aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-04-01Merge branch 'merge' of ↵Linus Torvalds15-223/+272
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: kdump: Allow shrinking of kdump region to be overridden powerpc/pmac/smp: Remove no-longer needed preempt workaround powerpc/smp: Increase vdso_data->processorCount, not just decrease it powerpc/smp: Create idle threads on demand and properly reset them powerpc/smp: Don't expose per-cpu "cpu_state" array powerpc/pmac/smp: Fix CPU hotplug crashes on some machines powerpc/smp: Add a smp_ops->bringup_up() done callback powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collision powerpc/pmac/smp: Properly NAP offlined CPU on G5 powerpc/pmac/smp: Remove HMT changes for PowerMac offline code powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one file powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bit powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32 powerpc/pmac/smp: Fix 32-bit PowerMac cpu_die powerpc/smp: Remove unused smp_ops->cpu_enable() powerpc/smp: Remove unused generic_cpu_enable() powerpc/smp: Fix generic_mach_cpu_die() powerpc/smp: soft-replugged CPUs must go back to start_secondary powerpc: Make decrementer interrupt robust against offlined CPUs
2011-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds17-41/+32
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Pass task_struct to schedule_tail() in ret_from_fork apbuart: Depend upon sparc. sparc64: Fix section mis-match errors. sparc32,leon: Fixed APBUART frequency detection sparc32, leon: APBUART driver must use archdata to get IRQ number sparc: Hook up syncfs system call.
2011-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds29-224/+543
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: appletalk: Fix OOPS in atalk_release(). mlx4: Fixing bad size of event queue buffer mlx4: Fixing use after free bonding:typo in comment sctp: Pass __GFP_NOWARN to hash table allocation attempts. connector: convert to synchronous netlink message processing fib: add rtnl locking in ip_fib_net_exit atm/solos-pci: Don't flap VCs when carrier state changes atm/solos-pci: Don't include frame pseudo-header on transmit hex-dump atm/solos-pci: Use VPI.VCI notation uniformly. Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom netdev: fix mtu check when TSO is enabled net/usb: Ethernet quirks for the LG-VL600 4G modem phylib: phy_attach_direct: phy_init_hw can fail, add cleanup bridge: mcast snooping, fix length check of snooped MLDv1/2 via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent() via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variable net: gre: provide multicast mappings for ipv4 and ipv6 bridge: Fix compilation warning in function br_stp_recalculate_bridge_id() net: Fix warnings caused by MAX_SKB_FRAGS change.
2011-04-01rcu: create new rcu_access_index() and use in mcePaul E. McKenney2-1/+21
The MCE subsystem needs to sample an RCU-protected index outside of any protection for that index. If this was a pointer, we would use rcu_access_pointer(), but there is no corresponding rcu_access_index(). This commit therefore creates an rcu_access_index() and applies it to MCE. Signed-off-by: Paul E. McKenney <[email protected]> Tested-by: Zdenek Kabelac <[email protected]>
2011-04-01HID: add FF support for Logitech G25/G27Simon Wood1-0/+2
Small patch to add support for the G25/G27 by adding USB ID's as suggested by Peter. Boots but otherwise untested as I don't have hardware, .debs for kernel (2.6.38) here if want to test/run Ubuntu/Debian: http://www.mungewell.org/Logitech_Wii_Wheel/ Reported-by: Peter Gundermann <[email protected]> Signed-off-by: Simon Wood <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2011-04-01microblaze: Fix ftraceMichal Simek3-4/+13
- Do not trace idle loop which takes a lot time - Fix cache handling in generic ftrace code - Do not trace lib functions ashldi3, ashrdi3, lshrdi3 Functions are called from generic ftrace code which can't be traced Signed-off-by: Michal Simek <[email protected]>
2011-04-01microblaze: Wire up new syscallsMichal Simek2-1/+9
Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs Signed-off-by: Michal Simek <[email protected]>
2011-04-01microblaze: Fix level/edge irq sensibilityMichal Simek1-2/+2
