aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-05x86/intel/quark: Select COMMON_CLKAndy Shevchenko1-0/+1
The commit 8bbc2a135b63 ("x86/intel/quark: Add Intel Quark platform support") introduced a minimal support of Intel Quark SoC. That allows to use core parts of the SoC. However, the SPI, I2C, and GPIO drivers can't be selected by kernel configuration because they depend on COMMON_CLK. The patch adds a COMMON_CLK selection to the platfrom definition to allow user choose the drivers. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Ong, Boon Leong <[email protected]> Cc: Bryan O'Donoghue <[email protected]> Cc: Darren Hart <[email protected]> Fixes: 8bbc2a135b63 ("x86/intel/quark: Add Intel Quark platform support") Link: http://lkml.kernel.org/r/1425569044-2867-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <[email protected]>
2015-03-05dmaengine: qcom_bam_dma: fix wrong register offsetsStanimir Varbanov1-3/+3
The commit fb93f520e (dmaengine: qcom_bam_dma: Generalize BAM register offset calculations) wrongly populated base offsets for event registers for bam v1.4. Signed-off-by: Stanimir Varbanov <[email protected]> Reviewed-by: Archit Taneja <[email protected]> Reviewed-by: Andy Gross <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-03-05dmaengine: bam-dma: fix a warning about missing capabilitiesStanimir Varbanov1-0/+4
Avoid the warning below triggered during dmaengine async device registration. WARNING: CPU: 1 PID: 1 at linux/drivers/dma/dmaengine.c:863 dma_async_device_register+0x2a8/0x4b8() this driver doesn't support generic slave capabilities reporting To do that fill mandatory .directions bit mask, .src/dst_addr_widths and .residue_granularity dma_device fields with appropriate values. Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-03-05Merge tag 'usb-serial-4.0-rc3' of ↵Greg Kroah-Hartman10-45/+106
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.0-rc3 Here are a few fixes for reported problems including a usb-debug device buffer overflow, potential use-after-free on failed probe, and a couple of issues with the USB console. Some new device IDs are also added. Signed-off-by: Johan Hovold <[email protected]>
2015-03-05workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for ↵Tejun Heo2-5/+54
PREEMPT_NONE cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/[email protected] v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Rabin Vincent <[email protected]> Cc: Tomeu Vizoso <[email protected]> Cc: [email protected] Tested-by: Jesper Nilsson <[email protected]> Tested-by: Rabin Vincent <[email protected]>
2015-03-05ALSA: line6: Clamp values correctlyTakashi Iwai1-3/+3
The usages of clamp() macro in sound/usb/line6/playback.c are just wrong, the low and high values are swapped. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-03-05ALSA: msnd: add some missing curly bracesDan Carpenter1-1/+2
There were some curly braces intended here. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-03-05ARM: at91/pm: MOR register KEY was missingPatrice Vilchez1-0/+2
Because writing the MOR register requires the PASSWD(0x37), if missed, the write operation will be aborted. Signed-off-by: Patrice Vilchez <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2015-03-05ARM: at91/dt: sama5d4: fix lcdck clock definitionBoris BREZILLON1-2/+2
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4. Signed-off-by: Boris BREZILLON <[email protected]> [[email protected]: squashed 2 related patches] Signed-off-by: Nicolas Ferre <[email protected]>
2015-03-05ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clkBoris BREZILLON1-1/+1
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2015-03-05ARM: at91: debug: fix non MMU debugAlexandre Belloni1-1/+4
Linux may be used without MMU on atmel SoCs, fix debug in this configuration. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2015-03-05dmaengine: ioatdma: workaround for incorrect DMACAP registerDave Jiang1-0/+4
BDX-DE IOATDMA reports incorrect DMACAP register for PQ related ops. Ignoring those bits. Signed-off-by: Dave Jiang <[email protected]> Acked-by: Dan Williams <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-03-05dmaengine: at_xdmac: fix for chan conf simplificationLudovic Desroches1-4/+3
When simplificating the channel configuration, the cyclic case has been forgotten. It leads to use bad configuration causing many bugs. Signed-off-by: Ludovic Desroches <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-03-05dmaengine: dw: don't handle interrupt when dmaengine is not usedJie Yang1-1/+1
