aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-05-24Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linuxLinus Torvalds11-72/+90
Pull nfsd updates from Bruce Fields: "A very quiet cycle for nfsd, mainly just an RDMA update from Chuck Lever" * tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux: sunrpc: fix stripping of padded MIC tokens svcrpc: autoload rdma module svcrdma: Generalize svc_rdma_xdr_decode_req() svcrdma: Eliminate code duplication in svc_rdma_recvfrom() svcrdma: Drain QP before freeing svcrdma_xprt svcrdma: Post Receives only for forward channel requests svcrdma: Remove superfluous line from rdma_read_chunks() svcrdma: svc_rdma_put_context() is invoked twice in Send error path svcrdma: Do not add XDR padding to xdr_buf page vector svcrdma: Support IPv6 with NFS/RDMA nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid Remove unnecessary allocation
2016-05-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds28-313/+364
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Fix a number of bugs, most notably a potential stale data exposure after a crash and a potential BUG_ON crash if a file has the data journalling flag enabled while it has dirty delayed allocation blocks that haven't been written yet. Also fix a potential crash in the new project quota code and a maliciously corrupted file system. In addition, fix some DAX-specific bugs, including when there is a transient ENOSPC situation and races between writes via direct I/O and an mmap'ed segment that could lead to lost I/O. Finally the usual set of miscellaneous cleanups" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: pre-zero allocated blocks for DAX IO ext4: refactor direct IO code ext4: fix race in transient ENOSPC detection ext4: handle transient ENOSPC properly for DAX dax: call get_blocks() with create == 1 for write faults to unwritten extents ext4: remove unmeetable inconsisteny check from ext4_find_extent() jbd2: remove excess descriptions for handle_s ext4: remove unnecessary bio get/put ext4: silence UBSAN in ext4_mb_init() ext4: address UBSAN warning in mb_find_order_for_block() ext4: fix oops on corrupted filesystem ext4: fix check of dqget() return value in ext4_ioctl_setproject() ext4: clean up error handling when orphan list is corrupted ext4: fix hang when processing corrupted orphaned inode list ext4: remove trailing \n from ext4_warning/ext4_error calls ext4: fix races between changing inode journal mode and ext4_writepages ext4: handle unwritten or delalloc buffers before enabling data journaling ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart() ext4: do not ask jbd2 to write data for delalloc buffers jbd2: add support for avoiding data writes during transaction commits ...
2016-05-24ARM: lpc32xx: fix NR_IRQS confictArnd Bergmann1-1/+1
With the change to sparse IRQs, the lpc32xx platform gets a warning about conflicting macros: In file included from arch/arm/mach-lpc32xx/irq.c:31:0: arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined #define NR_IRQS 96 arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition #define NR_IRQS NR_IRQS_LEGACY One such instance was in the old irq driver that is now removed by the previous patch, but any other file including mach/irqs.h still has the issue. Since none of them use this constant, we can just remove the old definition. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver")
2016-05-24ARM: lpc32xx: remove legacy irq controller driverVladimir Zapolskiy2-478/+1
New NXP LPC32xx irq chip driver is used instead of a legacy one. [this also fixes a harmless build warning about the NR_IRQS redefinition] Signed-off-by: Vladimir Zapolskiy <[email protected]> Acked-by: Sylvain Lemieux <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2016-05-24IB/core: Add IP to GID netlink offloadMark Bloch3-24/+198
There is an assumption that rdmacm is used only between nodes in the same IB subnet, this why ARP resolution can be used to turn IP to GID in rdmacm. When dealing with IB communication between subnets this assumption is no longer valid. ARP resolution will get us the next hop device address and not the peer node's device address. To solve this issue, we will check user space if it can provide the GID of the peer node, and fail if not. We add a sequence number to identify each request and fill in the GID upon answer from userspace. Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24IB/core: Register SA ibnl client during ib_core initializationMark Bloch3-22/+38
