aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-12RDMA/counter: Prevent auto-binding a QP which are not tracked with resMark Zhang1-0/+3
Some QPs (e.g. XRC QP) are not tracked in kernel, in this case they have an invalid res and should not be bound to any dynamically-allocated counter in auto mode. This fixes below call trace: BUG: kernel NULL pointer dereference, address: 0000000000000390 PGD 80000001a7233067 P4D 80000001a7233067 PUD 1a7215067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 24822 Comm: ibv_xsrq_pingpo Not tainted 5.4.0-rc5+ #21 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:rdma_counter_bind_qp_auto+0x142/0x270 [ib_core] Code: e1 48 85 c0 48 89 c2 0f 84 bc 00 00 00 49 8b 06 48 39 42 48 75 d6 40 3a aa 90 00 00 00 75 cd 49 8b 86 00 01 00 00 48 8b 4a 28 <8b> 80 90 03 00 00 39 81 90 03 00 00 75 b4 85 c0 74 b0 48 8b 04 24 RSP: 0018:ffffc900003f39c0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88820020ec00 RSI: 0000000000000004 RDI: ffffffffffffffc0 RBP: 0000000000000001 R08: ffff888224149ff0 R09: ffffc900003f3968 R10: ffffffffffffffff R11: ffff8882249c5848 R12: ffffffffffffffff R13: ffff88821d5aca50 R14: ffff8881f7690800 R15: ffff8881ff890000 FS: 00007fe53a3e1740(0000) GS:ffff888237b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000390 CR3: 00000001a7292006 CR4: 00000000003606a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _ib_modify_qp+0x3a4/0x3f0 [ib_core] ? lookup_get_idr_uobject.part.8+0x23/0x40 [ib_uverbs] modify_qp+0x322/0x3e0 [ib_uverbs] ib_uverbs_modify_qp+0x43/0x70 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_run_method+0x6be/0x760 [ib_uverbs] ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ib_uverbs_cmd_verbs+0x18d/0x3a0 [ib_uverbs] ? get_acl+0x1a/0x120 ? __alloc_pages_nodemask+0x15d/0x2c0 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] do_vfs_ioctl+0xa5/0x610 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support") Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Reviewed-by: Ido Kalir <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-12-12qede: Fix multicast mac configurationManish Chopra1-1/+1
Driver doesn't accommodate the configuration for max number of multicast mac addresses, in such particular case it leaves the device with improper/invalid multicast configuration state, causing connectivity issues (in lacp bonding like scenarios). Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-12net: usb: lan78xx: Fix suspend/resume PHY register access errorCristian Birsan1-0/+1
Lan78xx driver accesses the PHY registers through MDIO bus over USB connection. When performing a suspend/resume, the PHY registers can be accessed before the USB connection is resumed. This will generate an error and will prevent the device to resume correctly. This patch adds the dependency between the MDIO bus and USB device to allow correct handling of suspend/resume. Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by: Cristian Birsan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-12Merge tag 'ceph-for-5.5-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds7-42/+85
Pull ceph fixes from Ilya Dryomov: "A fix to avoid a corner case when scheduling cap reclaim in batches from Xiubo, a patch to add some observability into cap waiters from Jeff and a couple of cleanups" * tag 'ceph-for-5.5-rc2' of git://github.com/ceph/ceph-client: ceph: add more debug info when decoding mdsmap ceph: switch to global cap helper ceph: trigger the reclaim work once there has enough pending caps ceph: show tasks waiting on caps in debugfs caps file ceph: convert int fields in ceph_mount_options to unsigned int
2019-12-12fs: remove ksys_dup()Dominik Brodowski3-13/+21
ksys_dup() is used only at one place in the kernel, namely to duplicate fd 0 of /dev/console to stdout and stderr. The same functionality can be achieved by using functions already available within the kernel namespace. Signed-off-by: Dominik Brodowski <[email protected]>
2019-12-12init: unify opening /dev/console as stdin/stdout/stderrDominik Brodowski3-9/+15
Merge the two instances where /dev/console is opened as stdin/stdout/stderr. Signed-off-by: Dominik Brodowski <[email protected]>
2019-12-12Merge tag 'imx-fixes-5.5' of ↵Olof Johansson5-17/+35
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5: - Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board, so that SPI NOR device can be probed. - Fix power button of E60K02 board by removing LDORTC2 regulator. - A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs"). - A couple of fixes on LS1028A SoC TMU regarding to calibration data and reboot register configuration. - Fix a regression seen on imx6ul-evk board by marking always-on for the regulator that is shared by many peripherals. - Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig. * tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: e60k02: fix power button ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon Signed-off-by: Olof Johansson <[email protected]>
