aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03drm/amd/display: Avoid NULL dereference of timing generatorWayne Lin1-2/+2
[Why & How] Check whether assigned timing generator is NULL or not before accessing its funcs to prevent NULL dereference. Reviewed-by: Jun Lei <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdkfd: Update cache info for GFX 9.4.3Mukul Joshi1-2/+16
Update cache info reporting based on compute and memory partitioning modes. Signed-off-by: Mukul Joshi <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdkfd: Populate cache info for GFX 9.4.3Mukul Joshi1-1/+65
GFX 9.4.3 uses a new version of the GC info table which contains the cache info. This patch adds a new function to populate the cache info from IP discovery for GFX 9.4.3. Signed-off-by: Mukul Joshi <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64Alex Deucher1-0/+2
Issues were reported with commit 1cfb4d612127 ("drm/amdgpu: put MQDs in VRAM") on an ADLINK Ampere Altra Developer Platform (AVA developer platform). Various ARM systems seem to have problems related to PCIe and MMIO access. In this case, I'm not sure if this is specific to the ADLINK platform or ARM in general. Seems to be some coherency issue with VRAM. For now, just don't put MQDs in VRAM on ARM. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-October/100453.html Fixes: 1cfb4d612127 ("drm/amdgpu: put MQDs in VRAM") Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-11-03drm/amdgpu/smu13: drop compute workload workaroundAlex Deucher1-30/+2
This was fixed in PMFW before launch and is no longer required. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.1.x
2023-11-03drm/amdgpu: add a retry for IP discovery initAlex Deucher1-2/+21
AMD dGPUs have integrated FW that runs as soon as the device gets power and initializes the board (determines the amount of memory, provides configuration details to the driver, etc.). For direct PCIe attached cards this happens as soon as power is applied and normally completes well before the OS has even started loading. However, with hotpluggable ports like USB4, the driver needs to wait for this to complete before initializing the device. This normally takes 60-100ms, but could take longer on some older boards periodically due to memory training. Retry for up to a second. In the non-hotplug case, there should be no change in behavior and this should complete on the first try. v2: adjust test criteria v3: adjust checks for the masks, only enable on removable devices v4: skip bif_fb_en check Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-11-03drm/amdgpu: ungate power gating when system suspendPerry Yuan1-0/+9
[Why] During suspend, if GFX DPM is enabled and GFXOFF feature is enabled the system may get hung. So, it is suggested to disable GFXOFF feature during suspend and enable it after resume. [How] Update the code to disable GFXOFF feature during suspend and enable it after resume. [ 311.396526] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 311.396530] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 311.396531] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 Acked-by: Yang Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Kun Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-11-03drm/radeon: replace 1-element arrays with flexible-array membersJosé Pekkarinen1-21/+21
Reported by coccinelle, the following patch will move the following 1 element arrays to flexible arrays. drivers/gpu/drm/radeon/atombios.h:5523:32-48: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5545:32-48: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5461:34-44: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4447:30-40: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4236:30-41: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7095:28-45: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:3896:27-37: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5443:16-25: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:5454:34-43: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4603:21-32: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4628:32-46: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:6285:29-39: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4296:30-36: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4756:28-36: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:4064:22-35: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7327:9-24: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7332:32-53: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7362:26-41: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7369:29-44: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7349:24-32: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/gpu/drm/radeon/atombios.h:7355:27-35: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: José Pekkarinen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amd: Fix UBSAN array-index-out-of-bounds for Powerplay headersAlex Deucher2-14/+14