Move SA ibnl client registration to ib_core module init. This will allow us to register a single client to handle all RDMA_NL_LS operations and make it SA independent. Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24IB/netlink: Add a new local service operationMark Bloch1-0/+10
This commits adds a new RDMA local service operation: - IP to GID resolution. The client request would include the ifindex of the outgoing interface and would place in an attribute (LS_NLA_TYPE_IPV4 or LS_NLA_TYPE_IPV6) the destnation IP. The local service would answer with a message that has the attribute: - LS_NLA_TYPE_DGID - The destination GID. Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24IB/SA: Integrate ib_sa module into ib_core moduleMark Bloch4-15/+17
Consolidate ib_sa into ib_core, this commit eliminates ib_sa.ko and makes it part of ib_core.ko Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24IB/MAD: Integrate ib_mad module into ib_core moduleMark Bloch4-14/+18
Consolidate ib_mad into ib_core, this commit eliminates ib_mad.ko and makes it part of ib_core.ko Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24IB/core: Integrate IB address resolution module into coreLeon Romanovsky4-13/+16
IB address resolution is declared as a module (ib_addr.ko) which loads itself before IB core module (ib_core.ko). It causes to the scenario where IB netlink which is initialized by IB core can't be used by ib_addr.ko. In order to solve it, we are converting ib_addr.ko to be part of IB core module. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24Merge tag 'spi-v4.7' of ↵Linus Torvalds27-288/+2033
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Another quiet release for SPI, almost entirely driver specific changes with the diffstat dominated by two new drivers which are about two thirds of it in terms of lines of code: - new drivers for PIC32 standard and SQI controllers - the Cadence driver has had runtime PM support added and quite a few fixes and cleanups - flash-specific accelerated path support now has a feature query interface - the pxa2xx driver has been moved to use the core DMA mapping support" * tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits) spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops' spi: dw-pci: Spelling s/paltforms/platforms/g spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup spi: Fix simple typo s/impelment/implement spi: rockchip: potential NULL dereference on error spi: zynqmp: disable clocks in error paths spi: Drop unnecessary dependencies on relaxed I/O accessors spi: qup: Add spi_master_put in remove function spi: qup: Handle clocks in pm_runtime suspend and resume spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths spi: st-ssc4: Allow compile test build spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel spi: davinci: Use dma_request_chan() for requesting DMA channel spi: pic32: Fix checking return value of devm_ioremap_resource spi: spi-fsl-dspi: Update DT binding documentation spi: Drop duplicate code to set master->dev.parent spi: pic32: Set proper bits_per_word_mask spi: return error if kmap'd buffers passed to spi_map_buf() spi: core: add hook flash_read_supported to spi_master spi: pic32-sqi: silence array overflow warning ...
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds89-2908/+4338
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-24Merge tag 'for-linus-4.7-rc0-tag' of ↵Linus Torvalds6-47/+40
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel. * tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: use same main loop for counting and remapping pages xen/events: Don't move disabled irqs xen/x86: actually allocate legacy interrupts on PV guests Xen: don't warn about 2-byte wchar_t in efi xen/gntdev: reduce copy batch size to 16 xen/x86: don't lose event interrupts
2016-05-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds5-11/+67
Pull virtio updates from Michael Tsirkin: "Looks like a quiet cycle for virtio. There's a new inorder option for the ringtest tool, and a bugfix for balloon for ppc platforms when using virtio 1 mode" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: ringtest: pass buf != NULL virtio_balloon: fix PFN format for virtio-1 virtio: add inorder option