When dma controller is not used by any user and set off, we should disble interrupt handler, at least the interrupt reset part, for some subsystem, e.g. ADSP, may use the dma in its own logic, here reset the interrupt may make this subsystem work abnormally. Signed-off-by: Jie Yang <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2015-03-05thermal: Make sysfs attributes of cooling devices default attributesMatthias Kaehlcke1-20/+17
Default attributes are created when the device is registered. Attributes created after device registration can lead to race conditions, where user space (e.g. udev) sees the device but not the attributes. Signed-off-by: Matthias Kaehlcke <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2015-03-05Thermal/int340x: Fix memleak for aux tripSrinivas Pandruvada1-4/+6
When thermal zone device register fails or on module exit, the memory for aux_trip is not freed. This change fixes this issue. Signed-off-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2015-03-04seq_buf: Fix seq_buf_bprintf() truncationSteven Rostedt (Red Hat)1-1/+1
In seq_buf_bprintf(), bstr_printf() is used to copy the format into the buffer remaining in the seq_buf structure. The return of bstr_printf() is the amount of characters written to the buffer excluding the '\0', unless the line was truncated! If the line copied does not fit, it is truncated, and a '\0' is added to the end of the buffer. But in this case, '\0' is included in the length of the line written. To know if the buffer had overflowed, the return length will be the same or greater than the length of the buffer passed in. The check in seq_buf_bprintf() only checked if the length returned from bstr_printf() would fit in the buffer, as the seq_buf_bprintf() is only to be an all or nothing command. It either writes all the string into the seq_buf, or none of it. If the string is truncated, the pointers inside the seq_buf must be reset to what they were when the function was called. This is not the case. On overflow, it copies only part of the string. The fix is to change the overflow check to see if the length returned from bstr_printf() is less than the length remaining in the seq_buf buffer, and not if it is less than or equal to as it currently does. Then seq_buf_bprintf() will know if the write from bstr_printf() was truncated or not. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Reported-by: Joe Perches <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2015-03-04ARM: fix typos in smc91x platform dataArnd Bergmann5-4/+6
I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: b70661c70830d ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: David S. Miller <[email protected]>
2015-03-05x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimizationAndy Lutomirski1-5/+8
'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by: Ingo Molnar <[email protected]>
2015-03-05Merge branch 'msm-fixes-4.0' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie6-53/+81
into drm-fixes Fixup some fallout of the fallout of atomic dpms, few mdp5 cursor fixes, fix a leak in error path, and some fixes for kexec * 'msm-fixes-4.0' of git://people.freedesktop.org/~robclark/linux: drm/msm: kexec fixes drm/msm/mdp5: fix cursor blending drm/msm/mdp5: fix cursor ROI drm/msm/atomic: Don't leak atomic commit object when commit fails drm/msm/mdp5: Avoid flushing registers when CRTC is disabled drm/msm: update generated headers (add 6th lm.base entry) drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes"
2015-03-04drm/msm: kexec fixesRob Clark2-0/+10
In kexec environment, we are more likely to encounter irq's already enabled from previous environment. At which point we find that writes to disable/clear pending irq's are slightly less than useless without first enabling clocks. TODO: full blown state read-in so kexec'd kernel can inherit the mode already setup. Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm/mdp5: fix cursor blendingRob Clark1-1/+0
Seems like we just want BLEND_EN and not BLEND_TRANSP_EN (setting the latter results in black pixels in the cursor image treated as transparent). Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm/mdp5: fix cursor ROIRob Clark1-28/+40
If cursor is set near the edge of the screen, it is not valid to use the new cursor width/height as the ROI dimensions. Split out the ROI calc and use it both cursor_set and cursor_move. Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm/atomic: Don't leak atomic commit object when commit failsLaurent Pinchart1-1/+3
If the atomic commit fails due to completion wait interruption the atomic commit object is not freed and is thus leaked. Free it. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm/mdp5: Avoid flushing registers when CRTC is disabledStephane Viau1-7/+19
