aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when ↵Lad Prabhakar1-3/+3
fully ready Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/[email protected] Reported-by: Pavel Machek <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Pavel Machek <[email protected]> Reviewed-by: Ulrich Hecht <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-25ucounts: Fix systemd LimitNPROC with private users regressionEric W. Biederman1-1/+13
Long story short recursively enforcing RLIMIT_NPROC when it is not enforced on the process that creates a new user namespace, causes currently working code to fail. There is no reason to enforce RLIMIT_NPROC recursively when we don't enforce it normally so update the code to detect this case. I would like to simply use capable(CAP_SYS_RESOURCE) to detect when RLIMIT_NPROC is not enforced upon the caller. Unfortunately because RLIMIT_NPROC is charged and checked for enforcement based upon the real uid, using capable() which is euid based is inconsistent with reality. Come as close as possible to testing for capable(CAP_SYS_RESOURCE) by testing for when the real uid would match the conditions when CAP_SYS_RESOURCE would be present if the real uid was the effective uid. Reported-by: Etienne Dechamps <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215596 Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Reviewed-by: Kees Cook <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]>
2022-02-25Merge tag 'soc-fsl-fix-v5.17' of ↵Arnd Bergmann11-15/+26
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL SoC driver fixes for v5.17 - Add missing SoC compatible in existing binding - Replace kernel.h with the necessary inclusions - MAINTAINERS file fixes - Fix memory allocation failure check in guts driver - Various cleanups and minor fixes * tag 'soc-fsl-fix-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: Check of ioremap return value soc: fsl: qe: fix typo in a comment soc: fsl: guts: Add a missing memory allocation failure check soc: fsl: guts: Revert commit 3c0d64e867ed soc: fsl: Correct MAINTAINERS database (SOC) soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY) soc: fsl: Replace kernel.h with the necessary inclusions dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a dt-bindings: qoriq-clock: add missing compatible for lx2160a Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-25KVM: x86: Yield to IPI target vCPU only if it is busyLi RongQing1-1/+1
When sending a call-function IPI-many to vCPUs, yield to the IPI target vCPU which is marked as preempted. but when emulating HLT, an idling vCPU will be voluntarily scheduled out and mark as preempted from the guest kernel perspective. yielding to idle vCPU is pointless and increase unnecessary vmexit, maybe miss the true preempted vCPU so yield to IPI target vCPU only if vCPU is busy and preempted Signed-off-by: Li RongQing <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64Dexuan Cui1-1/+1
When Linux runs as an Isolated VM on Hyper-V, it supports AMD SEV-SNP but it's partially enlightened, i.e. cc_platform_has( CC_ATTR_GUEST_MEM_ENCRYPT) is true but sev_active() is false. Commit 4d96f9109109 per se is good, but with it now kvm_setup_vsyscall_timeinfo() -> kvmclock_init_mem() calls set_memory_decrypted(), and later gets stuck when trying to zere out the pages pointed by 'hvclock_mem', if Linux runs as an Isolated VM on Hyper-V. The cause is that here now the Linux VM should no longer access the original guest physical addrss (GPA); instead the VM should do memremap() and access the original GPA + ms_hyperv.shared_gpa_boundary: see the example code in drivers/hv/connection.c: vmbus_connect() or drivers/hv/ring_buffer.c: hv_ringbuffer_init(). If the VM tries to access the original GPA, it keepts getting injected a fault by Hyper-V and gets stuck there. Here the issue happens only when the VM has >=65 vCPUs, because the global static array hv_clock_boot[] can hold 64 "struct pvclock_vsyscall_time_info" (the sizeof of the struct is 64 bytes), so kvmclock_init_mem() only allocates memory in the case of vCPUs > 64. Since the 'hvclock_mem' pages are only useful when the kvm clock is supported by the underlying hypervisor, fix the issue by returning early when Linux VM runs on Hyper-V, which doesn't support kvm clock. Fixes: 4d96f9109109 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()") Tested-by: Andrea Parri (Microsoft) <[email protected]> Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Signed-off-by: Dexuan Cui <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25x86/kvm: Don't waste memory if kvmclock is disabledWanpeng Li1-0/+3
Even if "no-kvmclock" is passed in cmdline parameter, the guest kernel still allocates hvclock_mem which is scaled by the number of vCPUs, let's check kvmclock enable in advance to avoid this memory waste. Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25x86/kvm: Don't use PV TLB/yield when mwait is advertisedWanpeng Li1-0/+2