2016-05-24Merge tag 'nios2-v4.7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 update from Ley Foon Tan: - add order-only DTC dependency to %.dtb target - fix libgcc location detection * tag 'nios2-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Add order-only DTC dependency to %.dtb target nios2: Fix libgcc location detection
2016-05-24Merge tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds4-1/+9
Pull Microblaze updates from Michal Simek: - Wire-up new syscalls - Fix link error * tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: pci: export isa_io_base to fix link errors microblaze: Wire up userfaultfd, membarrier, mlock2 syscalls
2016-05-24spi: spi-ep93xx: Fix the PTR_ERR() argumentFabio Estevam1-1/+1
PTR_ERR should access the value just tested by IS_ERR. The semantic patch that makes this change is available in scripts/coccinelle/tests/odd_ptr_err.cocci. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-05-24RDMA/cxgb3: device driver frees DMA memory with different sizeHonggang Li1-1/+1
[ 598.852037] ------------[ cut here ]------------ [ 598.856698] WARNING: at lib/dma-debug.c:887 check_unmap+0xf8/0x920() [ 598.863079] cxgb3 0000:01:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000003310000] [map size=17 bytes] [unmap size=16 bytes] [ 598.878265] Modules linked in: xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad kvm_amd kvm ipmi_devintf ipmi_ssif dcdbas pcspkr ipmi_si sg ipmi_msghandler acpi_power_meter amd64_edac_mod shpchp edac_core sp5100_tco k10temp edac_mce_amd i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ata_generic iw_cxgb3 pata_acpi ib_core ib_addr mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm pata_atiixp drm ahci libahci serio_raw i2c_core cxgb3 libata bnx2 mdio dm_mirror dm_region_hash dm_log dm_mod [ 598.946822] CPU: 3 PID: 11820 Comm: cmtime Not tainted 3.10.0-327.el7.x86_64.debug #1 [ 598.954681] Hardware name: Dell Inc. PowerEdge R415/0GXH08, BIOS 2.0.2 10/22/2012 [ 598.962193] ffff8808077479a8 000000000381a432 ffff880807747960 ffffffff81700918 [ 598.969663] ffff880807747998 ffffffff8108b6c0 ffff880807747a80 ffff8808063f55c0 [ 598.977132] ffffffff833ca850 0000000000000282 ffff88080b1bb800 ffff880807747a00 [ 598.984602] Call Trace: [ 598.987062] [<ffffffff81700918>] dump_stack+0x19/0x1b [ 598.992224] [<ffffffff8108b6c0>] warn_slowpath_common+0x70/0xb0 [ 598.998254] [<ffffffff8108b75c>] warn_slowpath_fmt+0x5c/0x80 [ 599.004033] [<ffffffff813903b8>] check_unmap+0xf8/0x920 [ 599.009369] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ 599.014702] [<ffffffff81390cee>] debug_dma_free_coherent+0x7e/0xa0 [ 599.021008] [<ffffffffa01ece2c>] cxio_destroy_cq+0xcc/0x160 [iw_cxgb3] [ 599.027654] [<ffffffffa01e8da0>] iwch_destroy_cq+0xf0/0x140 [iw_cxgb3] [ 599.034307] [<ffffffffa01c4bfe>] ib_destroy_cq+0x1e/0x30 [ib_core] [ 599.040601] [<ffffffffa04ff2d2>] ib_uverbs_close+0x302/0x4d0 [ib_uverbs] [ 599.047417] [<ffffffff812335a2>] __fput+0x102/0x310 [ 599.052401] [<ffffffff8123388e>] ____fput+0xe/0x10 [ 599.057297] [<ffffffff810bbde4>] task_work_run+0xb4/0xe0 [ 599.062719] [<ffffffff81092a84>] do_exit+0x304/0xc60 [ 599.067789] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ 599.073820] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ 599.079153] [<ffffffff8170a49c>] ? _raw_spin_unlock_irq+0x2c/0x50 [ 599.085358] [<ffffffff8109346c>] do_group_exit+0x4c/0xc0 [ 599.090779] [<ffffffff810a8661>] get_signal_to_deliver+0x2e1/0x960 [ 599.097071] [<ffffffff8101c497>] do_signal+0x57/0x6e0 [ 599.102229] [<ffffffff81714bd1>] ? sysret_signal+0x5/0x4e [ 599.107738] [<ffffffff8101cb7f>] do_notify_resume+0x5f/0xb0 [ 599.113418] [<ffffffff81714e7d>] int_signal+0x12/0x17 [ 599.118576] ---[ end trace 1e4653102e7e7019 ]--- [ 599.123211] Mapped at: [ 599.125577] [<ffffffff8138ed8b>] debug_dma_alloc_coherent+0x2b/0x80 [ 599.131968] [<ffffffffa01ec862>] cxio_create_cq+0xf2/0x1f0 [iw_cxgb3] [ 599.139920] [<ffffffffa01e9c05>] iwch_create_cq+0x105/0x4e0 [iw_cxgb3] [ 599.147895] [<ffffffffa0500584>] create_cq.constprop.14+0x184/0x2e0 [ib_uverbs] [ 599.156649] [<ffffffffa05027fb>] ib_uverbs_create_cq+0x10b/0x140 [ib_uverbs] Fixes: b955150ea784 ('RDMA/cxgb3: When a user QP is marked in error, also mark the CQs in error') Signed-off-by: Honggang Li <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: Steve Wise <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2016-05-24MAINTAINERS: mark bcache as orphanJiri Kosina1-1/+1
