aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-09Revert "net/mlx5: Arm only EQs with EQEs"Shay Drory1-2/+4
In the scenario described below, an EQ can remain in FIRED state which can result in missing an interrupt generation. The scenario: device mlx5_core driver ------ ---------------- EQ1.eqe generated EQ1.MSI-X sent EQ1.state = FIRED EQ2.eqe generated mlx5_irq() polls - eq1_eqes() arm eq1 polls - eq2_eqes() arm eq2 EQ2.MSI-X sent EQ2.state = FIRED mlx5_irq() polls - eq2_eqes() -- no eqes found driver skips EQ arming; ->EQ2 remains fired, misses generating interrupt. Hence, always arm the EQ by reverting the cited commit in fixes tag. Fixes: d894892dda25 ("net/mlx5: Arm only EQs with EQEs") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Fix select queue to consider SKBTX_HW_TSTAMPAya Levin3-23/+25
Steering packets to PTP-SQ should be done only if the SKB has SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into a header and inline it. Set the whole condition to select the PTP-SQ to unlikely. Fixes: 24c22dd0918b ("net/mlx5e: Add states to PTP channel") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Don't update netdev RQs with PTP-RQAya Levin1-2/+0
Since the driver opens the PTP-RQ under channel 0, it appears to the stack as if the SKB was received on rxq0. So from thew stack POV there are still the same number of RX queues. Fixes: 960fbfe222a4 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Verify dev is present in get devlink port ndoChris Mi1-0/+2
When changing eswitch mode, the netdev is detached from the hardware resources. So verify dev is present in get devlink port ndo. Otherwise, we will hit the following panic: [241535.973539] RIP: 0010:__devlink_port_phys_port_name_get+0x13/0x1b0 [241535.976471] RSP: 0018:ffff9eaf0ae1b7c8 EFLAGS: 00010292 [241535.977471] RAX: 000000000002d370 RBX: 000000000002d370 RCX: 0000000000000000 [241535.978479] RDX: 0000000000000010 RSI: ffff9eaf0ae1b858 RDI: 000000000002d370 [241535.979482] RBP: ffff9eaf0ae1b7e0 R08: 000000000000002a R09: ffff8888d54d13da [241535.980486] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8888e6700000 [241535.981491] R13: ffff9eaf0ae1b858 R14: 0000000000000010 R15: 0000000000000000 [241535.982489] FS: 00007fd374ef3740(0000) GS:ffff88909ea00000(0000) knlGS:0000000000000000 [241535.983494] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [241535.984487] CR2: 000000000002d444 CR3: 000000089fd26006 CR4: 00000000003706e0 [241535.985502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [241535.986499] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [241535.987477] Call Trace: [241535.988426] ? nla_put_64bit+0x71/0xa0 [241535.989368] devlink_compat_phys_port_name_get+0x50/0xa0 [241535.990312] dev_get_phys_port_name+0x4b/0x60 [241535.991252] rtnl_fill_ifinfo+0x57b/0xcb0 [241535.992192] rtnl_dump_ifinfo+0x58f/0x6d0 [241535.993123] ? ksize+0x14/0x20 [241535.994033] ? __alloc_skb+0xe8/0x250 [241535.994935] netlink_dump+0x17c/0x300 [241535.995821] netlink_recvmsg+0x1de/0x2c0 [241535.996677] sock_recvmsg+0x70/0x80 [241535.997518] ____sys_recvmsg+0x9b/0x1b0 [241535.998360] ? iovec_from_user+0x82/0x120 [241535.999202] ? __import_iovec+0x2c/0x130 [241536.000031] ___sys_recvmsg+0x94/0x130 [241536.000850] ? __handle_mm_fault+0x56d/0x6e0 [241536.001668] __sys_recvmsg+0x5f/0xb0 [241536.002464] ? syscall_enter_from_user_mode+0x2b/0x80 [241536.003242] __x64_sys_recvmsg+0x1f/0x30 [241536.004008] do_syscall_64+0x38/0x50 [241536.004767] entry_SYSCALL_64_after_hwframe+0x44/0xae [241536.005532] RIP: 0033:0x7fd375014f47 Fixes: 2ff349c5edfe ("net/mlx5e: Verify dev is present in some ndos") Signed-off-by: Roi Dayan <[email protected]> Signed-off-by: Chris Mi <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5: DR, Don't use SW steering when RoCE is not supportedMaor Gottlieb1-4/+5
SW steering uses RC QP to write/read to/from ICM, hence it's not supported when RoCE is not supported as well. Fixes: 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Reviewed-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5: Consider RoCE cap before init RDMA resourcesMaor Gottlieb1-0/+3
Check if RoCE is supported by the device before enable it in the vport context and create all the RDMA steering objects. Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Fix page reclaim for dead peer hairpinDima Chumak3-7/+26
When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.001026] RIP: 0033:0x7f58bcfb22f7 [ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7 [ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003 [ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001 [ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d [ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700 [ 748.001564] irq event stamp: 0 [ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0 [ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0 [ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 748.001492] ---[ end trace a6fabd773d1c51ae ]--- Fix by destroying the send queue of a hairpin peer net device that is being removed/unbound, which returns the allocated ring buffer pages to the host. Fixes: 4d8fcf216c90 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules") Signed-off-by: Dima Chumak <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Remove dependency in IPsec initialization flowsHuy Nguyen1-3/+0
