aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-09-05ipv6: fix a refcnt leak with peer addrNicolas Dichtel1-5/+2
There is no reason to take a refcnt before deleting the peer address route. It's done some lines below for the local prefix route because inet6_ifa_finish_destroy() will release it at the end. For the peer address route, we want to free it right now. This bug has been introduced by commit caeaba79009c ("ipv6: add support of peer address"). Signed-off-by: Nicolas Dichtel <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-05net-timestamp: only report sw timestamp if reporting bit is setWillem de Bruijn2-5/+2
The timestamping API has separate bits for generating and reporting timestamps. A software timestamp should only be reported for a packet when the packet has the relevant generation flag (SKBTX_..) set and the socket has reporting bit SOF_TIMESTAMPING_SOFTWARE set. The second check was accidentally removed. Reinstitute the original behavior. Tested: Without this patch, Documentation/networking/txtimestamp reports timestamps regardless of whether SOF_TIMESTAMPING_SOFTWARE is set. After the patch, it only reports them when the flag is set. Fixes: f24b9be5957b ("net-timestamp: extend SCM_TIMESTAMPING ancillary data struct") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-05drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macrosChen Gang1-5/+0
They are use less, and may generate compiling warnings, so remove them (microblaze, arc, arm64, and unicore32 have already defined PCI_IOBASE). The related warnings (with allmodconfig under microblaze): CC [M] drivers/net/fddi/skfp/skfddi.o In file included from drivers/net/fddi/skfp/skfddi.c:95:0: drivers/net/fddi/skfp/h/skfbi.h:151:0: warning: "PCI_IOBASE" redefined #define PCI_IOBASE 0xffffff00L /* Bit 31..8: I/O Base address */ ^ In file included from include/linux/io.h:22:0, from include/linux/pci.h:31, from drivers/net/fddi/skfp/skfddi.c:82: ./arch/microblaze/include/asm/io.h:33:0: note: this is the location of the previous definition #define PCI_IOBASE ((void __iomem *)_IO_BASE) ^ Signed-off-by: Chen Gang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-05l2tp: fix race while getting PMTU on PPP pseudo-wireGuillaume Nault1-1/+2
Use dst_entry held by sk_dst_get() to retrieve tunnel's PMTU. The dst_mtu(__sk_dst_get(tunnel->sock)) call was racy. __sk_dst_get() could return NULL if tunnel->sock->sk_dst_cache was reset just before the call, thus making dst_mtu() dereference a NULL pointer: [ 1937.661598] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 1937.664005] IP: [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] PGD daf0c067 PUD d9f93067 PMD 0 [ 1937.664005] Oops: 0000 [#1] SMP [ 1937.664005] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables udp_tunnel pppoe pppox ppp_generic slhc deflate ctr twofish_generic twofish_x86_64_3way xts lrw gf128mul glue_helper twofish_x86_64 twofish_common blowfish_generic blowfish_x86_64 blowfish_common des_generic cbc xcbc rmd160 sha512_generic hmac crypto_null af_key xfrm_algo 8021q garp bridge stp llc tun atmtcp clip atm ext3 mbcache jbd iTCO_wdt coretemp kvm_intel iTCO_vendor_support kvm pcspkr evdev ehci_pci lpc_ich mfd_core i5400_edac edac_core i5k_amb shpchp button processor thermal_sys xfs crc32c_generic libcrc32c dm_mod usbhid sg hid sr_mod sd_mod cdrom crc_t10dif crct10dif_common ata_generic ahci ata_piix tg3 libahci libata uhci_hcd ptp ehci_hcd pps_core usbcore scsi_mod libphy usb_common [last unloaded: l2tp_core] [ 1937.664005] CPU: 0 PID: 10022 Comm: l2tpstress Tainted: G O 3.17.0-rc1 #1 [ 1937.664005] Hardware name: HP ProLiant DL160 G5, BIOS O12 08/22/2008 [ 1937.664005] task: ffff8800d8fda790 ti: ffff8800c43c4000 task.ti: ffff8800c43c4000 [ 1937.664005] RIP: 0010:[<ffffffffa049db88>] [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP: 0018:ffff8800c43c7de8 EFLAGS: 00010282 [ 1937.664005] RAX: ffff8800da8a7240 RBX: ffff8800d8c64600 RCX: 000001c325a137b5 [ 1937.664005] RDX: 8c6318c6318c6320 RSI: 000000000000010c RDI: 0000000000000000 [ 1937.664005] RBP: ffff8800c43c7ea8 R08: 0000000000000000 R09: 0000000000000000 [ 1937.664005] R10: ffffffffa048e2c0 R11: ffff8800d8c64600 R12: ffff8800ca7a5000 [ 1937.664005] R13: ffff8800c439bf40 