| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for
asrock p67 host"), EJ188 have the same issue as EJ168, where completely
dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well.
Cc: [email protected]
Signed-off-by: Kuangyi Chiang <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The transferred length is set incorrectly for cancelled bulk
transfer TDs in case the bulk transfer ring stops on the last transfer
block with a 'Stop - Length Invalid' completion code.
length essentially ends up being set to the requested length:
urb->actual_length = urb->transfer_buffer_length
Length for 'Stop - Length Invalid' cases should be the sum of all
TRB transfer block lengths up to the one the ring stopped on,
_excluding_ the one stopped on.
Fix this by always summing up TRB lengths for 'Stop - Length Invalid'
bulk cases.
This issue was discovered by Alan Stern while debugging
https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not
solve that bug. Issue is older than 4.10 kernel but fix won't apply
to those due to major reworks in that area.
Tested-by: Pierre Tomon <[email protected]>
Cc: [email protected] # v4.10+
Cc: Alan Stern <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix an issue where get_write is not used in smb2_set_ea().
Fixes: 6fc0a265e1b9 ("ksmbd: fix potential circular locking issue in smb2_set_ea()")
Cc: [email protected]
Reported-by: Wang Zhaolong <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
If the directory name in the root of the share starts with
character like 镜(0x955c) or Ṝ(0x1e5c), it (and anything inside)
cannot be accessed. The leading slash check must be checked after
converting unicode to nls string.
Cc: [email protected]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
parameters
The current cbs parameter depends on speed after uplinking,
which is not needed and will report a configuration error
if the port is not initially connected. The UAPI exposed by
tc-cbs requires userspace to recalculate the send slope anyway,
because the formula depends on port_transmit_rate (see man tc-cbs),
which is not an invariant from tc's perspective. Therefore, we
use offload->sendslope and offload->idleslope to derive the
original port_transmit_rate from the CBS formula.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Signed-off-by: Xiaolei Wang <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
TSO currently fails when the skb's gso_type field has more than one bit
set.
TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.
The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.
This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Joshua Washington <[email protected]>
Reviewed-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Harshitha Ramamurthy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Acked-by: Andrei Vagin <[email protected]>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.
v3 - Add back unrelated empty line removal.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: fix not using correct handle
- L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- L2CAP: fix connection setup in l2cap_connect
* tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix connection setup in l2cap_connect
Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
Bluetooth: hci_sync: Fix not using correct handle
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by
checkpatch script.
Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment")
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <[email protected]>
Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked,
ufshcd_pending_cmds() is called to check whether there are pending
transactions or not. And only if there are no pending transactions can we
proceed to kickstart the clock scaling sequence.
ufshcd_pending_cmds() traverses over all SCSI devices and calls
sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down
to three steps:
1. Calculate the nr outstanding bits set in the 'word' bitmap.
2. Calculate the nr outstanding bits set in the 'cleared' bitmap.
3. Subtract the result from step 1 by the result from step 2.
This can lead to a race condition as outlined below:
Assume there is one pending transaction in the request queue of one SCSI
device, say sda, and the budget token of this request is 0, the 'word' is
0x1 and the 'cleared' is 0x0.
1. When step 1 executes, it gets the result as 1.
2. Before step 2 executes, block layer tries to dispatch a new request to
sda. Since the SCSI layer is blocked, the request cannot pass through
SCSI but the block layer would do budget_get() and budget_put() to
sda's budget map regardless, so the 'word' has become 0x3 and 'cleared'
has become 0x2 (assume the new request got budget token 1).
3. When step 2 executes, it gets the result as 1.
4. When step 3 executes, it gets the result as 0, meaning there is no
pending transactions, which is wrong.
Thread A Thread B
ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests()
| |
sbitmap_weight(word) |
| scsi_mq_get_budget()
| |
| scsi_mq_put_budget()
| |
sbitmap_weight(cleared)
...
When this race condition happens, the clock scaling sequence is started
with transactions still in flight, leading to subsequent hibernate enter
failure, broken link, task abort and back to back error recovery.
Fix this race condition by quiescing the request queues before calling
ufshcd_pending_cmds() so that block layer won't touch the budget map when
ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer
blocking/unblocking to reduce redundancies and latencies.
Fixes: 8d077ede48c1 ("scsi: ufs: Optimize the command queueing code")
Co-developed-by: Can Guo <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Ziqi Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <[email protected]>
Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Igor Pylypiv <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
PA-RISC systems with PA8800 and PA8900 processors have had problems
with random segmentation faults for many years. Systems with earlier
processors are much more stable.