2019-12-12cpufreq: Avoid leaving stale IRQ work items during CPU offlineRafael J. Wysocki4-16/+24
The scheduler code calling cpufreq_update_util() may run during CPU offline on the target CPU after the IRQ work lists have been flushed for it, so the target CPU should be prevented from running code that may queue up an IRQ work item on it at that point. Unfortunately, that may not be the case if dvfs_possible_from_any_cpu is set for at least one cpufreq policy in the system, because that allows the CPU going offline to run the utilization update callback of the cpufreq governor on behalf of another (online) CPU in some cases. If that happens, the cpufreq governor callback may queue up an IRQ work on the CPU running it, which is going offline, and the IRQ work may not be flushed after that point. Moreover, that IRQ work cannot be flushed until the "offlining" CPU goes back online, so if any other CPU calls irq_work_sync() to wait for the completion of that IRQ work, it will have to wait until the "offlining" CPU is back online and that may not happen forever. In particular, a system-wide deadlock may occur during CPU online as a result of that. The failing scenario is as follows. CPU0 is the boot CPU, so it creates a cpufreq policy and becomes the "leader" of it (policy->cpu). It cannot go offline, because it is the boot CPU. Next, other CPUs join the cpufreq policy as they go online and they leave it when they go offline. The last CPU to go offline, say CPU3, may queue up an IRQ work while running the governor callback on behalf of CPU0 after leaving the cpufreq policy because of the dvfs_possible_from_any_cpu effect described above. Then, CPU0 is the only online CPU in the system and the stale IRQ work is still queued on CPU3. When, say, CPU1 goes back online, it will run irq_work_sync() to wait for that IRQ work to complete and so it will wait for CPU3 to go back online (which may never happen even in principle), but (worse yet) CPU0 is waiting for CPU1 at that point too and a system-wide deadlock occurs. To address this problem notice that CPUs which cannot run cpufreq utilization update code for themselves (for example, because they have left the cpufreq policies that they belonged to), should also be prevented from running that code on behalf of the other CPUs that belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so in that case the cpufreq_update_util_data pointer of the CPU running the code must not be NULL as well as for the CPU which is the target of the cpufreq utilization update in progress. Accordingly, change cpufreq_this_cpu_can_update() into a regular function in kernel/sched/cpufreq.c (instead of a static inline in a header file) and make it check the cpufreq_update_util_data pointer of the local CPU if dvfs_possible_from_any_cpu is set for the target cpufreq policy. Also update the schedutil governor to do the cpufreq_this_cpu_can_update() check in the non-fast-switch case too to avoid the stale IRQ work issues. Fixes: 99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits") Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/ Reported-by: Anson Huang <[email protected]> Tested-by: Anson Huang <[email protected]> Cc: 4.14+ <[email protected]> # 4.14+ Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]> Tested-by: Peng Fan <[email protected]> (i.MX8QXP-MEK) Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-12-12cpuidle: Drop unnecessary type cast in cpuidle_poll_time()Rafael J. Wysocki1-1/+1
The data type of the target_residency_ns field in struct cpuidle_state is u64, so it does not need to be cast into u64. Get rid of the unnecessary type cast. Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-12-12blk-cgroup: remove blkcg_drain_queueGuoqing Jiang2-22/+0
Since blk_drain_queue had already been removed, so this function is not needed anymore. Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-12KVM: arm/arm64: Properly handle faulting of device mappingsMarc Zyngier1-4/+17
A device mapping is normally always mapped at Stage-2, since there is very little gain in having it faulted in. Nonetheless, it is possible to end-up in a situation where the device mapping has been removed from Stage-2 (userspace munmaped the VFIO region, and the MMU notifier did its job), but present in a userspace mapping (userpace has mapped it back at the same address). In such a situation, the device mapping will be demand-paged as the guest performs memory accesses. This requires to be careful when dealing with mapping size, cache management, and to handle potential execution of a device mapping. Reported-by: Alexandru Elisei <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Tested-by: Alexandru Elisei <[email protected]> Reviewed-by: James Morse <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2019-12-12bus: ti-sysc: Fix missing reset delay handlingTony Lindgren1-0/+4