R14: 000000000000000c R15: 0000000000000009 [ 1937.664005] FS: 00007fd7f610f700(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 [ 1937.664005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1937.664005] CR2: 0000000000000020 CR3: 00000000d9d75000 CR4: 00000000000027e0 [ 1937.664005] Stack: [ 1937.664005] ffffffffa049da80 ffff8800d8fda790 000000000000005b ffff880000000009 [ 1937.664005] ffff8800daf3f200 0000000000000003 ffff8800c43c7e48 ffffffff81109b57 [ 1937.664005] ffffffff81109b0e ffffffff8114c566 0000000000000000 0000000000000000 [ 1937.664005] Call Trace: [ 1937.664005] [<ffffffffa049da80>] ? pppol2tp_connect+0x235/0x41e [l2tp_ppp] [ 1937.664005] [<ffffffff81109b57>] ? might_fault+0x9e/0xa5 [ 1937.664005] [<ffffffff81109b0e>] ? might_fault+0x55/0xa5 [ 1937.664005] [<ffffffff8114c566>] ? rcu_read_unlock+0x1c/0x26 [ 1937.664005] [<ffffffff81309196>] SYSC_connect+0x87/0xb1 [ 1937.664005] [<ffffffff813e56f7>] ? sysret_check+0x1b/0x56 [ 1937.664005] [<ffffffff8107590d>] ? trace_hardirqs_on_caller+0x145/0x1a1 [ 1937.664005] [<ffffffff81213dee>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1937.664005] [<ffffffff8114c262>] ? spin_lock+0x9/0xb [ 1937.664005] [<ffffffff813092b4>] SyS_connect+0x9/0xb [ 1937.664005] [<ffffffff813e56d2>] system_call_fastpath+0x16/0x1b [ 1937.664005] Code: 10 2a 84 81 e8 65 76 bd e0 65 ff 0c 25 10 bb 00 00 4d 85 ed 74 37 48 8b 85 60 ff ff ff 48 8b 80 88 01 00 00 48 8b b8 10 02 00 00 <48> 8b 47 20 ff 50 20 85 c0 74 0f 83 e8 28 89 83 10 01 00 00 89 [ 1937.664005] RIP [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP <ffff8800c43c7de8> [ 1937.664005] CR2: 0000000000000020 [ 1939.559375] ---[ end trace 82d44500f28f8708 ]--- Fixes: f34c4a35d879 ("l2tp: take PMTU from tunnel UDP socket") Signed-off-by: Guillaume Nault <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-05Merge branch 'i2c/for-current' of ↵Linus Torvalds4-14/+62
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "I2C driver bugfixes for the 3.17 release. Details can be found in the commit messages, yet I think this is typical driver stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: rcar: remove spinlock" i2c: at91: add bound checking on SMBus block length bytes i2c: rk3x: fix bug that cause transfer fails in master receive mode i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer. i2c: mv64xxx: continue probe when clock-frequency is missing i2c: rcar: fix MNR interrupt handling
2014-09-05Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesKevin Hilman3-2/+12
Merge "at91: fixes for 3.17 #1" from Nicols Ferre: First AT91 fixes batch for 3.17: - compatibility string precision - clock registration and USB DT fix for at91rm9200 * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver Signed-off-by: Kevin Hilman <[email protected]>
2014-09-05bus: arm-ccn: Move event cleanup routinePawel Moll1-26/+25
The function cleaning up an initialized event was called from the "event_del" handler, instead of being used as the "destroy" callback. In case of events group allocation this caused NULL pointer dereference (as events are added and deleted multiple times then). Fixed now. Signed-off-by: Pawel Moll <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2014-09-05ipv6: fix rtnl locking in setsockopt for anycast and multicastSabrina Dubroca3-10/+31
Calling setsockopt with IPV6_JOIN_ANYCAST or IPV6_LEAVE_ANYCAST triggers the assertion in addrconf_join_solict()/addrconf_leave_solict() ipv6_sock_ac_join(), ipv6_sock_ac_drop(), ipv6_sock_ac_close() need to take RTNL before calling ipv6_dev_ac_inc/dec. Same thing with ipv6_sock_mc_join(), ipv6_sock_mc_drop(), ipv6_sock_mc_close() before calling ipv6_dev_mc_inc/dec. This patch moves ASSERT_RTNL() up a level in the call stack. Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Sabrina Dubroca <[email protected]> Reported-by: Tommi Rantala <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-05VMXNET3: Check for map error in vmxnet3_set_mcAndy King2-9/+10
We should check if the map of the table actually succeeds, and also free resources accordingly. Version bumped to 1.2.1.0 Acked-by: Shelley Gong <[email protected]> Acked-by: Bhavesh Davda <[email protected]> Signed-off-by: Andy King <[email protected]> Reported-by: Tetsuo Handa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-06ahci: add pcid for Marvel 0x9182 controllerMurali Karicheri1-0/+2
Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: [email protected]
2014-09-05Merge branch 'for-linus' of ↵Linus Torvalds3-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Wire up new syscalls getrandom and memfd_create" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up memfd_create m68k: Wire up getrandom
2014-09-05ARM: at91/dt: rm9200: fix usb clock definitionAlexandre Belloni1-1/+1
The atmel,clk-divisors property is taking 4 divisors, if less are provided, the clock registration will fail. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2014-09-05ARM: at91: rm9200: fix clock registrationAlexandre Belloni1-1/+10
Actually register clocks from device tree when using the common clock framework. Signed-off-by: Alexandre Belloni <[email protected]> Acked-by: Boris Brezillon <[email protected]> [[email protected]: add at91 to function name] Signed-off-by: Nicolas Ferre <[email protected]>
2014-09-05ARM: at91/dt: sam9g20: set at91sam9g20 pllb driverGaël PORTAY1-0/+1
The at91sam9g20 SOC uses its own pllb implementation which is different from the one inherited from at91sam9260 SOC. Signed-off-by: Gaël PORTAY <[email protected]> Acked-by: Boris Brezillon <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2014-09-05mm: memcontrol: revert use of root_mem_cgroup res_counterJohannes Weiner1-25/+78
Dave Hansen reports a massive scalability regression in an uncontained page fault benchmark with more than 30 concurrent threads, which he bisected down to 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") and pin-pointed on res_counter spinlock contention. That change relied on the per-cpu charge caches to mostly swallow the res_counter costs, but it's apparent that the caches don't scale yet. Revert memcg back to bypassing res_counters on the root level in order to restore performance for uncontained workloads. Reported-by: Dave Hansen <[email protected]> Signed-off-by: Johannes Weiner <[email protected]> Tested-by: Dave Hansen <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Vladimir Davydov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-09-05Export sync_filesystem() for modular ->remount_fs() useAnton Altaparmakov1-1/+1
This patch changes sync_filesystem() to be EXPORT_SYMBOL(). The reason this is needed is that starting with 3.15 kernel, due to Theodore Ts'o's commit 02b9984d6408 ("fs: push sync_filesystem() down to the file system's remount_fs()"), all file systems that have dirty data to be written out need to call sync_filesystem() from their ->remount_fs() method when remounting read-only. As this is now a generically required function rather than an internal only function it should be EXPORT_SYMBOL() so that all file systems can call it. Signed-off-by: Anton Altaparmakov <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-09-05Merge tag 'regulator-v3.17-rc3' of ↵Linus Torvalds8-17/+21
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator documentation fixes from Mark Brown: "All the fixes people have found for the regulator API have been documentation fixes, avoiding warnings while building the kerneldoc, fixing some errors in one of the DT bindings documents and fixing some typos in the header" * tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix kernel-doc warnings in header files regulator: Proofread documentation regulator: tps65090: Fix tps65090 typos in example
2014-09-05Merge tag 'omap-fixes-against-v3.17-rc3' of ↵Kevin Hilman317-1293/+2620
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.17-rc3" from Tony Lindgren: Few fixes for omaps mostly for various devices to get them working properly on the new am437x and dra7 hardware for several devices such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3. And also included are two minor cosmetic fixes that are not stictly fixes for the new hardware support added recently to downgrade a GPMC warning into a debug statement, and fix the confusing comments for dra7-evm spi1 mux. Note that these are all .dts changes except for a GPMC change. * tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits) ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency Linux 3.17-rc3 ... Signed-off-by: Kevin Hilman <[email protected]>