Systems with PA8800 and PA8900 processors have a large L2 cache which
needs per page flushing for decent performance when a large range is
flushed. The combined cache in these systems is also more sensitive to
non-equivalent aliases than the caches in earlier systems.
The majority of random segmentation faults that I have looked at
appear to be memory corruption in memory allocated using mmap and
malloc.
My first attempt at fixing the random faults didn't work. On
reviewing the cache code, I realized that there were two issues
which the existing code didn't handle correctly. Both relate
to cache move-in. Another issue is that the present bit in PTEs
is racy.
1) PA-RISC caches have a mind of their own and they can speculatively
load data and instructions for a page as long as there is a entry in
the TLB for the page which allows move-in. TLBs are local to each
CPU. Thus, the TLB entry for a page must be purged before flushing
the page. This is particularly important on SMP systems.
In some of the flush routines, the flush routine would be called
and then the TLB entry would be purged. This was because the flush
routine needed the TLB entry to do the flush.
2) My initial approach to trying the fix the random faults was to
try and use flush_cache_page_if_present for all flush operations.
This actually made things worse and led to a couple of hardware
lockups. It finally dawned on me that some lines weren't being
flushed because the pte check code was racy. This resulted in
random inequivalent mappings to physical pages.
The __flush_cache_page tmpalias flush sets up its own TLB entry
and it doesn't need the existing TLB entry. As long as we can find
the pte pointer for the vm page, we can get the pfn and physical
address of the page. We can also purge the TLB entry for the page
before doing the flush. Further, __flush_cache_page uses a special
TLB entry that inhibits cache move-in.
When switching page mappings, we need to ensure that lines are
removed from the cache. It is not sufficient to just flush the
lines to memory as they may come back.
This made it clear that we needed to implement all the required
flush operations using tmpalias routines. This includes flushes
for user and kernel pages.
After modifying the code to use tmpalias flushes, it became clear
that the random segmentation faults were not fully resolved. The
frequency of faults was worse on systems with a 64 MB L2 (PA8900)
and systems with more CPUs (rp4440).
The warning that I added to flush_cache_page_if_present to detect
pages that couldn't be flushed triggered frequently on some systems.
Helge and I looked at the pages that couldn't be flushed and found
that the PTE was either cleared or for a swap page. Ignoring pages
that were swapped out seemed okay but pages with cleared PTEs seemed
problematic.
I looked at routines related to pte_clear and noticed ptep_clear_flush.
The default implementation just flushes the TLB entry. However, it was
obvious that on parisc we need to flush the cache page as well. If
we don't flush the cache page, stale lines will be left in the cache
and cause random corruption. Once a PTE is cleared, there is no way
to find the physical address associated with the PTE and flush the
associated page at a later time.
I implemented an updated change with a parisc specific version of
ptep_clear_flush. It fixed the random data corruption on Helge's rp4440
and rp3440, as well as on my c8000.
At this point, I realized that I could restore the code where we only
flush in flush_cache_page_if_present if the page has been accessed.
However, for this, we also need to flush the cache when the accessed
bit is cleared in ptep_clear_flush_young to keep things synchronized.
The default implementation only flushes the TLB entry.
Other changes in this version are:
1) Implement parisc specific version of ptep_get. It's identical to
default but needed in arch/parisc/include/asm/pgtable.h.
2) Revise parisc implementation of ptep_test_and_clear_young to use
ptep_get (READ_ONCE).
3) Drop parisc implementation of ptep_get_and_clear. We can use default.
4) Revise flush_kernel_vmap_range and invalidate_kernel_vmap_range to
use full data cache flush.
5) Move flush_cache_vmap and flush_cache_vunmap to cache.c. Handle
VM_IOREMAP case in flush_cache_vmap.
At this time, I don't know whether it is better to always flush when
the PTE present bit is set or when both the accessed and present bits
are set. The later saves flushing pages that haven't been accessed,
but we need to flush in ptep_clear_flush_young. It also needs a page
table lookup to find the PTE pointer. The lpa instruction only needs
a page table lookup when the PTE entry isn't in the TLB.
We don't atomically handle setting and clearing the _PAGE_ACCESSED bit.
If we miss an update, we may miss a flush and the cache may get corrupted.
Whether the current code is effectively atomic depends on process control.
When CONFIG_FLUSH_PAGE_ACCESSED is set to zero, the page will eventually
be flushed when the PTE is cleared or in flush_cache_page_if_present. The
_PAGE_ACCESSED bit is not used, so the problem is avoided.
