aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-11-23drm: rcar-du: Reject modes that fail CRTC timing requirementsLaurent Pinchart1-0/+12
The hardware requires the HDSR and VDSR registers to be set to 1 or higher. This translates to a minimum combined horizontal sync and back porch of 20 pixels and a minimum vertical back porch of 3 lines. Reject modes that fail those requirements. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Kieran Bingham <[email protected]>
2018-11-23drm: rcar-du: Fix external clock error checksLaurent Pinchart1-5/+9
The rcar-du driver supports probe deferral for external clocks, but implements it badly by checking the wrong pointer due to a bad copy and paste. Fix it. While at it, reject invalid clocks outright for DU channels that have a display PLL, as the external clock is mandatory in that case. This avoids a WARN_ON() at runtime. Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock") Reported-by: Kuninori Morimoto <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Kieran Bingham <[email protected]>
2018-11-23drm: rcar-du: Enable alpha property on primary planesKieran Bingham1-1/+2
The hardware supports alpha on all planes, and using it on the primary plane can be useful. Don't restrict the alpha property to overlay planes. Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm: rcar-du: lvds: Add R8A77965 supportLaurent Pinchart1-0/+1
Add support for the R-Car M3-N (R8A77965) SoC to the LVDS encoder driver. The encoder appears identical to the M3-W version, we can thus simply point to the generic Gen3 data. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Kieran Bingham <[email protected]>
2018-11-23dt-bindings: display: renesas: lvds: Document r8a77965 bindingsLaurent Pinchart1-0/+1
The M3-N (r8a77965) includes one LVDS encoder. Extend the binding to support it. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Kieran Bingham <[email protected]>
2018-11-23drm: rcar-du: Fix vblank initializationLaurent Pinchart1-1/+1
The drm_vblank_init() takes the total number of CRTCs as an argument, but the rcar-du driver passes a bitmask of the CRTC indices. Fix it. Fixes: 4bf8e1962f91 ("drm: Renesas R-Car Display Unit DRM driver") Reported-by: Tomi Valkeinen <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Kieran Bingham <[email protected]>
2018-11-23drm: rcar-du: Fix the return value in case of error in ↵Christophe JAILLET1-1/+1
'rcar_du_crtc_set_crc_source()' We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'. However, 'ret' is set to some error codes if some function calls fail. Return 'ret' instead to propagate the error code. Fixes: 47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm: rcar-du: Add R8A7744 supportBiju Das1-1/+2
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU); it has 1 DPAD (RGB) output and 1 LVDS output. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Fabrizio Castro <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm: rcar-du: Add r8a77470 supportFabrizio Castro1-0/+28
Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23dt-bindings: display: renesas: du: Document the r8a7744 bindingsBiju Das1-0/+2
Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Fabrizio Castro <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23dt-bindings: display: renesas: du: Document the r8a77470 bindingsFabrizio Castro1-0/+2
Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Biju Das <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm: rcar-du: Fix typo in commentLaurent Pinchart1-1/+1
Fix the misspelled 'belance' in a comment. Reported-by: Ulrich Hecht <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm/shmobile: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-2/+2
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23drm/rcar-du: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2018-11-23Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki2-7/+24
* pm-cpufreq: cpufreq: ti-cpufreq: Only register platform_device when supported * pm-sleep: exec: make de_thread() freezable
2018-11-23Merge branches 'pm-opp' and 'pm-tools'Rafael J. Wysocki7-14/+14
* pm-opp: opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call opp: ti-opp-supply: Dynamically update u_volt_min * pm-tools: tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-23Merge tag 'drm-intel-fixes-2018-11-22' of ↵Dave Airlie7-4/+112
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225 - Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines - Avoid GPU hang on error capture on Broxton with Vt-d enabled - Avoid missing GPU relocations on Pineview and Bearlake (Gen3) Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22Merge branch 'ibmvnic-Fix-queue-and-buffer-accounting-errors'David S. Miller1-3/+10
Thomas Falcon says: ==================== ibmvnic: Fix queue and buffer accounting errors This series includes two small fixes. The first resolves a typo bug in the code to clean up unused RX buffers during device queue removal. The second ensures that device queue memory is updated to reflect new supported queue ring sizes after migration to other backing hardware. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi1-2/+7
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22net/dim: Update DIM start sample after each DIM iterationTal Gilboa1-0/+2
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22flexfiles: use per-mirror specified stateid for IOTigran Mkrtchyan3-12/+32
rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by: Tigran Mkrtchyan <[email protected]> Signed-off-by: Rick Macklem <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2018-11-22NFSv4.2 copy do not allocate memory under the lockOlga Kornievskaia2-20/+21
Bruce pointed out that we shouldn't allocate memory while holding a lock in the nfs4_callback_offload() and handle_async_copy() that deal with a racing CB_OFFLOAD and reply to COPY case. Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2018-11-22Merge tag 'sound-4.20-rc4' of ↵Linus Torvalds4-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only significant change is for OSS PCM emulation to convert with kvcalloc() to address both performance and security issues. It's a pretty straightforward change, which should be safe. The rest are, as usual, device-specific small fixes for HD-audio" * tag 'sound-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - fix AE-5 pincfg ALSA: hda/ca0132 - Add new ZxR quirk ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap() ALSA: hda/realtek - Add quirk entry for HP Pavilion 15 ALSA: oss: Use kvzalloc() for local buffer allocations
2018-11-22Merge tag 'char-misc-4.20-rc4' of ↵Linus Torvalds12-32/+55
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for issues that have been reported. Nothing major, highlights include: - gnss sync write fixes - uio oops fix - nvmem fixes - other minor fixes and some documentation/maintainers updates Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/security-bugs: Postpone fix publication in exceptional cases MAINTAINERS: Add Sasha as a stable branch maintainer gnss: sirf: fix synchronous write timeout gnss: serial: fix synchronous write timeout uio: Fix an Oops on load test_firmware: fix error return getting clobbered nvmem: core: fix regression in of_nvmem_cell_get() misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data drivers/misc/sgi-gru: fix Spectre v1 vulnerability Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up slimbus: ngd: remove unnecessary check
2018-11-22Merge tag 'usb-4.20-rc4' of ↵Linus Torvalds20-55/+167
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.20-rc4. There's the usual xhci and dwc2/3 fixes as well as a few minor other issues resolved for problems that have been reported. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdc-acm: add entry for Hiro (Conexant) modem usb: xhci: Prevent bus suspend if a port connect change or polling state is detected usb: core: Fix hub port connection events lost usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" usb: dwc2: pci: Fix an error code in probe usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc usb: xhci: fix timeout for transition from RExit to U0 usb: xhci: fix uninitialized completion when USB3 port got wrong status xhci: Add check for invalid byte size error when UAS devices are connected. xhci: handle port status events for removed USB3 hcd xhci: Fix leaking USB3 shared_hcd at xhci removal USB: misc: appledisplay: add 20" Apple Cinema Display USB: quirks: Add no-lpm quirk for Raydium touchscreens usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub usb: dwc3: gadget: Properly check last unaligned/zero chain TRB usb: dwc3: core: Clean up ULPI device
2018-11-22Merge tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtdLinus Torvalds4-55/+137
Pull mtd fixes from Boris Brezillon: "SPI NOR fixes: - Various fixes related to the SFDP parsing code merged in 4.20 - Fix for a page fault in the cadence-qspi NAND fixes: - Fix a macro name conflict between the QCOM NAND controller driver and the RISC-V asm headers - Fix of-node handling in the atmel driver" * tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd: mtd: spi-nor: fix selection of uniform erase type in flexible conf mtd: spi-nor: Fix Cadence QSPI page fault kernel panic mtd: rawnand: qcom: Namespace prefix some commands mtd: rawnand: atmel: fix OF child-node lookup mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw() mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use() mtd: spi-nor: fix iteration over smpt array mtd: spi-nor: don't drop sfdp data if optional parsers fail
2018-11-22Merge tag 'scsi-fixes' of ↵Linus Torvalds4-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes. The qla2xxx is a regression from 4.18 and the ufs one is a device enablement fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
2018-11-22iommu/vt-d: Use memunmap to free memremapPan Bian1-1/+1
memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-1/+1
Signed-off-by: Jani Nikula <[email protected]>
2018-11-22drm/prime: Fix drm_gem_prime_mmap() stack useNoralf Trønnes1-11/+20
drivers/gpu/drm/drm_prime.c: In function 'drm_gem_prime_mmap': >> drivers/gpu/drm/drm_prime.c:688:1: warning: the frame size of 1592 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fix by allocating on the heap. Fixes: 7698799f9554 ("drm/prime: Add drm_gem_prime_mmap()") Reported-by: kbuild test robot <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Christian König <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-2/+2
Signed-off-by: Jani Nikula <[email protected]>
2018-11-22drm/i915: avoid rebuilding i915_gpu_error.o on version string updatesHans Holmberg1-2/+2
There is no need to rebuild i915_gpu_error.o when the version string changes as the version is available in init_utsname()->release. Signed-off-by: Hans Holmberg <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Reviewed-by: Joonas Lahtinen <[email protected]> Signed-off-by: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22drm/sun4i: wait on implicit fence before displayQiang Yu3-0/+6