For pptable structs that use flexible array sizes, use flexible arrays. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039926 Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdgpu: don't use pci_is_thunderbolt_attached()Alex Deucher2-6/+7
It's only valid on Intel systems with the Intel VSEC. Use dev_is_removable() instead. This should do the right thing regardless of the platform. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-11-03drm/amdgpu: don't use ATRM for external devicesAlex Deucher1-0/+5
The ATRM ACPI method is for fetching the dGPU vbios rom image on laptops and all-in-one systems. It should not be used for external add in cards. If the dGPU is thunderbolt connected, don't try ATRM. v2: pci_is_thunderbolt_attached only works for Intel. Use pdev->external_facing instead. v3: dev_is_removable() seems to be what we want Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-11-03drm/amdgpu/gfx10,11: use memcpy_to/fromio for MQDsAlex Deucher2-12/+12
Since they were moved to VRAM, we need to use the IO variants of memcpy. Fixes: 1cfb4d612127 ("drm/amdgpu: put MQDs in VRAM") Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdgpu: use mode-2 reset for RAS poison consumptionTao Zhou1-1/+5
Switch from mode-1 reset to mode-2 for poison consumption. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Stanley.Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amdgpu doorbell range should be set when gpu recoveryLin.Cao1-0/+7
GFX doorbell range should be set after flr otherwise the gfx doorbell range will be overlap with MEC. v2: remove "amdgpu_sriov_vf" and "amdgpu_in_reset" check, and add grbm select for the case of 2 gfx rings. Signed-off-by: Lin.Cao <[email protected]> Acked-by: ZhenGuo Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03drm/amd/pm: Return 0 as default min power limit for legacy asicsMa Jun1-0/+3
Return 0 as the default min power limit for the asics use powerplay. Signed-off-by: Ma Jun <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-03io_uring/rw: don't attempt to allocate async data if opcode doesn't need itJens Axboe1-0/+7
The new read multishot method doesn't need to allocate async data ever, as it doesn't do vectored IO and it must only be used with provided buffers. While it doesn't have ->prep_async() set, it also sets ->async_size to 0, which is different from any other read/write type we otherwise support. If it's used on a file type that isn't pollable, we do try and allocate this async data, and then try and use that data. But since we passed in a size of 0 for the data, we get a NULL back on data allocation. We then proceed to dereference that to copy state, and that obviously won't end well. Add a check in io_setup_async_rw() for this condition, and avoid copying state. Also add a check for whether or not buffer selection is specified in prep while at it. Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218101 Signed-off-by: Jens Axboe <[email protected]>
2023-11-03Merge tag 'cpufreq-arm-updates-6.7-part2' of ↵Rafael J. Wysocki16-1/+1633
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.7 (part 2) from Viresh kumar: "- Add support for several Qualcomm SoC versions (Robert Marko and Varadarajan Narayanan)." * tag 'cpufreq-arm-updates-6.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx cpufreq: qcom-nvmem: add support for IPQ8074 soc: qcom: socinfo: Add IDs for IPQ8174 family dt-bindings: arm: qcom,ids: Add IDs for IPQ8174 family dt-bindings: qcom: geni-se: Allow dma-coherent soc: qcom: socinfo: Add SoC ID for QCM6490 dt-bindings: arm: qcom,ids: Add SoC ID for QCM6490 soc: qcom: socinfo: Add SM8550-adjacent PMICs soc: qcom: wcnss_ctrl: Remove redundant initialization owner in wcnss_ctrl_driver soc: qcom: socinfo: Add Soc ID for SM7150P dt-bindings: arm: qcom,ids: Add Soc ID for SM7150P firmware: Add support for Qualcomm UEFI Secure Application firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface lib/ucs2_string: Add UCS-2 strscpy function
2023-11-03Merge tag 'linux-cpupower-6.7-rc1' of ↵Rafael J. Wysocki1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Merge cpupower utility update for 6.7-rc1 from Shuah Khan: "This cpupower update for Linux 6.7-rc1 consists of a single fix to documentation to fix reference to a removed document." * tag 'linux-cpupower-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: fix reference to nonexistent document
2023-11-03exfat: fix ctime is not updatedYuezhang Mo1-0/+1
Commit 4c72a36edd54 ("exfat: convert to new timestamp accessors") removed attr_copy() from exfat_set_attr(). It causes xfstests generic/221 to fail. In xfstests generic/221, it tests ctime should be updated even if futimens() update atime only. But in this case, ctime will not be updated if attr_copy() is removed. attr_copy() may also update other attributes, and removing it may cause other bugs, so this commit restores to call attr_copy() in exfat_set_attr(). Fixes: 4c72a36edd54 ("exfat: convert to new timestamp accessors") Signed-off-by: Yuezhang Mo <[email protected]> Reviewed-by: Andy Wu <[email protected]> Reviewed-by: Aoyama Wataru <[email protected]> Reviewed-by: Sungjong Seo <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2023-11-03exfat: fix setting uninitialized time to ctime/atimeYuezhang Mo1-2/+2
