Age | Commit message (Collapse) | Author | Files | Lines |
|
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")
Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.
Signed-off-by: Sriram Yagnaraman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds
skb->len, so this offset < skb->len test is redundant.
if sch->length == 0, this will end up in an infinite loop, add a check
for sch->length > 0
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Suggested-by: Florian Westphal <[email protected]>
Signed-off-by: Sriram Yagnaraman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk
MUST be accepted if the vtag of the packet matches its own tag and the
T bit is not set OR if it is set to its peer's vtag and the T bit is set
in chunk flags. Otherwise the packet MUST be silently dropped.
Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above
description.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)
This series contains updates to iavf driver only.
Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.
Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.
Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: schedule watchdog immediately when changing primary MAC
iavf: Move netdev_update_features() into watchdog task
iavf: fix temporary deadlock and failure to set MAC address
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix overlap detection in rbtree set backend: Detect overlap by going
through the ordered list of valid tree nodes. To shorten the number of
visited nodes in the list, this algorithm descends the tree to search
for an existing element greater than the key value to insert that is
greater than the new element.
2) Fix for the rbtree set garbage collector: Skip inactive and busy
elements when checking for expired elements to avoid interference
with an ongoing transaction from control plane.
This is a rather large fix coming at this stage of the 6.2-rc. Since
33c7aba0b4ff ("netfilter: nf_tables: do not set up extensions for end
interval"), bogus overlap errors in the rbtree set occur more frequently.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
My responsibilities at Intel have changed, so I'm handing off exclusive
MPTCP subsystem maintainer duties to Matthieu. It has been a privilege
to see MPTCP through its initial upstreaming and first few years in the
upstream kernel!
Acked-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Starting with commit eee16b147121 ("net: dsa: microchip: perform the
compatibility check for dev probed"), the KSZ switch driver now bails
out if it thinks the DT compatible doesn't match the actual chip ID
read back from the hardware:
ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found
KSZ8563, please fix it!
For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine
at first, because it indeed shares the same chip id as the KSZ9893.
Commit b44908095612 ("net: dsa: microchip: add separate struct
ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893
compatible chips by consulting the 0x1F register. The resulting breakage
was fixed for the SPI driver in the same commit by introducing the
appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver.
Fix this for I2C-connected KSZ8563 now to get it probing again.
Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip").
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
if (!type)
continue;
if (type > RTAX_MAX)
return false;
...
fi_val = fi->fib_metrics->metrics[type - 1];
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 5f9ae3d9e7e4 ("ipv4: do metrics match when looking up and deleting a route")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 6cf9dfd3bd62 ("net: fib: move metrics parsing to a helper")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Eric Dumazet says:
====================
netlink: annotate various data races
A recent syzbot report came to my attention.
After addressing it, I also fixed other related races.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
netlink_getsockbyportid() reads sk_state while a concurrent
netlink_connect() can change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid()
can read nlk->dst_portid and nlk->dst_group while another
thread is changing them.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzbot reminds us netlink_getname() runs locklessly [1]
This first patch annotates the race against nlk->portid.
Following patches take care of the remaining races.
[1]
BUG: KCSAN: data-race in netlink_getname / netlink_insert
write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1:
netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583
netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856
netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2476
___sys_sendmsg net/socket.c:2530 [inline]
__sys_sendmsg+0x19a/0x230 net/socket.c:2559
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0:
netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144
__sys_getsockname+0x11d/0x1b0 net/socket.c:2026
__do_sys_getsockname net/socket.c:2041 [inline]
__se_sys_getsockname net/socket.c:2038 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:2038
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xc9a49780
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7db24-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Skip interference with an ongoing transaction, do not perform garbage
collection on inactive elements. Reset annotated previous end interval
if the expired element is marked as busy (control plane removed the
element right before expiration).
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
...instead of a tree descent, which became overly complicated in an
attempt to cover cases where expired or inactive elements would affect
comparisons with the new element being inserted.
Further, it turned out that it's probably impossible to cover all those
cases, as inactive nodes might entirely hide subtrees consisting of a
complete interval plus a node that makes the current insertion not
overlap.
To speed up the overlap check, descent the tree to find a greater
element that is closer to the key value to insert. Then walk down the
node list for overlap detection. Starting the overlap check from
rb_first() unconditionally is slow, it takes 10 times longer due to the
full linear traversal of the list.
