aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-06mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()Huang Ying1-2/+1
In set_pmd_migration_entry(), pmdp_invalidate() is used to change PMD atomically. But the PMD is read before that with an ordinary memory reading. If the THP (transparent huge page) is written between the PMD reading and pmdp_invalidate(), the PMD dirty bit may be lost, and cause data corruption. The race window is quite small, but still possible in theory, so need to be fixed. The race is fixed via using the return value of pmdp_invalidate() to get the original content of PMD, which is a read/modify/write atomic operation. So no THP writing can occur in between. The race has been introduced when the THP migration support is added in the commit 616b8371539a ("mm: thp: enable thp migration in generic path"). But this fix depends on the commit d52605d7cb30 ("mm: do not lose dirty and accessed bits in pmdp_invalidate()"). So it's easy to be backported after v4.16. But the race window is really small, so it may be fine not to backport the fix at all. Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: "Huang, Ying" <[email protected]> Reviewed-by: Zi Yan <[email protected]> Reviewed-by: William Kucharski <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Cc: <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Andrea Arcangeli <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking ↵Mel Gorman1-2/+36
page tables prot_numa : A user reported a bug against a distribution kernel while running a : proprietary workload described as "memory intensive that is not swapping" : that is expected to apply to mainline kernels. The workload is : read/write/modifying ranges of memory and checking the contents. They : reported that within a few hours that a bad PMD would be reported followed : by a memory corruption where expected data was all zeros. A partial : report of the bad PMD looked like : : [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2) : [ 5195.341184] ------------[ cut here ]------------ : [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35! : .... : [ 5195.410033] Call Trace: : [ 5195.410471] [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930 : [ 5195.410716] [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 : [ 5195.410918] [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 : [ 5195.411200] [<ffffffff81098322>] task_work_run+0x72/0x90 : [ 5195.411246] [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2 : [ 5195.411494] [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40 : [ 5195.411739] [<ffffffff815e56af>] retint_user+0x8/0x10 : : Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD : was a false detection. The bug does not trigger if automatic NUMA : balancing or transparent huge pages is disabled. : : The bug is due a race in change_pmd_range between a pmd_trans_huge and : pmd_nond_or_clear_bad check without any locks held. During the : pmd_trans_huge check, a parallel protection update under lock can have : cleared the PMD and filled it with a prot_numa entry between the transhuge : check and the pmd_none_or_clear_bad check. : : While this could be fixed with heavy locking, it's only necessary to make : a copy of the PMD on the stack during change_pmd_range and avoid races. A : new helper is created for this as the check if quite subtle and the : existing similar helpful is not suitable. This passed 154 hours of : testing (usually triggers between 20 minutes and 24 hours) without : detecting bad PMDs or corruption. A basic test of an autonuma-intensive : workload showed no significant change in behaviour. Although Mel withdrew the patch on the face of LKML comment https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is still open, and we have reports of Linpack test reporting bad residuals after the bad PMD warning is observed. In addition to that, bad rss-counter and non-zero pgtables assertions are triggered on mm teardown for the task hitting the bad PMD. host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7) .... host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096 The issue is observed on a v4.18-based distribution kernel, but the race window is expected to be applicable to mainline kernels, as well. [[email protected]: fix comment typo, per Rafael] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Rafael Aquini <[email protected]> Signed-off-by: Mel Gorman <[email protected]> Cc: <[email protected]> Cc: Zi Yan <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06Merge tag 'devprop-5.6-rc5' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Revert a problematic commit from the 5.3 development cycle (Brendan Higgins)" * tag 'devprop-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "software node: Simplify software_node_release() function"