MWAIT is advertised in host is not overcommitted scenario, however, PV TLB/sched yield should be enabled in host overcommitted scenario. Let's add the MWAIT checking when enabling PV TLB/sched yield. Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25Merge tag 'kvmarm-fixes-5.17-4' of ↵Paolo Bonzini4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #4 - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available
2022-02-25KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3Mark Brown3-2/+13
The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Tested-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-25net: sparx5: Fix add vlan when invalid operationCasper Andersson1-10/+10
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33bb68b ("net: sparx5: add vlan support") Signed-off-by: Casper Andersson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25net: chelsio: cxgb3: check the return value of pci_find_capability()Jia-Ju Bai1-0/+2
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25Merge branch 'ibmvnic-fixes'David S. Miller2-28/+156
Sukadev Bhattiprolu says: ==================== ibmvnic: Fix a race in ibmvnic_probe() If we get a transport (reset) event right after a successful CRQ_INIT during ibmvnic_probe() but before we set the adapter state to VNIC_PROBED, we will throw away the reset assuming that the adapter is still in the probing state. But since the adapter has completed the CRQ_INIT any subsequent CRQs the we send will be ignored by the vnicserver until we release/init the CRQ again. This can leave the adapter unconfigured. While here fix a couple of other bugs that were observed (Patches 1,2,4). ==================== Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: Allow queueing resets during probeSukadev Bhattiprolu2-10/+98
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e99f9c ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: clear fop when retrying probeSukadev Bhattiprolu1-0/+5
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: init init_done_rc earlierSukadev Bhattiprolu1-5/+21
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: register netdev after init of adapterSukadev Bhattiprolu1-6/+8
Finish initializing the adapter before registering netdev so state is consistent. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: complete init_done on transport eventsSukadev Bhattiprolu1-0/+7
If we get a transport event, set the error and mark the init as complete so the attempt to send crq-init or login fail sooner rather than wait for the timeout. Fixes: bbd669a868bb ("ibmvnic: Fix completion structure initialization") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: define flush_reset_queue helperSukadev Bhattiprolu1-8/+16
Define and use a helper to flush the reset queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: initialize rc before completing waitSukadev Bhattiprolu1-1/+1
We should initialize ->init_done_rc before calling complete(). Otherwise the waiting thread may see ->init_done_rc as 0 before we have updated it and may assume that the CRQ was successful. Fixes: 6b278c0cb378 ("ibmvnic delay complete()") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: free reset-work-item when flushingSukadev Bhattiprolu1-1/+3
Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25Merge branch 'master' of ↵David S. Miller11-35/+51
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix PMTU for IPv6 if the reported MTU minus the ESP overhead is smaller than 1280. From Jiri Bohac. 2) Fix xfrm interface ID and inter address family tunneling when migrating xfrm states. From Yan Yan. 3) Add missing xfrm intrerface ID initialization on xfrmi_changelink. From Antony Antony. 4) Enforce validity of xfrm offload input flags so that userspace can't send undefined flags to the offload driver. From Leon Romanovsky. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-02-25net: dcb: flush lingering app table entries for unregistered devicesVladimir Oltean1-0/+44
If I'm not mistaken (and I don't think I am), the way in which the dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates the application table with dynamically allocated struct dcb_app_type entries that are kept in the module-global dcb_app_list. However, nobody keeps exact track of these entries, and although dcb_ieee_delapp() is supposed to remove them, nobody does so when the interface goes away (example: driver unbinds from device). So the dcb_app_list will contain lingering entries with an ifindex that no longer matches any device in dcb_app_lookup(). Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and flushing the app table entries of interfaces that are now gone. In fact something like this used to be done as part of the initial commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(), essentially at module_exit time. That became dead code after commit 7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged "tristate config DCB" and "bool config DCBNL" into a single "bool config DCB", so net/dcb/dcbnl.c could not be built as a module anymore. Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular") recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether, leaving us with the version we have today. Since flushing application table entries can and should be done as soon as the netdevice disappears, fundamentally the commit that is to blame is the one that introduced the design of this API. Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25net/smc: fix connection leakD. Wythe1-2/+8
