| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are some Renesas and AMD driver fixes, the AMD fix affects
important laptops in the wild so this one is pretty important. It
seems a bit tough to get this right.
- Fix DT parsing and related locking in the Renesas driver.
- Fix wakeup IRQs in the AMD driver once again. Really tricky this
one"
* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Mask wake bits on probe again
pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last bits for 6.5. It's slightly higher LOCs than
wished, but it doesn't look scary.
The biggest change is MAINTAINERS update for TI; it's good to have the
update before the final release, so that people can contact to the
right persons for bug reports (which shouldn't happen of course!)
The rest are all device-specific fixes and quirks, most for various
ASoC platforms"
* tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ
ALSA: ymfpci: Fix the missing snd_card_free() call at probe error
ASoC: cs35l41: Correct amp_gain_tlv values
ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x
ASoC: tas2781: fixed register access error when switching to other chips
ASoC: cs35l56: Add an ACPI match table
ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
ASoC: SOF: ipc4-pcm: fix possible null pointer deference
MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS
|
|
The initial aim is to silence the following objtool warning:
arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread()
According to tools/objtool/Documentation/objtool.txt, this is because
the last instruction of arch_cpu_idle_dead() is a call to a noreturn
function play_dead(). In order to silence the warning, one simple way
is to add the noreturn function play_dead() to objtool's hard-coded
global_noreturns array, that is to say, just put "NORETURN(play_dead)"
into tools/objtool/noreturns.h, it works well.
But I noticed that play_dead() is only defined once and only called by
arch_cpu_idle_dead(), so put the body of play_dead() into the caller
arch_cpu_idle_dead(), then remove the noreturn function play_dead() is
an alternative way which can reduce the overhead of the function call
at the same time.
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Add identifier names to arguments of die() declaration in ptrace.h
to fix the following checkpatch warnings:
WARNING: function definition argument 'const char *' should also have an identifier name
WARNING: function definition argument 'struct pt_regs *' should also have an identifier name
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
After the call to oops_exit(), it should not panic or execute
the crash kernel if the oops is to be suppressed.
Suggested-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.
Commit 20c0d2d44029 ("[PATCH] i386: pass proper trap numbers to die
chain handlers") may be the earliest of similar changes.
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
All *.S files under arch/loongarch/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Commit ddb5cdbafaaad ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
There is no EXPORT_SYMBOL() line there, hence #include <asm/export.h>
is unneeded.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
As explained by Nick in the original issue: the kernel usually does a
good job of providing library helpers that have similar semantics as
their ordinary userspace libc equivalents, but -ffreestanding disables
such libcall optimization and other related features in the compiler,
which can lead to unexpected things such as CONFIG_FORTIFY_SOURCE not
working (!).
However, due to the desire for better control over unaligned accesses
with respect to CONFIG_ARCH_STRICT_ALIGN, and also for avoiding the
GCC bug https://gcc.gnu.org/PR109465, we do want to still disable
optimizations for the memory libcalls (memcpy, memmove and memset for
now). Use finer-grained -fno-builtin-* toggles to achieve this without
losing source fortification and other libcall optimizations.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1897
Reported-by: Nathan Chancellor <[email protected]>
Suggested-by: Nick Desaulniers <[email protected]>
Signed-off-by: WANG Xuerui <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In drivers/Kconfig, drivers/firmware/Kconfig is sourced for all ports so
there is no need to source it in the port-specific Kconfig file. And
sourcing it here also caused the "Firmware Drivers" menu appeared two
times: one in the "Device Drivers" menu, another in the toplevel menu.
This is really puzzling so remove it.
Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Xi Ruoyao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"A bit bigger than I'd care for, but it's mostly a single vmwgfx fix
and a fix for an i915 hotplug probing. Otherwise misc i915, bridge,
panfrost and dma-buf fixes.
core:
- add a HPD poll helper
i915:
- fix regression in i915 polling
- fix docs build warning
- fix DG2 idle power consumption
bridge:
- samsung-dsim: init fix
panfrost:
- fix speed binning issue
dma-buf:
- fix recursive lock in fence signal
vmwgfx:
- fix shader stage validation
- fix NULL ptr derefs in gem put"
* tag 'drm-fixes-2023-08-25' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/vmwgfx: Fix possible invalid drm gem put calls
drm/vmwgfx: Fix shader stage validation
dma-buf/sw_sync: Avoid recursive lock during fence signal
drm/i915: fix Sphinx indentation warning
drm/i915/dgfx: Enable d3cold at s2idle
drm/display/dp: Fix the DP DSC Receiver cap size
drm/panfrost: Skip speed binning on EOPNOTSUPP
drm: bridge: samsung-dsim: Fix init during host transfer
|
|
enc_dec_hypercall() accepted a page count instead of a size, which
forced its callers to round up. As a result, non-page aligned
vaddrs caused pages to be spuriously marked as decrypted via the
encryption status hypercall, which in turn caused consistent
corruption of pages during live migration. Live migration requires
accurate encryption status information to avoid migrating pages
from the wrong perspective.
Fixes: 064ce6c550a0 ("mm: x86: Invoke hypercall when page encryption status is changed")
Signed-off-by: Steve Rutherford <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Reviewed-by: Pankaj Gupta <[email protected]>
Tested-by: Ben Hillier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Quirk for v6.5
One additional fix for v6.5, an additional quirk. As with the other
fixes this could wait for the merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix ring buffer being permanently disabled due to missed
record_disabled()
Changing the trace cpu mask will disable the ring buffers for the
CPUs no longer in the mask. But it fails to update the snapshot
buffer. If a snapshot takes place, the accounting for the ring buffer
being disabled is corrupted and this can lead to the ring buffer
being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the
close iteration. While a trace is being read, it is still possible to
change the tracer.
If this happens between the function graph tracer and the wakeup
tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the
wakeup function did not initialize its private pointer to NULL, which
is used to know if the function graph tracer was the last tracer. It
could be fooled in thinking it is, but then on exit it does not call
the close function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the
end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from
being opened by more than one task (file descriptor).
There was a race found where if splice is called, the iter->ent could
become stale and events could be missed. There's no point reading a
producer/consumer file by more than one task as they will corrupt
each other anyway. Add a cpumask that keeps track of the per_cpu
trace_pipe files as well as the global trace_pipe file that prevents
more than one open of a trace_pipe file that represents the same ring
buffer. This prevents the race from happening.
- Fix ftrace samples for arm64 to work with older compilers.
* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
samples: ftrace: Replace bti assembly with hint for older compiler
tracing: Introduce pipe_cpumask to avoid race on trace_pipes
tracing: Fix memleak due to race between current_tracer and trace
tracing/synthetic: Allocate one additional element for size
tracing/synthetic: Skip first entry for stack traces
tracing/synthetic: Use union instead of casts
selftests/ftrace: Add a basic testcase for snapshot
tracing: Fix cpu buffers unavailable due to 'record_disabled' missed
|
|
Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.
Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails")
Signed-off-by: Zhu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"Fix a potential array out-of-bounds in the mediatek vcodec driver"
* tag 'media/v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vcodec: Fix potential array out-of-bounds in encoder queue_setup
|
|
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails")
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix power consumption at s2idle on DG2 (Anshuman)
- Fix documentation build warning (Jani)
- Fix Display HPD (Imre)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZOdPRFSJpo0ErPX/@intel.com
|
|
smaps_pte_hole_lookup() is calling shmem_partial_swap_usage() with page
table lock held: but shmem_partial_swap_usage() does cond_resched_rcu() if
need_resched(): "BUG: sleeping function called from invalid context".
Since shmem_partial_swap_usage() is designed to count across a range, but
smaps_pte_hole_lookup() only calls it for a single page slot, just break
out of the loop on the last or only page, before checking need_resched().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 230100321518 ("mm/smaps: simplify shmem handling of pte holes")
Signed-off-by: Hugh Dickins <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: <[email protected]> [5.16+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
The cachestat kselftest runs a test on a normal file, which is created
temporarily in the current directory. Among the tests it runs there is a
call to fsync(), which is expected to clean all dirty pages used by the
file.
