aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-25selftests/seccomp: Prepare for exclusive seccomp flagsKees Cook1-9/+25
Some seccomp flags will become exclusive, so the selftest needs to be adjusted to mask those out and test them individually for the "all flags" tests. Cc: [email protected] # v5.0+ Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Tycho Andersen <[email protected]> Acked-by: James Morris <[email protected]>
2019-04-26power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUGAndrey Smirnov1-6/+0
Fix a similar endless event loop as was done in commit 8dcf32175b4e ("i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE"): The culprit is the dev_dbg printk in the i2c uevent handler. If this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results in an endless loop with systemd-journald. This happens if user-space scans the system log and reads the uevent file to get information about a newly created device, which seems fair use to me. Unfortunately reading the "uevent" file uses the same function that runs for creating the uevent for a new device, generating the next syslog entry Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former seems to have been fixed. Drop debug prints as it was done in I2C subsystem to resolve the issue. Signed-off-by: Andrey Smirnov <[email protected]> Cc: Chris Healy <[email protected]> Cc: [email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2019-04-25mtd: rawnand: marvell: Clean the controller state before each operationMiquel Raynal1-6/+6
Since the migration of the driver to stop using the legacy ->select_chip() hook, there is nothing deselecting the target anymore, thus the selection is not forced at the next access. Ensure the ND_RUN bit and the interrupts are always in a clean state. Cc: Daniel Mack <[email protected]> Cc: [email protected] Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Suggested-by: Boris Brezillon <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Tested-by: Daniel Mack <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-04-25ASoC: Intel: bytcr_rt5651: align quirk override handlingPierre-Louis Bossart1-3/+3
As discussed on alsa-devel, a zero value is useful to get rid of all quirks. Set default to -1 and align types as done in other machine drivers. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: Intel: bytcr_rt5640: align quirk override handlingPierre-Louis Bossart1-3/+3
As discussed on alsa-devel, a zero value is useful to get rid of all quirks. Set default to -1 and align types as done in other machine drivers. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: Intel: bytcht_es8316: fix compilation warningPierre-Louis Bossart1-3/+4
Remove warning below, align with other machine drivers. bytcht_es8316.c:508:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] quirk = (int)dmi_id->driver_data; ^ Fixes: a8d218f4fe811 ('ASoC: Intel: bytcht_es8316: Add quirk for the Teclast X98+ II') Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: fsl_sai: Add support for runtime pmDaniel Baluta1-5/+17
Basically the same actions as for system PM, so make use of pm_runtime_force_suspend/pm_runtime_force_resume. Signed-off-by: Shengjiu Wang <[email protected]> Signed-off-by: Daniel Baluta <[email protected]> Acked-by: Nicolin Chen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: fsl_sai: Update is_slave_mode with correct valueDaniel Baluta1-0/+2
is_slave_mode defaults to false because sai structure that contains it is kzalloc'ed. Anyhow, if we decide to set the following configuration SAI slave -> SAI master, is_slave_mode will remain set on true although SAI being master it should be set to false. Fix this by updating is_slave_mode for each call of fsl_sai_set_dai_fmt. Signed-off-by: Daniel Baluta <[email protected]> Acked-by: Nicolin Chen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: doc: simple-card: Add pin-switches propertyPaul Cercueil1-0/+2
The simple-audio-card,pin-switches property can contain the list of widget names for which pin switches must be created. Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: sprd: Add Spreadtrum multi-channel data transfer supportBaolin Wang4-0/+1128
On Spreadtrum platform, the audio subsystem will use the multi-channel data transfer controller to transfer sound stream between audio subsystem and other AP/CP subsystem. It can support 10 DAC channel and 10 ADC channel, and each channel has 512 bytes depth data fifo. Moreover each channel can be used DMA mode or interrupt mode to transfer data. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25dt-bindings: ASoC: Add Spreadtrum multi-channel data transfer supportBaolin Wang1-0/+19