Moreover, perform garbage collection of expired elements when walking
down the node list to avoid bogus overlap reports.
For the insertion operation itself, this essentially reverts back to the
implementation before commit 7c84d41416d8 ("netfilter: nft_set_rbtree:
Detect partial overlaps on insertion"), except that cases of complete
overlap are already handled in the overlap detection phase itself, which
slightly simplifies the loop to find the insertion point.
Based on initial patch from Stefano Brivio, including text from the
original patch description too.
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Pull VFIO fixes from Alex Williamson:
- Honor reserved regions when testing for IOMMU find grained super page
support, avoiding a regression on s390 for a firmware device where
the existence of the mapping, even if unused can trigger an error
state. (Niklas Schnelle)
- Fix a deadlock in releasing KVM references by using the alternate
.release() rather than .destroy() callback for the kvm-vfio device.
(Yi Liu)
* tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio:
kvm/vfio: Fix potential deadlock on vfio group_lock
vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes, of which the first two were already in
-next when I sent out the previous PR, but they caused some issues on
non-EFI boots so I let them simmer for a bit longer.
- ensure the EFI ResetSystem and ACPI PRM calls are recognized as
users of the EFI runtime, and therefore protected against
exceptions
- account for the EFI runtime stack in the stacktrace code
- remove Matthew Garrett's MAINTAINERS entry for efivarfs"
* tag 'efi-fixes-for-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Remove Matthew Garrett as efivarfs maintainer
arm64: efi: Account for the EFI runtime stack in stack unwinder
arm64: efi: Avoid workqueue to check whether EFI runtime is live
|
|
nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.
Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <[email protected]>
Reported-by: Torkil Svensgaard <[email protected]>
Reported-by: Shachar Kagan <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Tested-by: Shachar Kagan <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21e0 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.
Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:
$ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
#define __thumb2__ 1
#define __thumb__ 1
This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:
<command-line>: warning: "__thumb2__" redefined
<built-in>: note: this is the location of the previous definition
Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1772
Reported-by: "kernelci.org bot" <[email protected]>
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Fixes: 59e2cf8d21e0 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.
This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.
The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.
Cc: [email protected]
Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <[email protected]>
Tested-by: Gergely Risko <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Vladimir Oltean say:
====================
ethtool support for IEEE 802.3 MAC Merge layer
Change log
----------
v3->v4:
- add missing opening bracket in ocelot_port_mm_irq()
- moved cfg.verify_time range checking so that it actually takes place
for the updated rather than old value
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
v2->v3:
- made get_mm return int instead of void
- deleted ETHTOOL_A_MM_SUPPORTED
- renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE
- introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE
- cleaned up documentation
- rebased on top of PLCA changes
- renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_*
v2 at:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
v1->v2:
I've decided to focus just on the MAC Merge layer for now, which is why
I am able to submit this patch set as non-RFC.
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
What is being introduced
------------------------
TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99
(interspersing of express traffic). This is controlled through ethtool
netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool
commands are posted here:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
The MAC Merge layer has its own statistics counters
(ethtool --include-statistics --show-mm swp0) as well as two member
MACs, the statistics of which can be queried individually, through a new
ethtool netlink attribute, corresponding to:
$ ethtool -I --show-pause eno2 --src aggregate
$ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac
The core properties of the MAC Merge layer are described in great detail
in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format.
Devices for which the API is supported
--------------------------------------
I decided to start with the Ethernet switch on NXP LS1028A (Felix)
because of the smaller patch set. I also have support for the ENETC
controller pending.
I would like to get confirmation that the UAPI being proposed here will
not restrict any use cases known by other hardware vendors.
Why is support for preemptible traffic classes not here?
--------------------------------------------------------
There is legitimate concern whether the 802.1Q portion of the standard
(which traffic classes go to the eMAC and which to the pMAC) should be
modeled in Linux using tc or using another UAPI. I think that is
stalling the entire series, but should be discussed separately instead.
Removing FP adminStatus support makes me confident enough to submit this
patch set without an RFC tag (meaning: I wouldn't mind if it was merged
as is).
What is submitted here is sufficient for an LLDP daemon to do its job.
I've patched openlldp to advertise and configure frame preemption:
https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3
In case someone wants to try it out, here are some commands I've used.