However the tmpfs filesystem implements fsync() as noop_fsync(), so the
call will not even attempt to clean anything when this test file happens
to live on a tmpfs instance. This happens in an initramfs, or when the
current directory is in /dev/shm or sometimes /tmp.
To avoid this test failing wrongly, use statfs() to check which filesystem
the test file lives on. If that is "tmpfs", we skip the fsync() test.
Since the fsync test is only one part of the "normal file" test, we now
execute this twice, skipping the fsync part on the first call. This way
only the second test, including the fsync part, would be skipped.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andre Przywara <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "selftests: cachestat: fix run on older kernels", v2.
I ran all kernel selftests on some test machine, and stumbled upon
cachestat failing (among others). These patches fix the run on older
kernels and when the current directory is on a tmpfs instance.
This patch (of 2):
As cachestat is a new syscall, it won't be available on older kernels, for
instance those running on a development machine. At the moment the test
reports all tests as "not ok" in this case.
Test for the cachestat syscall availability first, before doing further
tests, and bail out early with a TAP SKIP comment.
This also uses the opportunity to add the proper TAP headers, and add one
check for proper error handling (illegal file descriptor).
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Nhat Pham <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.
During the analysis of the mas_next_slot() the following was
artificially created by separating the writer and reader code:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata
read old end pivot
return with incorrect range
store new value
Alternatively:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata
read old end pivot
read new end pivot
return with incorrect range
set old end pivot
There may be other accesses that are not safe since we are now updating
both metadata and pointers, so disabling append if there could be rcu
readers is the safest action.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
for sharing check
Commit 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a
folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.
It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a folio")
Signed-off-by: Yin Fengwei <[email protected]>
Reviewed-by: Yu Zhao <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
for sharing check
Commit fc986a38b670 ("mm: huge_memory: convert madvise_free_huge_pmd to
use a folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.
It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: fc986a38b670 ("mm: huge_memory: convert madvise_free_huge_pmd to use a folio")
Signed-off-by: Yin Fengwei <[email protected]>
Reviewed-by: Yu Zhao <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
large folio for sharing check
Patch series "don't use mapcount() to check large folio sharing", v2.
In madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(),
folio_mapcount() is used to check whether the folio is shared. But it's
not correct as folio_mapcount() returns total mapcount of large folio.
Use folio_estimated_sharers() here as the estimated number is enough.
This patchset will fix the cases:
User space application call madvise() with MADV_FREE, MADV_COLD and
MADV_PAGEOUT for specific address range. There are THP mapped to the
range. Without the patchset, the THP is skipped. With the patch, the
THP will be split and handled accordingly.
David reported the cow self test skip some cases because of MADV_PAGEOUT
skip THP:
https://lore.kernel.org/linux-mm/[email protected]/T/#mbf0f2ec7fbe45da47526de1d7036183981691e81
and I confirmed this patchset make it work again.
This patch (of 3):
Commit 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range()
to use folios") replaced the page_mapcount() with folio_mapcount() to
check whether the folio is shared by other mapping.
It's not correct for large folio. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range() to use folios")
Signed-off-by: Yin Fengwei <[email protected]>
Reviewed-by: Yu Zhao <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Two last-minute one-liners for v6.5-rc. One got lost in the shuffle,
and the other was reported just this morning"
- Close race window when handling FREE_STATEID operations
- Fix regression in /proc/fs/nfsd/v4_end_grace introduced in v6.5-rc"
* tag 'nfsd-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix a thinko introduced by recent trace point changes
nfsd: Fix race to FREE_STATEID and cl_revoked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple more small driver specific fixes for v6.5.
