aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-14thermal: core: Synchronize suspend-prepare and post-suspend actionsRafael J. Wysocki2-0/+25
After commit 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") it is theoretically possible that, if a system suspend starts immediately after a system resume, thermal_zone_device_resume() spawned by the thermal PM notifier for one of the thermal zones at the end of the system resume will run after the PM thermal notifier for the suspend-prepare action. If that happens, tz->suspended set by the latter will be reset by the former which may lead to unexpected consequences. To avoid that race, synchronize thermal_zone_device_resume() with the suspend-prepare thermal PM notifier with the help of additional bool field and completion in struct thermal_zone_device. Note that this also ensures running __thermal_zone_device_update() at least once for each thermal zone between system resume and the following system suspend in case it is needed to start thermal mitigation. Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-06-14bpf: Avoid splat in pskb_pull_reasonFlorian Westphal1-0/+5
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug hint in pskb_may_pull. We'd like to retain this debug check because it might hint at integer overflows and other issues (kernel code should pull headers, not huge value). In bpf case, this splat isn't interesting at all: such (nonsensical) bpf programs are typically generated by a fuzzer anyway. Do what Eric suggested and suppress such warning. For CONFIG_DEBUG_NET=n we don't need the extra check because pskb_may_pull will do the right thing: return an error without the WARN() backtrace. Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers") Reported-by: [email protected] Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Closes: https://syzkaller.appspot.com/bug?extid=0c4150bff9fff3bf023c Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://lore.kernel.org/bpf/[email protected]
2024-06-14Merge tag 'wireless-2024-06-14' of ↵Jakub Kicinski8-26/+50
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Various fixes: * cfg80211: wext scan * mac80211: monitor regression, scan counted_by, offload * iwlwifi: locking, 6 GHz scan, remain-on-channel * tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix monitor channel with chanctx emulation wifi: mac80211: Avoid address calculations via out of bounds array indexing wifi: mac80211: Recalc offload when monitor stop wifi: iwlwifi: scan: correctly check if PSC listen period is needed wifi: iwlwifi: mvm: fix ROC version check wifi: iwlwifi: mvm: unlock mvm mutex wifi: cfg80211: wext: add extra SIOCSIWSCAN data check wifi: cfg80211: wext: set ssids=NULL for passive scans ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-14Merge tag 'amd-pstate-v6.11-2024-06-11' of ↵Rafael J. Wysocki3-2/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Merge amd-pstate driver updates for v6.11 from Mario Mario Limonciello: "Add support for "Fast CPPC" which allows some CPUs to operate a tighter loop for passive mode." * tag 'amd-pstate-v6.11-2024-06-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq: amd-pstate: change cpu freq transition delay for some models x86/cpufeatures: Add AMD FAST CPPC feature flag
2024-06-14Merge back new cpufreq material for v6.11.Rafael J. Wysocki2-50/+51
2024-06-14ALSA: hda: tas2781: Component should be unbound before deconstructionSimon Trimmer1-2/+2
The interface associated with the hda_component should be deactivated before the driver is deconstructed during removal. Fixes: 4e7914eb1dae ("ALSA: hda/tas2781: remove sound controls in unbind") Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-14ALSA: hda: cs35l41: Component should be unbound before deconstructionSimon Trimmer1-2/+2
The interface associated with the hda_component should be deactivated before the driver is deconstructed during removal. Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-14ALSA: hda: cs35l56: Component should be unbound before deconstructionSimon Trimmer1-2/+2
The interface associated with the hda_component should be deactivated before the driver is deconstructed during removal. Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-14Merge branch acpi-x86Rafael J. Wysocki1-14/+10
Merge a fix for a suspend issue related to storage handling on multiple systems based on AMD hardware: - Make more devices put NVMe storage devices into D3 at suspend to work around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello). * branch acpi-x86: ACPI: x86: Force StorageD3Enable on more products
2024-06-14loop: Disable fallocate() zero and discard if not supportedCyril Hrubis1-0/+23
