aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-22drm/ttm: Fix an invalid freeing on already freed page in error pathThomas Hellström1-1/+1
If caching mode change fails due to, for example, OOM we free the allocated pages in a two-step process. First the pages for which the caching change has already succeeded. Secondly the pages for which a caching change did not succeed. However the second step was incorrectly freeing the pages already freed in the first step. Fix. Signed-off-by: Thomas Hellström <[email protected]> Fixes: 379989e7cbdc ("drm/ttm/pool: Fix ttm_pool_alloc error path") Cc: Christian König <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Christian Koenig <[email protected]> Cc: Huang Rui <[email protected]> Cc: [email protected] Cc: <[email protected]> # v6.4+ Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-22ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodesGeert Uytterhoeven8-0/+8
make dtbs_check W=2: arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider ... Fix this by adding the missing #interrupt-cells properties. Reported-by: Rob Herring <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
2024-02-22l2tp: pass correct message length to ip6_append_dataTom Parkin1-1/+1
l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent. Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells <[email protected]> Cc: [email protected] Signed-off-by: Tom Parkin <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Merge tag 'nf-24-02-22' of ↵Paolo Abeni3-43/+57
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) If user requests to wake up a table and hook fails, restore the dormant flag from the error path, from Florian Westphal. 2) Reset dst after transferring it to the flow object, otherwise dst gets released twice from the error path. 3) Release dst in case the flowtable selects a direct xmit path, eg. transmission to bridge port. Otherwise, dst is memleaked. 4) Register basechain and flowtable hooks at the end of the command. Error path releases these datastructure without waiting for the rcu grace period. 5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report on access to hook type, also from Florian Westphal. netfilter pull request 24-02-22 * tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: use kzalloc for hook allocation netfilter: nf_tables: register hooks last when adding new chain/flowtable netfilter: nft_flow_offload: release dst in case direct xmit path is used netfilter: nft_flow_offload: reset dst in route object after setting up flow netfilter: nf_tables: set dormant flag on hook register failure ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Merge tag 'for-netdev' of ↵Paolo Abeni15-17/+217
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-02-22 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 24 day(s) which contain a total of 15 files changed, 217 insertions(+), 17 deletions(-). The main changes are: 1) Fix a syzkaller-triggered oops when attempting to read the vsyscall page through bpf_probe_read_kernel and friends, from Hou Tao. 2) Fix a kernel panic due to uninitialized iter position pointer in bpf_iter_task, from Yafang Shao. 3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel, from Martin KaFai Lau. 4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET) due to incorrect truesize accounting, from Sebastian Andrzej Siewior. 5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready, from Shigeru Yoshida. 6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be resolved, from Hari Bathini. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() selftests/bpf: Add negtive test cases for task iter bpf: Fix an issue due to uninitialized bpf_iter_task selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel selftest/bpf: Test the read of vsyscall page under x86-64 x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault() x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h bpf, scripts: Correct GPL license name xsk: Add truesize to skb_add_rx_frag(). bpf: Fix warning for bpf_cpumask in verifier ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHYSiddharth Vadapalli1-1/+3
Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Merge branch 'ioam6-fix-write-to-cloned-skb-s'Paolo Abeni3-67/+76
Justin Iurman says: ==================== ioam6: fix write to cloned skb's Make sure the IOAM data insertion is not applied on cloned skb's. As a consequence, ioam selftests needed a refactoring. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22selftests: ioam: refactoring to align with the fixJustin Iurman2-67/+66
ioam6_parser uses a packet socket. After the fix to prevent writing to cloned skb's, the receiver does not see its IOAM data anymore, which makes input/forward ioam-selftests to fail. As a workaround, ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to get hop-by-hop options. As a consequence, the hook is "after" the IOAM data insertion by the receiver and all tests are working again. Signed-off-by: Justin Iurman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Fix write to cloned skb in ipv6_hop_ioam()Justin Iurman1-0/+10