The submitted patches are not being reacted upon, and Jens is only picking up stable fixes on an rather ad-hoc basis. Link: lkml.kernel.org/r/[email protected] Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2016-05-24bcache: bch_gc_thread() is not freezableJiri Kosina1-2/+0
bch_gc_thread() doesn't mark itself freezable, so calling try_to_freeze() in its context is just an expensive no-op. Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2016-05-24bcache: bch_allocator_thread() is not freezableJiri Kosina1-2/+0
bch_allocator_thread() is calling try_to_freeze(), but that's just an expensive no-op given the fact that the thread is not marked freezable. Bucket allocator has to be up and running to the very last stages of the suspend, as the bcache I/O that's in flight (think of writing an hibernation image to a swap device served by bcache). Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2016-05-24bcache: bch_writeback_thread() is not freezableJiri Kosina1-3/+0
bch_writeback_thread() is calling try_to_freeze(), but that's just an expensive no-op given the fact that the thread is not marked freezable. I/O helper kthreads, exactly such as the bcache writeback thread, actually shouldn't be freezable, because they are potentially necessary for finalizing the image write-out. Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2016-05-24ALSA: hda/realtek - Add support for ALC295/ALC3254Kailang Yang1-0/+10
Add support for ALC295/ALC3254. They are simply compatible with ALC225 chip. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-05-24ubifs: ubifs_dump_inode: Fix dumping field bulk_readAndreas Gruenbacher1-1/+1
The wrong field (xattr) is dumped here due to a copy-and-paste error. Signed-off-by: Andreas Gruenbacher <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Fix static volume checks when Fastmap is usedRichard Weinberger3-2/+22
Ezequiel reported that he's facing UBI going into read-only mode after power cut. It turned out that this behavior happens only when updating a static volume is interrupted and Fastmap is used. A possible trace can look like: ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012 0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841 ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6 ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0 Call Trace: [<ffffffff8140d841>] dump_stack+0x63/0x82 [<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi] [<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi] [<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi] [<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi] [<ffffffff8124b08e>] chrdev_open+0xae/0x1d0 [<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300 [<ffffffff8124afe0>] ? cdev_put+0x30/0x30 [<ffffffff81244d36>] vfs_open+0x56/0x60 [<ffffffff812545f4>] path_openat+0x4f4/0x1190 [<ffffffff81256621>] do_filp_open+0x91/0x100 [<ffffffff81263547>] ? __alloc_fd+0xc7/0x190 [<ffffffff812450df>] do_sys_open+0x13f/0x210 [<ffffffff812451ce>] SyS_open+0x1e/0x20 [<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 UBI checks static volumes for data consistency and reads the whole volume upon first open. If the volume is found erroneous users of UBI cannot read from it, but another volume update is possible to fix it. The check is performed by running ubi_eba_read_leb() on every allocated LEB of the volume. For static volumes ubi_eba_read_leb() computes the checksum of all data stored in a LEB. To verify the computed checksum it has to read the LEB's volume header which stores the original checksum. If the volume header is not found UBI treats this as fatal internal error and switches to RO mode. If the UBI device was attached via a full scan the assumption is correct, the volume header has to be present as it had to be there while scanning to get known as mapped. If the attach operation happened via Fastmap the assumption is no longer correct. When attaching via Fastmap UBI learns the mapping table from Fastmap's snapshot of the system state and not via a full scan. It can happen that a LEB got unmapped after a Fastmap was written to the flash. Then UBI can learn the LEB still as mapped and accessing it returns only 0xFF bytes. As UBI is not a FTL it is allowed to have mappings to empty PEBs, it assumes that the layer above takes care of LEB accounting and referencing. UBIFS does so using the LEB property tree (LPT). For static volumes