Currently, IPsec feature is disabled because mlx5e_build_nic_netdev is required to be called after mlx5e_ipsec_init. This requirement is invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize independent resources. Remove ipsec pointer check in mlx5e_build_nic_netdev so that the two functions can be called at any order. Fixes: 547eede070eb ("net/mlx5e: IPSec, Innova IPSec offload infrastructure") Signed-off-by: Huy Nguyen <[email protected]> Reviewed-by: Raed Salem <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Fix use-after-free of encap entry in neigh update handlerVlad Buslov4-17/+40
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core] [23827.537305] mlx5e_flow_put+0x49/0x80 [mlx5_core] [23827.538290] mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core] [23827.539300] tc_setup_cb_destroy+0x18e/0x2f0 [23827.540144] fl_hw_destroy_filter+0x1d2/0x310 [cls_flower] [23827.541148] __fl_delete+0x4dc/0x660 [cls_flower] [23827.541985] fl_delete+0x97/0x160 [cls_flower] [23827.542782] tc_del_tfilter+0x7ab/0x13d0 [23827.543503] rtnetlink_rcv_msg+0x644/0x8c0 [23827.544257] netlink_rcv_skb+0x11d/0x340 [23827.544981] netlink_unicast+0x42b/0x700 [23827.545700] netlink_sendmsg+0x743/0xc20 [23827.546424] sock_sendmsg+0xb2/0xe0 [23827.547084] ____sys_sendmsg+0x590/0x770 [23827.547850] ___sys_sendmsg+0xd8/0x160 [23827.548606] __sys_sendmsg+0xb7/0x140 [23827.549303] do_syscall_64+0x3a/0x70 [23827.549969] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.550853] [23827.551217] The buggy address belongs to the object at ffff8881d1322200 [23827.551217] which belongs to the cache kmalloc-256 of size 256 [23827.553341] The buggy address is located 140 bytes inside of [23827.553341] 256-byte region [ffff8881d1322200, ffff8881d1322300) [23827.555747] The buggy address belongs to the page: [23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320 [23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0 [23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40 [23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [23827.564112] page dumped because: kasan: bad access detected [23827.565439] [23827.565932] Memory state around the buggy address: [23827.566917] ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.568485] ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.571143] ^ [23827.571879] ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.573283] ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.574654] ================================================================== Most of the necessary logic is already correctly implemented by mlx5e_get_next_valid_encap() helper that is used in neigh stats update handler. Make the handler generic by renaming it to mlx5e_get_next_matching_encap() and use callback to test whether flow is matching instead of hardcoded check for 'valid' flag value. Implement mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap() with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new mlx5e_get_next_init_encap() helper by calling mlx5e_get_next_matching_encap() with callback that tests encap completion result to be non-error and use it in mlx5e_rep_neigh_update() to safely iterate over nhe->encap_list. Remove encap completion logic from mlx5e_rep_update_flows() since the encap entries passed to this function are already guaranteed to be properly initialized by similar code in mlx5e_get_next_init_encap(). Fixes: 2a1f1768fa17 ("net/mlx5e: Refactor neigh update for concurrent execution") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09net/mlx5e: Fix an error code in mlx5e_arfs_create_tables()Yang Li1-1/+1
When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0. So, we use -ENOMEM to indicate that the function create_singlethread_workqueue() return NULL. Clean up smatch warning: drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373 mlx5e_arfs_create_tables() warn: missing error code 'err'. Reported-by: Abaci Robot <[email protected]> Fixes: f6755b80d693 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed") Signed-off-by: Yang Li <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-09Merge branch '100GbE' of ↵David S. Miller2-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-06-09 This series contains updates to ice driver only. Maciej informs the user when XDP is not supported due to the driver being in the 'safe mode' state. He also adds a parameter to Tx queue configuration to resolve an issue in configuring XDP queues as it cannot rely on using the number Tx or Rx queues. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-09net/sched: act_ct: handle DNAT tuple collisionMarcelo Ricardo Leitner1-8/+13