When a CRTC is disabled, no CTL is allocated to it (CRTC->ctl == NULL); in that case we should not try to FLUSH registers and do nothing instead. This can happen when we try to move a cursor but the CRTC's CTL (CONTROL) has not been allocated yet (inactive CRTC). It can also happens when we .atomic_check()/.atomic_flush() on a disabled CRTC. A CTL needs to be kept as long as the CRTC is alive. Releasing it after the last VBlank is safer than in .atomic_flush(). Signed-off-by: Stephane Viau <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm: update generated headers (add 6th lm.base entry)Stephane Viau1-11/+4
Some target have up to 6 layer mixers (LM). Let the header file access the last LM's base address. Signed-off-by: Stephane Viau <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2015-03-04drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes"Stephane Viau2-5/+5
Commit 0b776d457b94 ("drm/msm: fix fallout of atomic dpms changes") has a typo in both mdp5_encoder_helper_funcs and mdp5_crtc_helper_funcs definitions: .dpms entry should be replaced by .disable and .enable Also fixed a typo in mdp5_encoder_enable(). Note that these typos are only present for MDP5. MDP4 is fine. Signed-off-by: Stephane Viau <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2015-03-05Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie14-127/+122
into drm-fixes Radeon fixes for 4.0: - Fix some fallout from the audio rework - Fix a possible oops in the CS ioctl - Fix interlaced modes on DCE8 - Do a posting read in irq_set callbacks to make sure interrupts are properly flushed through the pci bridge * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix interlaced modes on DCE8 drm/radeon: fix DRM_IOCTL_RADEON_CS oops drm/radeon: do a posting read in cik_set_irq drm/radeon: do a posting read in si_set_irq drm/radeon: do a posting read in evergreen_set_irq drm/radeon: do a posting read in r600_set_irq drm/radeon: do a posting read in rs600_set_irq drm/radeon: do a posting read in r100_set_irq radeon/audio: fix DP audio on DCE6 radeon/audio: fix whitespace drm/radeon: adjust audio callback order drm/radeon: properly set dto for dp on DCE4/5 drm/radeon/audio: update EDID derived fields in modeset drm/radeon: don't toggle audio state in modeset drm/radeon/audio: set mute around state setup drm/radeon: assign pin in detect drm/radeon: fix the audio dpms callbacks
2015-03-04Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ requestValentin Rothberg1-3/+3
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. Currently, plat->irqtype is only set to IRQF_TRIGGER_FALLING. This patch sets the ONESHOT flag directly in request_threaded_irq() to enforce the flag without being affected by future changes to plat->irqtype. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-03-04Input: ALPS - fix memory leak when detection failsDmitry Torokhov1-1/+3
This fixes memory leak introduced by commit a09221e83e13e09a33109b9b037484eade901cea Acked-by: Pali Rohár <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-03-05drm/ttm: device address space != CPU address spaceAlex Deucher4-4/+4
We need to store device offsets in 64 bit as the device address space may be larger than the CPU's. Fixes GPU init failures on radeons with 4GB or more of vram on 32 bit kernels. We put vram at the start of the GPU's address space so the gart aperture starts at 4 GB causing all GPU addresses in the gart aperture to get truncated. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89072 [airlied: fix warning on nouveau build] Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Acked-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2015-03-05drm/mm: Support 4 GiB and larger rangesThierry Reding4-104/+110
The current implementation is limited by the number of addresses that fit into an unsigned long. This causes problems on 32-bit Tegra where unsigned long is 32-bit but drm_mm is used to manage an IOVA space of 4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1 (or 4 GiB - 4 KiB for page granularity). This commit changes the start and size of the range to be an unsigned 64-bit integer, thus allowing much larger ranges to be supported. [airlied: fix i915 warnings and coloring callback] Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Dave Airlie <[email protected]> fixupo
2015-03-04devicetree: Add TI-NSPIRE USB OTG support to device treeDaniel Tang3-0/+30
Signed-off-by: Daniel Tang <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2015-03-04ARM: multi_v7_defconfig: increase the number of maximum number of CPUs to 16Tyler Baker1-1/+1