2020-03-06Merge tag 'acpi-5.6-rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI documentation fix from Rafael Wysocki: "Fix Sphinx format warinings in an ACPI fan document added recently (Randy Dunlap)" * tag 'acpi-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation/admin-guide/acpi: fix fan_performance_states.rst warnings
2020-03-06Merge tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-212/+520
Pull drm fixes from Dave Airlie: "Weekly fixes round, looks like a few people woke up, got a bunch of fixes across the drivers. Bit bigger than I'd like but they all seem fine and hopefully it quiets down now. sun4i, kirin, mediatek and exynos on the ARM side. virtio-gpu and core have some mmap fixes, and there is a dma-buf leak. one ttm fence leak is also fixed. Otherwise it's mostly amdgpu and i915. One of the i915 fixes is for a very long latency I was seeing (using latencytop) running gnome-shell locally when using firefox and eating nearly all my RAM, it really helps with desktop responsiveness esp when firefox is chewing a lot. dma-buf: - fix memory leak core: - shmem object mmap fix. ttm: - Fix fence leak in ttm_buffer_object_transfer(). amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix i915: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer virtio: - Fix resource id creation race in virtio. - mmap fixes sun4i: - Fixes for sun4i VI layer format support. kirin: - kirin: Revert "Fix for hikey620 display offset problem" exynos: - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. mediatek: - overlay, cursor and gce fixes" ` * tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drm: (38 commits) drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS case drm/amd/powerplay: fix pre-check condition for setting clock range drm/amd/display: fix dcc swath size calculations on dcn1 drm/amd/display: Clear link settings on MST disable connector drm/amdgpu: disable 3D pipe 1 on Navi1x drm/amdgpu: clean wptr on wb when gpu recovery drm: kirin: Revert "Fix for hikey620 display offset problem" drm/i915/gt: Drop the timeline->mutex as we wait for retirement drm/i915/perf: Reintroduce wait on OA configuration completion drm/sun4i: Fix DE2 VI layer format support drm/sun4i: Add separate DE3 VI layer formats drm/sun4i: de2/de3: Remove unsupported VI layer formats drm/i915/selftests: Fix return in assert_mmap_offset() drm/i915: Protect i915_request_await_start from early waits drm/i915/tgl: Add Wa_1608008084 drm/i915/tgl: Add Wa_22010178259:tgl drm/i915: Program MBUS with rmw during initialization drm/i915/psr: Force PSR probe only after full initialization drm/i915/gem: Break up long lists of object reclaim ...
2020-03-06tty: serial: make SERIAL_SPRD not depend on ARCH_SPRDChunyan Zhang1-1/+0
Remove the dependency with ARCH_SPRD from sprd serial/console Kconfig-s, since we want them can be built-in when ARCH_SPRD is set as 'm'. Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06arm64: change ARCH_SPRD Kconfig to tristateChunyan Zhang1-1/+1
The default value of Kconfig for almost all sprd drivers are the same with ARCH_SPRD, making these drivers built as modules as default would be easier if we can set ARCH_SPRD as 'm', so this patch change ARCH_SPRD to tristate. Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06serial: 8250_lpss: Add ->setup() for Elkhart Lake portsAndy Shevchenko1-0/+6
The ->setup() callback is mandatory for the devices. Provide it for Elkhart Lake UART ports. Note, for time being it's empty, but in the future it might require an additional configuration such as DMA. Reported-by: Raymond Tan <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06serial: 8250-mtk: modify mtk uart power and clock managementChangqi Hu1-18/+32
MTK uart design no need to control uart clock, so we just control bus clock in runtime function. Add uart clock used count to avoid repeatedly switching the clock. Signed-off-by: Changqi Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06tty: imx serial: Implement support for reversing TX and RX polarityGeorge Hilliard1-16/+28
The peripheral has support for inverting its input and/or output signals. This is useful if the hardware flips polarity of the peripheral's signal, such as swapped +/- pins on an RS-422 transceiver, or an inverting level shifter. Add support for these control registers via the device tree binding. As part of this change, make the writes of the various registers more uniform by moving the UCR3 block up near the other registers' blocks, since the INVT bit must be set before enabling the peripheral. Signed-off-by: George Hilliard <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06dt-bindings: serial: document fsl,inverted-tx and -rx optionsGeorge Hilliard1-0/+4
Add a description for the new fsl,inverted-tx and fsl,inverted-rx options for the i.MX UART peripheral. Signed-off-by: George Hilliard <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06serial: ar933x_uart: add RS485 supportDaniel Golle2-6/+108