An uninitialized time is set to ctime/atime in __exfat_write_inode(). It causes xfstests generic/003 and generic/192 to fail. And since there will be a time gap between setting ctime/atime to the inode and writing back the inode, so ctime/atime should not be set again when writing back the inode. Fixes: 4c72a36edd54 ("exfat: convert to new timestamp accessors") Signed-off-by: Yuezhang Mo <[email protected]> Reviewed-by: Andy Wu <[email protected]> Reviewed-by: Aoyama Wataru <[email protected]> Reviewed-by: Sungjong Seo <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2023-11-03ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messagesEugen Hristev1-2/+2
Property 'playback-codecs' is referenced as 'speaker-codec' in the error message, and this can lead to confusion. Correct the error message such that the correct property name is referenced. Fixes: 0da16e370dd7 ("ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s") Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-11-03netlink: fill in missing MODULE_DESCRIPTION()Jakub Kicinski1-0/+1
W=1 builds now warn if a module is built without a MODULE_DESCRIPTION(). Fill it in for sock_diag. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03net/tcp: fix possible out-of-bounds reads in tcp_hash_fail()Eric Dumazet1-6/+7
syzbot managed to trigger a fault by sending TCP packets with all flags being set. v2: - While fixing this bug, add PSH flag handling and represent flags the way tcpdump does : [S], [S.], [P.] - Print 4-tuples more consistently between families. BUG: KASAN: stack-out-of-bounds in string_nocheck lib/vsprintf.c:645 [inline] BUG: KASAN: stack-out-of-bounds in string+0x394/0x3d0 lib/vsprintf.c:727 Read of size 1 at addr ffffc9000397f3f5 by task syz-executor299/5039 CPU: 1 PID: 5039 Comm: syz-executor299 Not tainted 6.6.0-rc7-syzkaller-02075-g55c900477f5b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 string_nocheck lib/vsprintf.c:645 [inline] string+0x394/0x3d0 lib/vsprintf.c:727 vsnprintf+0xc5f/0x1870 lib/vsprintf.c:2818 vprintk_store+0x3a0/0xb80 kernel/printk/printk.c:2191 vprintk_emit+0x14c/0x5f0 kernel/printk/printk.c:2288 vprintk+0x7b/0x90 kernel/printk/printk_safe.c:45 _printk+0xc8/0x100 kernel/printk/printk.c:2332 tcp_inbound_hash.constprop.0+0xdb2/0x10d0 include/net/tcp.h:2760 tcp_v6_rcv+0x2b31/0x34d0 net/ipv6/tcp_ipv6.c:1882 ip6_protocol_deliver_rcu+0x33b/0x13d0 net/ipv6/ip6_input.c:438 ip6_input_finish+0x14f/0x2f0 net/ipv6/ip6_input.c:483 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0xce/0x440 net/ipv6/ip6_input.c:492 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0x563/0x720 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527 __netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641 netif_receive_skb_internal net/core/dev.c:5727 [inline] netif_receive_skb+0x133/0x700 net/core/dev.c:5786 tun_rx_batched+0x429/0x780 drivers/net/tun.c:1579 tun_get_user+0x29e7/0x3bc0 drivers/net/tun.c:2002 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1956 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2717b5adea9e ("net/tcp: Add tcp_hash_fail() ratelimited logs") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Francesco Ruggeri <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: Dmitry Safonov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03net: ethernet: ti: am65-cpsw: rx_pause/tx_pause controls wrong directionRonald Wahl1-2/+2
The rx_pause flag says that whether we support receiving Pause frames. When a Pause frame is received TX is delayed for some time. This is TX flow control. In the same manner tx_pause is actually RX flow control. Signed-off-by: Ronald Wahl <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03Revert "mmc: core: Capture correct oemid-bits for eMMC cards"Dominique Martinet1-1/+1
This reverts commit 84ee19bffc9306128cd0f1c650e89767079efeff. The commit above made quirks with an OEMID fail to be applied, as they were checking card->cid.oemid for the full 16 bits defined in MMC_FIXUP macros but the field would only contain the bottom 8 bits. eMMC v5.1A might have bogus values in OEMID's higher bits so another fix will be made, but it has been decided to revert this until that is ready. Fixes: 84ee19bffc93 ("mmc: core: Capture correct oemid-bits for eMMC cards") Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/CAPDyKFqkKibcXnwjnhc3+W1iJBHLeqQ9BpcZrSwhW2u9K2oUtg@mail.gmail.com Signed-off-by: Dominique Martinet <[email protected]> Cc: [email protected] Cc: Alex Fetters <[email protected]> Reviewed-by: Avri Altman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-03mmc: vub300: fix an error codeDan Carpenter1-0/+1
This error path should return -EINVAL instead of success. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Dan Carpenter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-03mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54ABean Huo5-6/+19