The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8() DT /cpu 9 nodes greater than max cores 8, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Hisilicon HiP04 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0) [] (setup_arch) from [] (start_kernel+0x8c/0x3b4) [] (start_kernel) from [<10208074>] (0x10208074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html Cc: Olof Johansson <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: Tyler Baker <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2015-03-04ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8Tyler Baker1-0/+1
The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0() DT /cpu 5 nodes greater than max cores 4, capping them CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Allwinner sun9i Family [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x74/0x90) [] (dump_stack) from [] (warn_slowpath_common+0x70/0xac) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4) [] (setup_arch) from [] (start_kernel+0x88/0x3ac) [] (start_kernel) from [<20008074>] (0x20008074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html Cc: Maxime Ripard <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: Tyler Baker <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2015-03-04locks: fix fasync_struct memory leak in lease upgrade/downgrade handlingJeff Layton1-1/+2
Commit 8634b51f6ca2 (locks: convert lease handling to file_lock_context) introduced a regression in the handling of lease upgrade/downgrades. In the event that we already have a lease on a file and are going to either upgrade or downgrade it, we skip doing any list insertion or deletion and simply re-call lm_setup on the existing lease. As of commit 8634b51f6ca2 however, we end up calling lm_setup on the lease that was passed in, instead of on the existing lease. This causes us to leak the fasync_struct that was allocated in the event that there was not already an existing one (as it always appeared that there wasn't one). Fixes: 8634b51f6ca2 (locks: convert lease handling to file_lock_context) Reported-and-Tested-by: Daniel Wagner <[email protected]> Signed-off-by: Jeff Layton <[email protected]>
2015-03-04Merge tag 'ecryptfs-4.0-rc3-fixes' of ↵Linus Torvalds4-8/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Fixes for proper ioctl handling and an untriggerable buffer overflow - The eCryptfs ioctl handling functions should only pass known-good ioctl commands to the lower filesystem - A static checker found a potential buffer overflow. Upon inspection, it is not triggerable due to input validation performed on the mount parameters" * tag 'ecryptfs-4.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: don't pass fs-specific ioctl commands through eCryptfs: ensure copy to crypt_stat->cipher does not overrun
2015-03-04Merge tag 'for-v4.0-rc/meson-dts' of ↵Arnd Bergmann5-0/+222
https://github.com/carlocaione/linux-meson into next/dt Pull "meson DTS changes" from Carlo Caione: - New DTS for MINIX NEO-X8 - Add DTS support for SPIFC, Ethernet controller and pinctrl * tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson: ARM: dts: meson: add DTS file for MINIX NEO-X8 ARM: dts: meson8: add pinctrl node ARM: dts: meson: enable Ethernet controller ARM: dts: meson: add node for SPIFC
2015-03-04Merge tag 'renesas-dt-for-v4.1' of ↵Arnd Bergmann17-51/+647
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * Increase hardware coverage of DT for various SoCs * Add PFC information for emev2 SoC * Remap entire APMU region for r8a7791 and r8a7790 SoCs * Declare the full 512 MiB of RAM for kzm9g board * Add selectable sources to DIV6 clocks to sh73a0 SoC * Add missing INTCA0 clock for irqpin module on sh73a0 SoC * Set control-parent for all irqpin node on sh73a0 SoC * tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits) ARM: shmobile: r8a7794: add SDHI DT support ARM: shmobile: r8a7790: add ADSP clocks ARM: shmobile: r8a7791: add ADSP clocks ARM: shmobile: henninger: add CAN0 DT support ARM: shmobile: r8a7791: add CAN DT support ARM: shmobile: r8a7791: add CAN clocks ARM: shmobile: r8a7790: add CAN DT support ARM: shmobile: r8a7790: add CAN clocks ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1 ARM: shmobile: emev2 dtsi: Add PFC information ARM: shmobile: r8a7791: smp: remap whole apmu region ARM: shmobile: r8a7790: smp: remap whole apmu region ARM: shmobile: koelsch: Add DU HDMI output support ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names ARM: shmobile: r8a7794: alt: Enable ethernet controller ARM: shmobile: r8a7794: Add ethernet controller to device tree ARM: shmobile: r8a7794: Add IPMMU DT nodes ARM: shmobile: r8a7791: Add IPMMU DT nodes ARM: shmobile: r8a7790: Add IPMMU DT nodes ...