On Spreadtrum platform, the audio subsystem will use the multi-channel data transfer controller to transfer sound stream between audio subsystem and other AP/CP subsystem. It can support 10 DAC channel and 10 ADC channel, and each channel has 512 bytes depth data fifo. Moreover each channel can be used DMA mode or interrupt mode to transfer data. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: codecs: rt5682: initialize mutex before usingXun Zhang1-1/+1
In rt5682 codec driver, a mutex called "calibrate_mutex" is used in rt5682_calibrate() before initialization, which causes warning in lock debug. Move the initialization before the usage of mutex. Signed-off-by: Xun Zhang <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: stm32: i2s: return the get_irq errorFabien Dessenne1-2/+3
During probe, return the "get_irq" error value instead of -ENOENT. This allows the driver to be deferred probed if needed. Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25ASoC: rsnd: fixup 6ch settings to 8chKuninori Morimoto3-5/+16
rsnd need to use 8ch clock settings for 6ch for TDM. Otherwise, it can't work correctly. This patch fixup it. Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-04-25sched/numa: Fix a possible divide-by-zeroXie XiuQi1-0/+4
sched_clock_cpu() may not be consistent between CPUs. If a task migrates to another CPU, then se.exec_start is set to that CPU's rq_clock_task() by update_stats_curr_start(). Specifically, the new value might be before the old value due to clock skew. So then if in numa_get_avg_runtime() the expression: 'now - p->last_task_numa_placement' ends up as -1, then the divider '*period + 1' in task_numa_placement() is 0 and things go bang. Similar to update_curr(), check if time goes backwards to avoid this. [ peterz: Wrote new changelog. ] [ mingo: Tweaked the code comment. ] Signed-off-by: Xie XiuQi <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-25Merge tag 'ceph-for-5.1-rc7' of git://github.com/ceph/ceph-clientLinus Torvalds4-14/+85
Pull ceph fixes from Ilya Dryomov: "dentry name handling fixes from Jeff and a memory leak fix from Zheng. Both are old issues, marked for stable" * tag 'ceph-for-5.1-rc7' of git://github.com/ceph/ceph-client: ceph: fix ci->i_head_snapc leak ceph: handle the case where a dentry has been renamed on outstanding req ceph: ensure d_name stability in ceph_dentry_hash() ceph: only use d_name directly when parent is locked
2019-04-25Merge branch 'linus' of ↵Linus Torvalds2-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bug in xts and lrw where they may sleep in an atomic context" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: lrw - Fix atomic sleep when walking skcipher crypto: xts - Fix atomic sleep when walking skcipher
2019-04-25clk: Add missing stubs for a few functionsDmitry Osipenko1-0/+16
Compilation fails if any of undeclared clk_set_*() functions are in use and CONFIG_HAVE_CLK=n. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-04-25RDMA/hns: Bugfix for mapping user dbLijun Ou1-1/+1
When the maximum send wr delivered by the user is zero, the qp does not have a sq. When allocating the sq db buffer to store the user sq pi pointer and map it to the kernel mode, max_send_wr is used as the trigger condition, while the kernel does not consider the max_send_wr trigger condition when mapmping db. It will cause sq record doorbell map fail and create qp fail. The failed print information as follows: hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000 hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff hns3 0000:7d:00.1: sq record doorbell map failed! hns3 0000:7d:00.1: Create RC QP failed Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Signed-off-by: Lijun Ou <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-04-25KVM: arm/arm64: Don't emulate virtual timers on userspace ioctlsChristoffer Dall1-5/+8
