| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
txmsg is declared as {0}, no need to clear individual fields later on.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Improve the readability of a range check.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
commit 394216275c7d ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE from s390.
So drop the unused pm ops from the s390-only af_iucv socket code.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
commit 394216275c7d ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE from s390.
So drop the unused pm ops from the s390-only iucv bus driver.
CC: Hendrik Brueckner <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Julian Wiedmann says:
====================
s390/net: updates 2020-05-19
please apply the following patch series to netdev's net-next tree.
s390 dropped its support for power management, this removes the relevant
code from the s390 network drivers.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 394216275c7d ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE on s390.
So drop the unused pm ops from the iucv drivers.
CC: Hendrik Brueckner <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
commit 5e1fb45ec8e2 ("s390/ccwgroup: remove pm support") removed power
management support from the ccwgroup bus driver. So remove the
associated callbacks from all ccwgroup drivers.
CC: Vineeth Vijayan <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.
Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).
Signed-off-by: Marc Payne <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This changes the HMAC used in the ADD_ADDR option from the leftmost 64
bits to the rightmost 64 bits as described in RFC 8684, section 3.4.1.
This issue was discovered while adding support to packetdrill for the
ADD_ADDR v1 option.
Fixes: 3df523ab582c ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Todd Malsbary <[email protected]>
Acked-by: Christoph Paasch <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
Third and most likely the last set of fixes for v5.7. Only one
iwlwifi fix this time.
iwlwifi
* another fix for QuZ device configuration
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.
This change fixes the for-loop to only read/write six bytes.
Based on a proposed fix from Finn Thain <[email protected]>.
Signed-off-by: Jeremy Kerr <[email protected]>
Reported-by: Stan Johnson <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Reported-by: Finn Thain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ext4 supports max number of logical blocks in a file to be 0xffffffff.
(This is since ext4_extent's ee_block is __le32).
This means that EXT4_MAX_LOGICAL_BLOCK should be 0xfffffffe (starting
from 0 logical offset). This patch fixes this.
The issue was seen when ext4 moved to iomap_fiemap API and when
overlayfs was mounted on top of ext4. Since overlayfs was missing
filemap_check_ranges(), so it could pass a arbitrary huge length which
lead to overflow of map.m_len logic.
This patch fixes that.
Fixes: d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework")
Reported-by: [email protected]
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2020-05-18
This series contains updates to igc driver only.
Sasha adds ECN support for TSO by adding the NETIF_F_TSO_ECN flag, which
aligns with other Intel drivers. Also cleaned up defines that are not
supported or used in the igc driver.
Andre does most of the changes with updating the log messages for igc
driver.
Vitaly adds support for EEPROM, register and link ethtool
self-tests.
v2: Fixed up the added ethtool self-tests based on feedback from the
community. Dropped the four patches that removed '\n' from log
messages.
v3: Reverted the debug message changes in patch 2 for messages in
igc_probe, also made reg_test[] static in patch 3 based on community
feedback
v4: Updated the patch description for patch 2, which referred to changes
that no longer existed in the patch
v5: Scrubbed patches 4-7 patch description, which also referred to
changes that no longer existed in the patch
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of driver and core fixes as well as MAINTAINER update"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: add maintainer for mediatek i2c controller driver
i2c: mux: Replace zero-length array with flexible-array
i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'
i2c: altera: Fix race between xfer_msg and isr thread
i2c: algo-pca: update contact email
i2c: at91: Fix pinmux after devm_gpiod_get() for bus recovery
i2c: use my kernel.org address from now on
i2c: fix missing pm_runtime_put_sync in i2c_device_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Vitaly to fix reenlightenment notifications"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Properly suspend/resume reenlightenment notifications
|
|
It's good to be able to compile bpf_iter selftest even on systems that don't
have the very latest vmlinux.h, e.g., for libbpf tests against older kernels in
Travis CI. To that extent, re-define bpf_iter_meta and corresponding bpf_iter
context structs in each selftest. To avoid type clashes with vmlinux.h, rename
vmlinux.h's definitions to get them out of the way.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Sync tools/include/uapi/linux/bpf.h from include/uapi.
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"All related to the AMD IOMMU driver:
- ACPI table parser fix to correctly read the UID of ACPI devices
- ACPI UID device matching fix
- Fix deferred device attachment to a domain in kdump kernels when
the IOMMU driver uses the dma-iommu DMA-API implementation"
* tag 'iommu-fixes-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix deferred domain attachment
iommu/amd: Fix get_acpihid_device_id()
iommu/amd: Fix over-read of ACPI UID from IVRS table
|
|
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9cff ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9cff ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Daniel Borkmann says:
====================
Trivial patch to add get{peer,sock}name cgroup attach types to the BPF
sock_addr programs in order to enable rewriting sockaddr structs from
both calls along with libbpf and bpftool support as well as selftests.