The device mode for Cadence had been broken by some recent updates
done for host mode and large transfers for multi-byte words on stm32
had been broken by an API update in what I think was a rebasing
incident"
* tag 'spi-fix-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence: Fix data corruption issues in slave mode
spi: stm32: fix accidential revert to byte-sized transfer splitting
|
|
When building the kernel with binutils 2.37 and GCC-11.1.0/GCC-11.2.0,
the following error occurs:
Assembler messages:
Error: cannot find default versions of the ISA extension `zicsr'
Error: cannot find default versions of the ISA extension `zifencei'
The above error originated from this commit of binutils[0], which has been
resolved and backported by GCC-12.1.0[1] and GCC-11.3.0[2].
So fix this by change the GCC version in
CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC to GCC-11.3.0.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f0bae2552db1dd4f1995608fbf6648fcee4e9e0c [0]
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ca2bbb88f999f4d3cc40e89bc1aba712505dd598 [1]
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d29f5d6ab513c52fd872f532c492e35ae9fd6671 [2]
Fixes: ca09f772ccca ("riscv: Handle zicsr/zifencei issue between gcc and binutils")
Reported-by: Conor Dooley <[email protected]>
Cc: <[email protected]>
Signed-off-by: Mingzheng Xing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Closes: https://lore.kernel.org/all/20230823-captive-abdomen-befd942a4a73@wendy/
Reviewed-by: Conor Dooley <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A samsung-dsim initialization fix, a devfreq fix for panfrost, a DP DSC
define fix, a recursive lock fix for dma-buf, a shader validation fix
and a reference counting fix for vmwgfx
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/amy26vu5xbeeikswpx7nt6rddwfocdidshrtt2qovipihx5poj@y45p3dtzrloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi, can and netfilter.
Fixes to fixes:
- nf_tables:
- GC transaction race with abort path
- defer gc run if previous batch is still pending
Previous releases - regressions:
- ipv4: fix data-races around inet->inet_id
- phy: fix deadlocking in phy_error() invocation
- mdio: fix C45 read/write protocol
- ipvlan: fix a reference count leak warning in ipvlan_ns_exit()
- ice: fix NULL pointer deref during VF reset
- i40e: fix potential NULL pointer dereferencing of pf->vf in
i40e_sync_vsi_filters()
- tg3: use slab_build_skb() when needed
- mtk_eth_soc: fix NULL pointer on hw reset
Previous releases - always broken:
- core: validate veth and vxcan peer ifindexes
- sched: fix a qdisc modification with ambiguous command request
- devlink: add missing unregister linecard notification
- wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
- batman:
- do not get eth header before batadv_check_management_packet
- fix batadv_v_ogm_aggr_send memory leak
- bonding: fix macvlan over alb bond support
- mlxsw: set time stamp fields also when its type is MIRROR_UTC"
* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
selftests: bonding: add macvlan over bond testing
selftest: bond: add new topo bond_topo_2d1c.sh
bonding: fix macvlan over alb bond support
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
ibmveth: Use dcbf rather than dcbfl
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
net/sched: fix a qdisc modification with ambiguous command request
igc: Fix the typo in the PTM Control macro
batman-adv: Hold rtnl lock during MTU update via netlink
igb: Avoid starting unnecessary workqueues
can: raw: add missing refcount for memory leak fix
can: isotp: fix support for transmission of SF without flow control
bnx2x: new flag for track HW resource allocation
sfc: allocate a big enough SKB for loopback selftest packet
...
|
|
The fixed commit erroneously removed a call to nfsd_end_grace(),
which makes calls to write_v4_end_grace() a no-op.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Fixes: 39d432fc7630 ("NFSD: trace nfsctl operations")
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
As following backtrace, the struct file_lock request , in posix_lock_inode
is free before ftrace function using.
Replace the ftrace function ahead free flow could fix the use-after-free
issue.