There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable. Fixes: 39f41f367b08 ("net/smc: common release code for non-accepted sockets") Signed-off-by: D. Wythe <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25net: stmmac: only enable DMA interrupts when readyVincent Whitchurch1-2/+26
In this driver's ->ndo_open() callback, it enables DMA interrupts, starts the DMA channels, then requests interrupts with request_irq(), and then finally enables napi. If RX DMA interrupts are received before napi is enabled, no processing is done because napi_schedule_prep() will return false. If the network has a lot of broadcast/multicast traffic, then the RX ring could fill up completely before napi is enabled. When this happens, no further RX interrupts will be delivered, and the driver will fail to receive any packets. Fix this by only enabling DMA interrupts after all other initialization is complete. Fixes: 523f11b5d4fd72efb ("net: stmmac: move hardware setup for stmmac_open to new function") Reported-by: Lars Persson <[email protected]> Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25xen/netfront: destroy queues before real_num_tx_queues is zeroedMarek Marczykowski-Górecki1-16/+23
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path") Cc: [email protected] Signed-off-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25Merge tag 'omap-for-v5.17/fixes-signed' of ↵Arnd Bergmann3-35/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps Fixes for devkit8000 timer regression. Similar to the earlier beagleboard fixes, we must not configure the clocksource drivers to use an alternative timer configuration. It causes unnecessary issues with power management. Only some old designs based on early beagleboard revisions with a miswired timer need to use the alternative timer. * tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use 32KiHz oscillator on devkit8000 ARM: dts: switch timer config to common devkit8000 devicetree Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"Sean Christopherson2-11/+21
Revert back to refreshing vmcs.HOST_CR3 immediately prior to VM-Enter. The PCID (ASID) part of CR3 can be bumped without KVM being scheduled out, as the kernel will switch CR3 during __text_poke(), e.g. in response to a static key toggling. If switch_mm_irqs_off() chooses a new ASID for the mm associate with KVM, KVM will do VM-Enter => VM-Exit with a stale vmcs.HOST_CR3. Add a comment to explain why KVM must wait until VM-Enter is imminent to refresh vmcs.HOST_CR3. The following splat was captured by stashing vmcs.HOST_CR3 in kvm_vcpu and adding a WARN in load_new_mm_cr3() to fire if a new ASID is being loaded for the KVM-associated mm while KVM has a "running" vCPU: static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) { struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); ... WARN(vcpu && (vcpu->cr3 & GENMASK(11, 0)) != (new_mm_cr3 & GENMASK(11, 0)) && (vcpu->cr3 & PHYSICAL_PAGE_MASK) == (new_mm_cr3 & PHYSICAL_PAGE_MASK), "KVM is hosed, loading CR3 = %lx, vmcs.HOST_CR3 = %lx", new_mm_cr3, vcpu->cr3); } ------------[ cut here ]------------ KVM is hosed, loading CR3 = 8000000105393004, vmcs.HOST_CR3 = 105393003 WARNING: CPU: 4 PID: 20717 at arch/x86/mm/tlb.c:291 load_new_mm_cr3+0x82/0xe0 Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel CPU: 4 PID: 20717 Comm: stable Tainted: G W 5.17.0-rc3+ #747 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:load_new_mm_cr3+0x82/0xe0 RSP: 0018:ffffc9000489fa98 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 8000000105393004 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277d1b788 RBP: 0000000000000004 R08: ffff888277d1b780 R09: ffffc9000489f8b8 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88810678a800 R14: 0000000000000004 R15: 0000000000000c33 FS: 00007fa9f0e72700(0000) GS:ffff888277d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001001b5003 CR4: 0000000000172ea0 Call Trace: <TASK> switch_mm_irqs_off+0x1cb/0x460 __text_poke+0x308/0x3e0 text_poke_bp_batch+0x168/0x220 text_poke_finish+0x1b/0x30 arch_jump_label_transform_apply+0x18/0x30 static_key_slow_inc_cpuslocked+0x7c/0x90 static_key_slow_inc+0x16/0x20 kvm_lapic_set_base+0x116/0x190 kvm_set_apic_base+0xa5/0xe0 kvm_set_msr_common+0x2f4/0xf60 vmx_set_msr+0x355/0xe70 [kvm_intel] kvm_set_msr_ignored_check+0x91/0x230 kvm_emulate_wrmsr+0x36/0x120 vmx_handle_exit+0x609/0x6c0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x146f/0x1b80 kvm_vcpu_ioctl+0x279/0x690 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- This reverts commit 15ad9762d69fd8e40a4a51828c1d6b0c1b8fbea0. Fixes: 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Reported-by: Wanpeng Li <[email protected]> Cc: Lai Jiangshan <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Lai Jiangshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"Sean Christopherson3-14/+14
