| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With two Msgs, msgA and msgB and a user doing nonblocking sendmsg calls (or
multiple cores) on a single socket 'sk' we could get the following flow.
msgA, sk msgB, sk
----------- ---------------
tcp_bpf_sendmsg()
lock(sk)
psock = sk->psock
tcp_bpf_sendmsg()
lock(sk) ... blocking
tcp_bpf_send_verdict
if (psock->eval == NONE)
psock->eval = sk_psock_msg_verdict
..
< handle SK_REDIRECT case >
release_sock(sk) < lock dropped so grab here >
ret = tcp_bpf_sendmsg_redir
psock = sk->psock
tcp_bpf_send_verdict
lock_sock(sk) ... blocking on B
if (psock->eval == NONE) <- boom.
psock->eval will have msgA state
The problem here is we dropped the lock on msgA and grabbed it with msgB.
Now we have old state in psock and importantly psock->eval has not been
cleared. So msgB will run whatever action was done on A and the verdict
program may never see it.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fixes screen orientation for GPD Win 3 handheld gaming console.
Signed-off-by: Mario Risoldi <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
TI's implementation does not service the watchdog even if the kernel
command line parameter omap_wdt.early_enable is set to 1. This patch
fixes the issue.
Signed-off-by: Walter Stoll <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
sparse reports the following address space warning.
drivers/watchdog/ixp4xx_wdt.c:122:20: sparse:
incorrect type in assignment (different address spaces)
drivers/watchdog/ixp4xx_wdt.c:122:20: sparse:
expected void [noderef] __iomem *base
drivers/watchdog/ixp4xx_wdt.c:122:20: sparse:
got void *platform_data
Add a typecast to solve the problem.
Fixes: 21a0a29d16c6 ("watchdog: ixp4xx: Rewrite driver to use core")
Cc: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
SBSA says of the generic watchdog:
All registers are 32 bits in size and should be accessed using 32-bit
reads and writes. If an access size other than 32 bits is used then
the results are IMPLEMENTATION DEFINED.
and for qemu, the implementation will only allow 32-bit accesses
resulting in a synchronous external abort when configuring the watchdog.
Use lo_hi_* accessors rather than a readq/writeq.
Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
Signed-off-by: Jamie Iles <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Shaokun Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
This reverts commit cb011044e34c ("watchdog: iTCO_wdt: Account for
rebooting on second timeout") and commit aec42642d91f ("watchdog: iTCO_wdt:
Fix detection of SMI-off case") since those patches cause a regression
on certain boards (https://bugzilla.kernel.org/show_bug.cgi?id=213809).
While this revert may result in some boards to only reset after twice
the configured timeout value, that is still better than a watchdog reset
after half the configured value.
Fixes: cb011044e34c ("watchdog: iTCO_wdt: Account for rebooting on second timeout")
Fixes: aec42642d91f ("watchdog: iTCO_wdt: Fix detection of SMI-off case")
Cc: Jan Kiszka <[email protected]>
Cc: Mantas Mikulėnas <[email protected]>
Reported-by: Javier S. Pedro <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush
cache) and disable cqe, for resume back, we enable CQE and not clear HALT
state.
In this case MediaTek mmc host controller will keep the value for HALT
state after CQE disable/enable flow, so the next CQE transfer after resume
will be timeout due to CQE is in HALT state, the log as below:
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config: 0x00001103 | Control: 0x00000001
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base: 0xfd05f000 | TDL up32: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell: 0x8000203c | TCN: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP: 0x00000000 | CRNQDUN: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS: 0x00000000 | CRNQIE: 0x00000000
This change check HALT state after CQE enable, if CQE is in HALT state, we
will clear it.
Signed-off-by: Wenbin Mei <[email protected]>
Cc: [email protected]
Acked-by: Adrian Hunter <[email protected]>
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: [email protected] # 3.0
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Even though there are candiates value if can't find best value, it's
returned -EIO. It's not proper behavior.
If there is not best value, use a first candiate value to work eMMC.
Signed-off-by: Jaehoon Chung <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Tested-by: Christian Hewitt <[email protected]>
Cc: [email protected]
Fixes: c537a1c5ff63 ("mmc: dw_mmc: exynos: add variable delay tuning sequence")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Add maintainers for DH electronics DHCOM i.MX6
and DHCOM/DHCOR STM32MP1 boards.