Thanks!
v1 -> v2:
- use __u16 for ports in start_server_with_port() signature and in
expected_{local,peer} ports in the test case (Andrey)
- Added both Andrii's and Andrey's ACKs
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Although not exactly identical, unthrottle_cfs_rq() and enqueue_task_fair()
are quite close and follow the same sequence for enqueuing an entity in the
cfs hierarchy. Modify unthrottle_cfs_rq() to use the same pattern as
enqueue_task_fair(). This fixes a problem already faced with the latter and
add an optimization in the last for_each_sched_entity loop.
Fixes: fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
Reported-by Tao Zhou <[email protected]>
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Phil Auld <[email protected]>
Reviewed-by: Ben Segall <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The intention of commit 96e74ebf8d59 ("sched/debug: Add task uclamp
values to SCHED_DEBUG procfs") was to print requested and effective
task uclamp values. The requested values printed are read from p->uclamp,
which holds the last effective values. Fix this by printing the values
from p->uclamp_req.
Fixes: 96e74ebf8d59 ("sched/debug: Add task uclamp values to SCHED_DEBUG procfs")
Signed-off-by: Pavankumar Kondeti <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <[email protected]>
Signed-off-by: Phil Auld <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Extend the existing connect_force_port test to assert get{peer,sock}name programs
as well. The workflow for e.g. IPv4 is as follows: i) server binds to concrete
port, ii) client calls getsockname() on server fd which exposes 1.2.3.4:60000 to
client, iii) client connects to service address 1.2.3.4:60000 binds to concrete
local address (127.0.0.1:22222) and remaps service address to a concrete backend
address (127.0.0.1:60123), iv) client then calls getsockname() on its own fd to
verify local address (127.0.0.1:22222) and getpeername() on its own fd which then
publishes service address (1.2.3.4:60000) instead of actual backend. Same workflow
is done for IPv6 just with different address/port tuples.
# ./test_progs -t connect_force_port
#14 connect_force_port:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Link: https://lore.kernel.org/bpf/3343da6ad08df81af715a95d61a84fb4a960f2bf.1589841594.git.daniel@iogearbox.net
|
|
Make bpftool aware and add the new get{peer,sock}name attach types to its
cli, documentation and bash completion to allow attachment/detachment of
sock_addr programs there.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Link: https://lore.kernel.org/bpf/9765b3d03e4c29210c4df56a9cc7e52f5f7bb5ef.1589841594.git.daniel@iogearbox.net
|
|
Trivial patch to add the new get{peer,sock}name attach types to the section
definitions in order to hook them up to sock_addr cgroup program type.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Link: https://lore.kernel.org/bpf/7fcd4b1e41a8ebb364754a5975c75a7795051bd2.1589841594.git.daniel@iogearbox.net
|
|
As stated in 983695fa6765 ("bpf: fix unconnected udp hooks"), the objective
for the existing cgroup connect/sendmsg/recvmsg/bind BPF hooks is to be
transparent to applications. In Cilium we make use of these hooks [0] in
order to enable E-W load balancing for existing Kubernetes service types
for all Cilium managed nodes in the cluster. Those backends can be local
or remote. The main advantage of this approach is that it operates as close
as possible to the socket, and therefore allows to avoid packet-based NAT
given in connect/sendmsg/recvmsg hooks we only need to xlate sock addresses.
This also allows to expose NodePort services on loopback addresses in the
host namespace, for example. As another advantage, this also efficiently
blocks bind requests for applications in the host namespace for exposed
ports. However, one missing item is that we also need to perform reverse
xlation for inet{,6}_getname() hooks such that we can return the service
IP/port tuple back to the application instead of the remote peer address.
The vast majority of applications does not bother about getpeername(), but
in a few occasions we've seen breakage when validating the peer's address
since it returns unexpectedly the backend tuple instead of the service one.
Therefore, this trivial patch allows to customise and adds a getpeername()
as well as getsockname() BPF cgroup hook for both IPv4 and IPv6 in order
to address this situation.
Simple example:
# ./cilium/cilium service list
ID Frontend Service Type Backend
1 1.2.3.4:80 ClusterIP 1 => 10.0.0.10:80
Before; curl's verbose output example, no getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (10.0.0.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
After; with getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (1.2.3.4) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
Originally, I had both under a BPF_CGROUP_INET{4,6}_GETNAME type and exposed
peer to the context similar as in inet{,6}_getname() fashion, but API-wise
this is suboptimal as it always enforces programs having to test for ctx->peer
which can easily be missed, hence BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAME split.
