aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-05[S390] kprobes: coding styleMartin Schwidefsky1-34/+34
Correct some minor coding style issues. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: restructure handler functionMartin Schwidefsky1-43/+71
Restructure the kprobe breakpoint handler function. Add comments to make it more comprehensible and add a sanity check for re-entering kprobes. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: jprobe save and restoreMartin Schwidefsky2-13/+8
Register %r14 and %r15 are already stored in jprobe_saved_regs, no need to store them a second time in jprobe_saved_r14 / jprobe_saved_r15. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: insn slotsMartin Schwidefsky2-10/+1
The s390 architecture can execute code on kmalloc/vmalloc memory. No need for the __ARCH_WANT_KPROBES_INSN_SLOT detour. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: activation and deactivationMartin Schwidefsky1-32/+27
Replace set_current_kprobe/reset_current_kprobe/save_previous_kprobe/ restore_previous_kprobe with a simpler scheme push_kprobe/pop_kprobe. The mini kprobes stack can store up to two active kprobes. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: instruction fixupMartin Schwidefsky2-78/+57
Determine instruction fixup details in resume_execution, no need to do it beforehand. Remove fixup, ilen and reg from arch_specific_insn. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: instruction swapMartin Schwidefsky2-12/+9
Move the definition of the helper structure ins_replace_args to the only place where it is used and drop the old member as it is not needed. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: single step cleanupMartin Schwidefsky2-44/+36
The saved interrupt mask and the saved control registers are only relevant while single stepping is set up. A secondary kprobe while kprobe single stepping is active may not occur. That makes is safe to remove the save and restore of kprobe_saved_imask / kprobe_save_ctl from save_previous_kprobe and restore_previous_kprobe. Move all single step related code to two functions, enable_singlestep and disable_singlestep. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: single stepped breakpointMartin Schwidefsky1-6/+0
Remove special case of a kprobe on a breakpoint while a relocated instruction is single stepped. The only instruction that may cause a fault while kprobe single stepping is active is the relocated instruction. There is no kprobe on the instruction slot retrieved with get_insn_slot(). Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] cleanup s390 KconfigMartin Schwidefsky7-220/+218
Make use of def_bool and def_tristate where possible and add sensible defaults to the config symbols where applicable. This shortens the defconfig file by another ~40 lines. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: Fix check to look for facility bits 2 & 65Felix Beck1-1/+1
Fix the check for ap interupts to look for facility bits 2 and 65. Make sure that we only register interrupts for aps, if the machine has ap interrupt support. This patch is relevant only for the 2.6.37 stable series. Cc: [email protected] Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05ARM: vexpress: add sched_clock() for Versatile ExpressRussell King3-2/+8
Add a sched_clock() implementation to Versatile Express using the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-05Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King209-3522/+14078
devel-stable
2011-01-05Revert "fs: use RCU read side protection in d_validate"Nick Piggin1-12/+19
This reverts commit 3825bdb7ed920845961f32f364454bee5f469abb. You cannot dget() a dentry without having a reference, or holding a lock that guarantees it remains valid. Signed-off-by: Nick Piggin <[email protected]>
2011-01-05Merge branch 'common/fbdev-mipi' of ↵Paul Mundt4-51/+43
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-01-05Merge branches 'rmobile/mmcif', 'rmobile/ag5' and 'rmobile/mackerel' into ↵Paul Mundt6-31/+373
rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig Signed-off-by: Paul Mundt <[email protected]>
2011-01-05fbdev: sh_mipi_dsi: use platform provided register layout and valuesGuennadi Liakhovetski1-5/+11
Different sh-mobile SoCs have variations in their MIPI DSI register layouts, besides, different LCD panels require different configuration parameters. This patch switches the driver to use platform-provided MIPI DSI parameters. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05ARM: mach-shmobile: specify sh7372 MIPI DSI register layoutGuennadi Liakhovetski1-0/+1
Prepare the ap4evb board for the MIPI DSI driver transition to support different register layouts. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05fbdev: sh_mipi_dsi: support different register layoutsGuennadi Liakhovetski1-0/+6
The register layout of the MIPI DSI unit on sh-mobile SoCs differ. Add platform parameters to support such variations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05ARM: mach-shmobile: improve MIPI DSI clock configurationGuennadi Liakhovetski2-43/+8