Undo a nested VMX fix as a step toward reverting the commit it fixed, 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"), as the underlying premise that "host CR3 in the vcpu thread can only be changed when scheduling" is wrong. This reverts commit a9f2705ec84449e3b8d70c804766f8e97e23080d. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25can: gs_usb: change active_channels's type from atomic_t to u8Vincent Mailhol1-5/+5
The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-25can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8Vincent Mailhol2-7/+10
The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/[email protected] Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-24Merge branch 'mptcp-fixes-for-5-17'Jakub Kicinski2-4/+18
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that have performed a fallback to TCP. Patch 2 is a selftest fix to correctly remove temp files. Patch 3 fixes a shift-out-of-bounds issue found by syzkaller. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24mptcp: Correctly set DATA_FIN timeout when number of retransmits is largeMat Martineau1-2/+5
Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39e62c ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24selftests: mptcp: do complete cleanup at exitPaolo Abeni1-2/+2
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24mptcp: accurate SIOCOUTQ for fallback socketPaolo Abeni1-0/+11
The MPTCP SIOCOUTQ implementation is not very accurate in case of fallback: it only measures the data in the MPTCP-level write queue, but it does not take in account the subflow write queue utilization. In case of fallback the first can be empty, while the latter is not. The above produces sporadic self-tests issues and can foul legit user-space application. Fix the issue additionally querying the subflow in case of fallback. Fixes: 644807e3e462 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260 Reported-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24riscv: fix oops caused by irqsoff latency tracerChangbin Du4-5/+45
The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <[email protected]> Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-02-24riscv: fix nommu_k210_sdcard_defconfigDamien Le Moal1-1/+1
Instead of an arbitrary delay, use the "rootwait" kernel option to wait for the mmc root device to be ready. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-02-24tracing: Dump stacktrace trigger to the corresponding instanceDaniel Bristot de Oliveira1-1/+6
The stacktrace event trigger is not dumping the stacktrace to the instance where it was enabled, but to the global "instance." Use the private_data, pointing to the trigger file, to figure out the corresponding trace instance, and use it in the trigger action, like snapshot_trigger does. Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org Cc: [email protected] Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Reviewed-by: Tom Zanussi <[email protected]> Tested-by: Tom Zanussi <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-02-24Merge tag 'for-net-2022-02-24' of ↵Jakub Kicinski5-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with RFCOMM - Fix regression with LE devices using Privacy (RPA) - Fix regression with LE devices not waiting proper timeout to establish connections - Fix race in smp * tag 'for-net-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Fix not using conn_timeout Bluetooth: hci_sync: Fix hci_update_accept_list_sync Bluetooth: assign len after null check Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks Bluetooth: fix data races in smp_unregister(), smp_del_chan() Bluetooth: hci_core: Fix leaking sent_cmd skb ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-99/+10
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple driver fixes in the clk subsystem - Fix a hang due to bad clk parent in the Ingenic jz4725b driver - Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that shouldn't be touched" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: jz4725b: fix mmc0 clock gating clk: qcom: gcc-msm8994: Remove NoC clocks
2022-02-24Merge tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds25-81/+156