ioam6_fill_trace_data() writes inside the skb payload without ensuring it's writeable (e.g., not cloned). This function is called both from the input and output path. The output path (ioam6_iptunnel) already does the check. This commit provides a fix for the input path, inside ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network header pointer ("nh") when returning from ipv6_hop_ioam(). Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Justin Iurman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22phonet/pep: fix racy skb_queue_empty() useRémi Denis-Courmont1-9/+32
The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer. Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Signed-off-by: Rémi Denis-Courmont <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22phonet: take correct lock to peek at the RX queueRémi Denis-Courmont1-2/+2
The receive queue is protected by its embedded spin-lock, not the socket lock, so we need the former lock here (and only that one). Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol") Reported-by: Luosili <[email protected]> Signed-off-by: Rémi Denis-Courmont <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22erofs: fix refcount on the metabuf used for inode lookupSandeep Dhavale1-14/+14
In erofs_find_target_block() when erofs_dirnamecmp() returns 0, we do not assign the target metabuf. This causes the caller erofs_namei()'s erofs_put_metabuf() at the end to be not effective leaving the refcount on the page. As the page from metabuf (buf->page) is never put, such page cannot be migrated or reclaimed. Fix it now by putting the metabuf from previous loop and assigning the current metabuf to target before returning so caller erofs_namei() can do the final put as it was intended. Fixes: 500edd095648 ("erofs: use meta buffers for inode lookup") Cc: <[email protected]> # 5.18+ Signed-off-by: Sandeep Dhavale <[email protected]> Reviewed-by: Gao Xiang <[email protected]> Reviewed-by: Jingbo Xu <[email protected]> Reviewed-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2024-02-21drm/xe: Do not include current dir for generated/xe_wa_oob.hDafna Hirschfeld7-7/+14
The generated file 'generated/xe_wa_oob.h' is included using: "generated/xe_wa_oob.h" which first look inside the source code. But the file resides in the build directory and should therefore be included using: <generated/xe_wa_oob.h> Signed-off-by: Dafna Hirschfeld <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe: Add debug prints for skipping rebindsMatthew Brost1-0/+7
Will help debug issues with VM binds. Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-22Merge tag 'amd-drm-next-6.9-2024-02-19' of ↵Dave Airlie117-413/+21302
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-02-19: amdgpu: - ATHUB 4.1 support - EEPROM support updates - RAS updates - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - Misc display fixes - Retimer fixes - DCN 3.5 fixes - VCN 4.x fixes - PSR fixes - PSP 14.0 support - VA_RESERVED cleanup - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - Suspend/resume fixes - DMUB updates amdkfd: - Trap handler enhancements - Fix cache size reporting - Relocate the trap handler radeon: - fix typo in print statement Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21net: sparx5: Add spinlock for frame transmission from CPUHoratiu Vultur3-0/+4
Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection. Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Daniel Machon <[email protected]> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net/sched: flower: Add lock protection when remove filter handleJianbo Liu1-1/+4
As IDR can't protect itself from the concurrent modification, place idr_remove() under the protection of tp->lock. Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21devlink: fix port dump cmd typeJiri Pirko1-1/+1
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same. Omit the fixes tag, even thought this is fix, better to target this for next release. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net: stmmac: Fix EST offset for dwmac 5.10Kurt Kanzenbach1-1/+1
Fix EST offset for dwmac 5.10. Currently configuring Qbv doesn't work as expected. The schedule is configured, but never confirmed: |[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST The reason seems to be the refactoring of the EST code which set the wrong EST offset for the dwmac 5.10. After fixing this it works as before: |[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST |[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched Tested on imx93. Fixes: c3f3b97238f6 ("net: stmmac: Refactor EST implementation") Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21Merge branch 'tools-ynl-fix-impossible-errors'Jakub Kicinski1-4/+15