Similarly, the checked return code is on tnum_range(1, 1), but if a use case
comes up in future, it can easily be changed to return an error code instead.
Helper and ctx member access is the same as with connect/sendmsg/etc hooks.
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Link: https://lore.kernel.org/bpf/61a479d759b2482ae3efb45546490bacd796a220.1589841594.git.daniel@iogearbox.net
|
|
When building with Clang + -Wtautological-compare and
CONFIG_CPUMASK_OFFSTACK unset:
arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL &&
^~~~~~~~~~~ ~~~~
arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
^~~~~~~~~~~ ~~~~
2 warnings generated.
Commit
f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")
added cpumask_available() to fix warnings of this nature. Use that here
so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's
value.
Reported-by: Sedat Dilek <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/982
Link: https://lkml.kernel.org/r/[email protected]
|
|
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Commit bc56c919fce7 ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().")
recently changed bpf_prog_test_run_xdp() to use larger frames for XDP in
order to test tail growing frames (via bpf_xdp_adjust_tail) and to have
memory backing frame better resemble drivers.
The commit contains a bug, as it tries to copy the max data size from
userspace, instead of the size provided by userspace. This cause XDP
unit tests to fail sporadically with EFAULT, an unfortunate behavior.
The fix is to only copy the size specified by userspace.
Fixes: bc56c919fce7 ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().")
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/158980712729.256597.6115007718472928659.stgit@firesoul
|
|
Because the previous two commit replaced the bpf_load implementation of
the user program with libbpf, the corresponding kernel program's MAP
definition can be replaced with new BTF-defined map syntax.
This commit only updates the samples which uses libbpf API for loading
bpf program not with bpf_load.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit adds tracex7 test file (testfile.img) to .gitignore which
comes from test_override_return.sh.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
BPF tail call uses the BPF_MAP_TYPE_PROG_ARRAY type map for calling
into other BPF programs and this PROG_ARRAY should be filled prior to
use. Currently, samples with the PROG_ARRAY type MAP fill this program
array with bpf_load. For bpf_load to fill this map, kernel BPF program
must specify the section with specific format of <prog_type>/<array_idx>
(e.g. SEC("socket/0"))
But by using libbpf instead of bpf_load, user program can specify which
programs should be added to PROG_ARRAY. The advantage of this approach
is that you can selectively add only the programs you want, rather than
adding all of them to PROG_ARRAY, and it's much more intuitive than the
traditional approach.
This commit refactors user programs with the PROG_ARRAY type MAP with
libbpf instead of using bpf_load.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently, the kprobe BPF program attachment method for bpf_load is
quite old. The implementation of bpf_load "directly" controls and
manages(create, delete) the kprobe events of DEBUGFS. On the other hand,
using using the libbpf automatically manages the kprobe event.
(under bpf_link interface)
By calling bpf_program__attach(_kprobe) in libbpf, the corresponding
kprobe is created and the BPF program will be attached to this kprobe.
To remove this, by simply invoking bpf_link__destroy will clean up the
event.
This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with
libbpf using bpf_link interface and bpf_program__attach.
tracex2_kern.c, which tracks system calls (sys_*), has been modified to
append prefix depending on architecture.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Current method of checking pointer error is not user friendly.
Especially the __must_check define makes this less intuitive.
Since, libbpf has an API libbpf_get_error() which checks pointer error,
this commit refactors existing pointer error check logic with libbpf.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When SYNC_STATE_ONLY support was added in commit 05ef983e0d65 ("driver
core: Add device link support for SYNC_STATE_ONLY flag"),
device_link_add() incorrectly skipped adding the new SYNC_STATE_ONLY
device link to the supplier's and consumer's "device link" list.
This causes multiple issues:
- The device link is lost forever from driver core if the caller
didn't keep track of it (caller typically isn't expected to). This is
a memory leak.
- The device link is also never visible to any other code path after
device_link_add() returns.
If we fix the "device link" list handling, that exposes a bunch of
issues.
1. The device link "status" state management code rightfully doesn't
handle the case where a DL_FLAG_MANAGED device link exists between a
supplier and consumer, but the consumer manages to probe successfully
before the supplier. The addition of DL_FLAG_SYNC_STATE_ONLY links break
this assumption. This causes device_links_driver_bound() to throw a
warning when this happens.
Since DL_FLAG_SYNC_STATE_ONLY device links are mainly used for creating
proxy device links for child device dependencies and aren't useful once
the consumer device probes successfully, this patch just deletes
DL_FLAG_SYNC_STATE_ONLY device links once its consumer device probes.
This way, we avoid the warning, free up some memory and avoid
complicating the device links "status" state management code.