This this the counterpart of 8aa7b526dc0b ("openvswitch: handle DNAT tuple collision") for act_ct. From that commit changelog: """ With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. ... Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. """ Fixes: 95219afbb980 ("act_ct: support asymmetric conntrack") Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-09Merge tag 'platform-drivers-x86-v5.13-3' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Assorted pdx86 bug-fixes and some hardware-id additions for 5.13. The mlxreg-hotplug revert is a regression-fix" * tag 'platform-drivers-x86-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag" platform/surface: dtx: Add missing mutex_destroy() call in failure path platform/surface: aggregator: Fix event disable function platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support platform/surface: aggregator_registry: Add support for 13" Intel Surface Laptop 4 platform/surface: aggregator_registry: Update comments for 15" AMD Surface Laptop 4
2021-06-09rtnetlink: Fix regression in bridge VLAN configurationIdo Schimmel1-3/+5
Cited commit started returning errors when notification info is not filled by the bridge driver, resulting in the following regression: # ip link add name br1 type bridge vlan_filtering 1 # bridge vlan add dev br1 vid 555 self pvid untagged RTNETLINK answers: Invalid argument As long as the bridge driver does not fill notification info for the bridge device itself, an empty notification should not be considered as an error. This is explained in commit 59ccaaaa49b5 ("bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify"). Fix by removing the error and add a comment to avoid future bugs. Fixes: a8db57c1d285 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-09Merge tag 'compiler-attributes-for-linus-v5.13-rc6' of ↵Linus Torvalds1-0/+1
git://github.com/ojeda/linux Pull compiler attribute update from Miguel Ojeda: "A trivial update to the compiler attributes: Add 'continue' keyword to documentation in comment (from Wei Ming Chen)" * tag 'compiler-attributes-for-linus-v5.13-rc6' of git://github.com/ojeda/linux: Compiler Attributes: Add continue in comment
2021-06-09Merge tag 'clang-format-for-linus-v5.13-rc6' of git://github.com/ojeda/linuxLinus Torvalds1-2/+11
Pull clang-format update from Miguel Ojeda: "The usual update for `clang-format`" * tag 'clang-format-for-linus-v5.13-rc6' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list
2021-06-09Merge tag 'mac80211-for-net-2021-06-09' of ↵David S. Miller14-52/+109
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== A fair number of fixes: * fix more fallout from RTNL locking changes * fixes for some of the bugs found by syzbot * drop multicast fragments in mac80211 to align with the spec and what drivers are doing now * fix NULL-ptr deref in radiotap injection ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-09kvm: LAPIC: Restore guard to prevent illegal APIC register accessJim Mattson1-0/+3
Per the SDM, "any access that touches bytes 4 through 15 of an APIC register may cause undefined behavior and must not be executed." Worse, such an access in kvm_lapic_reg_read can result in a leak of kernel stack contents. Prior to commit 01402cf81051 ("kvm: LAPIC: write down valid APIC registers"), such an access was explicitly disallowed. Restore the guard that was removed in that commit. Fixes: 01402cf81051 ("kvm: LAPIC: write down valid APIC registers") Signed-off-by: Jim Mattson <[email protected]> Reported-by: syzbot <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-09udp: fix race between close() and udp_abort()Paolo Abeni2-0/+13
Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by: Kaustubh Pandey <[email protected]> Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-09inet: annotate data race in inet_send_prepare() and inet_dgram_connect()Eric Dumazet1-2/+2
Both functions are known to be racy when reading inet_num as we do not want to grab locks for the common case the socket has been bound already. The race is resolved in inet_autobind() by reading again inet_num under the socket lock. syzbot reported: BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0: udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308 udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89 inet_autobind net/ipv4/af_inet.c:183 [inline] inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1: inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x9db4 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-09net: ethtool: clear heap allocations for ethtool functionAustin Kim1-5/+5
Several ethtool functions leave heap uncleared (potentially) by drivers. This will leave the unused portion of heap unchanged and might copy the full contents back to userspace. Signed-off-by: Austin Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-09Merge tag 'for-5.13-rc5-tag' of ↵Linus Torvalds4-15/+54
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes that people hit during testing. Zoned mode fix: - fix 32bit value wrapping when calculating superblock offsets Error handling fixes: - properly check filesystema and device uuids - properly return errors when marking extents as written - do not write supers if we have an fs error" * tag 'for-5.13-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: promote debugging asserts to full-fledged checks in validate_super btrfs: return value from btrfs_mark_extent_written() in case of error btrfs: zoned: fix zone number to sector/physical calculation btrfs: do not write supers if we have an fs error