Jakub Kicinski says: ==================== tools: ynl: fix impossible errors Fix bugs discovered while I was hacking in low level stuff in YNL and kept breaking the socket, exercising the "impossible" error paths. v1: https://lore.kernel.org/all/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tools: ynl: don't leak mcast_groups on init errorJakub Kicinski1-1/+7
Make sure to free the already-parsed mcast_groups if we don't get an ack from the kernel when reading family info. This is part of the ynl_sock_create() error path, so we won't get a call to ynl_sock_destroy() to free them later. Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tools: ynl: make sure we always pass yarg to mnl_cb_runJakub Kicinski1-3/+8
There is one common error handler in ynl - ynl_cb_error(). It expects priv to be a pointer to struct ynl_parse_arg AKA yarg. To avoid potential crashes if we encounter a stray NLMSG_ERROR always pass yarg as priv (or a struct which has it as the first member). ynl_cb_null() has a similar problem directly - it expects yarg but priv passed by the caller is ys. Found by code inspection. Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net: mctp: put sock on tag allocation failureJeremy Kerr1-1/+1
We may hold an extra reference on a socket if a tag allocation fails: we optimistically allocate the sk_key, and take a ref there, but do not drop if we end up not using the allocated key. Ensure we're dropping the sock on this failure by doing a proper unref rather than directly kfree()ing. Fixes: de8a6b15d965 ("net: mctp: add an explicit reference from a mctp_sk_key to sock") Signed-off-by: Jeremy Kerr <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22netfilter: nf_tables: use kzalloc for hook allocationFlorian Westphal1-1/+1
KMSAN reports unitialized variable when registering the hook, reg->hook_ops_type == NF_HOOK_OP_BPF) ~~~~~~~~~~~ undefined This is a small structure, just use kzalloc to make sure this won't happen again when new fields get added to nf_hook_ops. Fixes: 7b4b2fa37587 ("netfilter: annotate nf_tables base hook ops") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nf_tables: register hooks last when adding new chain/flowtablePablo Neira Ayuso1-38/+40
Register hooks last when adding chain/flowtable to ensure that packets do not walk over datastructure that is being released in the error path without waiting for the rcu grace period. Fixes: 91c7b38dc9f0 ("netfilter: nf_tables: use new transaction infrastructure to handle chain") Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nft_flow_offload: release dst in case direct xmit path is usedPablo Neira Ayuso1-0/+1
Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release(). kmemleak reports: unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110 Fixes: fa502c865666 ("netfilter: flowtable: simplify route logic") Reported-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nft_flow_offload: reset dst in route object after setting up flowPablo Neira Ayuso2-4/+14
dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow. Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nf_tables: set dormant flag on hook register failureFlorian Westphal1-0/+1
We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. Reported-and-tested-by: [email protected] Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-21Merge branch 'tls-fixes-for-record-type-handling-with-peek'Jakub Kicinski2-8/+61
Sabrina Dubroca says: ==================== tls: fixes for record type handling with PEEK There are multiple bugs in tls_sw_recvmsg's handling of record types when MSG_PEEK flag is used, which can lead to incorrectly merging two records: - consecutive non-DATA records shouldn't be merged, even if they're the same type (partly handled by the test at the end of the main loop) - records of the same type (even DATA) shouldn't be merged if one record of a different type comes in between ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21selftests: tls: add test for peeking past a record of a different typeSabrina Dubroca1-0/+19
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA the current code can look past the 2nd record and merge the 2 data records. Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21selftests: tls: add test for merging of same-type control messagesSabrina Dubroca1-0/+26
Two consecutive control messages of the same type should never be merged into one large received blob of data. Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: don't skip over different type records from the rx_listSabrina Dubroca1-8/+14