Signed-off-by: Christoph Niedermaier <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]'
To: [email protected]
To: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Before removing disk from sysfs, userspace still may change queue via
sysfs, such as switching elevator or setting wbt latency, both may
reinitialize wbt, then the warning in blk_free_queue_stats() will be
triggered since rq_qos_exit() is moved to del_gendisk().
Fixes the issue by moving draining queue & tearing down after disk is
removed from sysfs, at that time no one can come into queue's
store()/show().
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS one more fix for 5.15
This reverts a clock change in the Qualcomm RB5 devicetree which in some
combinations of firmware and configuration causes the device to crash
during boot.
Data on an adjacent platform indicates that this is probably not be the
root cause of the problem, but this resolves the regression seen on RB5
and will allow the SM8250 platform to boot v5.15.
* tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Signed-off-by: Vadym Kochan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in lan78xx_tx_bh() in case a malicious device has
broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: [email protected] # 4.3
Cc: [email protected] <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was
in wrong error handling in batadv_mesh_init().
Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case
of any batadv_*_init() calls failure. This approach may work well, when
there is some kind of indicator, which can tell which parts of batadv are
initialized; but there isn't any.
All written above lead to cleaning up uninitialized fields. Even if we hide
ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit
GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1]
To fix these bugs we can unwind batadv_*_init() calls one by one.
It is good approach for 2 reasons: 1) It fixes bugs on error handling
path 2) It improves the performance, since we won't call unneeded
batadv_*_free() functions.
So, this patch makes all batadv_*_init() clean up all allocated memory
before returning with an error to no call correspoing batadv_*_free()
and open-codes batadv_mesh_free() with proper order to avoid touching
uninitialized fields.
Link: https://lore.kernel.org/netdev/[email protected]/ [1]
Reported-and-tested-by: [email protected]
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Pavel Skripkin <[email protected]>
Acked-by: Sven Eckelmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The function tipc_crypto_key_rcv is used to parse MSG_CRYPTO messages
to receive keys from other nodes in the cluster in order to decrypt any
further messages from them.
This patch verifies that any supplied sizes in the message body are
valid for the received message.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Signed-off-by: Max VA <[email protected]>
Acked-by: Ying Xue <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
During probing, the driver tries to get a list (mask) of supported
command types in port100_get_command_type_mask() function. The value
is u64 and 0 is treated as invalid mask (no commands supported). The
function however returns also -ERRNO as u64 which will be interpret as
valid command mask.
Return 0 on every error case of port100_get_command_type_mask(), so the
probing will stop.
Cc: <[email protected]>
Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-10-25
This series contains updates to ice driver only.
Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from
link aggregate.
Yongxin Liu adds a check for PTP support during release which would
cause a call trace on non-PTP supported devices.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
During a testing of an user-space application which transmits UDP
multicast datagrams and utilizes multicast routing to send the UDP
datagrams out of defined network interfaces, I've found a multicast
router does not fill-in UDP checksum into locally produced, looped-back
and forwarded UDP datagrams, if an original output NIC the datagrams
are sent to has UDP TX checksum offload enabled.
The datagrams are sent malformed out of the NIC the datagrams have been
forwarded to.
It is because:
1. If TX checksum offload is enabled on the output NIC, UDP checksum
is not calculated by kernel and is not filled into skb data.
2. dev_loopback_xmit(), which is called solely by
ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY
unconditionally.
3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except
CHECKSUM_COMPLETE"), the ip_summed value is preserved during
forwarding.
4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during
a packet egress.
The minimum fix in dev_loopback_xmit():
1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the
case when the original output NIC has TX checksum offload enabled.
The effects are:
a) If the forwarding destination interface supports TX checksum
offloading, the NIC driver is responsible to fill-in the
checksum.
b) If the forwarding destination interface does NOT support TX
checksum offloading, checksums are filled-in by kernel before
skb is submitted to the NIC driver.
c) For local delivery, checksum validation is skipped as in the
case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary().
2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It
means, for CHECKSUM_NONE, the behavior is unmodified and is there
to skip a looped-back packet local delivery checksum validation.
Signed-off-by: Cyril Strejc <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are missing braces in the function that verify controller parameters,
then an error is always returned when the parameter to select Microwire
frames operation is used on devices allowing it.