# Configure the interfaces to receive and transmit LLDP Data Units
lldptool -L -i eno0 adminStatus=rxtx
lldptool -L -i swp0 adminStatus=rxtx
# Enable the transmission of certain TLVs on switch's interface
lldptool -T -i eno0 -V addEthCap enableTx=yes
lldptool -T -i swp0 -V addEthCap enableTx=yes
# Query LLDP statistics on switch's interface
lldptool -S -i swp0
# Query the received neighbor TLVs
lldptool -i swp0 -t -n -V addEthCap
Additional Ethernet Capabilities TLV
Preemption capability supported
Preemption capability enabled
Preemption capability active
Additional fragment size: 60 octets
So using this patch set, lldpad will be able to advertise and configure
frame preemption, but still, no data packet will be sent as preemptible
over the link, because there is no UAPI to control which traffic classes
are sent as preemptible and which as express.
Preemptable or preemptible?
---------------------------
IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible"
throughout. Because the definition of "preemptible" falls under 802.1Q's
jurisdiction and 802.3 just references it, I went with the 802.1Q naming
even where supporting an 802.3 feature. Also, checkpatch agrees with this.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Due to the fact that the kernel-side data structures have been carried
over from the ioctl-based ethtool, we are now in the situation where we
have an ethnl_update_bool32() function, but the plain function that
operates on a boolean value kept in an actual u8 netlink attribute
doesn't exist.
With new ethtool features that are exposed solely over netlink, the
kernel data structures will use the "bool" type, so we will need this
kind of helper. Introduce it now; it's needed for things like
verify-disabled for the MAC merge configuration.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The page_pool_release_page was used when freeing rx buffers, and this
function just unmaps the page (if mapped) and does not recycle the page.
So after hundreds of down/up the eth0, the system will out of memory.
For more details, please refer to the following reproduce steps and
bug logs. To solve this issue and refer to the doc of page pool, the
page_pool_put_full_page should be used to replace page_pool_release_page.
Because this API will try to recycle the page if the page refcnt equal to
1. After testing 20000 times, the issue can not be reproduced anymore
(about testing 391 times the issue will occur on i.MX8MN-EVK before).
Reproduce steps:
Create the test script and run the script. The script content is as
follows:
LOOPS=20000
i=1
while [ $i -le $LOOPS ]
do
echo "TINFO:ENET $curface up and down test $i times"
org_macaddr=$(cat /sys/class/net/eth0/address)
ifconfig eth0 down
ifconfig eth0 hw ether $org_macaddr up
i=$(expr $i + 1)
done
sleep 5
if cat /sys/class/net/eth0/operstate | grep 'up';then
echo "TEST PASS"
else
echo "TEST FAIL"
fi
Bug detail logs:
TINFO:ENET up and down test 391 times
[ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec
[ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec
TINFO:ENET up and down test 392 times
[ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec
[ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec
[ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec
[ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec
[ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec
[ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec
[ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec
TINFO:ENET up and down test 393 times
[ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec
[ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec
[ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec
[ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec
[ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec
[ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec
[ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec
[ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec
[ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec
[ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec
[ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec
TINFO:ENET up and down test 394 times
[ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec
[ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec
[ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec
[ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0
[ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1
[ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 1537.115561] Call trace:
[ 1537.118005] dump_backtrace.part.0+0xe0/0xf0
[ 1537.122289] show_stack+0x18/0x40
[ 1537.125608] dump_stack_lvl+0x64/0x80
[ 1537.129276] dump_stack+0x18/0x34
[ 1537.132592] dump_header+0x44/0x208
[ 1537.136083] oom_kill_process+0x2b4/0x2c0
[ 1537.140097] out_of_memory+0xe4/0x594
[ 1537.143766] __alloc_pages+0xb68/0xd00
[ 1537.147521] alloc_pages+0xac/0x160
[ 1537.151013] __get_free_pages+0x14/0x40
[ 1537.154851] pgd_alloc+0x1c/0x30
[ 1537.158082] mm_init+0xf8/0x1d0
[ 1537.161228] mm_alloc+0x48/0x60
[ 1537.164368] alloc_bprm+0x7c/0x240
[ 1537.167777] do_execveat_common.isra.0+0x70/0x240
[ 1537.172486] __arm64_sys_execve+0x40/0x54
[ 1537.176502] invoke_syscall+0x48/0x114
[ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec
[ 1537.184964] do_el0_svc+0x2c/0xd0
[ 1537.188280] el0_svc+0x2c/0x84
[ 1537.191340] el0t_64_sync_handler+0xf4/0x120
[ 1537.195613] el0t_64_sync+0x18c/0x190
[ 1537.199334] Mem-Info:
[ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0
[ 1537.201620] active_file:54 inactive_file:112 isolated_file:0
[ 1537.201620] unevictable:0 dirty:0 writeback:0
[ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076
[ 1537.201620] mapped:1489 shmem:2473 pagetables:466
[ 1537.201620] sec_pagetables:0 bounce:0
[ 1537.201620] kernel_misc_reclaimable:0