Now, that the MIPI DSI driver implements runtime PM, we don't need anymore to configure clocks statically in the platform code. This patch also adds a DSITX1 clock definition for sh7372 and attaches PHY clocks to respective devices. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05fbdev: sh-mobile: implement MIPI DSI runtime PM supportGuennadi Liakhovetski1-3/+17
On SH-Mobile platforms using runtime PM with the MIPI DSI driver switches the DSI Tx link clock on PM events. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05ARM: mach-shmobile: sh73a0: fix div4 tableTakashi YOSHII1-1/+1
sh73a0 has divisor[12] setting as 1/7 on FRQCRA. Signed-off-by: Takashi YOSHII <[email protected]> Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05ARM: mach-shmobile: ap4/mackerel: modify wrong comment out of USBKuninori Morimoto2-2/+2
Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05ARM: mach-shmobile: Mackerel VGA camera supportMagnus Damm1-1/+125
Add VGA camera support to the Mackerel board using soc_camera_platform. The VGA camera module is hooked up using the 8-bit CEU bus, and it is constantly bursting out frames in fixed video mode setting. The camera module does not allow any I2C control. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05sh: correct definitions to access stack pointersRoel Kluin3-4/+4
A definition like: #define regs_return_value(regs) ((regs)->regs[0]) called with regs_return_value(foo) will be preprocessed to: ((foo)->foo[0]) ^^^ So to fix this to ensure the preprocessor compiles such calls correctly. Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-05mmc: sh_mmcif: make DMA support by the driver unconditionalGuennadi Liakhovetski2-26/+0
Simplify the driver by removing the possibility to build it without the DMA support and remove the respective Kconfig parameter. Signed-off-by: Guennadi Liakhovetski <[email protected]> Acked-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-04sparc: update copyright in piggyback.cSam Ravnborg1-1/+2
Update copyright info in piggyback.c to include info from piggyback_64.c. Include my own copyright too. Signed-off-by: Sam Ravnborg <[email protected]> Cc: Josip Rodin <[email protected]> Cc: Jakub Jelinek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: unify strip command in boot/MakefileSam Ravnborg1-6/+4
Include an additional "Kernel is ready" print for zImage Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: rename piggyback_32 to piggybackSam Ravnborg2-14/+6
Now that we use the same piggyback for 32 and 64 bit we can drop the _32 suffix. Include some trivial unification in the Makefile now that 32 and 64 bit can share the same piggyback command. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: fix tftpboot.img for sparc64 on little-endian hostSam Ravnborg3-133/+80
piggyback_32 adapted to support sparc64: - locating "HdrS" differs for sparc and sparc64 - sparc64 updates a_text, a_data + a_bss in the final a.out header Updated Makefile to use piggyback_32 for sparc64. Deleted the now unused piggyback_64.c piggyback_32.c is host endian neutral and works on both little-endian and big-endian hosts. This fixes a long standing bug where sparc64 could not generate tftpboot.img on a x86 host. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: add $BITS to piggyback argumentsSam Ravnborg2-17/+30
Add new option to piggyback that identify if this is for 32 or 64 bit. Use this information to determine the alignment used. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: remove obsolete ELF support in piggyback_32.cSam Ravnborg1-22/+5
As we always convert to a.out there is no need to support ELF. Removing ELF support because: - it is not used - it simplifies code to support a.out only Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: additional comments to piggyback_32.cSam Ravnborg1-2/+21
While reverse engineering the functionality of piggyback I missed that the code was actually commented. So I added a few comments. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: use _start for the start entry (like 64 bit does)Sam Ravnborg3-10/+7
We use "_start" in 64 bit - do the same in 32 bit. It is always good to be consistent. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: use trapbase in setup_archSam Ravnborg1-2/+1
start and trapbase point to the same address. But using start to assing to sparc_ttable looked confusing. Replace this with the use of trapbase. Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04sparc: refactor piggy_32.cSam Ravnborg1-40/+102
Refactoring to increase readability (a little). - sort includes - spaces around operators - small helpers introduced - added a few comments Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-04Linux 2.6.37Linus Torvalds1-1/+1
2011-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds14-25/+87