Render like lima will attach a fence to the framebuffer dma_buf, display like sun4i should wait it finish before show the framebuffer. Otherwise tearing will be observed. Signed-off-by: Qiang Yu <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22drm: Merge drm_info.c into drm_debugfs.cDaniel Vetter4-143/+90
Ever since commit cb6458f97b53d7f73043206c18014b3ca63ac345 Author: Daniel Vetter <[email protected]> Date: Thu Aug 8 15:41:34 2013 +0200 drm: remove procfs code, take 2 Having the code shared between procfs and debugfs in the separate drm_info.c file stopped making sense. Merge them. Noticed because Lyude asked some questions on irc about why we even have drm_info_node and I remember this old story. Cc: Lyude Paul <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22Revert "Input: Add the `REL_WHEEL_HI_RES` event code"Benjamin Tissoires2-20/+1
This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85. Quoting Peter: There is a HID feature report called "Resolution Multiplier" Described in the "Enhanced Wheel Support in Windows" doc and the "USB HID Usage Tables" page 30. http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf This was new for Windows Vista, so we're only a decade behind here. I only accidentally found this a few days ago while debugging a stuck button on a Microsoft mouse. The docs above describe it like this: a wheel control by default sends value 1 per notch. If the resolution multiplier is active, the wheel is expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or just send events more often, i.e. for less physical motion (e.g. MS Comfort mouse). For the latter, you need the right HW of course. The Sculpt mouse has tactile wheel clicks, so nothing really changes. The Comfort mouse has continuous motion with no tactile clicks. Similar to the free-wheeling Logitech mice but without any inertia. Note that the doc also says that Vista and onwards *always* enable this feature where available. An example HID definition looks like this: Usage Page Generic Desktop (0x01) Usage Resolution Multiplier (0x48) Logical Minimum 0 Logical Maximum 1 Physical Minimum 1 Physical Maximum 16 Report Size 2 # in bits Report Count 1 Feature (Data, Var, Abs) So the actual bits have values 0 or 1 and that reflects real values 1 or 16. We've only seen single-bits so far, so there's low-res and hi-res, but nothing in between. The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel). Microsoft suggests that > Vendors should ship their devices with smooth scrolling disabled and allow > Windows to enable it. This ensures that the device works like a regular HID > device on legacy operating systems that do not support smooth scrolling. (see the wheel doc linked above) The mice that we tested so far do reset on unplug. Device Support looks to be all (?) Microsoft mice but nothing else Not supported: - Logitech G500s, G303 - Roccat Kone XTD - all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a workstation that I could find don't have it. - Etekcity something something - Razer Imperator Supported: - Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4 - Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12 - Microsoft Surface mouse - yes, physical: 1:4 So again, I think this is really just available on Microsoft mice, but probably all decent MS mice released over the last decade. Looking at the hardware itself: - no noticeable notches in the weel - low-res: 18 events per 360deg rotation (click angle 20 deg) - high-res: 72 events per 360deg → matches multiplier of 4 - I can feel the notches during wheel turns - low-res: 24 events per 360 deg rotation (click angle 15 deg) - horiz wheel is tilt-based, continuous output value 1 - high-res: 24 events per 360deg with value 12 → matches multiplier of 12 - horiz wheel output rate doubles/triples?, values is 3 - It's a touch strip, not a wheel so no notches - high-res: events have value 4 instead of 1 a bit strange given that it doesn't actually have notches. Ok, why is this an issue for the current API? First, because the logitech multiplier used in Harry's patches looks suspiciously like the Resolution Multiplier so I think we should assume it's the same thing. Nestor, can you shed some light on that? - `REL_WHEEL` is defined as the number of notches, emulated where needed. - `REL_WHEEL_HI_RES` is the movement of the user's finger in microns. - `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold for action to be taken and one such action" https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel If the multiplier is set to M, this means we need an accumulated value of M until we can claim there was a wheel click. So after enabling the multiplier and setting it to the maximum (like Windows): - M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is the `REL_WHEEL_HI_RES` value. - wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm / (360deg/15deg)) - For every M units accumulated, send one `REL_WHEEL` event The problem here is that we've now hardcoded 20mm/15 deg into the kernel and we have no way of getting the size of the wheel or the click angle into the kernel. In userspace we now have to undo the kernel's calculation. If our click angle is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and calculate the correct angle instead. This also means the 15 is a hardcoded option forever and cannot be changed. In hid-logitech-hidpp.c, the