[ 1537.201620] free:136672 free_pcp:96 free_cma:129241
[ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s
[ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB
[ 1537.300219] lowmem_reserve[]: 0 0 0 0
[ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB
[ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
[ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
[ 1537.358087] 2939 total pagecache pages
[ 1537.361876] 0 pages in swap cache
[ 1537.365229] Free swap = 0kB
[ 1537.368147] Total swap = 0kB
[ 1537.371065] 516096 pages RAM
[ 1537.373959] 0 pages HighMem/MovableOnly
[ 1537.377834] 17302 pages reserved
[ 1537.381103] 163840 pages cma reserved
[ 1537.384809] 0 pages hwpoisoned
[ 1537.387902] Tasks state (memory values in pages):
[ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
[ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind
[ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal
[ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd
[ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn
[ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd
[ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond
[ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon
[ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared
[ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod
[ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec
[ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd
[ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind
[ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant
[ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network
[ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand
[ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon
[ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon
[ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd
[ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod
[ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc
[ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd
[ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty
[ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login
[ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant
[ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd
[ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd
[ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam)
[ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh
[ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh
[ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor
[ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor
[ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor
[ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh
[ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/[email protected],tas0
[ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0
[ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec
Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: shenwei wang <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the scheduler doesn't use stale frequency scaling values
when latter get disabled due to a value error
- Fix a NULL pointer access on UP configs
- Use the proper locking when updating CPU capacity
* tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings
sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs
sched/fair: Fixes for capacity inversion detection
sched/uclamp: Fix a uninitialized variable warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Respect user-supplied polling value in the EDAC device code
- Fix a use-after-free issue in qcom_edac
* tag 'edac_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
EDAC/device: Respect any driver-supplied workqueue polling value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Add Emerald Rapids model support to more perf machinery
* tag 'perf_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/cstate: Add Emerald Rapids
perf/x86/intel: Add Emerald Rapids
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 writepage fix from Andreas Gruenbacher:
- Fix a regression introduced by commit "gfs2: stop using
generic_writepages in gfs2_ail1_start_one".
* tag 'gfs2-v6.2-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"
|
|
reclaim_period_ms used to be positive only but the commit 0001725d0f9b
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.
Change validation to allow only positive input.
Fixes: 0001725d0f9b ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <[email protected]>
Reported-by: Ben Gardon <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When serializing and deserializing kvm_sregs, attributes of the segment
descriptors are stored by user space. For unusable segments,
vmx_segment_access_rights skips all attributes and sets them to 0.
This means we zero out the DPL (Descriptor Privilege Level) for unusable
entries.
Unusable segments are - contrary to their name - usable in 64bit mode and
are used by guests to for example create a linear map through the
NULL selector.
VMENTER checks if SS.DPL is correct depending on the CS segment type.
For types 9 (Execute Only) and 11 (Execute Read), CS.DPL must be equal to
SS.DPL [1].
We have seen real world guests setting CS to a usable segment with DPL=3
and SS to an unusable segment with DPL=3. Once we go through an sregs
get/set cycle, SS.DPL turns to 0. This causes the virtual machine to crash
reproducibly.
This commit changes the attribute logic to always preserve attributes for
unusable segments. According to [2] SS.DPL is always saved on VM exits,
regardless of the unusable bit so user space applications should have saved
the information on serialization correctly.
[3] specifies that besides SS.DPL the rest of the attributes of the
descriptors are undefined after VM entry if unusable bit is set. So, there
should be no harm in setting them all to the previous state.