2. Creating a DL_FLAG_STATELESS device link between two devices that
already have a DL_FLAG_SYNC_STATE_ONLY device link will result in the
DL_FLAG_STATELESS flag not getting set correctly. This patch also fixes
this.
Lastly, this patch also fixes minor whitespace issues.
Cc: [email protected]
Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Saravana Kannan <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The IOMMU core code has support for deferring the attachment of a domain
to a device. This is needed in kdump kernels where the new domain must
not be attached to a device before the device driver takes it over.
When the AMD IOMMU driver got converted to use the dma-iommu
implementation, the deferred attaching got lost. The code in
dma-iommu.c has support for deferred attaching, but it calls into
iommu_attach_device() to actually do it. But iommu_attach_device()
will check if the device should be deferred in it code-path and do
nothing, breaking deferred attachment.
Move the is_deferred_attach() check out of the attach_device path and
into iommu_group_add_device() to make deferred attaching work from the
dma-iommu code.
Fixes: 795bbbb9b6f8 ("iommu/dma-iommu: Handle deferred devices")
Reported-by: Jerry Snitselaar <[email protected]>
Suggested-by: Robin Murphy <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Tested-by: Jerry Snitselaar <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Tom Murphy <[email protected]>
Cc: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If the mapping address is wrong then we have to release the reference to
it before returning -EINVAL.
Fixes: 088880ddc0b2 ("drm/etnaviv: implement softpin")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
|
|
The GC860 has one GPU device which has a 2d and 3d core. In this case
we want to expose perfmon information for both cores.
The driver has one array which contains all possible perfmon domains
with some meta data - doms_meta. Here we can see that for the GC860
two elements of that array are relevant:
doms_3d: is at index 0 in the doms_meta array with 8 perfmon domains
doms_2d: is at index 1 in the doms_meta array with 1 perfmon domain
The userspace driver wants to get a list of all perfmon domains and
their perfmon signals. This is done by iterating over all domains and
their signals. If the userspace driver wants to access the domain with
id 8 the kernel driver fails and returns invalid data from doms_3d with
and invalid offset.
This results in:
Unable to handle kernel paging request at virtual address 00000000
On such a device it is not possible to use the userspace driver at all.
The fix for this off-by-one error is quite simple.
Reported-by: Paul Cercueil <[email protected]>
Tested-by: Paul Cercueil <[email protected]>
Fixes: ed1dd899baa3 ("drm/etnaviv: rework perfmon query infrastructure")
Cc: [email protected]
Signed-off-by: Christian Gmeiner <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
|
|
This change fixes crash observed on PM resume. This bug
was introduced in the change made for flash-edu support.
Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
Signed-off-by: Kamal Dasu <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need
the existing quirk for pins for PB51 and co.
Signed-off-by: PeiSen Hou <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If 'thermal_cooling_device_register()' fails, we must undo what has been
allocated so far. So we must go to 'err_thermal_destroy' instead of
returning directly
In case of error in 'ath11k_thermal_register()', the previous
'thermal_cooling_device_register()' call must also be undone. Move the
'ar->thermal.cdev = cdev' a few lines above in order for this to be done
in 'ath11k_thermal_unregister()' which is called in the error handling
path.
Fixes: 2a63bbca06b2 ("ath11k: add thermal cooling device support")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In [0] a user reported reproducible tx timeouts on RTL8168f except
PktCntrDisable is set and irq coalescing is enabled.
Realtek told me that they are not aware of any related hw issue on
this chip version, therefore root cause is still unknown. It's not
clear whether the issue affects one or more chip versions in general,
or whether issue is specific to reporter's system.
Due to this level of uncertainty, and due to the fact that I'm aware
of this one report only, let's apply the workaround on net-next only.
After this change setting irq coalescing via ethtool can reliably
avoid the issue on the affected system.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=207205
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Let the compiler decide about inlining, and as confirmed by Eric it's
better to use WRITE_ONCE here to ensure that the descriptor ownership
is transferred to NIC immediately.
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Avoid the goto from the rx error handling branch into the else branch,
and in general avoid having the main rx work in the else branch.
In addition ensure proper reverse xmas tree order of variables in the
for loop.
No functional change intended.
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Christoph Hellwig says:
====================
move the SIOCDELRT and SIOCADDRT compat_ioctl handlers v3
this series moves the compat_ioctl handlers into the protocol handlers,
avoiding the need to override the address space limited as in the current
handler.
Changes since v3:
- moar variable reordering
Changes since v1:
- reorder a bunch of variable declarations
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
To prepare removing the global routing_ioctl hack start lifting the code
into the ipv4 and appletalk ->compat_ioctl handlers. Unlike the existing
handler we don't bother copying in the name - there are no compat issues for
char arrays.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|