The flush method can be selected using the CONFIG_FLUSH_PAGE_ACCESSED
define in cache.c. The default is 0. I didn't see a large difference
in performance.
Signed-off-by: John David Anglin <[email protected]>
Cc: <[email protected]> # v6.6+
Signed-off-by: Helge Deller <[email protected]>
|
|
The kprobes and synth event generation test modules add events and lock
(get a reference) those event file reference in module init function,
and unlock and delete it in module exit function. This is because those
are designed for playing as modules.
If we make those modules as built-in, those events are left locked in the
kernel, and never be removed. This causes kprobe event self-test failure
as below.
[ 97.349708] ------------[ cut here ]------------
[ 97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.357106] Modules linked in:
[ 97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g699646734ab5-dirty #14
[ 97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90
[ 97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286
[ 97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000
[ 97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68
[ 97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000
[ 97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000
[ 97.381536] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[ 97.383813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0
[ 97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 97.391196] Call Trace:
[ 97.391967] <TASK>
[ 97.392647] ? __warn+0xcc/0x180
[ 97.393640] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.395181] ? report_bug+0xbd/0x150
[ 97.396234] ? handle_bug+0x3e/0x60
[ 97.397311] ? exc_invalid_op+0x1a/0x50
[ 97.398434] ? asm_exc_invalid_op+0x1a/0x20
[ 97.399652] ? trace_kprobe_is_busy+0x20/0x20
[ 97.400904] ? tracing_reset_all_online_cpus+0x15/0x90
[ 97.402304] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.403773] ? init_kprobe_trace+0x50/0x50
[ 97.404972] do_one_initcall+0x112/0x240
[ 97.406113] do_initcall_level+0x95/0xb0
[ 97.407286] ? kernel_init+0x1a/0x1a0
[ 97.408401] do_initcalls+0x3f/0x70
[ 97.409452] kernel_init_freeable+0x16f/0x1e0
[ 97.410662] ? rest_init+0x1f0/0x1f0
[ 97.411738] kernel_init+0x1a/0x1a0
[ 97.412788] ret_from_fork+0x39/0x50
[ 97.413817] ? rest_init+0x1f0/0x1f0
[ 97.414844] ret_from_fork_asm+0x11/0x20
[ 97.416285] </TASK>
[ 97.417134] irq event stamp: 13437323
[ 97.418376] hardirqs last enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150
[ 97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150
[ 97.423838] softirqs last enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0
[ 97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0
[ 97.428850] ---[ end trace 0000000000000000 ]---
And also, since we can not cleanup dynamic_event file, ftracetest are
failed too.
To avoid these issues, build these tests only as modules.
Link: https://lore.kernel.org/all/171811263754.85078.5877446624311852525.stgit@devnote2/
Fixes: 9fe41efaca08 ("tracing: Add synth event generation test module")
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
|
|
When reworking the range checking for get_user(), the get_user_8() case
on 32-bit wasn't zeroing the high register. (The jump to bad_get_user_8
was accidentally dropped.) Restore the correct error handling
destination (and rename the jump to using the expected ".L" prefix).
While here, switch to using a named argument ("size") for the call
template ("%c4" to "%c[size]") as already used in the other call
templates in this file.
Found after moving the usercopy selftests to KUnit:
# usercopy_test_invalid: EXPECTATION FAILED at
lib/usercopy_kunit.c:278
Expected val_u64 == 0, but
val_u64 == -60129542144 (0xfffffff200000000)
Closes: https://lore.kernel.org/all/CABVgOSn=tb=Lj9SxHuT4_9MTjjKVxsq-ikdXC4kGHO4CfKVmGQ@mail.gmail.com
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Reported-by: David Gow <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Qiuxu Zhuo <[email protected]>
Tested-by: David Gow <[email protected]>
Link: https://lore.kernel.org/all/20240610210213.work.143-kees%40kernel.org
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
When compiling for the `rusttest` target, the `core::ptr` import is
unused since its only use happens in the `reserve()` method which is
not compiled in that target:
warning: unused import: `core::ptr`
--> rust/kernel/alloc/vec_ext.rs:7:5
|
7 | use core::ptr;
| ^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
Thus clean it.
Fixes: 97ab3e8eec0c ("rust: alloc: fix dangling pointer in VecExt<T>::reserve()")
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
'init_exec' is unused since
commit cb75d97e9c77 ("drm/nouveau: implement devinit subdev, and new
init table parser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some of AMD ZEN4 APU/CPU have support for adjusting the CPU core
clock more quickly and presicely according to CPU work loading.