2021-06-09ice: parameterize functions responsible for Tx ring managementMaciej Fijalkowski1-8/+10
Commit ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match number of Rx queues") tried to address the incorrect setting of XDP queue count that was based on the Tx queue count, whereas in theory we should provide the XDP queue per Rx queue. However, the routines that setup and destroy the set of Tx resources are still based on the vsi->num_txq. Ice supports the asynchronous Tx/Rx queue count, so for a setup where vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs will be accessing the vsi->xdp_rings out of the bounds. Parameterize two mentioned functions so they get the size of Tx resources array as the input. Fixes: ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match number of Rx queues") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-09ice: add ndo_bpf callback for safe mode netdev opsMaciej Fijalkowski1-0/+15
ice driver requires a programmable pipeline firmware package in order to have a support for advanced features. Otherwise, driver falls back to so called 'safe mode'. For that mode, ndo_bpf callback is not exposed and when user tries to load XDP program, the following happens: $ sudo ./xdp1 enp179s0f1 libbpf: Kernel error message: Underlying driver does not support XDP in native mode link set xdp fd failed which is sort of confusing, as there is a native XDP support, but not in the current mode. Improve the user experience by providing the specific ndo_bpf callback dedicated for safe mode which will make use of extack to explicitly let the user know that the DDP package is missing and that's the reason that the XDP can't be loaded onto interface currently. Cc: Jamal Hadi Salim <[email protected]> Fixes: efc2214b6047 ("ice: Add support for XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-39/+105
Pull kvm fixes from Paolo Bonzini: "Bugfixes, including a TLB flush fix that affects processors without nested page tables" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: fix previous commit for 32-bit builds kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message selftests: kvm: Add support for customized slot0 memory size KVM: selftests: introduce P47V64 for s390x KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior KVM: X86: MMU: Use the correct inherited permissions to get shadow page KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821cee
2021-06-09netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-localFlorian Westphal1-4/+18
The ip6tables rpfilter match has an extra check to skip packets with "::" source address. Extend this to ipv6 fib expression. Else ipv6 duplicate address detection packets will fail rpf route check -- lookup returns -ENETUNREACH. While at it, extend the prerouting check to also cover the ingress hook. Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1543 Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-06-09selftests: netfilter: add fib test caseFlorian Westphal2-1/+222
There is a bug report on netfilter.org bugzilla pointing to fib expression dropping ipv6 DAD packets. Add a test case that demonstrates this problem. Next patch excludes icmpv6 packets coming from any to linklocal. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-06-09netfilter: nf_tables: initialize set before expression setupPablo Neira Ayuso1-42/+43
nft_set_elem_expr_alloc() needs an initialized set if expression sets on the NFT_EXPR_GC flag. Move set fields initialization before expression setup. [4512935.019450] ================================================================== [4512935.019456] BUG: KASAN: null-ptr-deref in nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019487] Read of size 8 at addr 0000000000000070 by task nft/23532 [4512935.019494] CPU: 1 PID: 23532 Comm: nft Not tainted 5.12.0-rc4+ #48 [...] [4512935.019502] Call Trace: [4512935.019505] dump_stack+0x89/0xb4 [4512935.019512] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019536] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019560] kasan_report.cold.12+0x5f/0xd8 [4512935.019566] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019590] nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019615] nf_tables_newset+0xc7f/0x1460 [nf_tables] Reported-by: [email protected] Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-06-09hwmon: (scpi-hwmon) shows the negative temperature properlyRiwen Lu1-0/+9
The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <[email protected]> Tested-by: Xin Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-09hwmon: (corsair-psu) fix suspend behaviorWilken Gottwalt1-0/+14
During standby some PSUs turn off the microcontroller. A re-init is required during resume or the microcontroller stays unresponsive. Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-09dt-bindings: hwmon: Fix typo in TI ADS7828 bindingsNobuhiro Iwamatsu1-1/+1
Fix typo in example for DT binding, changed from 'comatible' to 'compatible'. Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-09misc: rtsx: separate aspm mode into MODE_REG and MODE_CFGRicky Wu10-13/+44