UBI blindly assumes that all LEBs are present and therefore special actions have to be taken. The described situation can happen when updating a static volume is interrupted, either by a user or a power cut. The volume update code first unmaps all LEBs of a volume and then writes LEB by LEB. If the sequence of operations is interrupted UBI detects this either by the absence of LEBs, no volume header present at scan time, or corrupted payload, detected via checksum. In the Fastmap case the former method won't trigger as no scan happened and UBI automatically thinks all LEBs are present. Only by reading data from a LEB it detects that the volume header is missing and incorrectly treats this as fatal error. To deal with the situation ubi_eba_read_leb() from now on checks whether we attached via Fastmap and handles the absence of a volume header like a data corruption error. This way interrupted static volume updates will correctly get detected also when Fastmap is used. Cc: <[email protected]> Reported-by: Ezequiel Garcia <[email protected]> Tested-by: Ezequiel Garcia <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Set free_count to zero before walking through erase listHeiko Schocher1-1/+1
Set free_count to zero before walking through ai->erase list in wl_init(). Found in U-Boot as U-Boot has no workqueue/threads, it immediately calls erase_worker(), which increase for each erased block free_count. Without this patch, free_count gets after this initialized to zero in wl_init(), so the free_count variable always has the maybe wrong value 0 in U-Boot. Signed-off-by: Heiko Schocher <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Silence an unintialized variable warningDan Carpenter1-1/+2
My static checker complains that "val" is uninitialized when kstrtoint() fails. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Clean up return in ubi_remove_volume()Dan Carpenter1-1/+1
My static checker says that "err" can be uninitialized if "vol->reserved_pebs" is <= 0. I don't think that can happen but returning a literal is cleaner anyway. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Modify wrong comment in ubi_leb_map function.z001895121-1/+1
Signed-off-by: z00189512 <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Don't read back all data in ubi_eba_copy_leb()Richard Weinberger1-26/+0
Drop this paranoia check from the old days. If our MTD driver or the flash is so bad that we even cannot trust it to write data we have bigger problems. If one really does not trust the flash and wants write-verify she can enable UBI io checks using debugfs. Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24UBI: Add ro-mode sysfs attributeEzequiel Garcia2-0/+14
On serious situations, UBI may detect serious device corruption, and switch to read-only mode to protect the data and allow debugging. This commit exposes this ro-mode on sysfs, so it can be obtained by userspace tools. Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2016-05-24xen: use same main loop for counting and remapping pagesJuergen Gross1-39/+26
Instead of having two functions for cycling through the E820 map in order to count to be remapped pages and remap them later, just use one function with a caller supplied sub-function called for each region to be processed. This eliminates the possibility of a mismatch between both loops which showed up in certain configurations. Suggested-by: Ed Swierk <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Cc: <[email protected]> Signed-off-by: David Vrabel <[email protected]>
2016-05-24xen/events: Don't move disabled irqsRoss Lagerwall1-2/+4
Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded irq_move_irq() but left out checking if the IRQ is disabled. This broke resuming from suspend since it tries to move a (disabled) irq without holding the IRQ's desc->lock. Fix it by adding in a check for disabled IRQs. The resulting stacktrace was: kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31! invalid opcode: 0000 [#1] SMP Modules linked in: xenfs xen_privcmd ... CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016 task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000 RIP: 0010:[<ffffffff810e26e2>] [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0 RSP: 0018:ffff88003d7bfc50 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8 RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000 R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0 R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66 Call Trace: [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160 [<ffffffff810a3830>] ? sort_range+0x30/0x30 [<ffffffff810a0588>] kthread+0xd8/0xf0 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 Signed-off-by: Ross Lagerwall <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Cc: <[email protected]> Signed-off-by: David Vrabel <[email protected]>