[name:report&]===============================================
BUG:KASAN: use-after-free in trace_event_raw_event_filelock_lock+0x80/0x12c
[name:report&]Read at addr f6ffff8025622620 by task NativeThread/16753
[name:report_hw_tags&]Pointer tag: [f6], memory tag: [fe]
[name:report&]
BT:
Hardware name: MT6897 (DT)
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
print_report+0x2c8/0xa08
kasan_report+0xb0/0x120
__do_kernel_fault+0xc8/0x248
do_bad_area+0x30/0xdc
do_tag_check_fault+0x1c/0x30
do_mem_abort+0x58/0xbc
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
trace_event_raw_event_filelock_lock+0x80/0x12c
posix_lock_inode+0xd0c/0xd60
do_lock_file_wait+0xb8/0x190
fcntl_setlk+0x2d8/0x440
...
[name:report&]
[name:report&]Allocated by task 16752:
...
slab_post_alloc_hook+0x74/0x340
kmem_cache_alloc+0x1b0/0x2f0
posix_lock_inode+0xb0/0xd60
...
[name:report&]
[name:report&]Freed by task 16752:
...
kmem_cache_free+0x274/0x5b0
locks_dispose_list+0x3c/0x148
posix_lock_inode+0xc40/0xd60
do_lock_file_wait+0xb8/0x190
fcntl_setlk+0x2d8/0x440
do_fcntl+0x150/0xc18
...
Signed-off-by: Will Shiu <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Signed-off-by: Jakub Wilk <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Test the basic locking stuff on 2 fds: multiple read locks,
conflicts between read and write locks, use of len==0 for queries.
Also tests for F_UNLCK F_OFD_GETLK extension.
[ jlayton: fix unlink() pathname in selftest ]
Cc: Jeff Layton <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stas Sergeev <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
|
|
Lenovo 82SJ doesn't have DMIC connected like 82V2 does. Narrow
the match down to only cover 82V2.
Reported-by: [email protected]
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063
Fixes: 2232b2dd8cd4 ("ASoC: amd: yc: Add Lenovo Yoga Slim 7 Pro X to quirks table")
Signed-off-by: Mario Limonciello <[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]
|
|
preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.
Fixes: 2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
Signed-off-by: Mikel Rychliski <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
arch_cpu_finalize_init
identify_boot_cpu
identify_cpu
generic_identify
get_cpu_cap --> setup cpu capability
...
fpu__init_cpu
fpu__init_cpu_xstate
cr4_set_bits(X86_CR4_OSXSAVE);
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]
|
|
The thread flag TIF_NEED_FPU_LOAD indicates that the FPU saved state is
valid and should be reloaded when returning to userspace. However, the
kernel will skip doing this if the FPU registers are already valid as
determined by fpregs_state_valid(). The logic embedded there considers
the state valid if two cases are both true:
1: fpu_fpregs_owner_ctx points to the current tasks FPU state
2: the last CPU the registers were live in was the current CPU.
This is usually correct logic. A CPU’s fpu_fpregs_owner_ctx is set to
the current FPU during the fpregs_restore_userregs() operation, so it
indicates that the registers have been restored on this CPU. But this
alone doesn’t preclude that the task hasn’t been rescheduled to a
different CPU, where the registers were modified, and then back to the
current CPU. To verify that this was not the case the logic relies on the
second condition. So the assumption is that if the registers have been
restored, AND they haven’t had the chance to be modified (by being
loaded on another CPU), then they MUST be valid on the current CPU.
Besides the lazy FPU optimizations, the other cases where the FPU
registers might not be valid are when the kernel modifies the FPU register
state or the FPU saved buffer. In this case the operation modifying the
FPU state needs to let the kernel know the correspondence has been
broken. The comment in “arch/x86/kernel/fpu/context.h” has:
/*
...
* If the FPU register state is valid, the kernel can skip restoring the
* FPU state from memory.
*
* Any code that clobbers the FPU registers or updates the in-memory
* FPU state for a task MUST let the rest of the kernel know that the
* FPU registers are no longer valid for this task.
*
* Either one of these invalidation functions is enough. Invalidate
* a resource you control: CPU if using the CPU for something else
* (with preemption disabled), FPU for the current task, or a task that
* is prevented from running by the current task.