2014-09-05Merge tag 'gpio-v3.17-3' of ↵Linus Torvalds3-49/+83
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - some documentation sync - resource leak in the bt8xx driver - again fix the way varargs are used to handle the optional flags on the gpiod_* accessors. Now hopefully nailed the entire problem. * tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: move varargs hack outside #ifdef GPIOLIB gpio: bt8xx: fix release of managed resources Documentation: gpio: documentation for optional getters functions
2014-09-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-41/+90
Pull drm fixes from Dave Airlie: - i915 fixes: a few display regressions - vmwgfx: possible loop forever fix - nouveau: one userspace interface fix * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/core: don't leak oclass type bits to user drm/i915: Fix lock dropping in intel_tv_detect() drm/i915: handle G45/GM45 pulse detection connected state. drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle drm/vmwgfx: Fix an incorrect OOM return value drm/i915: Remove bogus __init annotation from DMI callbacks drm/i915: don't warn if backlight unexpectedly enabled drm/i915: Move intel_ddi_set_vc_payload_alloc(false) to haswell_crtc_disable() drm/i915: fix plane/cursor handling when runtime suspended drm/i915: Ignore VBT backlight presence check on Acer C720 (4005U)
2014-09-05usb: dwc3: fix TRB completion when multiple TRBs are startedFelipe Balbi1-7/+1
After commit 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) we created a situation where it was possible to hang a bulk/interrupt endpoint if we had more than one pending request in our queue and they were both started with a single Start Transfer command. The problems triggers because we had not enabled Transfer In Progress event for those endpoints and we were not able to process early giveback of requests completed without LST bit set. Fix the problem by finally enabling Xfer In Progress event for all endpoint types, except control. Fixes: 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Cc: <[email protected]> # v3.14+ Reported-by: Pratyush Anand <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-09-05iommu/fsl: Fix warning resulting from adding PCI device twiceVarun Sethi1-2/+8
iommu_group_get_for_dev determines the iommu group for the PCI device and adds the device to the group. In the PAMU driver we were again adding the device to the same group without checking if the device already had an iommu group. This resulted in the following warning. sysfs: cannot create duplicate filename '/devices/ffe200000.pcie/pci0000:00/0000:00:00.0/iommu_group' ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:31 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc3-00002-g7505cea-dirty #126 task: c0000001fe0a0000 ti: c0000001fe044000 task.ti: c0000001fe044000 NIP: c00000000018879c LR: c000000000188798 CTR: c00000000001ea50 REGS: c0000001fe047040 TRAP: 0700 Not tainted (3.17.0-rc3-00002-g7505cea-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad8e22 XER: 20000000 SOFTE: 1 GPR00: c000000000188798 c0000001fe0472c0 c0000000009a52e0 0000000000000065 GPR04: 0000000000000001 0000000000000000 3a30303a00000000 0000000027000000 GPR08: 2f696f6d00000000 c0000000008d3830 c0000000009b3938 c0000000009bb3d0 GPR12: 0000000028ad8e24 c00000000fff4000 c00000000000205c 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a4c70 GPR24: c0000000007e9010 c0000001fe0140a8 ffffffffffffffef 0000000000000001 GPR28: c0000001fe22ebb8 c0000000007e9010 c00000000090bf10 c0000001fe220000 NIP [c00000000018879c] .sysfs_warn_dup+0x74/0xa4 LR [c000000000188798] .sysfs_warn_dup+0x70/0xa4 Call Trace: [c0000001fe0472c0] [c000000000188798] .sysfs_warn_dup+0x70/0xa4 (unreliable) [c0000001fe047350] [c000000000188d34] .sysfs_do_create_link_sd.clone.2+0x168/0x174 [c0000001fe047400] [c0000000004b3cf8] .iommu_group_add_device+0x78/0x244 [c0000001fe0474b0] [c0000000004b6964] .fsl_pamu_add_device+0x88/0x1a8 [c0000001fe047570] [c0000000004b3960] .iommu_bus_notifier+0xdc/0x15c [c0000001fe047600] [c000000000059848] .notifier_call_chain+0x8c/0xe8 [c0000001fe0476a0] [c000000000059d04] .