Patches: "microblaze: Convert to new irq function names" sha (4adc192ec7d977c74c750320f289af9d61c1caca) and "microblaze: Use generic show_interrupts()" sha(9d61c18b25726306c9231428c17db42e3ff29ba7) should also setup edge/level in irq_set_chip_and_handler_name name parameter. Error log: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-Xilinx INTC eth0 3: 2 Xilinx INTC-Xilinx INTC eth0 4: 241 Xilinx INTC-Xilinx INTC timer 6: 108 Xilinx INTC-Xilinx INTC serial Fixed: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-level eth0 3: 2 Xilinx INTC-level eth0 4: 238 Xilinx INTC-edge timer 6: 108 Xilinx INTC-level serial Signed-off-by: Michal Simek <[email protected]> Acked-by: Thomas Gleixner <[email protected]> --- v2: Fix exchanged edge and level
2011-03-31Input: wacom - add support for Lenovo tablet ID (0xE6)Manoj Iyer1-0/+4
Signed-off-by: Manoj Iyer <[email protected]> Acked-by: Ping Cheng <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-04-01kdump: Allow shrinking of kdump region to be overriddenAnton Blanchard2-2/+4
On ppc64 the crashkernel region almost always overlaps an area of firmware. This works fine except when using the sysfs interface to reduce the kdump region. If we free the firmware area we are guaranteed to crash. Rename free_reserved_phys_range to crash_free_reserved_phys_range and make it a weak function so we can override it. Signed-off-by: Anton Blanchard <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Remove no-longer needed preempt workaroundBenjamin Herrenschmidt1-7/+0
The generic code properly re-initializes the preempt count in the idle thread now Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Increase vdso_data->processorCount, not just decrease itBenjamin Herrenschmidt1-0/+4
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Create idle threads on demand and properly reset themBenjamin Herrenschmidt1-22/+78
Instead of creating idle threads at boot for all possible CPUs, we create them on demand, like x86 or ARM, and we properly call init_idle to re-initialize an idle thread when a CPU was unplugged and is now re-plugged. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Don't expose per-cpu "cpu_state" arrayBenjamin Herrenschmidt3-6/+15
Instead, keep it static, expose an accessor and use that from the PowerMac code. Avoids easy namespace collisions and will make it easier to consolidate with other implementations. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Fix CPU hotplug crashes on some machinesBenjamin Herrenschmidt1-16/+55
On some machines that use i2c to synchronize the timebases (such as PowerMac7,2/7,3 G5 machines), hotplug CPU would crash when putting back a new CPU online due to the underlying i2c bus being closed. This uses the newly added bringup_done() callback to move the close along with other housekeeping calls, and adds a CPU notifier to re-open the i2c bus around subsequent hotplug operations Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Add a smp_ops->bringup_up() done callbackBenjamin Herrenschmidt2-0/+5
This allows us to stop abusing smp_ops->setup_cpu() for cleanup tasks that have to take place after the initial boot time CPU bringup. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collisionBenjamin Herrenschmidt1-30/+30
This collides with the cpu_state in our SMP code, use processor_state instead. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Properly NAP offlined CPU on G5Benjamin Herrenschmidt4-28/+15
The current code soft-disables, and then goes to NAP mode which turns interrupts on. That means that if an interrupt occurs, we will hit the masked interrupt code path which isn't what we want, as it will return with EE off, which will either get us out of NAP mode, or fail to enter it (according to spec). Instead, let's just rely on the fact that it is safe to take decrementer interrupts on an offline CPU and leave interrupts enabled. We can also get rid of the special case in asm for power4_cpu_offline_powersave() and just use power4_idle(). Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Remove HMT changes for PowerMac offline codeBenjamin Herrenschmidt1-4/+0
Those instructions do nothing on non-threaded processors such as 970's used on those machines. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one fileBenjamin Herrenschmidt3-60/+55
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bitBenjamin Herrenschmidt1-12/+5
Use the generic code, just add the MPIC priority setting, I don't see any use in mucking around with the decrementer, as 32-bit will have EE off all along, and 64-bit will be able to deal with it. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32Benjamin Herrenschmidt3-3/+4
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/pmac/smp: Fix 32-bit PowerMac cpu_dieBenjamin Herrenschmidt2-20/+6
Use generic cpu_state, call idle_task_exit() properly, and remove smp_core99_cpu_die() which isn't useful, the generic function does the job just fine.