This is advertised by the Fast CPPC x86 feature.
This change will only be effective in the *passive mode* of
AMD pstate driver. From the test results of different
transition delay values, 600us is chosen to make a balance
between performance and power consumption.
Some test results on AMD Ryzen 7840HS(Phoenix) APU:
1. Tbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Tbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 2010 2804 8768 17171 16170 15132 15027
Throughput/(MB/s) 114 259 1041 3010 3135 4851 4605
PPW 0.0567 0.0923 0.1187 0.1752 0.1938 0.3205 0.3064
600us Clients 1 2 4 8 12 16 32
Energy/Joules 2115 (5.22%) 2388 (-14.84%) 10700(22.03%) 16716 (-2.65%) 15939 (-1.43%) 15053 (-0.52%) 15083 (0.37% )
Throughput/(MB/s) 122 (7.02%) 234 (-9.65% ) 1188 (14.12%) 3003 (-0.23%) 3143 (0.26% ) 4842 (-0.19%) 4603 (-0.04%)
PPW 0.0576(1.59%) 0.0979(6.07% ) 0.111(-6.49%) 0.1796(2.51% ) 0.1971(1.70% ) 0.3216(0.34% ) 0.3051(-0.42%)
============= =================== ============== ================ ============= =============== ============== =============== ===============
2.Dbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Dbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 4890 3779 3567 5157 5611 6500 8163
Throughput/(MB/s) 327 167 220 577 775 938 1397
PPW 0.0668 0.0441 0.0616 0.1118 0.1381 0.1443 0.1711
600us Clients 1 2 4 8 12 16 32
Energy/Joules 4915 (0.51%) 4912 (29.98%) 3506 (-1.71%) 4907 (-4.85% ) 5011 (-10.69%) 5672 (-12.74%) 8141 (-0.27%)
Throughput/(MB/s) 348 (6.42%) 284 (70.06%) 220 (0.00% ) 518 (-10.23%) 712 (-8.13% ) 854 (-8.96% ) 1475 (5.58% )
PPW 0.0708(5.99%) 0.0578(31.07%) 0.0627(1.79% ) 0.1055(-5.64% ) 0.142(2.82% ) 0.1505(4.30% ) 0.1811(5.84% )
============= =================== ============== =============== ============== =============== ============== =============== ===============
3.Hackbench(less time is better)
============= =========================== ==========================
hackbench governor:schedutil
============= =========================== ==========================
Trans Delay Process Mode Ave time(s) Thread Mode Ave time(s)
1000us 14.484 14.484
600us 14.418(-0.46%) 15.41(+6.39%)
============= =========================== ==========================
4.Perf_sched_bench(less time is better)
============= =================== ============== ============== ============== =============== =============== =============
Trans Delay perf_sched_bench governor:schedutil
============= =================== ============== ============== ============== =============== =============== =============
1000us Groups 1 2 4 8 12 24
AveTime(s) 1.64 2.851 5.878 11.636 16.093 26.395
600us Groups 1 2 4 8 12 24
AveTime(s) 1.69(3.05%) 2.845(-0.21%) 5.843(-0.60%) 11.576(-0.52%) 16.092(-0.01%) 26.32(-0.28%)
============= ================== ============== ============== ============== =============== =============== ==============
5.Sysbench(higher is better)
============= ================== ============== ================= ============== ================ =============== =================
Sysbench governor:schedutil
============= ================== ============== ================= ============== ================ =============== =================
1000us Thread 1 2 4 8 12 24
Ave events 6020.98 12273.39 24119.82 46171.57 47074.37 47831.72
600us Thread 1 2 4 8 12 24
Ave events 6154.82(2.22%) 12271.63(-0.01%) 24392.5(1.13%) 46117.64(-0.12%) 46852.19(-0.47%) 47678.92(-0.32%)
============= ================== ============== ================= ============== ================ =============== =================
In conclusion, a shorter transition delay
of cpu clock will make a quite positive effect to improve PPW
on Dbench test, in the meanwhile, keep stable performance
on Tbench, Hackbench, Perf_sched_bench and Sysbench.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Perry Yuan <[email protected]>
Acked-by: Mario Limonciello <[email protected]>
|
|
Some AMD Zen 4 processors support a new feature FAST CPPC which
allows for a faster CPPC loop due to internal architectural
enhancements. The goal of this faster loop is higher performance
at the same power consumption.