microns per unit is hardcoded per device. Harry, did you measure those by hand? We'd need to update the kernel for every device and there are 10 years worth of devices from MS alone. The multiplier default is 8 which is in the right ballpark, so I'm pretty sure this is the same as the Resolution Multiplier, just in HID++ lingo. And given that the 120 magic factor is what Windows uses in the end, I can't imagine Logitech rolling their own thing here. Nestor? And we're already fairly inaccurate with the microns anyway. The MX Anywhere 2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch) would be 334 micron. That's only 80% of the fallback value of 406 in the kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7 doesn't exist because it's not a factor of 120. Summary: Best option may be to simply do what Windows is doing, all the HW manufacturers have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in fractions of 120, with 120 being one notch and divide that by the multiplier for the actual events. So e.g. the Logitech multiplier 8 would send value 15 for each event in hi-res mode. This can be converted in userspace to whatever userspace needs (combined with a hwdb there that tells you wheel size/click angle/...). Conflicts: include/uapi/linux/input-event-codes.h -> I kept the new reserved event in the code, so I had to adapt the revert slightly Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires2-73/+0
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling ↵Benjamin Tissoires1-34/+13
acceleration"" This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"Benjamin Tissoires1-245/+4
This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"Benjamin Tissoires1-5/+10
This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: logitech: fix a used uninitialized GCC warning"Benjamin Tissoires1-3/+5
This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Revert "HID: input: simplify/fix high-res scroll event handling"Benjamin Tissoires1-21/+22
This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <[email protected]> Acked-by: Harry Cutts <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Jiri Kosina <[email protected]>
2018-11-22Merge tag 'drm-misc-next-2018-11-21' of ↵Dave Airlie67-846/+2321
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 2: UAPI Changes: - Remove syncobj timeline support from drm. Cross-subsystem Changes: - Document canvas provider node in the DT bindings. - Improve documentation for TPO TPG110 DT bindings. Core Changes: - Use explicit state in drm atomic functions. - Add panel quirk for new GPD Win2 firmware. - Add DRM_FORMAT_XYUV8888. - Set the default import/export function in prime to drm_gem_prime_import/export. - Add a separate drm_gem_object_funcs, to stop relying on dev->driver->*gem* functions. - Make sure that tinydrm sets the virtual address also on imported buffers. Driver Changes: - Support active-low data enable signal in sun4i. - Fix scaling in vc4. - Use canvas provider node in meson. - Remove unused variables in sti and qxl and cirrus. - Add overlay plane support and primary plane scaling to meson. - i2c fixes in drm/bridge/sii902x - Fix mailbox read size in rockchip. - Spelling fix in panel/s6d16d0. - Remove unnecessary null check from qxl_bo_unref. - Remove unused arguments from qxl_bo_pin. - Fix qxl cursor pinning. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie11-56/+115
into drm-fixes - OD fixes for powerplay - Vega20 fixes - KFD fix for Kaveri - add missing firmware declaration for hainan (SI chip) - Fix DC user experience regressions related to panels that support >8 bpc Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-22Merge tag 'drm-misc-fixes-2018-11-21' of ↵Dave Airlie4-2/+23
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - vc4: Fix NULL deref in async path (Boris) - vc4: Avoid taking async path for cursor updates when impossible (Boris) - udmabuf: Fix mmap with PROT_WRITE (Gerd) - fb-helper: Don't use writeback connectors for fbdev (Paul) Cc: Boris Brezillon <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: Paul Kocialkowski <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20181121155248.GA241511@art_vandelay
2018-11-22drm/ast: fixed cursor may disappear sometimesY.C. Chen1-1/+1
Signed-off-by: Y.C. Chen <[email protected]> Cc: <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2018-11-21net: faraday: ftmac100: remove netif_running(netdev) check before disabling ↵Vincent Chen1-4/+3
interrupts In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by: Vincent Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22drm/ast: change resolution may cause screen blurredY.C. Chen1-0/+1
The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen <[email protected]> Cc: <[email protected]> Tested-by: Jean Delvare <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2018-11-21Merge branch 'smc-fixes'David S. Miller8-50/+120
Ursula Braun says: ==================== net/smc: fixes 2018-11-12 here is V4 of some net/smc fixes in different areas for the net tree. v1->v2: do not define 8-byte alignment for union smcd_cdc_cursor in patch 4/5 "net/smc: atomic SMCD cursor handling" v2->v3: stay with 8-byte alignment for union smcd_cdc_cursor in patch 4/5 "net/smc: atomic SMCD cursor handling", but get rid of __packed for struct smcd_cdc_msg v3->v4: get rid of another __packed for struct smc_cdc_msg in patch 4/5 "net/smc: atomic SMCD cursor handling" ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.