2016-05-24xen/x86: actually allocate legacy interrupts on PV guestsStefano Stabellini1-2/+5
b4ff8389ed14 is incomplete: relies on nr_legacy_irqs() to get the number of legacy interrupts when actually nr_legacy_irqs() returns 0 after probe_8259A(). Use NR_IRQS_LEGACY instead. Signed-off-by: Stefano Stabellini <[email protected]> CC: [email protected]
2016-05-24Xen: don't warn about 2-byte wchar_t in efiArnd Bergmann1-0/+1
The XEN UEFI code has become available on the ARM architecture recently, but now causes a link-time warning: ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail This seems harmless, because the efi code only uses 2-byte characters when interacting with EFI, so we don't pass on those strings to elsewhere in the system, and we just need to silence the warning. It is not clear to me whether we actually need to build the file with the -fshort-wchar flag, but if we do, then we should also pass --no-wchar-size-warning to the linker, to avoid the warning. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")
2016-05-24xen/gntdev: reduce copy batch size to 16David Vrabel1-1/+1
IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number of hypercalls. The stack is used to avoid a memory allocation in a hot path. However, a batch size of 24 requires more than 1024 bytes of stack which in some configurations causes a compiler warning. xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’: xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is larger than 1024 bytes [-Wframe-larger-than=] This is a harmless warning as there is still plenty of stack spare, but people keep trying to "fix" it. Reduce the batch size to 16 to reduce stack usage to less than 1024 bytes. This should have minimal impact on performance. Signed-off-by: David Vrabel <[email protected]>
2016-05-24xen/x86: don't lose event interruptsStefano Stabellini1-3/+3
On slow platforms with unreliable TSC, such as QEMU emulated machines, it is possible for the kernel to request the next event in the past. In that case, in the current implementation of xen_vcpuop_clockevent, we simply return -ETIME. To be precise the Xen returns -ETIME and we pass it on. However the result of this is a missed event, which simply causes the kernel to hang. Instead it is better to always ask the hypervisor for a timer event, even if the timeout is in the past. That way there are no lost interrupts and the kernel survives. To do that, remove the VCPU_SSHOTTMR_future flag. Signed-off-by: Stefano Stabellini <[email protected]> Acked-by: Juergen Gross <[email protected]>
2016-05-24KVM: SVM: Add more SVM_EXIT_REASONSJan Kiszka1-3/+41
Useful when tracing nested setups where the guest may trigger more than the host usually does. But even some typical host exits were missing. Signed-off-by: Jan Kiszka <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2016-05-24KVM: Unify traced vector formatJan Kiszka1-3/+3
Specifically the change from hex to decimal helps correlating events. Signed-off-by: Jan Kiszka <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2016-05-24svm: bitwise vs logical op typoDan Carpenter1-2/+2
These were supposed to be a bitwise operation but there is a typo. The result is mostly harmless, but sparse correctly complains. Fixes: 44a95dae1d22 ('KVM: x86: Detect and Initialize AVIC support') Fixes: 18f40c53e10f ('svm: Add VMEXIT handlers for AVIC') Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2016-05-24Merge tag 'kvm-arm-for-4-7-take2' of ↵Paolo Bonzini34-156/+4404
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM Changes for v4.7 take 2 "The GIC is dead; Long live the GIC" This set of changes include the new vgic, which is a reimplementation of our horribly broken legacy vgic implementation. The two implementations will live side-by-side (with the new being the configured default) for one kernel release and then we'll remove it. Also fixes a non-critical issue with virtual abort injection to guests.