Emulate half-duplex operation and use mctrl_gpio to add support for RS485 tranceiver with transmit/receive switch hooked to RTS GPIO line. This is needed to make use of the RS485 port found on Teltonika RUT955. Signed-off-by: Daniel Golle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06tty: serial: qcom_geni_serial: Fix GPIO swapping with workaroundRoja Rani Yarubandi1-0/+30
Add capability to support RX-TX, CTS-RTS pins swap in HW. Configure UART_IO_MACRO_CTRL register accordingly if RX-TX pair or CTS-RTS pair or both pairs swapped. Signed-off-by: Roja Rani Yarubandi <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Tested-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06tty: serial: cpm_uart: Convert to use GPIO descriptorsLinus Walleij2-28/+24
The CPM UART (PowerPC) has an open coded GPIO modem control handling. Since I can't test this I can't just migrate it to the serial mctrl GPIO helper library though I wish I could. I do second best and convert it to GPIO descriptors at least. Cc: Rasmus Villemoes <[email protected]> Cc: Christophe Leroy <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06tty: serial: lantiq: Drop GPIO includeLinus Walleij1-1/+0
Nothing in this driver uses the symbols from <linux/gpio.h> so drop this include. Cc: Rahul Tanwar <[email protected]> Cc: Songjun Wu <[email protected]> Cc: Martin Blumenstingl <[email protected]> Cc: John Crispin <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06tty: serial: atmel_serial: Drop GPIO includesLinus Walleij1-3/+0
Nothing in this driver uses the symbols from these GPIO includes so drop them. These are probably just historical artifacts from befor mctrl_gpio was used. Cc: Ludovic Desroches <[email protected]> Cc: Razvan Stefanescu <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Ludovic Desroches <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06ALSA: sgio2audio: Remove usage of dropped hw_params/hw_free functionsThomas Bogendoerfer1-6/+0
Commit ee88f4ebe575 ("ALSA: mips: Use managed buffer allocation") removed superfluous hw_params/hw_free callbacks, but forgot to remove them where they were used. Fixes: ee88f4ebe575 ("ALSA: mips: Use managed buffer allocation") Signed-off-by: Thomas Bogendoerfer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-06Merge branch 'acpi-doc'Rafael J. Wysocki1-2/+2
* acpi-doc: Documentation/admin-guide/acpi: fix fan_performance_states.rst warnings
2020-03-06vt: selection, indent switch-case properlyJiri Slaby1-37/+35
Shift the cases one level left as this is how we are supposed to write the switch-case code according to the CodingStyle. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: selection, remove redeclaration of poke_blanked_consoleJiri Slaby1-2/+0
It is declared in vt_kern.h, so no need to declare it in selection.c which includes the header. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: vt_kern.h, remove extern from functionsJiri Slaby1-31/+31
Unify the declarations of functions in vt_kern.h: some are with extern, some are not. Remove extern from the former as it is not needed for functions. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: switch vt_dont_switch to boolJiri Slaby2-4/+4
vt_dont_switch is pure boolean, no need for whole char. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: selection, create struct from console selection globalsJiri Slaby1-46/+48
Move all the selection global variables to a structure vc_selection, instantiated as vc_sel. This helps to group all the variables together and see what should be protected by the embedded lock too. It might be used later also for per-console selection support. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: selection, localize use_unicodeJiri Slaby1-16/+16
use_unicode needs not be global. It is used only in set_selection_kernel and sel_pos (a callee). It is also always set there prior calling sel_pos. So make use_unicode local and rename it to plain shorter "unicode". Finally, propagate it to sel_pos via parameter. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06vt: selection, remove 2 local variables from set_selection_kernelJiri Slaby1-9/+5
multiplier and mode are not actually needed: * multiplier is used only in kmalloc_array, so use "use_unicode ? 4 : 1" directly * mode is used only to assign a bool in this manner: if (cond) x = true; else x = false; So do "x = cond" directly. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-06Merge tag 'amd-drm-fixes-5.6-2020-03-05' of ↵Dave Airlie8-55/+129
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-05: amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-06Merge tag 'drm-intel-fixes-2020-03-05' of ↵Dave Airlie13-57/+142
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc5: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-06Merge tag 'drm-misc-fixes-2020-03-05' of ↵Dave Airlie12-75/+202