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache operation be allowed only after a write has occurred. Otherwise, the cache flush command or subsequent commands will time out. Signed-off-by: Bean Huo <[email protected]> Signed-off-by: Rafael Beims <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-03pwm: samsung: Document new member .channel in struct samsung_pwm_chipUwe Kleine-König1-0/+1
My earlier commit reworking how driver data is tracked added a new member to struct samsung_pwm_chip but failed to add matching documentation. Make up leeway. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data") Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2023-11-03mmc: sdhci_am654: fix start loop index for TAP value parsingNitin Yadav1-1/+1
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT are currently ignored for all SD/MMC and eMMC modes. Fix this by making start loop index to MMC_TIMING_LEGACY. Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes") Signed-off-by: Nitin Yadav <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-03tcp: fix fastopen code vs usec TSEric Dumazet4-7/+6
After blamed commit, TFO client-ack-dropped-then-recovery-ms-timestamps packetdrill test failed. David Morley and Neal Cardwell started investigating and Neal pointed that we had : tcp_conn_request() tcp_try_fastopen() -> tcp_fastopen_create_child -> child = inet_csk(sk)->icsk_af_ops->syn_recv_sock() -> tcp_create_openreq_child() -> copy req_usec_ts from req: newtp->tcp_usec_ts = treq->req_usec_ts; // now the new TFO server socket always does usec TS, no matter // what the route options are... send_synack() -> tcp_make_synack() // disable tcp_rsk(req)->req_usec_ts if route option is not present: if (tcp_rsk(req)->req_usec_ts < 0) tcp_rsk(req)->req_usec_ts = dst_tcp_usec_ts(dst); tcp_conn_request() has the initial dst, we can initialize tcp_rsk(req)->req_usec_ts there instead of later in send_synack(); This means tcp_rsk(req)->req_usec_ts can be a boolean. Many thanks to David an Neal for their help. Fixes: 614e8316aa4c ("tcp: add support for usec resolution in TCP TS values") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Suggested-by: Neal Cardwell <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: David Morley <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03selftests: pmtu.sh: fix result checkingHangbin Liu1-1/+1
In the PMTU test, when all previous tests are skipped and the new test passes, the exit code is set to 0. However, the current check mistakenly treats this as an assignment, causing the check to pass every time. Consequently, regardless of how many tests have failed, if the latest test passes, the PMTU test will report a pass. Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Po-Hsu Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03net: stmmac: xgmac: Enable support for multiple Flexible PPS outputsFurong Xu2-2/+14
From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays in Fixed PPS mode by default. XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are read-only reserved, and they are already in Flexible mode by default, our new code always set PPSEN{1,2,3} do not make things worse ;-) Fixes: 95eaf3cd0a90 ("net: stmmac: dwxgmac: Add Flexible PPS support") Reviewed-by: Serge Semin <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Furong Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03Fix termination state for idr_for_each_entry_ul()NeilBrown1-2/+4
The comment for idr_for_each_entry_ul() states after normal termination @entry is left with the value NULL This is not correct in the case where UINT_MAX has an entry in the idr. In that case @entry will be non-NULL after termination. No current code depends on the documentation being correct, but to save future code we should fix it. Also fix idr_for_each_entry_continue_ul(). While this is not documented as leaving @entry as NULL, the mellanox driver appears to depend on it doing so. So make that explicit in the documentation as well as in the code. Fixes: e33d2b74d805 ("idr: fix overflow case for idr_for_each_entry_ul()") Cc: Matthew Wilcox <[email protected]> Cc: Chris Mi <[email protected]> Cc: Cong Wang <[email protected]> Signed-off-by: NeilBrown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-03swiotlb: do not free decrypted pages if dynamicPetr Tesarik1-9/+16
Fix these two error paths: 1. When set_memory_decrypted() fails, pages may be left fully or partially decrypted. 2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the physical address is too high. To fix the first issue, call set_memory_encrypted() on the allocated region after a failed decryption attempt. If that also fails, leak the pages. To fix the second issue, check that the TLB physical address is below the requested limit before decrypting. Let the caller differentiate between unsuitable physical address (=> retry from a lower zone) and allocation failures (=> no point in retrying). Cc: [email protected] Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool") Signed-off-by: Petr Tesarik <[email protected]> Reviewed-by: Rick Edgecombe <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2023-11-02Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of ↵Linus Torvalds106-1000/+894
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ...