2015-03-04clk: at91: implement suspend/resume for the PMC irqchipBoris BREZILLON2-1/+20
The irq line used by the PMC block is shared with several peripherals including the init timer which is registering its handler with IRQF_NO_SUSPEND. Implement the appropriate suspend/resume callback for the PMC irqchip, and inform irq core that PMC irq handler can be safely called while the system is suspended by setting IRQF_COND_SUSPEND. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2015-03-04rtc: at91rm9200: rework wakeup and interrupt handlingBoris BREZILLON1-14/+48
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2015-03-04rtc: at91sam9: rework wakeup and interrupt handlingBoris BREZILLON1-12/+61
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2015-03-04PM / wakeup: export pm_system_wakeup symbolBoris BREZILLON1-0/+1
Export pm_system_wakeup function to allow irq handlers to deal with system wakeup. This is needed for shared IRQ lines where one of the handler is registered with IRQF_NO_SUSPEND, while the other ones want to configure it as a wakeup source. In this specific case, irq core does not handle the wakeup process and leave the decision to each irq handler. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2015-03-04team: don't traverse port list using rcu in team_set_mac_addressJiri Pirko1-3/+3
Currently the list is traversed using rcu variant. That is not correct since dev_set_mac_address can be called which eventually calls rtmsg_ifinfo_build_skb and there, skb allocation can sleep. So fix this by remove the rcu usage here. Fixes: 3d249d4ca7 "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-04net: fec: fix rcv is not last issue when do suspend/resume testFugang Duan1-1/+1
When do suspend/resume stress test, some log shows "rcv is not +last". The issue is that enet suspend will disable phy clock, phy link down, after resume back, enet MAC redo initial and ready to tx/rx packet, but phy still is not ready which is doing auto-negotiation. When phy link is not up, don't schdule napi soft irq. [Peter] It has fixed kernel panic after long time suspend/resume test with nfs rootfs. [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8864.464225] pgd = 80004000 [ 8864.466997] [00000000] *pgd=00000000 [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM [ 8864.475353] Modules linked in: evbug [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234 [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000 [ 8864.498137] PC is at memcpy+0x80/0x330 [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8 [ 8864.506735] pc : [<802bb080>] lr : [<8057c204>] psr: 00000113 [ 8864.506735] sp : be07bbd4 ip : 00000010 fp : be07bc0c [ 8864.518235] r10: 0000000e r9 : 00000000 r8 : 809c7754 [ 8864.523479] r7 : 809c7754 r6 : bb43c040 r5 : bd280cc0 r4 : 00000012 [ 8864.530025] r3 : 00000804 r2 : fffffff2 r1 : 00000000 r0 : bb43b83c [ 8864.536575] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8864.543904] Control: 10c5387d Table: bd14c04a DAC: 00000015 [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210) [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000) [ 8864.560250] bbc0: bd280cc0 bb43c040 809c7754 [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003 [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760 [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000 [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90 [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214 [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0 [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0 [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000 [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003 [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8 [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88 [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8 [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8 [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48 [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680 [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68 [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740 [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440 [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8 [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000 [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28 [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003 [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000 [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000 [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000 [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7 [ 8864.839115] Backtrace: [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8) [ 8864.850173] r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000 [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac) [ 8864.864152] r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0 [ 8864.872115] r4:bd8a0718 [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74) [ 8864.883167] r5:00000000 r4:bf0810a0 [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec) [ 8864.895016] r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001 [ 8864.902982] r4:bd8a0718 [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4) [ 8864.913417] r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c [ 8864.921382] r4:00000020 [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138) [ 8864.931289] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000 [ 8864.939252] r4:809c0d7c [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8) [ 8864.949688] r4:809c0d7c r3:00000125 [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68) [ 8864.961707] r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c) [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30) [ 8864.982173] bde0: 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff [ 8865.003638] r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934 [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160) [ 8865.018334] r4:be7c1680 r3:be069380 [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc) [ 8865.030098] r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680 [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44) [ 8865.045307] r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000 [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48) [ 8865.061822] r4:be07a000 r3:be07a000 [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64) [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190) [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8) [ 8865.089133] r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780 [ 8865.097097] r4:00000000 r3:be069380 [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24) [ 8865.107990] r7:00000000 r6:00000000 r5:8004584c r4:be035780 [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004) [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]--- [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Cc: [v3.19+] [email protected] Tested-by: Peter Chen <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Fugang Duan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-04Merge branch 'xgene'David S. Miller3-3/+10
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix backward compatibility of newer firmware with older kernel Kernel 3.17 driver supports only RGMII ethernet interface. Since the Tianocore DT contains same compatibility string for RGMII, SGMII based 1G and XFI based 10G interfaces, crash happens when probe called on SGMII based 1G and XFI based 10G interface. This patch fixes the backward compatibility of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. v2: Address comments from v1 * updated cover letter subject line with net: xgene * Documentation: formatted compatible string values as list v1: * Initial version ==================== Signed-off-by: David S. Miller <[email protected]>
2015-03-04drivers: net: xgene: fix new firmware backward compatibility with older driverIyappan Subramanian1-0/+4
This patch fixes the backward compatibile of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Tested-by: Mark Langsdorf <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-04dtb: change binding name to match with newer firmware DTIyappan Subramanian1-2/+2
This patch fixes the backward compatibility of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. The new bindings are in sync with the newer firmware. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Tested-by: Mark Langsdorf <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-04Documentation: dts: Update compatible field description for APM X-GeneIyappan Subramanian1-1/+4
Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Tested-by: Mark Langsdorf <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-04net: ping: Return EAFNOSUPPORT when appropriate.Lorenzo Colitti2-4/+13
1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by: Lorenzo Colitti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.