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6.rc5: - dma-buf fix memory leak - Fix resource id creation race in virtio. - Various mmap fixes. - Fix fence leak in ttm_buffer_object_transfer(). - Fixes for sun4i VI layer format support. - kirin: Revert "Fix for hikey620 display offset problem" Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-05riscv: fix seccomp reject syscall code pathTycho Andersen3-21/+8
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <[email protected]> Signed-off-by: Tycho Andersen <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05blktrace: fix dereference after null checkCengiz Can1-1/+4
There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU") Cc: [email protected] Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Bob Liu <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Cengiz Can <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-05MAINTAINERS: Add missed files related to Synopsys DesignWare UARTAndy Shevchenko1-0/+2
8250_dw has been split to library part and the driver, the library is being used by 8250_lpss, which represents Synosys DesignWare UART (with optional Synopsys Designware DMA) enumerated by PCI. Add missed above mentioned files to the database record for review. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05serial: 8250_exar: add support for ACCES cardsJay Dolan1-0/+33
Add ACCES VIDs and PIDs that use the Exar chips Signed-off-by: Jay Dolan <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <[email protected]> Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05tty:serial:mvebu-uart:fix a wrong returntangbin1-1/+1
in this place, the function should return a negative value and the PTR_ERR already returns a negative,so return -PTR_ERR() is wrong. Signed-off-by: tangbin <[email protected]> Cc: stable <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel3-0/+4
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel3-0/+4
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel2-29/+2
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel1-0/+20
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V update from Wei Liu: - Update MAINTAINERS file for Hyper-V - One cleanup patch for Hyper-V HID driver * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: HID: hyperv: NULL check before some freeing functions is not needed. Hyper-V: add myself as a maintainer Hyper-V: Drop Sasha Levin from the Hyper-V maintainers
2020-03-05Merge tag 'dmaengine-fix-5.6-rc5' of ↵Linus Torvalds7-153/+400
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - Doc updates to clean warnings for dmaengine - Fixes for newly added Intel idxd driver - More fixes for newly added TI k3-udma driver - Fixes for IMX and Tegra drivers" * tag 'dmaengine-fix-5.6-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-sdma: Fix the event id check to include RX event for UART6 dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list dmaengine: tegra-apb: Fix use-after-free dmaengine: imx-sdma: fix context cache dmaengine: idxd: wq size configuration needs to check global max size dmaengine: idxd: sysfs input of wq incorrect wq type should return error dmaengine: coh901318: Fix a double lock bug in dma_tc_handle() dmaengine: idxd: correct reserved token calculation dmaengine: ti: k3-udma: Fix terminated transfer handling dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic dmaengine: ti: k3-udma: Move the TR counter calculation to helper function dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup() dmaengine: doc: fix warnings/issues of client.rst dmaengine: idxd: fix runaway module ref count on device driver bind
2020-03-05xen/blkfront: fix ring info addressingJuergen Gross1-38/+42
Commit 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") made struct blkfront_ring_info size dynamic. This is fine when running with only one queue, but with multiple queues the addressing of the single queues has to be adapted as the structs are allocated in an array. Fixes: 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") Reported-by: Sander Eikelenboom <[email protected]> Tested-by: Sander Eikelenboom <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen/xenbus: fix lockingJuergen Gross3-8/+10
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->err should be updated before req->stateDongli Zhang1-0/+2
This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->body should be updated before req->stateDongli Zhang2-3/+8
The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294Jian-Hong Pan1-0/+13
A headset on the laptop like ASUS B9450FA does not work, until quirk ALC294_FIXUP_ASUS_HPE is applied. Signed-off-by: Jian-Hong Pan <[email protected]> Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume ↵Hersen Wu1-0/+69
from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang1-3/+3
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang2-4/+1
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic1-2/+2
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.