If fallcate is implemented but zero and discard operations are not supported by the filesystem the backing file is on we continue to fill dmesg with errors from the blk_mq_end_request() since each time we call fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate() ends up propagated into the block layer. In the end syscall succeeds since the blkdev_issue_zeroout() falls back to writing zeroes which makes the errors even more misleading and confusing. How to reproduce: 1. make sure /tmp is mounted as tmpfs 2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100 3. losetup /dev/loop0 /tmp/disk.img 4. mkfs.ext2 /dev/loop0 5. dmesg |tail [710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 This patch changes the lo_fallocate() to clear the flags for zero and discard operations if we get EOPNOTSUPP from the backing file fallocate callback, that way we at least stop spewing errors after the first unsuccessful try. CC: Jan Kara <[email protected]> Signed-off-by: Cyril Hrubis <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2024-06-14ata: libata-scsi: Set the RMB bit only for removable media devicesDamien Le Moal1-4/+4
The SCSI Removable Media Bit (RMB) should only be set for removable media, where the device stays and the media changes, e.g. CD-ROM or floppy. The ATA removable media device bit is obsoleted since ATA-8 ACS (2006), but before that it was used to indicate that the device can have its media removed (while the device stays). Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable") introduced a change to set the RMB bit if the port has either the eSATA bit or the hot-plug capable bit set. The reasoning was that the author wanted his eSATA ports to get treated like a USB stick. This is however wrong. See "20-082r23SPC-6: Removable Medium Bit Expectations" which has since been integrated to SPC, which states that: """ Reports have been received that some USB Memory Stick device servers set the removable medium (RMB) bit to one. The rub comes when the medium is actually removed, because... The device server is removed concurrently with the medium removal. If there is no device server, then there is no device server that is waiting to have removable medium inserted. Sufficient numbers of SCSI analysts see such a device: - not as a device that supports removable medium; but - as a removable, hot pluggable device. """ The definition of the RMB bit in the SPC specification has since been clarified to match this. Thus, a USB stick should not have the RMB bit set (and neither shall an eSATA nor a hot-plug capable port). Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as external/removable") then changed so that the RMB bit is only set for the eSATA bit (and not for the hot-plug capable bit), because of a lot of bug reports of SATA devices were being automounted by udisks. However, treating eSATA and hot-plug capable ports differently is not correct. From the AHCI 1.3.1 spec: Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's signal and power connectors are externally accessible via a joint signal and power connector for blindmate device hot plug. So a hot-plug capable port is an external port, just like commit 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") claims. In order to not violate the SPC specification, modify the SCSI INQUIRY data to only set the RMB bit if the ATA device can have its media removed. This fixes a reported problem where GNOME/udisks was automounting devices connected to hot-plug capable ports. Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") Cc: [email protected] Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Thomas Weißschuh <[email protected]> Tested-by: Thomas Weißschuh <[email protected]> Reported-by: Thomas Weißschuh <[email protected]> Closes: https://lore.kernel.org/linux-ide/[email protected]/ Signed-off-by: Damien Le Moal <[email protected]> [cassel: wrote commit message] Signed-off-by: Niklas Cassel <[email protected]>
2024-06-14ovl: fix encoding fid for lower only rootMiklos Szeredi1-1/+5
ovl_check_encode_origin() should return a positive number if the lower dentry is to be encoded, zero otherwise. If there's no upper layer at all (read-only overlay), then it obviously needs to return positive. This was broken by commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles"), which didn't take the lower-only configuration into account. Fix by checking the no-upper-layer case up-front. Reported-and-tested-by: Youzhong Yang <[email protected]> Closes: https://lore.kernel.org/all/CADpNCvaBimi+zCYfRJHvCOhMih8OU0rmZkwLuh24MKKroRuT8Q@mail.gmail.com/ Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Cc: <[email protected]> # v6.6 Signed-off-by: Miklos Szeredi <[email protected]>
2024-06-14Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard651-3552/+6571
Roll -rc3 and current drm/fixes in. This will also unstuck our for-next branch. Signed-off-by: Maxime Ripard <[email protected]>
2024-06-14mfd: axp20x: AXP717: Fix missing IRQ status registers rangeAndre Przywara1-0/+1
While we list the "IRQ status *and acknowledge*" registers as volatile in the MFD description, they are missing from the writable range array, so acknowledging any interrupts was met with an -EIO error. This error propagates up, leading to the whole AXP717 driver failing to probe, which is fatal to most systems using this PMIC, since most peripherals refer one of the PMIC voltage rails. This wasn't noticed on the initial submission, since the interrupt was completely missing at this point, but the DTs now merged describe the interrupt, creating the problem. Add the five registers that hold those bits to the writable array. This fixes the boot on the Anbernic systems using the AXP717 PMIC. Fixes: b5bfc8ab2484 ("mfd: axp20x: Add support for AXP717 PMIC") Reported-by: Chris Morgan <[email protected]> Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: John Watts <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-06-14cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO optionsOndrej Mosnacek1-25/+54