2016-05-24Merge tag 'perf-core-for-mingo-20160523' of ↵Ingo Molnar12-164/+319
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements from Arnaldo Carvalho de Melo: User visible changes: - Add "srcline_from" and "srcline_to" branch sort keys to 'perf top' and 'perf report' (Andi Kleen) Infrastructure changes: - Make 'perf trace' auto-attach fd->name and ptr->name beautifiers based on the name of syscall arguments, this way new syscalls that have 'const char * (path,pathname,filename)' will use the fd->name beautifier (vfs_getname perf probe, if in place) and the 'fd->name' (vfs_getname or via /proc/PID/fd/) (Arnaldo Carvalho de Melo) - Infrastructure to read from a ring buffer in backward write mode (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2016-05-24headers_check: don't warn about c++ guardsArnd Bergmann1-0/+4
A recent addition to the DRM tree for 4.7 added 'extern "C"' guards for c++ to all the DRM headers, and that now causes warnings in 'make headers_check': usr/include/drm/amdgpu_drm.h:38: userspace cannot reference function or variable defined in the kernel usr/include/drm/drm.h:63: userspace cannot reference function or variable defined in the kernel usr/include/drm/drm.h:699: userspace cannot reference function or variable defined in the kernel usr/include/drm/drm_fourcc.h:30: userspace cannot reference function or variable defined in the kernel usr/include/drm/drm_mode.h:33: userspace cannot reference function or variable defined in the kernel usr/include/drm/drm_sarea.h:38: userspace cannot reference function or variable defined in the kernel usr/include/drm/exynos_drm.h:21: userspace cannot reference function or variable defined in the kernel usr/include/drm/i810_drm.h:7: userspace cannot reference function or variable defined in the kernel This changes the headers_check.pl script to not warn about this. I'm listing the merge commit as introducing the problem, because there are several patches in this branch that each do this for one file. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: 7c10ddf87472 ("Merge branch 'drm-uapi-extern-c-fixes' of https://github.com/evelikov/linux into drm-next") Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-05-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds129-786/+1355
Merge yet more updates from Andrew Morton: - Oleg's "wait/ptrace: assume __WALL if the child is traced". It's a kernel-based workaround for existing userspace issues. - A few hotfixes - befs cleanups - nilfs2 updates - sys_wait() changes - kexec updates - kdump - scripts/gdb updates - the last of the MM queue - a few other misc things * emailed patches from Andrew Morton <[email protected]>: (84 commits) kgdb: depends on VT drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable drm/radeon: make radeon_mn_get wait for mmap_sem killable drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable uprobes: wait for mmap_sem for write killable prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable exec: make exec path waiting for mmap_sem killable aio: make aio_setup_ring killable coredump: make coredump_wait wait for mmap_sem for write killable vdso: make arch_setup_additional_pages wait for mmap_sem for write killable ipc, shm: make shmem attach/detach wait for mmap_sem killable mm, fork: make dup_mmap wait for mmap_sem for write killable mm, proc: make clear_refs killable mm: make vm_brk killable mm, elf: handle vm_brk error mm, aout: handle vm_brk failures mm: make vm_munmap killable mm: make vm_mmap killable mm: make mmap_sem for write waits killable for mm syscalls MAINTAINERS: add co-maintainer for scripts/gdb ...