We have dts property for "ti,sysc-delay-us", and we're using it, but the wait after OCP softreset only happens if devices are probed in legacy mode. Let's add a delay after writing the OCP softreset when specified. Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits") Cc: Keerthy <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2019-12-12pinctrl: aspeed-g6: Fix LPC/eSPI mux configurationAndrew Jeffery1-16/+8
Early revisions of the AST2600 datasheet are conflicted about the state of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED determined that the reference pinmux configuration tables were in error and the SCU documentation contained the correct configuration. Update the driver to reflect the state described in the SCU documentation. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2019-12-12block: fix NULL pointer dereference in account statistics with IDELogan Gunthorpe1-2/+3
The IDE driver creates some passthru requests which never get submitted to the block layer in such a way that blk_account_io_start() gets called. However, the driver still calls __blk_mq_end_request() in ide_end_rq() which will call blk_account_io_completion() which tries to dereferences req->part which is never set. See ide_prep_sense() for an example of where these requests come from. To fix this, blk_account_io_completion() and blk_account_io_done() should do nothing if req->part is not set. The back trace of this bug is: BUG: kernel NULL pointer dereference, address: 000002ac #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted 5.4.0-rc2-00011-g48d9b0d43105e #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd drive_rq_insert_work EIP: blk_account_io_completion+0x7a/0xf0 Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee 09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4 02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0 Call Trace: <IRQ> blk_update_request+0x85/0x420 ide_end_rq+0x38/0xa0 ide_complete_rq+0x3d/0x70 cdrom_newpc_intr+0x258/0xba0 ide_intr+0x135/0x250 __handle_irq_event_percpu+0x3e/0x250 handle_irq_event_percpu+0x1f/0x50 handle_irq_event+0x32/0x60 handle_level_irq+0x6c/0x110 handle_irq+0x72/0xa0 </IRQ> do_IRQ+0x45/0xad common_interrupt+0x115/0x11c Fixes: 48d9b0d43105 ("block: account statistics for passthrough requests") Reported-by: kernel test robot <[email protected]> Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-12drm/amdgpu: avoid using invalidate semaphore for picassochangzhu1-8/+20
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-12Revert "drm/amdgpu: dont schedule jobs while in reset"Alex Deucher1-4/+1
This reverts commit f2efc6e60089c99c342a6b7da47f1037e06c4296. This was fixed properly for 5.5, but came back via 5.4 merge into drm-next, so revert it again. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-12init: use do_mount() instead of ksys_mount()Dominik Brodowski3-16/+24
In prepare_namespace(), do_mount() can be used instead of ksys_mount() as the first and third argument are const strings in the kernel, the second and fourth argument are passed through anyway, and the fifth argument is NULL. In do_mount_root(), ksys_mount() is called with the first and third argument being already kernelspace strings, which do not need to be copied over from userspace to kernelspace (again). The second and fourth arguments are passed through to do_mount() anyway. The fifth argument, while already residing in kernelspace, needs to be put into a page of its own. Then, do_mount() can be used instead of ksys_mount(). Once this is done, there are no in-kernel users to ksys_mount() left, which can therefore be removed. Signed-off-by: Dominik Brodowski <[email protected]>
2019-12-12initrd: use do_mount() instead of ksys_mount()Dominik Brodowski1-3/+3
All three calls to ksys_mount() in initrd-related kernel code can be switched over to do_mount(): - the first and third arguments are const strings in the kernel, and do not need to be copied over from userspace; - the fifth argument is NULL, and therefore no page needs to be, copied over from userspace; - the second and fourth argument are passed through anyway. Signed-off-by: Dominik Brodowski <[email protected]>
2019-12-12devtmpfs: use do_mount() instead of ksys_mount()Dominik Brodowski3-6/+6