__blocking_notifier_call_chain+0x58/0x84 [c0000001fe047750] [c00000000036619c] .device_add+0x464/0x5c8 [c0000001fe047820] [c000000000300ebc] .pci_device_add+0x14c/0x17c [c0000001fe0478c0] [c000000000300fbc] .pci_scan_single_device+0xd0/0xf4 [c0000001fe047970] [c00000000030104c] .pci_scan_slot+0x6c/0x18c [c0000001fe047a10] [c00000000030226c] .pci_scan_child_bus+0x40/0x114 [c0000001fe047ac0] [c000000000021974] .pcibios_scan_phb+0x240/0x2c8 [c0000001fe047b70] [c00000000085a970] .pcibios_init+0x64/0xc8 [c0000001fe047c00] [c000000000001884] .do_one_initcall+0xbc/0x224 [c0000001fe047d00] [c000000000852d50] .kernel_init_freeable+0x14c/0x21c [c0000001fe047db0] [c000000000002078] .kernel_init+0x1c/0xfa4 [c0000001fe047e30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 7c7f1b79 4182001c 7fe4fb78 7f83e378 38a01000 4bffc905 60000000 7c641b78 e87e8008 7fa5eb78 48482ff5 60000000 <0fe00000> 7fe3fb78 4bf7bd39 60000000 Signed-off-by: Varun Sethi <[email protected]> Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]>
2014-09-05Merge branches 'pm-sleep', 'powercap', 'pm-domains' and 'pm-cpufreq'Rafael J. Wysocki6-22/+26
* pm-sleep: PM / sleep: Fix test_suspend= command line option * powercap: powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f * pm-domains: PM / domains: Make generic_pm_domain.name const * pm-cpufreq: cpufreq: intel_pstate: Remove unneeded variable
2014-09-05Merge branches 'acpi-video' and 'acpi-ec'Rafael J. Wysocki2-2/+47
* acpi-video: ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic * acpi-ec: ACPI / EC: Add msi quirk for Clevo W350etq
2014-09-05Merge branches 'acpica', 'acpi-processor' and 'acpi-scan'Rafael J. Wysocki3-10/+10
* acpica: ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package. * acpi-processor: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock * acpi-scan: ACPI / scan: not cache _SUN value in struct acpi_device_pnp
2014-09-05Merge remote-tracking branches 'regulator/fix/doc' and ↵Mark Brown8-17/+21
'regulator/fix/tps65090' into regulator-linus
2014-09-05crypto: drbg - remove check for uninitialized DRBG handleStephan Mueller1-3/+0
The drbg_healthcheck() contained a test to call the DRBG with an uninitialized DRBG cipher handle. As this is an inappropriate use of the kernel crypto API to try to generate random numbers before initialization, checks verifying for an initialized DRBG have been removed in previous patches. Now, the drbg_healthcheck test must also be removed. Changes V2: Added patch marker to email subject line. Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2014-09-05crypto: drbg - backport "fix maximum value checks on 32 bit systems"Herbert Xu1-0/+13
This is a backport of commit b9347aff91ce4789619168539f08202d8d6a1177. This backport is needed as without it the code will crash on 32-bit systems. The maximum values for additional input string or generated blocks is larger than 1<<32. To ensure a sensible value on 32 bit systems, return SIZE_MAX on 32 bit systems. This value is lower than the maximum allowed values defined in SP800-90A. The standard allow lower maximum values, but not larger values. SIZE_MAX - 1 is used for drbg_max_addtl to allow drbg_healthcheck_sanity to check the enforcement of the variable without wrapping. Reported-by: Stephen Rothwell <[email protected]> Reported-by: kbuild test robot <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2014-09-05Merge branch 'linux-3.17' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes single fix for nouveau. * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/core: don't leak oclass type bits to user
2014-09-04usb: usbip: fix usbip.h path in userspace toolPiotr Król2-1/+2
Fixes: 588b48caf65c ("usbip: move usbip userspace code out of staging") which introduced build failure by not changing uapi/usbip.h include path according to new location. Signed-off-by: Piotr Król <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-09-05drm/nouveau/core: don't leak oclass type bits to userBen Skeggs1-2/+2
Fixes not being able to init fence subsystem when multiple boards are present. Reported-by: Ilia Mirkin <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2014-09-04Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds1-1/+12