aspm (Active State Power Management) rtsx_comm_set_aspm: this function is for driver to make sure not enter power saving when processing of init and card_detcct ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250 Change back to use original way to control aspm ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228 Keep the new way to control aspm Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Reported-by: Chris Chiu <[email protected]> Tested-by: Gordon Lack <[email protected]> Cc: stable <[email protected]> Signed-off-by: Ricky Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci-generic: Fix hibernationLoic Poulain1-1/+35
This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/[email protected] Reported-by: Shujun Wang <[email protected]> Cc: stable <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()Wei Yongjun1-1/+1
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/[email protected] Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <[email protected]> Reported-by: Hulk Robot <[email protected]> Reviewed-by: Hemant kumar <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Loic Poulain <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci_generic: T99W175: update channel name from AT to DUNJarvis Jiang1-2/+2
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/[email protected] [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Jarvis Jiang <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09mac80211: drop multicast fragmentsJohannes Berg1-6/+3
These are not permitted by the spec, just drop them. Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-06-09mac80211: move interface shutdown out of wiphy lockJohannes Berg3-4/+12
When reconfiguration fails, we shut down everything, but we cannot call cfg80211_shutdown_all_interfaces() with the wiphy mutex held. Since cfg80211 now calls it on resume errors, we only need to do likewise for where we call reconfig (whether directly or indirectly), but not under the wiphy lock. Cc: [email protected] Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-06-09cfg80211: shut down interfaces on failed resumeJohannes Berg1-0/+4
If resume fails, we should shut down all interfaces as the hardware is probably dead. This was/is already done now in mac80211, but we need to change that due to locking issues, so move it here and do it without the wiphy lock held. Cc: [email protected] Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.d564ca69de7c.I2e3c3e5d410b72a4f63bade4fb075df041b3d92f@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-06-09cfg80211: fix phy80211 symlink creationJohannes Berg1-8/+5
When I moved around the code here, I neglected that we could still call register_netdev() or similar without the wiphy mutex held, which then calls cfg80211_register_wdev() - that's also done from cfg80211_register_netdevice(), but the phy80211 symlink creation was only there. Now, the symlink isn't needed for a *pure* wdev, but a netdev not registered via cfg80211_register_wdev() should still have the symlink, so move the creation to the right place. Cc: [email protected] Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.a5dc4c1e488c.Ia42fe663cefe47b0883af78c98f284c5555bbe5d@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-06-09mac80211: fix 'reset' debugfs lockingJohannes Berg1-1/+3
cfg80211 now calls suspend/resume with the wiphy lock held, and while there's a problem with that needing to be fixed, we should do the same in debugfs. Cc: [email protected] Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210608113226.14020430e449.I78e19db0a55a8295a376e15ac4cf77dbb4c6fb51@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-06-09serial: 8250_exar: Avoid NULL pointer dereference at ->exit()Andy Shevchenko1-1/+5
It's possible that during ->exit() the private_data is NULL, for instance when there was no GPIO device instantiated. Due to this we may not dereference it. Add a respective check. Note, for now ->exit() only makes sense when GPIO device was instantiated, that's why we may use the check for entire function. Fixes: 81171e7d31a6 ("serial: 8250_exar: Constify the software nodes") Reported-by: Maxim Levitsky <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Maxim Levitsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09ACPI: Pass the same capabilities to the _OSC regardless of the query flagMika Westerberg1-19/+8