Signed-off-by: Thomas Perrot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We should not access request members after the last send, even to
determine if indeed it was the last data payload send. The reason is
that a completion could have arrived and trigger a new execution of the
request which overridden these members. This was fixed by commit
825619b09ad3 ("nvme-tcp: fix possible use-after-completion").
Commit e371af033c56 broke that assumption again to address cases where
multiple r2t pdus are sent per request. To fix it, we need to record the
request data_sent and data_len and after the payload network send we
reference these counters to determine weather we should advance the
request iterator.
Fixes: e371af033c56 ("nvme-tcp: fix incorrect h2cdata pdu offset accounting")
Reported-by: Keith Busch <[email protected]>
Cc: [email protected] # 5.10+
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
page_frag_free() won't completely release the memory
allocated for the commands, the cache page must be explicitly
freed by calling __page_frag_cache_drain().
This bug can be easily reproduced by repeatedly
executing the following command on the initiator:
$echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: John Meneghini <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Reading out the DP encoders' DPCD during booting or resume is only
required for enabled encoders: such encoders may be modesetted during
the initial commit and the link training this involves depends on an
initialized DPCD. For DDI encoders reading out the DPCD is skipped, do
the same on pre-DDI platforms.
Atm, the first DPCD readout without a sink connected - which is a likely
scneario if the encoder is disabled - leaves intel_dp->num_common_rates
at 0, which resulted in
intel_dp_sync_state()->intel_dp_max_common_rate()
in a
intel_dp->common_rates[-1]
access. This by definition results in an undefined behaviour, though to
my best knowledge in all HW/compiler configurations it actually results
in accessing the array item type value preceding the array. In this
case the preceding value happens to be intel_dp->num_common_rates,
which is 0, so this issue - by luck - didn't cause a user visible
problem.
Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN
builds leads to a kernel BUG() (which revealed this problem for us),
hence CC:stable.
A related problem in case the encoder is enabled but the sink is not
connected or the DPCD readout fails is fixed by the next patch.
v2: Amend the commit message describing the root cause of the
CONFIG_UBSAN BUG().
Fixes: a532cde31de3 ("drm/i915/tc: Fix TypeC port init/resume time sanitization")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Reported-and-tested-by: Mat Jonczyk <[email protected]>
Cc: Mat Jonczyk <[email protected]>
Cc: José Roberto de Souza <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4ec5ffc341cecbea060739aea1d53398ac2ec3f8)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.
This time no justification is given for the clflush in the
offending commit.
Cc: [email protected]
Cc: Maarten Lankhorst <[email protected]>
Cc: Thomas Hellström <[email protected]>
Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dave Airlie <[email protected]>
(cherry picked from commit 9ced12182d0d8401d821e9602e56e276459900fc)
Signed-off-by: Jani Nikula <[email protected]>
|
|
This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.
Cc: [email protected]
Cc: Maarten Lankhorst <[email protected]>
Cc: Thomas Hellström <[email protected]> #v1
Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dave Airlie <[email protected]>
(cherry picked from commit af7b6d234eefa30c461cc16912bafb32b9e6141c)
Signed-off-by: Jani Nikula <[email protected]>
|
|
When the driver fails to allocate a new Rx buffer, it passes an empty Rx
descriptor (contains zero address and size) to the device and marks it
as invalid by setting the skb pointer in the descriptor's metadata to
NULL.
After processing enough Rx descriptors, the driver will try to process
the invalid descriptor, but will return immediately seeing that the skb
pointer is NULL. Since the driver no longer passes new Rx descriptors to
the device, the Rx queue will eventually become full and the device will
start to drop packets.
Fix this by recycling the received packet if allocation of the new
packet failed. This means that allocation is no longer performed at the
end of the Rx routine, but at the start, before tearing down the DMA
mapping of the received packet.
Remove the comment about the descriptor being zeroed as it is no longer
correct. This is OK because we either use the descriptor as-is (when
recycling) or overwrite its address and size fields with that of the
newly allocated Rx buffer.
The issue was discovered when a process ("perf") consumed too much
memory and put the system under memory pressure. It can be reproduced by
injecting slab allocation failures [1]. After the fix, the Rx queue no
longer comes to a halt.