In devtmpfs, do_mount() can be called directly instead of complex wrapping by ksys_mount(): - the first and third arguments are const strings in the kernel, and do not need to be copied over from userspace; - the fifth argument is NULL, and therefore no page needs to be copied over from userspace; - the second and fourth argument are passed through anyway. Signed-off-by: Dominik Brodowski <[email protected]>
2019-12-12serial: sprd: Add clearing break interrupt operationYonghan Ye1-0/+3
A break interrupt will be generated if the RX line was pulled low, which means some abnomal behaviors occurred of the UART. In this case, we still need to clear this break interrupt status, otherwise it will cause irq storm to crash the whole system. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Yonghan Ye <[email protected]> Cc: stable <[email protected]> Signed-off-by: Baolin Wang <[email protected]> Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.1575460601.git.baolin.wang7@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12tty: serial: msm_serial: Fix lockup for sysrq and oopsLeo Yan1-2/+11
As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug") has mentioned the uart driver might cause recursive locking between normal printing and the kernel debugging facilities (e.g. sysrq and oops). In the commit it gave out suggestion for fixing recursive locking issue: "The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case." This patch follows the suggestion (also used the exactly same code with other serial drivers, e.g. amba-pl011.c) to fix the recursive locking issue, this can avoid stuck caused by deadlock and print out log for sysrq and oops. Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Jeffrey Hugo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12usb: dwc3: pci: add ID for the Intel Comet Lake -H variantHeikki Krogerus1-1/+5
The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by: Heikki Krogerus <[email protected]> Acked-by: Felipe Balbi <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12KVM: arm64: Ensure 'params' is initialised when looking up sys registerWill Deacon1-1/+4
Commit 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()") introduced 'find_reg_by_id()', which looks up a system register only if the 'id' index parameter identifies a valid system register. As part of the patch, existing callers of 'find_reg()' were ported over to the new interface, but this breaks 'index_to_sys_reg_desc()' in the case that the initial lookup in the vCPU target table fails because we will then call into 'find_reg()' for the system register table with an uninitialised 'param' as the key to the lookup. GCC 10 is bright enough to spot this (amongst a tonne of false positives, but hey!): | arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’: | arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized] | 983 | (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2); | [...] Revert the hunk of 4b927b94d5df which breaks 'index_to_sys_reg_desc()' so that the old behaviour of checking the index upfront is restored. Fixes: 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()") Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-12interconnect: qcom: msm8974: Walk the list safely on node removalGeorgi Djakov1-4/+4
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Reported-by: Dmitry Osipenko <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Georgi Djakov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov1-4/+4
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Georgi Djakov <[email protected]> Cc: <[email protected]> # v5.4 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov1-2/+2
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Georgi Djakov <[email protected]> Cc: <[email protected]> # v5.3+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12interconnect: qcom: Fix Kconfig indentationKrzysztof Kozlowski1-7/+7
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Georgi Djakov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-12nios2: Fix ioremapGuenter Roeck1-0/+8
Commit 5ace77e0b41a ("nios2: remove __ioremap") removed the following code, with the argument that cacheflag is always 0 and the expression would therefore always be false. if (IS_MAPPABLE_UNCACHEABLE(phys_addr) && IS_MAPPABLE_UNCACHEABLE(last_addr) && !(cacheflag & _PAGE_CACHED)) return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr); This did not take the "!" in the expression into account. Result is that nios2 images no longer boot. Restoring the removed code fixes the problem. Fixes: 5ace77e0b41a ("nios2: remove __ioremap") Cc: Christoph Hellwig <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]>
2019-12-12crypto: arm/curve25519 - add arch-specific key generation functionJason A. Donenfeld1-0/+7