Commit 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") makes acpi_bus_osc_negotiate_platform_control() not only query the platforms capabilities but it also commits the result back to the firmware to report which capabilities are supported by the OS back to the firmware On certain systems the BIOS loads SSDT tables dynamically based on the capabilities the OS claims to support. However, on these systems the _OSC actually clears some of the bits (under certain conditions) so what happens is that now when we call the _OSC twice the second time we pass the cleared values and that results errors like below to appear on the system log: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330) ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529) In addition the ACPI 6.4 spec says following [1]: If the OS declares support of a feature in the Support Field in one call to _OSC, then it must preserve the set state of that bit (declaring support for that feature) in all subsequent calls. Based on the above we can fix the issue by passing the same set of capabilities to the platform wide _OSC in both calls regardless of the query flag. While there drop the context.ret.length checks which were wrong to begin with (as the length is number of bytes not elements). This is already checked in acpi_run_osc() that also returns an error in that case. Includes fixes by Hans de Goede. [1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717 Fixes: 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") Cc: 5.12+ <[email protected]> # 5.12+ Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-06-09drm/mcde: Fix off by 10^3 in calculationLinus Walleij1-1/+1
The calclulation of how many bytes we stuff into the DSI pipeline for video mode panels is off by three orders of magnitude because we did not account for the fact that the DRM mode clock is in kilohertz rather than hertz. This used to be: drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal which would become for example for s6e63m0: 60 x 514 x 831 = 25628040 Hz, but mode->clock is 25628 as it is in kHz. This affects only the Samsung GT-I8190 "Golden" phone right now since it is the only MCDE device with a video mode display. Curiously some specimen work with this code and wild settings in the EOL and empty packets at the end of the display, but I have noticed an eeire flicker until now. Others were not so lucky and got black screens. Cc: Ville Syrjälä <[email protected]> Reported-by: Stephan Gerhold <[email protected]> Fixes: 920dd1b1425b ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh") Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-09pinctrl: qcom: Make it possible to select SC8180x TLMMBjorn Andersson1-1/+1
It's currently not possible to select the SC8180x TLMM driver, due to it selecting PINCTRL_MSM, rather than depending on the same. Fix this. Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver") Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2021-06-09staging: ralink-gdma: Remove incorrect author informationLars-Peter Clausen1-2/+0
Lars did not write the ralink-gdma driver. Looks like his name just got copy&pasted from another similar DMA driver. Remove his name from the copyright and MODULE_AUTHOR. Signed-off-by: Lars-Peter Clausen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09staging: rtl8723bs: Fix uninitialized variablesWenli Looi1-1/+1
The sinfo.pertid and sinfo.generation variables are not initialized and it causes a crash when we use this as a wireless access point. [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ snip ] [ 457.271004] Backtrace: [ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4) [ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00 [ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc) [ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000 [ 457.309586] r4:ec46d9e0 [ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs]) [ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c [ 457.332831] r4:c1606788 [ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs]) [ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000 [ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs]) [ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000 [ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs]) [ 457.384744] r5:f086e000 r4:f086c000 [ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174) [ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200 [ 457.406828] r4:e8369900 [ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8) [ 457.423356] ffa0: 00000000 00000000 00000000 00000000 [ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4 [ 457.457750] r4:e9975200 [ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2) [ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]--- Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/ Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps") Signed-off-by: Wenli Looi <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: misc: brcmstb-usb-pinmap: check return value after calling ↵Yang Yingliang1-0/+2
platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals") Cc: stable <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: dwc3: ep0: fix NULL pointer exceptionMarian-Cristian Rotariu1-0/+3
There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- Signed-off-by: Marian-Cristian Rotariu <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: eem: fix wrong eem header operationLinyu Yuan1-2/+2
when skb_clone() or skb_copy_expand() fail, it should pull skb with lengh indicated by header, or not it will read network data and check it as header. Cc: <[email protected]> Signed-off-by: Linyu Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()Andy Shevchenko1-4/+4
For ACPI devices we have a symmetric API to put them, so use it in the driver. Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.