As the comment in this function says, the code currently just clears the CIPSO part with IPOPT_NOP, rather than removing it completely and trimming the packet. The other cipso_v4_*_delattr() functions, however, do the proper removal and also calipso_skbuff_delattr() makes an effort to remove the CALIPSO options instead of replacing them with padding. Some routers treat IPv4 packets with anything (even NOPs) in the option header as a special case and take them through a slower processing path. Consequently, hardening guides such as STIG recommend to configure such routers to drop packets with non-empty IP option headers [1][2]. Thus, users might expect NetLabel to produce packets with minimal padding (or at least with no padding when no actual options are present). Implement the proper option removal to address this and to be closer to what the peer functions do. [1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937 [2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001 Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-06-14cipso: fix total option length computationOndrej Mosnacek1-4/+8
As evident from the definition of ip_options_get(), the IP option IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet the loop that walks the IP options to determine the total IP options length in cipso_v4_delopt() doesn't take IPOPT_END into account. Fix it by recognizing the IPOPT_END value as the end of actual options. Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint") Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-06-14wifi: mac80211: fix monitor channel with chanctx emulationJohannes Berg3-13/+27
After the channel context emulation, there were reports that changing the monitor channel no longer works. This is because those drivers don't have WANT_MONITOR_VIF, so the setting the channel always exits out quickly. Fix this by always allocating the virtual monitor sdata, and simply not telling the driver about it unless it wanted to. This way, we have an interface/sdata to bind the chanctx to, and the emulation can work correctly. Cc: [email protected] Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Reported-and-tested-by: Savyasaachi Vanga <[email protected]> Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-06-14wifi: mac80211: Avoid address calculations via out of bounds array indexingKenton Groombridge1-8/+9
req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 Co-authored-by: Kees Cook <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Kenton Groombridge <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-06-14arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilationspengfuyuan1-8/+0
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n, the compiler will optimize the rest away since they are no longer referenced. The benefit of removing the conditional compilation is that the build is actually tested for both CONFIG_DEBUG_FS configuration values. Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested much and may fail the build due to the conditional compilation. Reported-by: k2ci <[email protected]> Signed-off-by: pengfuyuan <[email protected]> Acked-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2024-06-14USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messagesAlan Stern1-2/+2
The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-06-13io_uring: fix cancellation overwriting req->flagsPavel Begunkov3-3/+5
Only the current owner of a request is allowed to write into req->flags. Hence, the cancellation path should never touch it. Add a new field instead of the flag, move it into the 3rd cache line because it should always be initialised. poll_refs can move further as polling is an involved process anyway. It's a minimal patch, in the future we can and should find a better place for it and remove now unused REQ_F_CANCEL_SEQ. Fixes: 521223d7c229f ("io_uring/cancel: don't default to setting req->work.cancel_seq") Cc: [email protected] Reported-by: Li Shi <[email protected]> Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2024-06-14Merge tag 'drm-xe-fixes-2024-06-13' of ↵Dave Airlie5-12/+38
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Core Changes: - Xe Maintainers update to MAINTAINERS file. Driver Changes: - Use correct forcewake assertions. - Assert that VRAM provisioning is only done on DGFX. - Flush render caches before user-fence signalling on all engines. - Move the disable_c6 call since it was sometimes never called. Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
2024-06-13scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for ↵Bart Van Assche2-0/+13