When a VCPU never runs before a guest exists, but we set timer registers up via ioctls, the associated hrtimer might never get cancelled. Since we moved vcpu_load/put into the arch-specific implementations and only have load/put for KVM_RUN, we won't ever have a scheduled hrtimer for emulating a timer when modifying the timer state via an ioctl from user space. All we need to do is make sure that we pick up the right state when we load the timer state next time userspace calls KVM_RUN again. We also do not need to worry about this interacting with the bg_timer, because if we were in WFI from the guest, and somehow ended up in a kvm_arm_timer_set_reg, it means that: 1. the VCPU thread has received a signal, 2. we have called vcpu_load when being scheduled in again, 3. we have called vcpu_put when we returned to userspace for it to issue another ioctl And therefore will not have a bg_timer programmed and the event is treated as a spurious wakeup from WFI if userspace decides to run the vcpu again even if there are not virtual interrupts. This fixes stray virtual timer interrupts triggered by an expiring hrtimer, which happens after a failed live migration, for instance. Fixes: bee038a674875 ("KVM: arm/arm64: Rework the timer code to use a timer_map") Signed-off-by: Christoffer Dall <[email protected]> Reported-by: Andre Przywara <[email protected]> Tested-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-04-25btrfs: Switch memory allocations in async csum calculation path to kvmallocNikolay Borisov2-5/+13
Recent multi-page biovec rework allowed creation of bios that can span large regions - up to 128 megabytes in the case of btrfs. OTOH btrfs' submission path currently allocates a contiguous array to store the checksums for every bio submitted. This means we can request up to (128mb / BTRFS_SECTOR_SIZE) * 4 bytes + 32bytes of memory from kmalloc. On busy systems with possibly fragmented memory said kmalloc can fail which will trigger BUG_ON due to improper error handling IO submission context in btrfs. Until error handling is improved or bios in btrfs limited to a more manageable size (e.g. 1m) let's use kvmalloc to fallback to vmalloc for such large allocations. There is no hard requirement that the memory allocated for checksums during IO submission has to be contiguous, but this is a simple fix that does not require several non-contiguous allocations. For small writes this is unlikely to have any visible effect since kmalloc will still satisfy allocation requests as usual. For larger requests the code will just fallback to vmalloc. We've performed evaluation on several workload types and there was no significant difference kmalloc vs kvmalloc. Signed-off-by: Nikolay Borisov <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-04-25mwifiex: Make resume actually do something useful again on SDIO cardsDouglas Anderson1-1/+1
The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") had a fairly straightforward bug in it. It contained this bit of diff: - if (!adapter->is_suspended) { + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { As you can see the patch missed the "!" when converting to the atomic bitops. This meant that the resume hasn't done anything at all since that commit landed and suspend/resume for mwifiex SDIO cards has been totally broken. After fixing this mwifiex suspend/resume appears to work again, at least with the simple testing I've done. Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") Cc: <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-25kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THPSuzuki K Poulose1-1/+5
With commit a80868f398554842b14, we no longer ensure that the THP page is properly aligned in the guest IPA. Skip the stage2 huge mapping for unaligned IPA backed by transparent hugepages. Fixes: a80868f398554842b14 ("KVM: arm/arm64: Enforce PTE mappings at stage2 when needed") Reported-by: Eric Auger <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Chirstoffer Dall <[email protected]> Cc: Zenghui Yu <[email protected]> Cc: Zheng Xiang <[email protected]> Cc: Andrew Murray <[email protected]> Cc: Eric Auger <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-04-25KVM: arm/arm64: Ensure vcpu target is unset on reset failureAndrew Jones1-3/+8
A failed KVM_ARM_VCPU_INIT should not set the vcpu target, as the vcpu target is used by kvm_vcpu_initialized() to determine if other vcpu ioctls may proceed. We need to set the target before calling kvm_reset_vcpu(), but if that call fails, we should then unset it and clear the feature bitmap while we're at it. Signed-off-by: Andrew Jones <[email protected]> [maz: Simplified patch, completed commit message] Signed-off-by: Marc Zyngier <[email protected]>
2019-04-25USB: w1 ds2490: Fix bug caused by improper use of altsetting arrayAlan Stern1-3/+3
The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings. The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry. Signed-off-by: Alan Stern <[email protected]> Reported-and-tested-by: [email protected] CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-25USB: yurex: Fix protection fault after device removalAlan Stern1-0/+1