Somehow this was forgotten when Zinc was being split into oddly shaped pieces, resulting in linker errors. The x86_64 glue has a specific key generation implementation, but the Arm one does not. However, it can still receive the NEON speedups by calling the ordinary DH function using the base point. Signed-off-by: Jason A. Donenfeld <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2019-12-12Merge branch 'linux-5.5' of git://github.com/skeggsb/linux into drm-fixesDave Airlie5-109/+149
Bunch of random nouveau fixes. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv56Am90okV334eXgxDuK228sb9UJxMiOYjNAMShvvv4cg@mail.gmail.com
2019-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller10-18/+126
Alexei Starovoitov says: ==================== pull-request: bpf 2019-12-11 The following pull-request contains BPF updates for your *net* tree. We've added 8 non-merge commits during the last 1 day(s) which contain a total of 10 files changed, 126 insertions(+), 18 deletions(-). The main changes are: 1) Make BPF trampoline co-exist with ftrace-based tracers, from Alexei. 2) Fix build in minimal configurations, from Arnd. 3) Fix mips, riscv bpf_tail_call limit, from Paul. 4) Fix bpftool segfault, from Toke. 5) Fix samples/bpf, from Daniel. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-12-11Merge branch 'md-fixes' of ↵Jens Axboe3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-linus Pull MD fixes from Song. * 'md-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: make sure desc_nr less than MD_SB_DISKS md: raid1: check rdev before reference in raid1_sync_request func raid5: need to set STRIPE_HANDLE for batch head
2019-12-12Merge tag 'drm-misc-fixes-2019-12-11' of ↵Dave Airlie2-21/+28
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Expand dma-buf MAINTAINER scope - Fix mode matching for drivers not using picture_aspect_ratio Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20191211212107.GA257983@art_vandelay
2019-12-12ARM: imx: Fix boot crash if ocotp is not foundLeonard Crestez1-1/+3
The imx_soc_device_init functions tries to fetch the ocotp regmap in order to soc serial number. If regmap fetch fails then a message is printed but regmap_read is called anyway and the system crashes. Failing to lookup ocotp regmap shouldn't be a fatal boot error so check that the pointer is valid. Only side-effect of ocotp lookup failure now is that serial number will be reported as all-zeros which is acceptable. Cc: [email protected] Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") Signed-off-by: Leonard Crestez <[email protected]> Tested-by: Christoph Niedermaier <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-12-11Merge tag 'afs-fixes-20191211' of ↵Linus Torvalds5-19/+20
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Fixes for AFS plus one patch to make debugging easier: - Fix how addresses are matched to server records. This is currently incorrect which means cache invalidation callbacks from the server don't necessarily get delivered correctly. This causes stale data and metadata to be seen under some circumstances. - Make the dynamic root superblock R/W so that rpm/dnf can reapply the SELinux label to it when upgrading the Fedora filesystem-afs package. If the filesystem is R/O, this fails and the upgrade fails. It might be better in future to allow setxattr from an LSM to bypass the R/O protections, if only for pseudo-filesystems. - Fix the parsing of mountpoint strings. The mountpoint object has to have a terminal dot, whereas the source/device string passed to mount should not. This confuses type-forcing suffix detection leading to the wrong volume variant being mounted. - Make lookups in the dynamic root superblock for creation events (such as mkdir) fail with EOPNOTSUPP rather than something like EEXIST. The dynamic root only allows implicit creation by the ->lookup() method - and only if the target cell exists. - Fix the looking up of an AFS superblock to include the cell in the matching key - otherwise all volumes with the same ID number are treated as the same thing, irrespective of which cell they're in. - Show the volume name of each volume in the volume records displayed in /proc/net/afs/<cell>/volumes. This proved useful in debugging as it provides a way to map the volume IDs to names, where the names are what appear in /proc/mounts" * tag 'afs-fixes-20191211' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Show volume name in /proc/net/afs/<cell>/volumes afs: Fix missing cell comparison in afs_test_super() afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP afs: Fix mountpoint parsing afs: Fix SELinux setting security label on /afs afs: Fix afs_find_server lookups for ipv4 peers