2011-04-01powerpc/smp: Remove unused smp_ops->cpu_enable()Benjamin Herrenschmidt3-13/+0
Remove the last remnants of cpu_enable(), everybody uses the normal __cpu_up() path now Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Remove unused generic_cpu_enable()Benjamin Herrenschmidt2-23/+0
Nobody uses it, besides we should always use the normal __cpu_up path anyways Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: Fix generic_mach_cpu_die()Benjamin Herrenschmidt1-2/+1
This is used by some "soft" hotplug implementations. I needs to call idle_task_exit() when the CPU is going away, and we remove the now no-longer needed set_cpu_online() and local_irq_enable() which are handled by the return to start_secondary Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc/smp: soft-replugged CPUs must go back to start_secondaryBenjamin Herrenschmidt4-4/+17
Various thing are torn down when a CPU is hot-unplugged. That CPU is expected to go back to start_secondary when re-plugged to re initialize everything, such as clock sources, maps, ... Some implementations just return from cpu_die() callback in the idle loop when the CPU is "re-plugged". This is not enough. We fix it using a little asm trampoline which resets the stack and calls back into start_secondary as if we were all fresh from boot. The trampoline already existed on ppc64, but we add it for ppc32 Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-04-01powerpc: Make decrementer interrupt robust against offlined CPUsBenjamin Herrenschmidt1-4/+11
With some implementations, it is possible that a timer interrupt occurs every few seconds on an offline CPU. In this case, just re-arm the decrementer and return immediately Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2011-03-31appletalk: Fix OOPS in atalk_release().David S. Miller1-5/+6
Commit 60d9f461a20ba59219fdcdc30cbf8e3a4ad3f625 ("appletalk: remove the BKL") added a dereference of "sk" before checking for NULL in atalk_release(). Guard the code block completely, rather than partially, with the NULL check. Reported-by: Dave Jones <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-01Merge remote branch 'keithp/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie3-13/+24
* 'keithp/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Reset GMBUS controller after NAK drm/i915: Busy-spin wait_for condition in atomic contexts drm/i915/lvds: Always return connected in the absence of better information
2011-04-01drm: export drm_find_cea_extension to driversBen Skeggs2-1/+3
Nouveau needs access to this structure to build an ELD block for use by the HDA audio codec. Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-04-01drm/radeon/kms: add some sanity checks to obj info record parsingi (v2)John Lindgren1-6/+7
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35502 agd5f: also add sanity check to connector records. v2: fix one more case. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-03-31[media] radio: wl128x: Update registration process with STManjunatha Halli1-3/+13
As underlying ST driver registration API's have changed with latest 2.6.38-rc8 kernel this patch will update the FM driver accordingly. Signed-off-by: Manjunatha Halli <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-31[media] staging: altera-jtag needs delay.hRandy Dunlap1-0/+1
altera-jtag.c needs to include <linux/delay.h> to fix a build error: drivers/staging/altera-stapl/altera-jtag.c:398: error: implicit declaration of function 'udelay' Signed-off-by: Randy Dunlap <[email protected]> Cc: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-31ALSA: HDA: Add dock mic quirk for Lenovo Thinkpad X220David Henningsson1-0/+1
This quirk is needed for the docking station mic of Lenovo Thinkpad X220 to function correctly. BugLink: http://bugs.launchpad.net/bugs/746259 Cc: [email protected] Tested-by: James Ferguson <[email protected]> Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-03-31x86, UV: Fix kdump rebootCliff Wickman1-0/+9
After a crash dump on an SGI Altix UV system the crash kernel fails to cause a reboot. EFI mode is disabled in the kdump kernel, so only the reboot_type of BOOT_ACPI works. Signed-off-by: Cliff Wickman <[email protected]> Cc: [email protected] LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31Fix common misspellingsLucas De Marchi2463-4252/+4252
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <[email protected]>
2011-03-31perf: Fix task_struct reference leakPeter Zijlstra1-0/+5
sys_perf_event_open() had an imbalance in the number of task refs it took causing memory leakage Cc: Jiri Olsa <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: [email protected] # .37+ Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31perf: Fix task context schedulingPeter Zijlstra1-1/+1
Jiri reported: | | - once an event is created by sys_perf_event_open, task context | is created and it stays even if the event is closed, until the | task is finished ... thats what I see in code and I assume it's | correct | | - when the task opens event, perf_sched_events jump label is | incremented and following callbacks are started from scheduler | | __perf_event_task_sched_in | __perf_event_task_sched_out | | These callback *in/out set/unset cpuctx->task_ctx value to the | task context. | | - close is called on event on CPU 0: | - the task is scheduled on CPU 0 | - __perf_event_task_sched_in is called | - cpuctx->task_ctx is set | - perf_sched_events jump label is decremented and == 0 | - __perf_event_task_sched_out is not called | - cpuctx->task_ctx on CPU 0 stays set | | - exit is called on CPU 1: | - the task is scheduled on CPU 1 | - perf_event_exit_task is called | - task_ctx_sched_out unsets cpuctx->task_ctx on CPU 1 | - put_ctx destroys the context | | - another call of perf_rotate_context on CPU 0 will use invalid | task_ctx pointer, and eventualy panic. | Cure this the simplest possibly way by partially reverting the jump_label optimization for the sched_out case. Reported-and-tested-by: Jiri Olsa <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: <[email protected]> # .37+ LKML-Reference: <1301520405.4859.213.camel@twins> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31perf: mmap 512 kiB by defaultFrederic Weisbecker1-1/+5