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA and do a recv(PEEK), the rx_list will contain the first two records. The next large recv will walk through the rx_list and copy data from record 1, then stop because record 2 is a different type. Since we haven't filled up our buffer, we will process the next available record. It's also DATA, so we can merge it with the current read. We shouldn't do that, since there was a record in between that we ignored. Add a flag to let process_rx_list inform tls_sw_recvmsg that it had more data available. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: stop recv() if initial process_rx_list gave us non-DATASabrina Dubroca1-1/+1
If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: break out of main loop when PEEK gets a non-data recordSabrina Dubroca1-0/+2
PEEK needs to leave decrypted records on the rx_list so that we can receive them later on, so it jumps back into the async code that queues the skb. Unfortunately that makes us skip the TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two records of the same (non-DATA) type are queued, we end up merging them. Add the same record type check, and make it unlikely to not penalize the async fastpath. Async decrypt only applies to data record, so this check is only needed for PEEK. process_rx_list also has similar issues. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()Vasiliy Kovalev1-5/+5
The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 Cc: [email protected] Signed-off-by: Vasiliy Kovalev <[email protected]> Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21hwmon: (nct6775) Fix access to temperature configuration registersGuenter Roeck1-2/+12
The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core Reported-by: Erhard Furtner <[email protected]> Closes: https://lore.kernel.org/linux-hwmon/[email protected]/ Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799") Cc: Ahmad Khalifa <[email protected]> Tested-by: Ahmad Khalifa <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-02-21docs: translations: use attribute to store current languageVegard Nossum1-6/+4
Akira Yokosawa reported [1] that the "translations" extension we added in commit 7418ec5b151f ("docs: translations: add translations links when they exist") broke the build on Sphinx versions v6.1.3 through 7.1.2 (possibly others) with the following error: Exception occurred: File "/usr/lib/python3.12/site-packages/sphinx/util/nodes.py", line 624, in _copy_except__document newnode = self.__class__(rawsource=self.rawsource, **self.attributes) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ TypeError: LanguagesNode.__init__() missing 1 required positional argument: 'current_language' The full traceback has been saved in /tmp/sphinx-err-7xmwytuu.log, if you want to report the issue to the developers. Solve this problem by making 'current_language' a true element attribute of the LanguagesNode element, which is probably the more correct way to do it anyway. Tested on Sphinx 2.x, 3.x, 6.x, and 7.x. [1]: https://lore.kernel.org/all/[email protected]/ Fixes: 7418ec5b151f ("docs: translations: add translations links when they exist") Reported-by: Akira Yokosawa <[email protected]> Signed-off-by: Vegard Nossum <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: Akira Yokosawa <[email protected]> # Sphinx 4.3.2, 5.3.0 and 6.2.1 Signed-off-by: Jonathan Corbet <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-21irqchip/gic-v3-its: Do not assume vPE tables are preallocatedOliver Upton1-1/+1
The GIC/ITS code is designed to ensure to pick up any preallocated LPI tables on the redistributors, as enabling LPIs is a one-way switch. There is no such restriction for vLPIs, and for GICv4.1 it is expected to allocate a new vPE table at boot. This works as intended when initializing an ITS, however when setting up a redistributor in cpu_init_lpis() the early return for preallocated RD tables skips straight past the GICv4 setup. This all comes to a head when trying to kexec() into a new kernel, as the new kernel silently fails to set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs. Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always initializes GICv4 on the way out, even if the other RD tables were preallocated. Fixes: 6479450f72c1 ("irqchip/gic-v4: Fix occasional VLPI drop") Reported-by: George Cherian <[email protected]> Co-developed-by: Marc Zyngier <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-02-21drm/xe: Implement VM snapshot support for BO's and userptrMaarten Lankhorst4-4/+211
Since we cannot immediately capture the BO's and userptr, perform it in 2 stages. The immediate stage takes a reference to each BO and userptr, while a delayed worker captures the contents and then frees the reference. This is required because in signaling context, no locks can be taken, no memory can be allocated, and no waits on userspace can be performed. With the delayed worker, all of this can be performed very easily, without having to resort to hacks. Changes since v1: - Fix crash on NULL captured vm. - Use ascii85_encode to capture BO contents and save some space. - Add length to coredump output for each captured area. Changes since v2: - Dump each mapping on their own line, to simplify tooling. - Fix null pointer deref in xe_vm_snapshot_free. Changes since v3: - Don't add uninitialized value to snap->ofs. (Souza) - Use kernel types for u32 and u64. - Move snap_mutex destruction to final vm destruction. (Souza) Changes since v4: - Remove extra memset. (Souza) Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe: Add vm snapshot mutex for easily taking a vm snapshot during devcoredumpMaarten Lankhorst2-0/+13