2019-12-12ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FSLeonard Crestez1-0/+1
This is currently off and that's not desirable: default imx config is meant to be generally useful for development and debugging. Running git bisect between v5.4 and v5.5-rc1 finds this started from commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Explicit CONFIG_DEBUG_FS=y was earlier removed by commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options") A very similar fix was required before: commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-12-12ARM: dts: imx6ul-evk: Fix peripheral regulatorLeonard Crestez1-6/+20
Many peripherals are affected by gpio5/2, not just sensors. One of those is ethernet phy so network boot is current broken. Fix by renaming reg_sensors and marking it as "always on". Also add a comment asking for careful testing if this is to be made dynamic in the future. The "peri_3v3" naming is similar to imx6sx-sdb and regulator-name is same string as in schematics (VPERI_3V3). Fixes: 09e2b1048954 ("ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator") Signed-off-by: Leonard Crestez <[email protected]> Reviewed-by: Marco Felsch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-12-12arm64: dts: ls1028a: fix reboot nodeMichael Walle1-1/+7
The reboot register isn't located inside the DCFG controller, but in its own RST controller. Fix it. Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle <[email protected]> Acked-by: Li Yang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-12-11tools/testing/nvdimm: Fix mock support for ioremapDan Williams2-0/+7
After commit d092a8707326 "arch: rely on asm-generic/io.h for default ioremap_* definitions" the ioremap_nocache() symbol has been replaced with ioremap(). Update the mocked symbol list for nvdimm testing. Link: https://lore.kernel.org/r/157369090817.2974548.10148423996292973088.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: d092a8707326 ("arch: rely on asm-generic/io.h for default ioremap_* definitions") Signed-off-by: Dan Williams <[email protected]>
2019-12-11samples: bpf: fix syscall_tp due to unused syscallDaniel T. Lee1-2/+16
Currently, open() is called from the user program and it calls the syscall 'sys_openat', not the 'sys_open'. This leads to an error of the program of user side, due to the fact that the counter maps are zero since no function such 'sys_open' is called. This commit adds the kernel bpf program which are attached to the tracepoint 'sys_enter_openat' and 'sys_enter_openat'. Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints") Signed-off-by: Daniel T. Lee <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-12-11samples: bpf: Replace symbol compare of trace_eventDaniel T. Lee1-2/+2
Previously, when this sample is added, commit 1c47910ef8013 ("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and 'sys_write' has been used without no prefixes. But currently there are no exact symbols with these under kallsyms and this leads to failure. This commit changes exact compare to substring compare to keep compatible with exact symbol or prefixed symbol. Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example") Signed-off-by: Daniel T. Lee <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2019-12-11selftests/bpf: Test function_graph tracer and bpf trampoline togetherAlexei Starovoitov1-0/+39
Add simple test script to execute funciton graph tracer while BPF trampoline attaches and detaches from the functions being graph traced. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2019-12-11bpf: Make BPF trampoline use register_ftrace_direct() APIAlexei Starovoitov2-6/+59
Make BPF trampoline attach its generated assembly code to kernel functions via register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF trampoline on the same kernel function. It also switches attaching logic from arch specific text_poke to generic ftrace that is available on many architectures. text_poke is still necessary for bpf-to-bpf attach and for bpf_tail_call optimization. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2019-12-11io_uring: ensure we return -EINVAL on unknown opcodeJens Axboe2-24/+36
If we submit an unknown opcode and have fd == -1, io_op_needs_file() will return true as we default to needing a file. Then when we go and assign the file, we find the 'fd' invalid and return -EBADF. We really should be returning -EINVAL for that case, as we normally do for unsupported opcodes. Change io_op_needs_file() to have the following return values: 0 - does not need a file 1 - does need a file < 0 - error value and use this to pass back the right value for this invalid case. Signed-off-by: Jens Axboe <[email protected]>
2019-12-11xfs: stabilize insert range start boundary to avoid COW writeback raceBrian Foster2-2/+13