The default setting of perf record is to mmap 128 pages if the user did not override with -m. However the page size may vary accross different architecture settings, giving different default size between each. Moreover the kernel side still has a default max number of mlocked pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages with page size > 4096 overlaps this threshold. Thus, better adapt to this limitation and set the default number of pages to fit those 512 kiB + 1 page. Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Stephane Eranian <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31perf: Rebase max unprivileged mlock threshold on top of page sizeFrederic Weisbecker1-2/+2
Ensure we allow 512 kiB + 1 page for user control without assuming a 4096 bytes page size. Reported-by: Peter Zijlstra <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31sched: Fix rebalance interval calculationSisir Koppaka1-2/+3
The interval for checking scheduling domains if they are due to be balanced currently depends on boot state NR_CPUS, which may not accurately reflect the number of online CPUs at the time of check. Thus replace NR_CPUS with num_online_cpus(). (ed: Should only affect those who set NR_CPUS really high, such as 4096 or so :-) Signed-off-by: Sisir Koppaka <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31sched, doc: Beef up load balancing descriptionBorislav Petkov1-9/+23
Correct all function names pertaining to load balancing and explain shortly how load balancing is performed. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31sched: Leave sched_setscheduler() earlier if possible, do not disturb ↵Dario Faggioli1-0/+11
SCHED_FIFO tasks sched_setscheduler() (in sched.c) is called in order of changing the scheduling policy and/or the real-time priority of a task. Thus, if we find out that neither of those are actually being modified, it is possible to return earlier and save the overhead of a full deactivate+activate cycle of the task in question. Beside that, if we have more than one SCHED_FIFO task with the same priority on the same rq (which means they share the same priority queue) having one of them changing its position in the priority queue because of a sched_setscheduler (as it happens by means of the deactivate+activate) that does not actually change the priority violates POSIX which states, for SCHED_FIFO: "If a thread whose policy or priority has been modified by pthread_setschedprio() is a running thread or is runnable, the effect on its position in the thread list depends on the direction of the modification, as follows: a. <...> b. If the priority is unchanged, the thread does not change position in the thread list. c. <...>" http://pubs.opengroup.org/onlinepubs/009695399/functions/xsh_chap02_08.html (ed: And the POSIX specification here does, briefly and somewhat unexpectedly, match what common sense tells us as well. ) Signed-off-by: Dario Faggioli <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <1300971618.3960.82.camel@Palantir> Signed-off-by: Ingo Molnar <[email protected]>
2011-03-31mlx4: Fixing bad size of event queue bufferYevgeny Petrilin1-1/+3
We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-31mlx4: Fixing use after freeYevgeny Petrilin1-1/+2
In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-31bonding:typo in commentPeter Pan(潘卫平)1-1/+1
use accumulates instead of acumulates. Signed-off-by: Pan Weiping <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-31drm/i915: Reset GMBUS controller after NAKChris Wilson1-4/+21
Once a NAK has been asserted by the slave, we need to reset the GMBUS controller in order to continue. This is done by asserting the Software Clear Interrupt bit and then clearing it again to restore operations. If we don't clear the NAK, then all future GMBUS xfers will fail, including DDC probes and EDID retrieval. v2: Add some comments as suggested by Keith Packard. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35781 Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Keith Packard <[email protected]> Tested-by: Jesse Barnes <[email protected]> Tested-by: "Mengmeng Meng" <[email protected]>
2011-03-31drm/i915: Busy-spin wait_for condition in atomic contextsChris Wilson1-1/+1
During modesetting, we need to wait for the hardware to report readiness by polling the registers. Normally, we call msleep() between reads, because some state changes may take a whole vblank or more to complete. However during a panic, we are in an atomic context and cannot sleep. Instead, busy spin polling the termination condition. References: https://bugzilla.kernel.org/show_bug.cgi?id=31772 Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Keith Packard <[email protected]> Reviewed-by: Jesse Barnes <[email protected]>
2011-03-31sparc32: Pass task_struct to schedule_tail() in ret_from_forkTkhai Kirill1-1/+1
We have to pass task_struct of previous process to function schedule_tail(). Currently in ret_from_fork previous thread_info is passed: switch_to: mov %g6, %g3 /* previous thread_info in g6 */ ret_from_fork: call schedule_tail mov %g3, %o0 /* previous thread_info is passed */ void schedule_tail(struct task_struct *prev); Signed-off-by: Tkhai Kirill <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.