Pull aio bugfixes from Ben LaHaise: "Two small fixes" * git://git.kvack.org/~bcrl/aio-fixes: aio: block exit_aio() until all context requests are completed aio: add missing smp_rmb() in read_events_ring
2014-09-04aio: block exit_aio() until all context requests are completedGu Zheng1-1/+6
It seems that exit_aio() also needs to wait for all iocbs to complete (like io_destroy), but we missed the wait step in current implemention, so fix it in the same way as we did in io_destroy. Signed-off-by: Gu Zheng <[email protected]> Signed-off-by: Benjamin LaHaise <[email protected]> Cc: [email protected]
2014-09-04nohz: Restore NMI safe local irq work for local nohz kickFrederic Weisbecker2-6/+15
The local nohz kick is currently used by perf which needs it to be NMI-safe. Recent commit though (7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9) changed its implementation to fire the local kick using the remote kick API. It was convenient to make the code more generic but the remote kick isn't NMI-safe. As a result: WARNING: CPU: 3 PID: 18062 at kernel/irq_work.c:72 irq_work_queue_on+0x11e/0x140() CPU: 3 PID: 18062 Comm: trinity-subchil Not tainted 3.16.0+ #34 0000000000000009 00000000903774d1 ffff880244e06c00 ffffffff9a7f1e37 0000000000000000 ffff880244e06c38 ffffffff9a0791dd ffff880244fce180 0000000000000003 ffff880244e06d58 ffff880244e06ef8 0000000000000000 Call Trace: <NMI> [<ffffffff9a7f1e37>] dump_stack+0x4e/0x7a [<ffffffff9a0791dd>] warn_slowpath_common+0x7d/0xa0 [<ffffffff9a07930a>] warn_slowpath_null+0x1a/0x20 [<ffffffff9a17ca1e>] irq_work_queue_on+0x11e/0x140 [<ffffffff9a10a2c7>] tick_nohz_full_kick_cpu+0x57/0x90 [<ffffffff9a186cd5>] __perf_event_overflow+0x275/0x350 [<ffffffff9a184f80>] ? perf_event_task_disable+0xa0/0xa0 [<ffffffff9a01a4cf>] ? x86_perf_event_set_period+0xbf/0x150 [<ffffffff9a187934>] perf_event_overflow+0x14/0x20 [<ffffffff9a020386>] intel_pmu_handle_irq+0x206/0x410 [<ffffffff9a0b54d3>] ? arch_vtime_task_switch+0x63/0x130 [<ffffffff9a01937b>] perf_event_nmi_handler+0x2b/0x50 [<ffffffff9a007b72>] nmi_handle+0xd2/0x390 [<ffffffff9a007aa5>] ? nmi_handle+0x5/0x390 [<ffffffff9a0d131b>] ? lock_release+0xab/0x330 [<ffffffff9a008062>] default_do_nmi+0x72/0x1c0 [<ffffffff9a0c925f>] ? cpuacct_account_field+0xcf/0x200 [<ffffffff9a008268>] do_nmi+0xb8/0x100 Lets fix this by restoring the use of local irq work for the nohz local kick. Reported-by: Catalin Iacob <[email protected]> Reported-and-tested-by: Dave Jones <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]>
2014-09-04Merge tag 'davinci-fixes-for-v3.17-rc4' of ↵Arnd Bergmann1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This patch fixes setup of second EDMA channel controller on DA850. * tag 'davinci-fixes-for-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
2014-09-04ARM: dts: dra7-evm: Add vtt regulator supportLokesh Vutla1-1/+26
DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. This gpio is configured in boot loader. gpio7_11, which is only available only on Pad A22, in previous boards, is connected only to an unused pad on expansion connector EXP_P3 and is safe to be muxed as GPIO on all DRA7-evm versions (without a need to spin off another dts file). Since gpio7_11 is used to control VTT and should not be reset or kept in idle state during boot up else VTT will be disconnected and DDR gets corrupted. So, as part of this change, mark gpio7 as no-reset and no-idle on init. Signed-off-by: Lokesh Vutla <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: dra7-evm: Fix spi1 mux documentationNishanth Menon1-7/+7
While auditing the various pin ctrl configurations using the following command: grep PIN_ arch/arm/boot/dts/dra7-evm.dts|(while read line; do v=`echo "$line" | sed -e "s/\s\s*/|/g" | cut -d '|' -f1 | cut -d 'x' -f2|tr [a-z] [A-Z]`; HEX=`echo "obase=16;ibase=16;4A003400+$v"| bc`; echo "$HEX ===> $line"; done) against DRA75x/74x NDA TRM revision S(SPRUHI2S August 2014), documentation errors were found for spi1 pinctrl. Fix the same. Fixes: 6e58b8f1daaf1af ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NANDRoger Quadros1-2/+2
Both QSPI and GPMC-NAND share the same Pin (A8) from the SoC for Chip Select functionality. So both can't be enabled simultaneously. Disable QSPI node to prevent the pin conflict as well as be similar to 3.12 release. CC: Sourav Poddar <[email protected]> Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoringRoger Quadros1-4/+3