The syzkaller USB fuzzer found a general-protection-fault bug in the yurex driver. The fault occurs when a device has been unplugged; the driver's interrupt-URB handler logs an error message referring to the device by name, after the device has been unregistered and its name deallocated. This problem is caused by the fact that the interrupt URB isn't cancelled until the driver's private data structure is released, which can happen long after the device is gone. The cure is to make sure that the interrupt URB is killed before yurex_disconnect() returns; this is exactly the sort of thing that usb_poison_urb() was meant for. Signed-off-by: Alan Stern <[email protected]> Reported-and-tested-by: [email protected] CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-25usb: usbip: fix isoc packet num validation in get_pipeMalte Leip2-9/+10
Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c Background/reason: The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver. Fixes: c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") Signed-off-by: Malte Leip <[email protected]> Cc: stable <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-25drm/bridge: dw-hdmi: fix SCDC configuration for ddc-i2c-busJonas Karlman1-4/+8
When ddc-i2c-bus property is used, a NULL pointer dereference is reported: [ 31.041669] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 31.041671] pgd = 4d3c16f6 [ 31.041673] [00000008] *pgd=00000000 [ 31.041678] Internal error: Oops: 5 [#1] SMP ARM [ 31.041711] Hardware name: Rockchip (Device Tree) [ 31.041718] PC is at i2c_transfer+0x8/0xe4 [ 31.041721] LR is at drm_scdc_read+0x54/0x84 [ 31.041723] pc : [<c073273c>] lr : [<c05926c4>] psr: 280f0013 [ 31.041725] sp : edffdad0 ip : 5ccb5511 fp : 00000058 [ 31.041727] r10: 00000780 r9 : edf91608 r8 : c11b0f48 [ 31.041728] r7 : 00000438 r6 : 00000000 r5 : 00000000 r4 : 00000000 [ 31.041730] r3 : edffdae7 r2 : 00000002 r1 : edffdaec r0 : 00000000 [ 31.041908] [<c073273c>] (i2c_transfer) from [<c05926c4>] (drm_scdc_read+0x54/0x84) [ 31.041913] [<c05926c4>] (drm_scdc_read) from [<c0592858>] (drm_scdc_set_scrambling+0x30/0xbc) [ 31.041919] [<c0592858>] (drm_scdc_set_scrambling) from [<c05cc0f4>] (dw_hdmi_update_power+0x1440/0x1610) [ 31.041926] [<c05cc0f4>] (dw_hdmi_update_power) from [<c05cc574>] (dw_hdmi_bridge_enable+0x2c/0x70) [ 31.041932] [<c05cc574>] (dw_hdmi_bridge_enable) from [<c05aed48>] (drm_bridge_enable+0x24/0x34) [ 31.041938] [<c05aed48>] (drm_bridge_enable) from [<c0591060>] (drm_atomic_helper_commit_modeset_enables+0x114/0x220) [ 31.041943] [<c0591060>] (drm_atomic_helper_commit_modeset_enables) from [<c05c3fe0>] (rockchip_atomic_helper_commit_tail_rpm+0x28/0x64) hdmi->i2c may not be set when ddc-i2c-bus property is used in device tree. Fix this by using hdmi->ddc as the i2c adapter when calling drm_scdc_*(). Also report that SCDC is not supported when there is no DDC bus. Fixes: 264fce6cc2c1 ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/VE1PR03MB59031814B5BCAB2152923BDAAC210@VE1PR03MB5903.eurprd03.prod.outlook.com
2019-04-25gpio: Fix gpiochip_add_data_with_key() error pathGeert Uytterhoeven1-4/+8
The err_remove_chip block is too coarse, and may perform cleanup that must not be done. E.g. if of_gpiochip_add() fails, of_gpiochip_remove() is still called, causing: OF: ERROR: Bad of_node_put() on /soc/gpio@e6050000 CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.1.0-rc2-koelsch+ #407 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) Workqueue: events deferred_probe_work_func [<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14) [<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c) [<c07c1224>] (dump_stack) from [<c07c5a80>] (kobject_put+0x94/0xbc) [<c07c5a80>] (kobject_put) from [<c0470420>] (gpiochip_add_data_with_key+0x8d8/0xa3c) [<c0470420>] (gpiochip_add_data_with_key) from [<c0473738>] (gpio_rcar_probe+0x1d4/0x314) [<c0473738>] (gpio_rcar_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94) and later, if a GPIO consumer tries to use a GPIO from a failed controller: WARNING: CPU: 0 PID: 1 at lib/refcount.c:156 kobject_get+0x38/0x4c refcount_t: increment on 0; use-after-free. Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc2-koelsch+ #407 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14) [<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c) [<c07c1224>] (dump_stack) from [<c0221580>] (__warn+0xd0/0xec) [<c0221580>] (__warn) from [<c02215e0>] (warn_slowpath_fmt+0x44/0x6c) [<c02215e0>] (warn_slowpath_fmt) from [<c07c58fc>] (kobject_get+0x38/0x4c) [<c07c58fc>] (kobject_get) from [<c068b3ec>] (of_node_get+0x14/0x1c) [<c068b3ec>] (of_node_get) from [<c0686f24>] (of_find_node_by_phandle+0xc0/0xf0) [<c0686f24>] (of_find_node_by_phandle) from [<c0686fbc>] (of_phandle_iterator_next+0x68/0x154) [<c0686fbc>] (of_phandle_iterator_next) from [<c0687fe4>] (__of_parse_phandle_with_args+0x40/0xd0) [<c0687fe4>] (__of_parse_phandle_with_args) from [<c0688204>] (of_parse_phandle_with_args_map+0x100/0x3ac) [<c0688204>] (of_parse_phandle_with_args_map) from [<c0471240>] (of_get_named_gpiod_flags+0x38/0x380) [<c0471240>] (of_get_named_gpiod_flags) from [<c046f864>] (gpiod_get_from_of_node+0x24/0xd8) [<c046f864>] (gpiod_get_from_of_node) from [<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child+0xa0/0x144) [<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child) from [<c05f425c>] (gpio_keys_probe+0x418/0x7bc) [<c05f425c>] (gpio_keys_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94) Fix this by splitting the cleanup block, and adding a missing call to gpiochip_irqchip_remove(). Fixes: 28355f81969962cf ("gpio: defer probe if pinctrl cannot be found") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-04-25drm/vmwgfx: Fix dma API layer violationThomas Hellstrom1-28/+5
Remove the check for IOMMU presence since it was considered a layer violation. This means we have no reliable way to destinguish between coherent hardware IOMMU DMA address translations and incoherent SWIOTLB DMA address translations, which we can't handle. So always presume the former. This means that if anybody forces SWIOTLB without also setting the vmw_force_coherent=1 vmwgfx option, driver operation will fail, like it will on most other graphics drivers. Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2019-04-25perf/x86/intel: Update KBL Package C-state events to also include ↵Harry Pan1-5/+5
PC8/PC9/PC10 counters Kaby Lake (and Coffee Lake) has PC8/PC9/PC10 residency counters. This patch updates the list of Kaby/Coffee Lake PMU event counters from the snb_cstates[] list of events to the hswult_cstates[] list of events, which keeps all previously supported events and also adds the PKG_C8, PKG_C9 and PKG_C10 residency counters. This allows user space tools to profile them through the perf interface. Signed-off-by: Harry Pan <[email protected]> Cc: <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds61-184/+687
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
2019-04-24Merge tag 'leds-for-5.1-rc7' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED update from Jacek Anaszewski: "A single change to MAINTAINERS: We announce a new LED reviewer - Dan Murphy" * tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
2019-04-24ipv4: add sanity checks in ipv4_link_failure()Eric Dumazet1-9/+23
Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <[email protected]> Cc: Stephen Suryaputra <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net/rose: fix unbound loop in rose_loopback_timer()Eric Dumazet1-11/+16
This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24rxrpc: fix race condition in rxrpc_input_packet()Eric Dumazet2-5/+10
After commit 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <[email protected]> and Julia Lawall <[email protected]>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24MAINTAINERS: LEDs: Add designated reviewer for LED subsystemDan Murphy1-0/+1
Add a designated reviewer for the LED subsystem as there are already two maintainers assigned. Signed-off-by: Dan Murphy <[email protected]> Acked-by: Pavel Machek <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
2019-04-24net: rds: exchange of 8K and 1M poolZhu Yanjun2-3/+11
Before the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea5967b0d ("RDS: IB: move FMR code to its own file") Signed-off-by: Zhu Yanjun <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net: vrf: Fix operation not supported when set vrf macMiaohe Lin1-0/+2
Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <[email protected]> Signed-off-by: Miaohe Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net: ieee802154: fix missing checks for regmap_update_bitsKangjie Lu1-0/+6
regmap_update_bits could fail and deserves a check. The patch adds the checks and if it fails, returns its error code upstream. Signed-off-by: Kangjie Lu <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Stefan Schmidt <[email protected]>
2019-04-24cifs: fix page reference leak with readv/writevJérôme Glisse2-15/+23