USB/UAS devices Recently it was reported that the following USB storage devices are unusable with Linux kernel 6.9: * Kingston DataTraveler G2 * Garmin FR35 This is because attempting to read the IO Advice Hints Grouping mode page causes these devices to reset. Hence do not read the IO Advice Hints Grouping mode page from USB/UAS storage devices. Acked-by: Alan Stern <[email protected]> Cc: [email protected] Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Reported-by: Joao Machado <[email protected]> Closes: https://lore.kernel.org/linux-scsi/[email protected]/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f Tested-by: Andy Shevchenko <[email protected]> Bisected-by: Christian Heusel <[email protected]> Reported-by: Andy Shevchenko <[email protected]> Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/ Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-13scsi: core: Introduce the BLIST_SKIP_IO_HINTS flagBart Van Assche2-1/+7
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage devices. Cc: Alan Stern <[email protected]> Cc: Joao Machado <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Christian Heusel <[email protected]> Cc: [email protected] Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-13scsi: ufs: core: Free memory allocated for model before reinitJoel Slebodnick1-0/+1
Under the conditions that a device is to be reinitialized within ufshcd_probe_hba(), the device must first be fully reset. Resetting the device should include freeing U8 model (member of dev_info) but does not, and this causes a memory leak. ufs_put_device_desc() is responsible for freeing model. unreferenced object 0xffff3f63008bee60 (size 32): comm "kworker/u33:1", pid 60, jiffies 4294892642 hex dump (first 32 bytes): 54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ed7ff1a9): [<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40 [<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc [<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190 [<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8 [<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404 [<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370 [<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0 [<ffffb86704f34638>] process_one_work+0x154/0x298 [<ffffb86704f34a74>] worker_thread+0x2f8/0x408 [<ffffb86704f3cfa4>] kthread+0x114/0x118 [<ffffb86704e955a0>] ret_from_fork+0x10/0x20 Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device") Cc: <[email protected]> Reviewed-by: Andrew Halaney <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Joel Slebodnick <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-14Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of ↵Dave Airlie3-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Regression fix - Fix an regression issue by adding 640x480 fallback mode for Exynos HDMI driver. Bug fix - Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function. Code cleanup - Remove redundant driver owner initialization since platform_driver_register() sets it automatically. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13net: mvpp2: use slab_build_skb for oversized framesAryan Srivastava1-1/+4
Setting frag_size to 0 to indicate kmalloc has been deprecated, use slab_build_skb directly. Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Signed-off-by: Aryan Srivastava <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13Merge tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme into block-6.10Jens Axboe5-16/+10
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.10 - Discard double free on error conditions (Chunguang) - Target Fixes (Daniel) - Namespace detachment regression fix (Keith)" * tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme: nvme: fix namespace removal list nvmet: always initialize cqe.result nvmet-passthru: propagate status from id override functions nvme: avoid double free special payload
2024-06-13nvme: fix namespace removal listKeith Busch1-4/+5
This function wants to move a subset of a list from one element to the tail into another list. It also needs to use the srcu synchronize instead of the regular rcu version. Do this one element at a time because that's the only to do it. Fixes: be647e2c76b27f4 ("nvme: use srcu for iterating namespace list") Reported-by: Venkat Rao Bagalkote <[email protected]> Tested-by: Venkat Rao Bagalkote <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-06-13btrfs: zoned: allocate dummy checksums for zoned NODATASUM writesJohannes Thumshirn1-1/+3
Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum. Reported-by: Shinichiro Kawasaki <[email protected]> Fixes: cbfce4c7fbde ("btrfs: optimize the logical to physical mapping for zoned writes") CC: Naohiro Aota <[email protected]> # 6.6+ Tested-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Naohiro Aota <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2024-06-13btrfs: retry block group reclaim without infinite loopBoris Burkov1-2/+9
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from swap) or btrfs_relocate_chunk systematically fails (from lack of space), then this worker becomes an infinite loop. At the very least, this strands the cleaner thread, but can also result in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the reclaim_bgs_lock mutex is not contended. I believe the best long term fix is to manage reclaim via work queue, where we queue up a relocation on the triggering condition and re-queue on failure. In the meantime, this is an easy fix to apply to avoid the immediate pain. Fixes: 7e2718099438 ("btrfs: reinsert BGs failed to reclaim") CC: [email protected] # 6.6+ Signed-off-by: Boris Burkov <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2024-06-13ima: Avoid blocking in RCU read-side critical sectionGUO Zihua11-22/+34