Pull drm fixes from Dave Airlie: "Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty small. core: - edid: Always set RGB444 tegra: - tegra186 suspend/resume fixes - syncpoint wait fix - build warning fix - eDP on older devices fix amdgpu: - Display FP fix - PCO powergating fix - RDNA2 OEM SKU stability fixes - Display PSR fix - PCI ASPM fix - Display link encoder fix for TEST_COMMIT - Raven2 suspend/resume fix - Fix a regression in virtual display support - GPUVM eviction fix i915: - Fix QGV handling on ADL-P+ - Fix bw atomic check when switching between SAGV vs. no SAGV - Disconnect PHYs left connected by BIOS on disabled ports - Fix SAVG to no SAGV transitions on TGL+ - Print PHY name properly on calibration error (DG2) imx: - dcss: Select GEM CMA helpers radeon: - Fix some variables's type vc4: - Fix codec cleanup - Fix PM reference counting" * tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits) drm/amdgpu: check vm ready by amdgpu_vm->evicting flag drm/amdgpu: bypass tiling flag check in virtual display case (v2) Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()" drm/amdgpu: do not enable asic reset for raven2 drm/amd/display: Fix stream->link_enc unassigned during stream removal drm/amd: Check if ASPM is enabled from PCIe subsystem drm/edid: Always set RGB444 drm/tegra: dpaux: Populate AUX bus drm/radeon: fix variable type drm/amd/display: For vblank_disable_immediate, check PSR is really used drm/amd/pm: fix some OEM SKU specific stability issues drm/amdgpu: disable MMHUB PG for Picasso drm/amd/display: Protect update_bw_bounding_box FPU code. drm/i915/dg2: Print PHY name properly on calibration error drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV drm/i915: Correctly populate use_sagv_wm for all pipes drm/i915: Disconnect PHYs left connected by BIOS on disabled ports drm/i915: Widen the QGV point mask drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER drm/vc4: crtc: Fix runtime_pm reference counting ...
2022-02-25drm/exynos: Search for TE-gpio in DSI panel's nodeMarek Szyprowski1-1/+1
TE-gpio, if defined, is placed in the panel's node, not the parent DSI node. Change the devm_gpiod_get_optional() to gpiod_get_optional() and pass proper device node to it. The code already has a proper cleanup path, so it looks that the devm_* variant has been applied accidentally during the conversion to gpiod API. Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface") Signed-off-by: Marek Szyprowski <[email protected]> Fixed a typo. Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: Don't fail if no TE-gpio is defined for DSI driverMarek Szyprowski1-1/+3
TE-gpio is optional and if it is not found then gpiod_get_optional() returns NULL. In such case the code will continue and try to convert NULL gpiod to irq what in turn fails. The failure is then propagated and driver is not registered. Fix this by returning early from exynos_dsi_register_te_irq() if no TE-gpio is found. Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface") Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: gsc: Use platform_get_irq() to get the interruptLad Prabhakar1-7/+3
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/fimc: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+5
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-9/+4
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: mixer: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+6
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-9/+3
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-24Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of ↵Linus Torvalds5-21/+8
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix double free in in the error path when opening perf.data from multiple files in a directory instead of from a single file - Sync the msr-index.h copy with the kernel sources - Fix error when printing 'weight' field in 'perf script' - Skip failing sigtrap test for arm+aarch64 in 'perf test' - Fix failure to use a cpu list for uncore events in hybrid systems, e.g. Intel Alder Lake * tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix error when printing 'weight' field tools arch x86: Sync the msr-index.h copy with the kernel sources perf data: Fix double free in perf_session__delete() perf evlist: Fix failed to use cpu list for uncore events perf test: Skip failing sigtrap test for arm+aarch64
2022-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-18/+86
Pull kvm fixes from Paolo Bonzini: "x86 host: - Expose KVM_CAP_ENABLE_CAP since it is supported - Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode - Ensure async page fault token is nonzero - Fix lockdep false negative - Fix FPU migration regression from the AMX changes x86 guest: - Don't use PV TLB/IPI/yield on uniprocessor guests PPC: - reserve capability id (topic branch for ppc/kvm)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled KVM: x86/mmu: make apf token non-zero to fix bug KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3 x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU x86/kvm: Fix compilation warning in non-x86_64 builds x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0 x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0 kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode KVM: Fix lockdep false negative during host resume KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
2022-02-24Merge tag 'imx-fixes-5.17-2' of ↵Arnd Bergmann246-811/+1611
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.17, round 2: - Drop reset signal from i.MX8MM vpumix power domain to fix a system hang. - Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP device tree. - Fix a clock disabling imbalance in gpcv2 driver. Signed-off-by: Arnd Bergmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.