Reference:
See the page 99 of PPR for AMD Family 19h Model 61h rev.B1, docID 56713
Signed-off-by: Perry Yuan <[email protected]>
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Borislav Petkov (AMD) <[email protected]>
|
|
gcc requires -static-libasan in order to ensure that Address Sanitizer's
library is the first one loaded. However, this leads to build failures
on clang, when building via:
make LLVM=1 -C tools/testing/selftests
However, clang already does the right thing by default: it statically
links the Address Sanitizer if -fsanitize is specified. Therefore,
simply omit -static-libasan for clang builds. And leave behind a
comment, because the whole reason for static linking might not be
obvious.
Cc: Ryan Roberts <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When building with clang via:
make LLVM=1 -C tools/testing/selftests
two distinct failures occur:
1) gcc requires -static-libasan in order to ensure that Address
Sanitizer's library is the first one loaded. However, this leads to
build failures on clang, when building via:
make LLVM=1 -C tools/testing/selftests
However, clang already does the right thing by default: it statically
links the Address Sanitizer if -fsanitize is specified. Therefore, fix
this by simply omitting -static-libasan for clang builds. And leave
behind a comment, because the whole reason for static linking might not
be obvious.
2) clang won't accept invocations of this form, but gcc will:
$(CC) file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
Reviewed-by: Ryan Roberts <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
|
|
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f118 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/[email protected]
Reported-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
According to the FF-A spec (Buffer states and ownership), after a
producer has written into a buffer, it is "full" and now owned by the
consumer. The producer won't be able to use that buffer, until the
consumer hands it over with an invocation such as RX_RELEASE.
It is clear in the following paragraph (Transfer of buffer ownership),
that MEM_RETRIEVE_RESP is transferring the ownership from producer (in
our case SPM) to consumer (hypervisor). RX_RELEASE is therefore
mandatory here.
It is less clear though what is happening with MEM_FRAG_TX. But this
invocation, as a response to MEM_FRAG_RX writes into the same hypervisor
RX buffer (see paragraph "Transmission of transaction descriptor in
fragments"). Also this is matching the TF-A implementation where the RX
buffer is marked "full" during a MEM_FRAG_RX.
Release the RX hypervisor buffer in those two cases. This will unblock
later invocations using this buffer which would otherwise fail.
(RETRIEVE_REQ, MEM_FRAG_RX and PARTITION_INFO_GET).
Signed-off-by: Vincent Donnefort <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|
|
Fix missing kmem_cache_destroy() for ioat_sed_cache in
ioat_exit_module().
Noticed via:
```
modprobe ioatdma
rmmod ioatdma
modprobe ioatdma
debugfs: Directory 'ioat_sed_ent' with parent 'slab' already present!
```
Fixes: c0f28ce66ecf ("dmaengine: ioatdma: move all the init routines")
Signed-off-by: Nikita Shubin <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
dma-channels is a number, not a list. Apply proper constraints on the
actual number.
Fixes: 6eb439dff645 ("dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string")
Cc: [email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/[email protected]/
Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
If probing fails we end up with leaking ioatdma_device and each
allocated channel.
Following kmemleak easy to reproduce by injecting an error in
ioat_alloc_chan_resources() when doing ioat_dma_self_test().
unreferenced object 0xffff888014ad5800 (size 1024): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa000b7d1>] ioat_pci_probe+0xc1/0x1c0 [ioatdma]
[..]
repeated for each ioatdma channel:
unreferenced object 0xffff8880148e5c00 (size 512): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa0009641>] ioat_enumerate_channels+0x101/0x2d0 [ioatdma]
[<ffffffffa000b266>] ioat3_dma_probe+0x4d6/0x970 [ioatdma]
[<ffffffffa000b891>] ioat_pci_probe+0x181/0x1c0 [ioatdma]
[..]
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Make sure we are disabling interrupts and destroying DMA pool if
pcie_capability_read/write_word() call failed.
Fixes: 511deae0261c ("dmaengine: ioatdma: disable relaxed ordering for ioatdma")
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Fix leaking ioatdma_device if I/OAT version is less than IOAT_VER_3_0.
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it.
Fixes: 81a1f90f20af ("dmaengine: ti: k3-udma-glue: Add function to parse channel by ID")
Signed-off-by: Siddharth Vadapalli <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Acked-by: Peter [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
'ip6 dscp set $v' in an nftables outpute route chain has no effect.
While nftables does detect the dscp change and calls the reroute hook.
But ip6_route_me_harder never sets the dscp/flowlabel:
flowlabel/dsfield routing rules are ignored and no reroute takes place.