A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. Fixes: c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") Cc: [email protected] Signed-off-by: GUO Zihua <[email protected]> Acked-by: John Johansen <[email protected]> Reviewed-by: Mimi Zohar <[email protected]> Reviewed-by: Casey Schaufler <[email protected]> [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] Signed-off-by: Paul Moore <[email protected]>
2024-06-13bpf: fix UML x86_64 compile failureMaciej Żenczykowski1-1/+1
pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um) Cc: Andrii Nakryiko <[email protected]> Cc: John Fastabend <[email protected]> Cc: Alexei Starovoitov <[email protected]> Fixes: 1ae6921009e5 ("bpf: inline bpf_get_smp_processor_id() helper") Signed-off-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-13selftests/bpf: Add test coverage for reg_set_min_max handlingDaniel Borkmann2-0/+43
Add a test case for the jmp32/k fix to ensure selftests have coverage. Before fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:specs_alloc 0 nsec run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL #492 verifier_or_jmp32_k:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK #492 verifier_or_jmp32_k:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-13bpf: Reduce stack consumption in check_stack_write_fixed_offDaniel Borkmann1-4/+5
The fake_reg moved into env->fake_reg given it consumes a lot of stack space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off() as well now that we have it. Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-13bpf: Fix reg_set_min_max corruption of fake_regDaniel Borkmann2-4/+12
Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_off = tnum_with_subreg(reg1->var_off, t); reg2->var_off = tnum_with_subreg(reg2->var_off, t); [...] Since the verifier is analyzing the false branch of the conditional jump, reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2 is the "fake" register that was meant to hold a constant value. The resulting var_off of the intersection says that both registers now hold a known value of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to make the verifier think that the "constant" value that was passed in the jump operation now holds a different value. Normally this would not be an issue since it should not influence the true branch, however, false_reg2 and true_reg2 are pointers to the same "fake" register. Meaning, the false branch can influence the results of the true branch. In line 24, the verifier assumes R6_w=0, but the actual runtime value in this case is 1. The fix is simply not passing in the same "fake" register location as inputs to reg_set_min_max(), but instead making a copy. Moving the fake_reg into the env also reduces stack consumption by 120 bytes. With this, the verifier successfully rejects invalid accesses from the test program. [0] https://github.com/google/buzzer Fixes: 67420501e868 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons") Reported-by: Juan José López Jaimez <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-13Merge tag 'net-6.10-rc4' of ↵Linus Torvalds40-165/+294
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Slim pickings this time, probably a combination of summer, DevConf.cz, and the end of first half of the year at corporations. Current release - regressions: - Revert "igc: fix a log entry using uninitialized netdev", it traded lack of netdev name in a printk() for a crash Previous releases - regressions: - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - geneve: fix incorrectly setting lengths of inner headers in the skb, confusing the drivers and causing mangled packets - sched: initialize noop_qdisc owner to avoid false-positive recursion detection (recursing on CPU 0), which bubbles up to user space as a sendmsg() error, while noop_qdisc should silently drop - netdevsim: fix backwards compatibility in nsim_get_iflink() Previous releases - always broken: - netfilter: ipset: fix race between namespace cleanup and gc in the list:set type" * tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() af_unix: Read with MSG_PEEK loops if the first unread byte is OOB bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response gve: Clear napi->skb before dev_kfree_skb_any() ionic: fix use after netif_napi_del() Revert "igc: fix a log entry using uninitialized netdev" net: bridge: mst: fix suspicious rcu usage in br_mst_set_state net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state net/ipv6: Fix the RT cache flush via sysctl using a previous delay net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters gve: ignore nonrelevant GSO type bits when processing TSO headers net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload tcp: use signed arithmetic in tcp_rtx_probe0_timed_out() mailmap: map Geliang's new email address mptcp: pm: update add_addr counters after connect mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID mptcp: ensure snd_una is properly initialized on connect ...