[1]
# echo 10 > /sys/kernel/debug/failslab/times
# echo 1000 > /sys/kernel/debug/failslab/interval
# echo 100 > /sys/kernel/debug/failslab/probability
FAULT_INJECTION: forcing a failure.
name failslab, interval 1000, probability 100, space 0, times 8
[...]
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
should_fail.cold+0x32/0x37
should_failslab+0x5/0x10
kmem_cache_alloc_node+0x23/0x190
__alloc_skb+0x1f9/0x280
__netdev_alloc_skb+0x3a/0x150
mlxsw_pci_rdq_skb_alloc+0x24/0x90
mlxsw_pci_cq_tasklet+0x3dc/0x1200
tasklet_action_common.constprop.0+0x9f/0x100
__do_softirq+0xb5/0x252
irq_exit_rcu+0x7a/0xa0
common_interrupt+0x83/0xa0
</IRQ>
asm_common_interrupt+0x1e/0x40
RIP: 0010:cpuidle_enter_state+0xc8/0x340
[...]
mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ
Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Originally all DAX access when through block_device operations and thus
needed a queue reference. But since commit cccbce671582
("filesystem-dax: convert to dax_direct_access()") all this happens at
the DAX device level which uses its own refcounting. Having the external
refcount thus wasn't needed but has otherwise been harmless for long
time.
But now that "block: drain file system I/O on del_gendisk" waits for
q_usage_count to reach 0 in del_gendisk this whole scheme can't work
anymore (and pmem is the only driver abusing q_usage_count like that).
So switch to the internal reference and remove the unbalanced
blk_freeze_queue_start that is taken care of by del_gendisk.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Yi Zhang <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
PTP is currently only supported on E810 devices, it is checked
in ice_ptp_init(). However, there is no check in ice_ptp_release().
For other E800 series devices, ice_ptp_release() will be wrongly executed.
Fix the following calltrace.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: ice ice_service_task [ice]
Call Trace:
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
register_lock_class+0x495/0x4a0
? find_held_lock+0x3c/0xb0
__lock_acquire+0x71/0x1830
lock_acquire+0x1e6/0x330
? ice_ptp_release+0x3c/0x1e0 [ice]
? _raw_spin_lock+0x19/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
_raw_spin_lock+0x38/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
ice_ptp_release+0x3c/0x1e0 [ice]
ice_prepare_for_reset+0xcb/0xe0 [ice]
ice_do_reset+0x38/0x110 [ice]
ice_service_task+0x138/0xf10 [ice]
? __this_cpu_preempt_check+0x13/0x20
process_one_work+0x26a/0x650
worker_thread+0x3f/0x3b0
? __kthread_parkme+0x51/0xb0
? process_one_work+0x650/0x650
kthread+0x161/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush")
Signed-off-by: Yongxin Liu <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Gurucharan G <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
When the PF is a member of a link aggregate, and the driver
is removed, the process will hang unless we respond to the
NETDEV_UNREGISTER event that is sent to the event_handler
for LAG.
Add a case statement for the ice_lag_event_handler to unlink
the PF from the link aggregate.
Also remove code that was incorrectly applying a dev_hold to
peer_netdevs that were associated with the ice driver.
Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG")
Signed-off-by: Dave Ertman <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
sm8250 target"
This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4.
This upstream commit broke AOSP (post Android 12 merge) build
on RB5. The device either silently crashes into USB crash mode
after android boot animation or we see a blank blue screen
with following dpu errors in dmesg:
[ T444] hw recovery is not complete for ctl:3
[ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
[ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target")
Signed-off-by: Amit Pundir <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
|
|
Commit 110860541f44 ("mm/secretmem: use refcount_t instead of atomic_t")
attempted to fix the problem of secretmem_users wrapping to zero and
allowing suspend once again.
But it was reverted in commit 87066fdd2e30 ("Revert 'mm/secretmem: use
refcount_t instead of atomic_t'") because of the problems it caused - a
refcount_t was not semantically the right type to use.
Instead prevent secretmem_users from wrapping to zero by forbidding new
users if the number of users has wrapped from positive to negative.
This stops a long way short of reaching the necessary 4 billion users
where it wraps to zero again, so there's no need to be clever with
special anti-wrap types or checking the return value from atomic_inc().