Thanks to Yi Chen for an excellent reproducer script that I used
to validate this change.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yi Chen <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd80e (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <[email protected]>
Tested-by: Lion Ackermann <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6bd ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e11228b ("dmaengine: idxd: Fix list corruption in description completion")
Signed-off-by: Li RongQing <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
fix the following errors by using string format specifier and an empty
parameter:
seccomp_benchmark.c:197:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
197 | ksft_print_msg("");
| ^~
seccomp_benchmark.c:202:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
202 | ksft_print_msg("");
| ^~
seccomp_benchmark.c:204:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
204 | ksft_print_msg("");
| ^~
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Suggested-by: Kees Cook <[email protected]>
Signed-off-by: Amer Al Shanawany <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix the following warnings by adding return check and error messages.
statmount_test.c: In function ‘cleanup_namespace’:
statmount_test.c:128:9: warning: ignoring return value of ‘fchdir’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
128 | fchdir(orig_root);
| ^~~~~~~~~~~~~~~~~
statmount_test.c:129:9: warning: ignoring return value of ‘chroot’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
129 | chroot(".");
| ^~~~~~~~~~~
Signed-off-by: Amer Al Shanawany <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Since physical and virtual kernel address spaces are uncoupled
the kernel image is not mapped using large segment pages anymore,
which is a regression.
Put the kernel image at the same large segment page offset in
physical memory as in virtual memory. Such approach preserves
the existing number of bits of entropy used for randomization
of the kernel location in virtual memory when KASLR is on.
As result, the kernel is mapped using large segment pages.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Heiko Carstens <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Do not allow creation of large pages against physical addresses,
which itself are not aligned on the correct boundary. Failure to
do so might lead to referencing wrong memory as result of the way
DAT works.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Signed-off-by: Heiko Carstens <[email protected]>
Acked-by: Vasily Gorbik <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not.
Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1")
Signed-off-by: Christian Marangi <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Commit 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API") not
only switched to the gpiod API, but also inverted / changed the polarity
of the GPIO.
According to the PCI specification, the RST# pin is an active-low
signal. However, most of the device trees that have been widely used for
a long time (mainly in the openWrt project) define this GPIO as
active-high and the old driver code inverted the signal internally.
Apparently there are actually boards where the reset gpio must be
operated inverted. For this reason, we cannot use the GPIOD_OUT_LOW/HIGH
flag for initialization. Instead, we must explicitly set the gpio to
value 1 in order to take into account any "GPIO_ACTIVE_LOW" flag that
may have been set.
In order to remain compatible with all these existing device trees, we
should therefore keep the logic as it was before the commit.
Fixes: 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API")
Cc: [email protected]
Signed-off-by: Martin Schiller <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
read_config_dword() contains strange condition checking ret for a
number of values. The ret variable, however, is always zero because
config_access() never returns anything else. Thus, the retry is always
taken until number of tries is exceeded.
The code looks like it wants to check *val instead of ret to see if the
read gave an error response.
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set.
Fixes: ae1aadb1eb8d ("nouveau: don't fail driver load if no display hw present.")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337
Signed-off-by: Vasily Khoruzhick <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Due to timer wheel implementation, a timer will usually fire
after its schedule.
For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.
For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.
We need to make sure tcp_rtx_probe0_timed_out() handles this case.
Fixes: e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Menglong Dong <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Reviewed-by: Jason Xing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Matthieu Baerts says:
====================
mptcp: various fixes
The different patches here are some unrelated fixes for MPTCP:
- Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP
fallback to TCP followed by retransmissions before the processing of
any other incoming packets. A fix for v5.9+.
- Patch 2 makes sure the RmAddr MIB counter is incremented, and only
once per ID, upon the reception of a RM_ADDR. A fix for v5.10+.
- Patch 3 doesn't update 'add addr' related counters if the connect()
was not possible. A fix for v5.7+.
- Patch 4 updates the mailmap file to add Geliang's new email address.
====================
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-0-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Just like my other email addresses, map my new one to kernel.org
account too.
My new email address uses "last name, first name" format, which is
different from my other email addresses. This mailmap is also used
to indicate that it is actually the same person.
Suggested-by: Mat Martineau <[email protected]>
Suggested-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-4-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: [email protected]
Co-developed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: YonglongLi <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs")
Cc: [email protected]
Co-developed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: YonglongLi <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <[email protected]>
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Cc: [email protected]
Reported-by: Christoph Paasch <[email protected]>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|