The devcoredump is done in fence signaling context. Because of this, we cannot take any of the normal mutexes or we would invert. Normal: Take vm->lock, dma_fence_wait() Devcoredump: from dma_fence_wait() context, take vm->lock. This doesn't work, and we only care about integrity, so take the locks around additions and removals of vma's. Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe: Annotate each dumpable vma as suchMaarten Lankhorst2-0/+16
In preparation for snapshot dumping, mark each dumpable VMA as such, so we can walk over the VM later and dump it. Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe: Add uapi for dumpable bosMaarten Lankhorst2-1/+3
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this mapping should be dumped. This is not hooked up, but the uapi should be ready before merging. It's likely easier to dump the contents of the bo's at devcoredump readout time, so it's better if the bos will stay unmodified after a hang. The NEEDS_CPU_MAPPING flag is removed as requirement. Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe: Clear all snapshot members after deleting coredumpMaarten Lankhorst1-0/+2
It's not strictly needed to clear right now, but this prevents bugs from dangling pointers. Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21drm/xe/snapshot: Remove drm_err on guc alloc failuresMaarten Lankhorst1-11/+3
The kernel will complain loudly if allocation fails, no need to do it ourselves. Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21ata: libata-core: Do not call ata_dev_power_set_standby() twiceDamien Le Moal1-29/+30
For regular system shutdown, ata_dev_power_set_standby() will be executed twice: once the scsi device is removed and another when ata_pci_shutdown_one() executes and EH completes unloading the devices. Make the second call to ata_dev_power_set_standby() do nothing by using ata_dev_power_is_active() and return if the device is already in standby. Fixes: 2da4c5e24e86 ("ata: libata-core: Improve ata_dev_power_set_active()") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Niklas Cassel <[email protected]>
2024-02-21irqchip/mbigen: Don't use bus_get_dev_root() to find the parentChen Jun1-7/+1
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(), but subsys_register() is not called by platform_bus_init(). Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL. This makes mbigen_of_create_domain() always return -ENODEV. Don't try to retrieve the parent via bus_get_dev_root() and unconditionally hand a NULL pointer to of_platform_device_create() to fix this. Fixes: fea087fc291b ("irqchip/mbigen: move to use bus_get_dev_root()") Signed-off-by: Chen Jun <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-02-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull kvm fixes from Paolo Bonzini: "Two fixes for ARM ITS emulation. Unmapped interrupts were used instead of ignored, causing NULL pointer dereferences" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
2024-02-21Merge tag 'for-6.8-rc5-tag' of ↵Linus Torvalds2-18/+46
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - Fix a deadlock in fiemap. There was a big lock around the whole operation that can interfere with a page fault and mkwrite. Reducing the lock scope can also speed up fiemap - Fix range condition for extent defragmentation which could lead to worse layout in some cases * tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix deadlock with fiemap and extent locking btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
2024-02-21Merge tag 'v6.8-p4' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a stack overflow in virtio" * tag 'v6.8-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: virtio/akcipher - Fix stack overflow on memcpy
2024-02-21cache: ax45mp_cache: Align end size to cache boundary in ↵Lad Prabhakar1-0/+4
ax45mp_dma_cache_wback() Align the end size to cache boundary size in ax45mp_dma_cache_wback() callback likewise done in ax45mp_dma_cache_inv() callback. Additionally return early in case of start == end. Fixes: d34599bcd2e4 ("cache: Add L2 cache management for Andes AX45MP RISC-V core") Reported-by: Pavel Machek <[email protected]> Link: https://lore.kernel.org/cip-dev/[email protected]/ Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Conor Dooley <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.