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Jordy Zomer <[email protected]>
Cc: Kees Cook <[email protected]>,
Cc: James Bottomley <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit efafec27c565 ("spi: Fix tegra20 build with CONFIG_PM=n") already
fixed the build without PM support once. There was an alternative fix
by Guenter in commit 2bab94090b01 ("spi: tegra20-slink: Declare runtime
suspend and resume functions conditionally"), and Mark then merged the
two correctly in ffb1e76f4f32 ("Merge tag 'v5.15-rc2' into spi-5.15").
But for some inexplicable reason, Mark then merged things _again_ in
commit 59c4e190b10c ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed
things up at that point, and the __maybe_unused attribute on
tegra_slink_runtime_resume() went missing.
Reinstate it, so that alpha (and other architectures without PM support)
builds cleanly again.
Btw, this is another prime example of how random back-merges are not
good. Just don't do them. Subsystem developers should not merge my
tree in any normal circumstances. Both of those merge commits pointed
to above are bad: even the one that got the merge result right doesn't
even mention _why_ it was done, and the one that got it wrong is
obviously broken.
Reported-by: Guenter Roeck <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull ARM fixes from Russell King:
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S
ARM: 9141/1: only warn about XIP address when not compile testing
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 9138/1: fix link warning with XIP + frame-pointer
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
ARM: 9125/1: fix incorrect use of get_kernel_nofault()
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"A single fix in this pull request addressing an invalid error code
return in the sata_mv driver (from Zheyu)"
* tag 'libata-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: sata_mv: Fix the error handling of mv_chip_id()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some late pin control fixes, the most generally annoying will probably
be the AMD IRQ storm fix affecting the Microsoft surface.
Summary:
- Three fixes pertaining to Broadcom DT bindings. Some stuff didn't
work out as inteded, we need to back out
- A resume bug fix in the STM32 driver
- Disable and mask the interrupts on probe in the AMD pinctrl driver,
affecting Microsoft surface"
* tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: disable and mask interrupts on probe
pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()
Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"
dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example
Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
|
|
Currently in net_ns_get_ownership() it may not be able to set uid or gid
if make_kuid or make_kgid returns an invalid value, and an uninit-value
issue can be triggered by this.
This patch is to fix it by initializing the uid and gid before calling
net_ns_get_ownership(), as it does in kobject_get_ownership()
Fixes: e6dee9f3893c ("net-sysfs: add netdev_change_owner()")
Reported-by: Paolo Abeni <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The tx queues are not stopped during the live migration. As a result, the
ndo_start_xmit() may access netfront_info->queues which is freed by
talk_to_netback()->xennet_destroy_queues().
This patch is to netif_device_detach() at the beginning of xen-netfront
resuming, and netif_device_attach() at the end of resuming.
CPU A CPU B
talk_to_netback()
-> if (info->queues)
xennet_destroy_queues(info);
to free netfront_info->queues
xennet_start_xmit()
to access netfront_info->queues
-> err = xennet_create_queues(info, &num_queues);
The idea is borrowed from virtio-net.
Cc: Joe Jin <[email protected]>
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Drivers call netdev_set_num_tc() and then netdev_set_tc_queue()
to set the queue count and offset for each TC. So the queue count
and offset for the TCs may be zero for a short period after dev->num_tc
has been set. If a TX packet is being transmitted at this time in the
code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see
nonzero dev->num_tc but zero qcount for the TC. The while loop that
keeps looping while hash >= qcount will not end.
Fix it by checking the TC's qcount to be nonzero before using it.
Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When copying the device name, the length of the data memcpy copied exceeds
the length of the source buffer, which cause the KASAN issue below. Use
strscpy_pad() instead.
BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
Read of size 64 at addr ffff88811a10f5e0 by task rping/140263
CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1d/0xa0
kasan_report+0xcb/0x110
kasan_check_range+0x13d/0x180
memcpy+0x20/0x60
ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
ib_nl_make_request+0x1c6/0x380 [ib_core]
send_mad+0x20a/0x220 [ib_core]
ib_sa_path_rec_get+0x3e3/0x800 [ib_core]
cma_query_ib_route+0x29b/0x390 [rdma_cm]
rdma_resolve_route+0x308/0x3e0 [rdma_cm]
ucma_resolve_route+0xe1/0x150 [rdma_ucm]
ucma_write+0x17b/0x1f0 [rdma_ucm]
vfs_write+0x142/0x4d0
ksys_write+0x133/0x160
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f26499aa90f
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48
RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f
RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003
RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00
R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810
Allocated by task 131419:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
proc_self_get_link+0x8b/0x100
pick_link+0x4f1/0x5c0
step_into+0x2eb/0x3d0
walk_component+0xc8/0x2c0
link_path_walk+0x3b8/0x580
path_openat+0x101/0x230
do_filp_open+0x12e/0x240
do_sys_openat2+0x115/0x280
__x64_sys_openat+0xce/0x140
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink")
Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
A hard hang is observed whenever the ethernet interface is brought
down. If the PHY is stopped before the LPC core block is reset,
the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I
re-arranged the ordering of the functions calls in lpc_eth_close() to
reset the hardware before stopping the PHY.
Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Trevor Woerner <[email protected]>
Acked-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Without the patch we fail:
$ sudo brctl addbr br0
$ sudo brctl addif br0 wlp1s0
$ sudo iw wlp1s0 set 4addr on
command failed: Device or resource busy (-16)
Last command failed but iface was already in 4addr mode.
Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces")
Signed-off-by: Janusz Dziedzic <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[add fixes tag, fix indentation, edit commit log]
Signed-off-by: Johannes Berg <[email protected]>
|
|
The management registrations locking was broken, the list was
locked for each wdev, but cfg80211_mgmt_registrations_update()
iterated it without holding all the correct spinlocks, causing
list corruption.
Rather than trying to fix it with fine-grained locking, just
move the lock to the wiphy/rdev (still need the list on each
wdev), we already need to hold the wdev lock to change it, so
there's no contention on the lock in any case. This trivially
fixes the bug since we hold one wdev's lock already, and now
will hold the lock that protects all lists.
Cc: [email protected]
Reported-by: Jouni Malinen <[email protected]>
Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API")
Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In kvm_vcpu_block, the current task is set to TASK_INTERRUPTIBLE before
making a final check whether the vCPU should be woken from HLT by any
incoming interrupt.
This is a problem for the get_user() in __kvm_xen_has_interrupt(), which
really shouldn't be sleeping when the task state has already been set.
I think it's actually harmless as it would just manifest itself as a
spurious wakeup, but it's causing a debug warning:
[ 230.963649] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b6bcdbc9>] prepare_to_swait_exclusive+0x30/0x80
Fix the warning by turning it into an *explicit* spurious wakeup. When
invoked with !task_is_running(current) (and we might as well add
in_atomic() there while we're at it), just return 1 to indicate that
an IRQ is pending, which will cause a wakeup and then something will
call it again in a context that *can* sleep so it can fault the page
back in.
Cc: [email protected]
Fixes: 40da8ccd724f ("KVM: x86/xen: Add event channel interrupt vector upcall")
Signed-off-by: David Woodhouse <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for interrupt delivery
Two bugs that might result in CPUs not woken up when interrupts are
pending.
|
|
Andrew Lunn says:
====================
ksettings_{get|set} lock fixes
Walter Stoll <[email protected]> reported a race condition
between "ethtool -s eth0 speed 100 duplex full autoneg off" and phylib
reading the current status from the PHY. Both ksetting_get and
ksetting_set fail the take the phydev mutex, and as a result, there is
a small window of time where the phydev members are not self
consistent.
Patch 1 fixes phy_ethtool_ksettings_get by adding the needed lock.
Patches 2 and 3 move code around and perform to refactoring, to allow
patch 4 to fix phy_ethtool_ksettings_set by added the lock.
Thanks go to Walter for the detailed origional report, suggested fix,
and testing of the proposed patches.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
There is a race condition where the PHY state machine can change
members of the phydev structure at the same time userspace requests a
change via ethtool. To prevent this, have phy_ethtool_ksettings_set
take the PHY lock.
Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Reported-by: Walter Stoll <[email protected]>
Suggested-by: Walter Stoll <[email protected]>
Tested-by: Walter Stoll <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Split phy_start_aneg into a wrapper which takes the PHY lock, and a
helper doing the real work. This will be needed when
phy_ethtook_ksettings_set takes the lock.
Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This allows it to make use of a helper which assume the PHY is already
locked.
Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|