*/
However, this is not completely true. When the kernel modifies the
registers or saved FPU state, it can only rely on
__fpu_invalidate_fpregs_state(), which wipes the FPU’s last_cpu
tracking. The exec path instead relies on fpregs_deactivate(), which sets
the CPU’s FPU context to NULL. This was observed to fail to restore the
reset FPU state to the registers when returning to userspace in the
following scenario:
1. A task is executing in userspace on CPU0
- CPU0’s FPU context points to tasks
- fpu->last_cpu=CPU0
2. The task exec()’s
3. While in the kernel the task is preempted
- CPU0 gets a thread executing in the kernel (such that no other
FPU context is activated)
- Scheduler sets task’s fpu->last_cpu=CPU0 when scheduling out
4. Task is migrated to CPU1
5. Continuing the exec(), the task gets to
fpu_flush_thread()->fpu_reset_fpregs()
- Sets CPU1’s fpu context to NULL
- Copies the init state to the task’s FPU buffer
- Sets TIF_NEED_FPU_LOAD on the task
6. The task reschedules back to CPU0 before completing the exec() and
returning to userspace
- During the reschedule, scheduler finds TIF_NEED_FPU_LOAD is set
- Skips saving the registers and updating task’s fpu→last_cpu,
because TIF_NEED_FPU_LOAD is the canonical source.
7. Now CPU0’s FPU context is still pointing to the task’s, and
fpu->last_cpu is still CPU0. So fpregs_state_valid() returns true even
though the reset FPU state has not been restored.
So the root cause is that exec() is doing the wrong kind of invalidate. It
should reset fpu->last_cpu via __fpu_invalidate_fpregs_state(). Further,
fpu__drop() doesn't really seem appropriate as the task (and FPU) are not
going away, they are just getting reset as part of an exec. So switch to
__fpu_invalidate_fpregs_state().
Also, delete the misleading comment that says that either kind of
invalidate will be enough, because it’s not always the case.
Fixes: 33344368cb08 ("x86/fpu: Clean up the fpu__clear() variants")
Reported-by: Lei Wang <[email protected]>
Signed-off-by: Rick Edgecombe <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Lijun Pan <[email protected]>
Reviewed-by: Sohil Mehta <[email protected]>
Acked-by: Lijun Pan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Hangbin Liu says:
====================
fix macvlan over alb bond support
Currently, the macvlan over alb bond is broken after commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: [email protected]
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: [email protected]
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A relatively large but generally not super urgent set of fixes for ASoC,
including some quirks and a MAINTAINERS update. There's also an update
to cs35l56 to change the firmware ABI, there are no current shipping
systems which use the current interface and the sooner we get the new
interface in the less likely it is that something will start.
It'd be nice if these landed for v6.5 but not the end of the world if
they wait till v6.6.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
|
|
After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).
After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.
Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
CC: [email protected] # 6.4+
Cc: Dmitry Baryshkov <[email protected]>
Cc: [email protected]
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: [email protected] # 6.4+
Cc: Dmitry Baryshkov <[email protected]>
Cc: [email protected]
Reviewed-by: Jouni Högander <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Andy Chiu <[email protected]> says:
We add a vlenb field in Vector context and save it with the
riscv_vstate_save() macro. It should not cause performance regression as
VLENB is a design-time constant and is frequently used by hardware.
Also, adding this field into the __sc_riscv_v_state may benifit us on a
future compatibility issue becuse a hardware may have writable VLENB.
Adding and saving VLENB have an immediate benifit as it gives ptrace a
better view of the Vector extension and makes it possible to reconstruct
Vector register files from the dump without doing an additional csr read.
This patchset also sync the number of note types between us and gdb for
riscv to solve a conflicting note.
This is not an ABI break given that 6.5 has not been released yet.
* b4-shazam-merge:
RISC-V: vector: export VLENB csr in __sc_riscv_v_state
RISC-V: Remove ptrace support for vectors
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|