generic/522 (fsx) occasionally fails with a file corruption due to an insert range operation. The primary characteristic of the corruption is a misplaced insert range operation that differs from the requested target offset. The reason for this behavior is a race between the extent shift sequence of an insert range and a COW writeback completion that causes a front merge with the first extent in the shift. The shift preparation function flushes and unmaps from the target offset of the operation to the end of the file to ensure no modifications can be made and page cache is invalidated before file data is shifted. An insert range operation then splits the extent at the target offset, if necessary, and begins to shift the start offset of each extent starting from the end of the file to the start offset. The shift sequence operates at extent level and so depends on the preparation sequence to guarantee no changes can be made to the target range during the shift. If the block immediately prior to the target offset was dirty and shared, however, it can undergo writeback and move from the COW fork to the data fork at any point during the shift. If the block is contiguous with the block at the start offset of the insert range, it can front merge and alter the start offset of the extent. Once the shift sequence reaches the target offset, it shifts based on the latest start offset and silently changes the target offset of the operation and corrupts the file. To address this problem, update the shift preparation code to stabilize the start boundary along with the full range of the insert. Also update the existing corruption check to fail if any extent is shifted with a start offset behind the target offset of the insert range. This prevents insert from racing with COW writeback completion and fails loudly in the event of an unexpected extent shift. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-11xfs: fix Sphinx documentation warningRandy Dunlap1-1/+1
Fix Sphinx documentation format warning by not indenting so much. Documentation/admin-guide/xfs.rst:257: WARNING: Block quote ends without a blank line; unexpected unindent. Signed-off-by: Randy Dunlap <[email protected]> Cc: Darrick J. Wong <[email protected]> Cc: [email protected] Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-11Merge tag 'erofs-for-5.5-rc2-fixes' of ↵Linus Torvalds2-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "Mainly address a regression reported by David recently observed together with overlayfs due to the improper return value of listxattr() without xattr. Update outdated expressions in document as well. Summary: - Fix improper return value of listxattr() with no xattr - Keep up documentation with latest code" * tag 'erofs-for-5.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: update documentation erofs: zero out when listxattr is called with no xattr
2019-12-11Merge tag 'trace-v5.5-3' of ↵Linus Torvalds6-33/+22
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Remove code I accidentally applied when doing a minor fix up to a patch, and then using "git commit -a --amend", which pulled in some other changes I was playing with. - Remove an used variable in trace_events_inject code - Fix function graph tracer when it traces a ftrace direct function. It will now ignore tracing a function that has a ftrace direct tramploine attached. This is needed for eBPF to use the ftrace direct code. * tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix function_graph tracer interaction with BPF trampoline tracing: remove set but not used variable 'buffer' module: Remove accidental change of module_enable_x()
2019-12-11pipe: simplify signal handling in pipe_read() and add commentsLinus Torvalds1-7/+29
There's no need to separately check for signals while inside the locked region, since we're going to do "wait_event_interruptible()" right afterwards anyway, and the error handling is much simpler there. The check for whether we had already read anything was also redundant, since we no longer do the odd merging of reads when there are pending writers. But perhaps more importantly, this adds commentary about why we still need to wake up possible writers even though we didn't read any data, and why we can skip all the finishing touches now if we get a signal (or had a signal pending) while waiting for more data. [ This is a split-out cleanup from my "make pipe IO use exclusive wait queues" thing, which I can't apply because it triggers a nasty bug in the GNU make jobserver - Linus ] Signed-off-by: Linus Torvalds <[email protected]>
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher7-4/+7
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.