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv4/route.c: respect prefsrc for local routes bridge: stp: ensure mac header is set bridge: fix br_multicast_ipv6_rcv for paged skbs atl1: fix oops when changing tx/rx ring params drivers/atm/atmtcp.c: add missing atm_dev_put starfire: Fix dma_addr_t size test for MIPS tg3: fix return value check in tg3_read_vpd() Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings() ISDN, Gigaset: Fix memory leak in do_disconnect_req() CAN: Use inode instead of kernel address for /proc file skfp: testing the wrong variable in skfp_driver_init() ppp: allow disabling multilink protocol ID compression ehea: Avoid changing vlan flags ueagle-atm: fix PHY signal initialization race
2011-01-04Merge branch 'master' of ↵David S. Miller14-25/+87
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-04libertas: down_interruptible() can return -EINTR, not EINTRroel kluin1-1/+1
Fix test in lbs_spi_thread(). down_interruptible() can return -EINTR, but not EINTR. Signed-off-by: Roel Kluin <[email protected]> Cc: Dan Williams <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04mac80211: fix some key comments and codeJohannes Berg1-21/+17
The key documentation is slightly out of date, fix that. Also, the list entry in the key struct is no longer used that way, so list_del_init() isn't necessary any more there. Finally, ieee80211_key_link() is no longer invoked under RCU read lock, but rather with an appropriate station lock held. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04ath9k_htc: Fix packet injectionSujith Manoharan1-8/+64
To inject a packet in monitor mode, a dummy station has to be associated with the monitor interface in the target. Failing to do this would result in a firmware crash on the device. Signed-off-by: Sujith Manoharan <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04ath5k: ath5k_eeprom_mode_from_channel() returns signedDan Carpenter1-2/+4
ath5k_eeprom_mode_from_channel() returns -1 on error but we're storing the result in "ee_mode" which is an unsigned char. This breaks the error handling. This patch makes "ee_mode" an int. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04ath9k : few rate control clean upsMohammed Shafi Shajakhan2-11/+8
Remove some obvious looking dead code and rename few functions Signed-off-by: Mohammed Shafi Shajakhan <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04Revert "mac80211: temporarily disable reorder release timer"Christian Lamparter1-24/+0
This reverts enables the reorder release timer once again. The issues laid out in: <http://www.spinics.net/lists/linux-wireless/msg57214.html> Have been addressed by: mac80211: serialize rx path workers mac80211: ignore PSM bit of reordered frames Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04mac80211: serialize rx path workersChristian Lamparter3-43/+49
This patch addresses the issue of serialization between the main rx path and various reorder release timers. <http://www.spinics.net/lists/linux-wireless/msg57214.html> It converts the previously local "frames" queue into a global rx queue [rx_skb_queue]. This way, everyone (be it the main rx-path or some reorder release timeout) can add frames to it. Only one active rx handler worker [ieee80211_rx_handlers] is needed. All other threads which have lost the race of "runnning_rx_handler" can now simply "return", knowing that the thread who had the "edge" will also take care of their workload. Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04ath9k: fix beacon restart on channel changeRajkumar Manoharan1-1/+2
Restart the beacon timers only if the beacon was already configured. Otherwise beacons timers are restarted unnecessarily in unassociated state too. Cc: [email protected] Signed-off-by: Rajkumar Manoharan <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04Revert "ath9k: Parse DTIM period from mac80211"Mohammed Shafi Shajakhan2-4/+2
This reverts commit 0ce3bcfc84900a64347b0fe1140229bd81314008. Event though with the above commit we obtain the configured DTIM period from the AP rather than always hardcoding it to '1', this seems to cause problems under the following scenarios: * Preventing association with broken AP's * Adds latency in roaming So its better to always use the safe value of '1' for dtim period Cc: Jouni Malinen <[email protected]> Signed-off-by: Mohammed Shafi Shajakhan <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04cfg80211: fix transposition of words in printkBob Copeland1-1/+1
Fixes the misplaced article in the following: "cfg80211: Updating information on frequency 5785 MHz for 20 a MHz width channel with regulatory rule:" Signed-off-by: Bob Copeland <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-01-04mac80211: Fix mesh portal communication with other mesh nodes.Joel A Fernandes1-4/+10
Fixed a bug where if a mesh interface has a different MAC address from its bridge interface, then it would not be able to send data traffic to any other mesh node. This also adds support for communication between mesh nodes and external bridged nodes by using a 6 address format if the source is a node within the mesh and the destination is an external node proxied by a mesh portal. Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: John W. Linville <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.