For NAND read & write wait pin monitoring must be kept disabled as the wait pin is only used to indicate NAND device ready status and not to extend each read/write cycle. So don't print a warning if wait pin is specified while read/write monitoring is not in the device tree. Sanity check wait pin number irrespective if read/write monitoring is set or not. Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoringRoger Quadros1-2/+1
NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. Add gpmc wait pin information as the NAND uses wait pin 0 for device ready indication. Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: am437x-gp-evm: Don't use read/write wait monitoringRoger Quadros1-2/+0
NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. This patch also gets rid of the below warning when NAND is accessed for the first time. omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable) Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8Roger Quadros1-1/+1
am437x-gp-evm uses a NAND chip with page size 4096 bytes and spare area of 225 bytes per page. For such a setup it is preferrable to use BCH16 ECC scheme over BCH8. This also makes it compatible with ROM code ECC scheme so we can boot with NAND after flashing from kernel. Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8Roger Quadros1-1/+1
am43x-epos-evm uses a NAND chip with page size 4096 bytes and spare area of 225 bytes per page. For such a setup it is preferrable to use BCH16 ECC scheme over BCH8. This also makes it compatible with ROM code ECC scheme so we can boot with NAND after flashing from kernel. Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Pekon Gupta <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-09-04udf: saner calling conventions for udf_new_inode()Al Viro3-43/+27
Signed-off-by: Al Viro <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2014-09-04udf: fix the udf_iget() vs. udf_new_inode() racesAl Viro2-1/+13
Currently udf_iget() (triggered by NFS) can race with udf_new_inode() leading to two inode structures with the same inode number: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. udf_new_inode(): allocate inode with that inumber udf_new_inode(): insert it into icache, set it up and dirty udf_write_inode(): write inode into buffer cache nfsd: get CPU again, look into buffer cache, see nice and sane on-disk inode, set the in-core inode from it Fix the problem by putting inode into icache in locked state (I_NEW set) and unlocking it only after it's fully set up. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2014-09-04udf: merge the pieces inserting a new non-directory object into directoryAl Viro1-69/+29
boilerplate code in udf_{create,mknod,symlink} taken to new helper symlink case converted to unique id calculated by udf_new_inode() - no point finding a new one. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2014-09-04udf: Set i_generation fieldJan Kara2-0/+2
Currently UDF doesn't initialize i_generation in any way and thus NFS can easily get reallocated inodes from stale file handles. Luckily UDF already has a unique object identifier associated with each inode - i_unique. Use that for initialization of i_generation. Signed-off-by: Jan Kara <[email protected]>
2014-09-04udf: Properly detect stale inodesJan Kara1-2/+4
NFS can easily ask for inodes that are already deleted. Currently UDF happily returns such inodes which is a bug. Return -ESTALE if udf_read_inode() is asked to read deleted inode. Signed-off-by: Jan Kara <[email protected]>
2014-09-04udf: Make udf_read_inode() and udf_iget() return errorJan Kara4-95/+96
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: Jan Kara <[email protected]>
2014-09-04Revert "i2c: rcar: remove spinlock"Sergei Shtylyov1-0/+22
This reverts commit 150b8be3cda54412ad7b54f5392b513b25c0aaa7. The I2C core's per-adapter locks can't protect from IRQs, so the driver still needs a spinlock to protect the register accesses. Signed-off-by: Sergei Shtylyov <[email protected]> Cc: [email protected] # 3.16+ Signed-off-by: Wolfram Sang <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.