[1] Intel SDM Vol 3C 26.3.1.2 Checks on Guest Segment Registers
[2] Intel SDM Vol 3C 27.3.2 Saving Segment Registers and Descriptor-Table
Registers
[3] Intel SDM Vol 3C 26.3.2.2 Loading Guest Segment Registers and
Descriptor-Table Registers
Cc: Alexander Graf <[email protected]>
Cc: [email protected]
Signed-off-by: Hendrik Borghorst <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Placing a declaration of evt_reset is pedantically invalid
according to the C standard. While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:
x86_64/xen_shinfo_test.c:965:2: error: expected expression
struct kvm_xen_hvm_attr evt_reset = {
^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
^
Reported-by: Yu Zhang <[email protected]>
Reported-by: Sean Christopherson <[email protected]>
Fixes: a79b53aaaab5 ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Commit b2b0a5e97855 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former. Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.
Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.
With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.
Work around that by going back to how things used to work before commit
b2b0a5e97855 for now; figuring out a superior solution will take time we
don't have available right now. However ...
Since the removal of generic_writepages() is imminent, open-code it
here. We're already inside a blk_start_plug() ... blk_finish_plug()
section here, so skip that part of the original generic_writepages().
This reverts commit b2b0a5e978552e348f85ad9c7568b630a5ede659.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Acked-by: Christoph Hellwig <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.2, take #2
- Pass the correct address to mte_clear_page_tags() on initialising
a tagged page
- Plug a race against a GICv4.1 doorbell interrupt while saving
the vgic-v3 pending state.
|
|
|
|
Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
to a poll change. Normally I would've just deferred it to next week,
but since the original fix got picked up by stable, I think it's
better to just send this one off separately.
The issue is around the poll race fix, and how it mistakenly also got
applied to multishot polling. Those don't need the race fix, and we
should not be doing any reissues for that case. Exhaustive test cases
were written and committed to the liburing regression suite for the
reported issue, and additions for similar issues"
* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
io_uring/poll: don't reissue in case of poll race on multishot request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
|
|
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-lkp/[email protected]
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <[email protected]>
Cc: Andreas Dilger <[email protected]>
Cc: Theodore Ts'o <[email protected]>,
Cc: Jason Donenfeld <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <[email protected]>
Tested-by: Jordy Zomer <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.
This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?
If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.
While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.
It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.
Fixes: f66b7b151e00 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit d77e59a8fccd ("arm64: mte: Lock a page for MTE tag
initialisation") added a call to mte_clear_page_tags() in case a
prior mte_copy_tags_from_user() failed in order to avoid stale tags in
the guest page (it should have really been a separate commit).
Unfortunately, the argument passed to this function was the address of
the struct page rather than the actual page address. Fix this function
call.
Fixes: d77e59a8fccd ("arm64: mte: Lock a page for MTE tag initialisation")
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Marc Zyngier <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Anshuman Khandual <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If net_assign_generic() fails, the current error path in ops_init() tries
to clear the gen pointer slot. Anyway, in such error path, the gen pointer
itself has not been modified yet, and the existing and accessed one is
smaller than the accessed index, causing an out-of-bounds error:
BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320
Write of size 8 at addr ffff888109124978 by task modprobe/1018
CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9f
print_address_description.constprop.0+0x86/0x2b5
print_report+0x11b/0x1fb
kasan_report+0x87/0xc0
ops_init+0x2de/0x320
register_pernet_operations+0x2e4/0x750
register_pernet_subsys+0x24/0x40
tcf_register_action+0x9f/0x560
do_one_initcall+0xf9/0x570
do_init_module+0x190/0x650
load_module+0x1fa5/0x23c0
__do_sys_finit_module+0x10d/0x1b0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f42518f778d
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48
89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d
RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003
RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000
</TASK>
This change addresses the issue by skipping the gen pointer
de-reference in the mentioned error-path.
Found by code inspection and verified with explicit error injection
on a kasan-enabled kernel.
Fixes: d266935ac43d ("net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/cec4e0f3bb2c77ac03a6154a8508d3930beb5f0f.1674154348.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If one of ports in the ethernet-ports was disabled, this driver
failed to probe all ports. So, fix it.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The PCI and queue number info is missing in IRQ names.
Add PCI and queue number to IRQ names, to allow CPU affinity
tuning scripts to work.
Cc: [email protected]
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Most netlink attributes are parsed and validated from
__nla_validate_parse() or validate_nla()
u16 type = nla_type(nla);
if (type == 0 || type > maxtype) {
/* error or continue */
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.
This should take care of vast majority of netlink uses,
but an audit is needed to take care of others where
validation is not yet centralized in core netlink functions.
Fixes: bfa83a9e03cf ("[NETLINK]: Type-safe netlink messages/attributes interface")
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|