2024-06-13Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-33/+81
Pull NFS client fixes from Trond Myklebust: "Bugfixes: - NFSv4.2: Fix a memory leak in nfs4_set_security_label - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long. - NFS: Add appropriate memory barriers to the sillyrename code - Propagate readlink errors in nfs_symlink_filler - NFS: don't invalidate dentries on transient errors - NFS: fix unnecessary synchronous writes in random write workloads - NFSv4.1: enforce rootpath check when deciding whether or not to trunk Other: - Change email address for Trond Myklebust due to email server concerns" * tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add barriers when testing for NFS_FSDATA_BLOCKED SUNRPC: return proper error from gss_wrap_req_priv NFSv4.1 enforce rootpath check in fs_location query NFS: abort nfs_atomic_open_v23 if name is too long. nfs: don't invalidate dentries on transient errors nfs: Avoid flushing many pages with NFS_FILE_SYNC nfs: propagate readlink errors in nfs_symlink_filler MAINTAINERS: Change email address for Trond Myklebust NFSv4: Fix memory leak in nfs4_set_security_label
2024-06-13Merge tag 'fixes-2024-06-13' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: "Fix validation of NUMA coverage. memblock_validate_numa_coverage() was checking for a unset node ID using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was specified by buggy firmware. Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()" * tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node() memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
2024-06-13ice: implement AQ download pkg retryWojciech Drewek1-2/+21
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due to FW issue. Fix this by retrying five times before moving to Safe Mode. Sleep for 20 ms before retrying. This was tested with the 4.40 firmware. Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download") Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: Wojciech Drewek <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-06-13ice: fix 200G link speed message logPaul Greenwalt1-0/+3
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include 200G link speed message support. As a result the driver incorrectly reports Unknown for 200G link speed. Fix this by adding 200G support to ice_print_link_msg(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-06-13ice: avoid IRQ collision to fix init failure on ACPI S3 resumeEn-Wei Wu1-1/+6
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes that irdma would break and report hardware initialization failed after suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5). The problem is caused due to the collision between the irq numbers requested in irdma and the irq numbers requested in other drivers after suspend/resume. The irq numbers used by irdma are derived from ice's ice_pf->msix_entries which stores mappings between MSI-X index and Linux interrupt number. It's supposed to be cleaned up when suspend and rebuilt in resume but it's not, causing irdma using the old irq numbers stored in the old ice_pf->msix_entries to request_irq() when resume. And eventually collide with other drivers. This patch fixes this problem. On suspend, we call ice_deinit_rdma() to clean up the ice_pf->msix_entries (and free the MSI-X vectors used by irdma if we've dynamically allocated them). On resume, we call ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the MSI-X vectors if we would like to dynamically allocate them). Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Tested-by: Cyrus Lien <[email protected]> Signed-off-by: En-Wei Wu <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-06-13bnxt_en: Adjust logging of firmware messages in case of released token in ↵Aleksandr Mishin1-1/+1
__hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by: Michael Chan <[email protected]> Signed-off-by: Aleksandr Mishin <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13af_unix: Read with MSG_PEEK loops if the first unread byte is OOBRao Shoaib1-9/+9
Read with MSG_PEEK flag loops if the first byte to read is an OOB byte. commit 22dd70eb2c3d ("af_unix: Don't peek OOB data without MSG_OOB.") addresses the loop issue but does not address the issue that no data beyond OOB byte can be read. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Rao Shoaib <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded responseMichael Chan2-2/+61
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13.editorconfig: remove trim_trailing_whitespace optionGreg Kroah-Hartman1-3/+0
Some editors (like the vim variants), when seeing "trim_whitespace" decide to do just that for all of the whitespace in the file you are saving, even if it is not on a line that you have modified. This plays havoc with diffs and is NOT something that should be intended. As the "only trim whitespace on modified lines" is not part of the editorconfig standard yet, just delete these lines from the .editorconfig file so that we don't end up with diffs that are automatically rejected by maintainers for containing things they shouldn't. Cc: Danny Lin <[email protected]> Cc: Íñigo Huguet <[email protected]> Cc: Mickaël Salaün <[email protected]> Cc: Masahiro Yamada <[email protected]> Fixes: 5a602de99797 ("Add .editorconfig file for basic formatting") Acked-by: Vincent Mailhol <[email protected]> Link: https://lore.kernel.org/r/2024061137-jawless-dipped-e789@gregkh Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-06-13gve: Clear napi->skb before dev_kfree_skb_any()Ziwei Xiao1-3/+5
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Cc: [email protected] Reported-by: Shailend Chand <[email protected]> Signed-off-by: Ziwei Xiao <[email protected]> Reviewed-by: Harshitha Ramamurthy <[email protected]> Reviewed-by: Shailend Chand <[email protected]> Reviewed-by: Praveen Kaligineedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13ionic: fix use after netif_napi_del()Taehee Yoo1-3/+1
When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13Revert "igc: fix a log entry using uninitialized netdev"Sasha Neftin1-3/+2
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/[email protected]/ [1] Link: https://lore.kernel.org/all/[email protected]/ [2] Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev") Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13ALSA/hda: intel-dsp-config: Document AVS as dsp_driver optionPeter Ujfalusi1-1/+1
dsp_driver=4 will force the AVS driver stack to be used, it is better to docuement this. Fixes: 1affc44ea5dd ("ASoC: Intel: avs: PCI driver implementation") Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.