CIFS can leak pages reference gotten through GUP (get_user_pages*() through iov_iter_get_pages()). This happen if cifs_send_async_read() or cifs_write_from_iter() calls fail from within __cifs_readv() and __cifs_writev() respectively. This patch move page unreference to cifs_aio_ctx_release() which will happens on all code paths this is all simpler to follow for correctness. Signed-off-by: Jérôme Glisse <[email protected]> Cc: Steve French <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Alexander Viro <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Stable <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2019-04-24cifs: do not attempt cifs operation on smb2+ rename errorFrank Sorenson1-0/+4
A path-based rename returning EBUSY will incorrectly try opening the file with a cifs (NT Create AndX) operation on an smb2+ mount, which causes the server to force a session close. If the mount is smb2+, skip the fallback. Signed-off-by: Frank Sorenson <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2019-04-24cifs: fix memory leak in SMB2_readRonnie Sahlberg1-0/+1
Commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e introduced a leak where if SMB2_read() returned an error we would return without freeing the request buffer. Cc: Stable <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-04-24Input: synaptics-rmi4 - fix possible double freePan Bian1-5/+1
The RMI4 function structure has been released in rmi_register_function if error occurs. However, it will be released again in the function rmi_create_function, which may result in a double-free bug. Signed-off-by: Pan Bian <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2019-04-24RDMA/ucontext: Fix regression with disassociateJason Gunthorpe2-3/+50
When this code was consolidated the intention was that the VMA would become backed by anonymous zero pages after the zap_vma_pte - however this very subtly relied on setting the vm_ops = NULL and clearing the VM_SHARED bits to transform the VMA into an anonymous VMA. Since the vm_ops was removed this broke. Now userspace gets a SIGBUS if it touches the vma after disassociation. Instead of converting the VMA to anonymous provide a fault handler that puts a zero'd page into the VMA when user-space touches it after disassociation. Cc: [email protected] Suggested-by: Andrea Arcangeli <[email protected]> Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-04-24Input: snvs_pwrkey - make it depend on ARCH_MXCJacky Bai1-1/+1
The SNVS power key is not only used on i.MX6SX and i.MX7D, it is also used by i.MX6UL and NXP's latest ARMv8 based i.MX8M series SOC. So update the config dependency to use ARCH_MXC, and add the COMPILE_TEST too. Signed-off-by: Jacky Bai <[email protected]> Reviewed-by: Dong Aisheng <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2019-04-24RDMA/mlx5: Use rdma_user_map_io for mapping BAR pagesJason Gunthorpe1-5/+3
Since mlx5 supports device disassociate it must use this API for all BAR page mmaps, otherwise the pages can remain mapped after the device is unplugged causing a system crash. Cc: [email protected] Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Haggai Eran <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2019-04-24RDMA/mlx5: Do not allow the user to write to the clock pageJason Gunthorpe1-0/+2
The intent of this VMA was to be read-only from user space, but the VM_MAYWRITE masking was missed, so mprotect could make it writable. Cc: [email protected] Fixes: 5c99eaecb1fc ("IB/mlx5: Mmap the HCA's clock info to user-space") Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Haggai Eran <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2019-04-24drm/vc4: Fix compilation error reported by kbuild test botMaarten Lankhorst1-1/+1
A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by: Maarten Lankhorst <[email protected]> Reported-by: kbuild test robot <[email protected]> Cc: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.") Cc: <[email protected]> # v4.6+ Acked-by: Daniel Vetter <[email protected]>
2019-04-24Merge tag 'iwlwifi-for-kalle-2019-04-19' of ↵Kalle Valo7-16/+34
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Third batch of iwlwifi fixes intended for v5.1 * Fix an oops when creating debugfs entries; * Fix bug when trying to capture debugging info while in rfkill; * Prevent potential uninitialized memory dumps into debugging logs; * Fix some initialization parameters for AX210 devices; * Fix an oops with non-MSIX devices;
Powered by cgit, Gruvboxed by Blaster4385.