2016-05-23Merge tag 'linux-kselftest-4.7-rc1' of ↵Linus Torvalds3-3/+80
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update for Kselftest adds: - a new ftrace testcase - fixes for ftrace and intel_pstate tests" * tag 'linux-kselftest-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: testing: define the _GNU_SOURCE macro kselftests/ftrace: Add a test case for event pid filtering kselftests/ftrace: Detect tracefs mount point
2016-05-23Merge tag 'trace-v4.7-3' of ↵Linus Torvalds1-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Reviewing the selftest I recently submitted, I realize that the second part of it uses my old hack to get the PID of the spawned background tasks, which doesn't work for all shells, instead of the common use of $!" * tag 'trace-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Use proper logic to find process PID
2016-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds7-50/+50
Pull arch/tile updates from Chris Metcalf: "This is an even quieter cycle than usual" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: Fix typo Fix typo Fix typo tile: sort the "select" lines in the TILE/TILEGX configs tile: clarify barrier semantics of atomic_add_return tile/defconfigs: Remove CONFIG_IPV6_PRIVACY
2016-05-23Merge branch 'for-4.7-dw' of ↵Linus Torvalds3-274/+306
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata sata_dwc_460ex updates from Tejun Heo: "Patches to bring sata_dwc_460ex up to snuff. It was a separate pull request because it depends on dmaengine dw platform changes which are now in mainline" * 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits) ata: dwc: add DMADEVICES dependency powerpc/4xx: Device tree update for the 460ex DWC SATA ata: sata_dwc_460ex: make debug messages neat ata: sata_dwc_460ex: supply physical address of FIFO to DMA ata: sata_dwc_460ex: use devm_ioremap ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr() ata: sata_dwc_460ex: use readl/writel_relaxed() ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API ata: sata_dwc_460ex: add __iomem to register base pointer ata: sata_dwc_460ex: get rid of incorrect cast ata: sata_dwc_460ex: get rid of some pointless casts ata: sata_dwc_460ex: remove empty libata callback ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros ata: sata_dwc_460ex: get rid of global data ata: sata_dwc_460ex: add phy support ata: sata_dwc_460ex: use "dmas" DT property to find dma channel ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands ata: sata_dwc_460ex: skip dma setup for non-dma commands ata: sata_dwc_460ex: select only core part of DMA driver ata: sata_dwc_460ex: DMA is always a flow controller ...
2016-05-23Merge branch 'for-4.7-zac' of ↵Linus Torvalds17-181/+1179
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata ZAC support from Tejun Heo: "This contains Zone ATA Command support for Shingled Magnetic Recording devices. In addition to sending the new commands down to the device, as ZAC commands depend on getting a lot of responses from the device, piping up responses is beefed up too. However, it doesn't involve changes to libata core mechanism or its interaction with upper layers, so I'm not expecting too many fallouts. Kudos to Hannes for driving SMR support" * 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits) libata: support host-aware and host-managed ZAC devices libata: support device-managed ZAC devices libata: NCQ encapsulation for ZAC MANAGEMENT OUT libata: Implement ZBC OUT translation libata: implement ZBC IN translation libata: fixup ZAC device disabling libata-scsi: Generate sense code for disabled devices libata-trace: decode subcommands libata: Check log page directory before accessing pages libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT libata: Separate out ata_dev_config_ncq_send_recv() libata/libsas: Define ATA_CMD_NCQ_NON_DATA libsas: enable FPDMA SEND/RECEIVE libata: do not attempt to retrieve sense code twice libata-scsi: Set information sense field for invalid parameter libata-scsi: set bit pointer for sense code information libata-scsi: Set field pointer in sense code scsi: add scsi_set_sense_field_pointer() libata: Implement control mode page to select sense format libata-scsi: generate correct ATA pass-through sense ...
2016-05-23Merge branch 'for-linus' of ↵Linus Torvalds2-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull more security subsystem updates from James Morris: "Minor updates for the keys code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: MAINTAINERS: Update keyrings record and add asymmetric keys record lib: asn1_decoder - add MODULE_LICENSE("GPL") KEYS: The PKCS#7 test key type should use the secondary keyring
Powered by cgit, Gruvboxed by Blaster4385.