement the proposed solution, we remember that the switchdev objects and port attributes have some helpers provided by switchdev, which can be optionally called by drivers: switchdev_handle_port_obj_{add,del} and switchdev_handle_port_attr_set. These helpers: - fan out a switchdev object/attribute emitted for the bridge towards all the lower interfaces that pass the check_cb(). - fan out a switchdev object/attribute emitted for a bridge port that is a LAG towards all the lower interfaces that pass the check_cb(). In other words, this is the model we need for the FDB events too: something that will keep an FDB entry emitted towards a physical port as it is, but translate an FDB entry emitted towards the bridge into N FDB entries, one per physical port. Of course, there are many differences between fanning out a switchdev object (VLAN) on 3 lower interfaces of a LAG and fanning out an FDB entry on 3 lower interfaces of a LAG. Intuitively, an FDB entry towards a LAG should be treated specially, because FDB entries are unicast, we can't just install the same address towards 3 destinations. It is imaginable that drivers might want to treat this case specifically, so create some methods for this case and do not recurse into the LAG lower ports, just the bridge ports. DSA also listens for FDB entries on "foreign" interfaces, aka interfaces bridged with us which are not part of our hardware domain: think an Ethernet switch bridged with a Wi-Fi AP. For those addresses, DSA installs host FDB entries. However, there we have the same problem (those host FDB entries are installed with a refcount of only 1) and an even bigger one which we did not have with FDB entries towards the bridge: br_fdb_replay() is currently not called for FDB entries on foreign interfaces, just for the physical port and for the bridge itself. So when DSA sniffs an address learned by the software bridge towards a foreign interface like an e1000 port, and then that e1000 leaves the bridge, DSA remains with the dangling host FDB address. That will be fixed separately by replaying all FDB entries and not just the ones towards the port and the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: switchdev: introduce helper for checking dynamically learned FDB entriesVladimir Oltean2-1/+7
It is a bit difficult to understand what DSA checks when it tries to avoid installing dynamically learned addresses on foreign interfaces as local host addresses, so create a generic switchdev helper that can be reused and is generally more readable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.