2023-11-02Merge tag 'mm-stable-2023-11-01-14-33' of ↵Linus Torvalds281-5277/+11683
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/[email protected]/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ...
2023-11-03nouveau/gsp: add some basic registry entries.Dave Airlie1-10/+35
The nvidia driver sets these two basic registry entries always, so copy it. Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2023-11-03nouveau/gsp: fix message signature.Dave Airlie1-1/+1
This original one was backwards, compared to traces from nvidia driver. Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2023-11-03nouveau/gsp: move to 535.113.01Dave Airlie73-171/+217
This moves the initial effort to the latest 535 firmware. The gsp msg structs have changed, and the message passing also. The wpr also seems to have some struct changes. This version of the firmware will be what we are stuck on for a while, until we can refactor the driver and work out a better path forward. Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2023-11-02Merge tag 'v6.7-p1' of ↵Linus Torvalds275-3331/+10670
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ...
2023-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds127-1503/+8885
Pull kvm updates from Paolo Bonzini: "ARM: - Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest - Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table - Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM - Guest support for memory operation instructions (FEAT_MOPS) - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code - Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use - Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations - Miscellaneous kernel and selftest fixes LoongArch: - New architecture for kvm. The hardware uses the same model as x86, s390 and RISC-V, where guest/host mode is orthogonal to supervisor/user mode. The virtualization extensions are very similar to MIPS, therefore the code also has some similarities but it's been cleaned up to avoid some of the historical bogosities that are found in arch/mips. The kernel emulates MMU, timer and CSR accesses, while interrupt controllers are only emulated in userspace, at least for now. RISC-V: - Support for the Smstateen and Zicond extensions - Support for virtualizing senvcfg - Support for virtualized SBI debug console (DBCN) S390: - Nested page table management can be monitored through tracepoints and statistics x86: - Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC, which could result in a dropped timer IRQ - Avoid WARN on systems with Intel IPI virtualization - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without forcing more common use cases to eat the extra memory overhead. - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and SBPB, aka Selective Branch Predictor Barrier). - Fix a bug where restoring a vCPU snapshot that was taken within 1 second of creating the original vCPU would cause KVM to try to synchronize the vCPU's TSC and thus clobber the correct TSC being set by userspace. - Compute guest wall clock using a single TSC read to avoid generating an inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads. - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain about a "Firmware Bug" if the bit isn't set for select F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server 2022. - Don't apply side effects to Hyper-V's synthetic timer on writes from userspace to fix an issue where the auto-enable behavior can trigger spurious interrupts, i.e. do auto-enabling only for guest writes. - Remove an unnecessary kick of all vCPUs when synchronizing the dirty log without PML enabled. - Advertise "support" for non-serializing FS/GS base MSR writes as appropriate. - Harden the fast page fault path to guard against encountering an invalid root when walking SPTEs. - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n. - Use the fast path directly from the timer callback when delivering Xen timer events, instead of waiting for the next iteration of the run loop. This was not done so far because previously proposed code had races, but now care is taken to stop the hrtimer at critical points such as restarting the timer or saving the timer information for userspace. - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag. - Optimize injection of PMU interrupts that are simultaneous with NMIs. - Usual handful of fixes for typos and other warts. x86 - MTRR/PAT fixes and optimizations: - Clean up code that deals with honoring guest MTRRs when the VM has non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled. - Zap EPT entries when non-coherent DMA assignment stops/start to prevent using stale entries with the wrong memtype. - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y This was done as a workaround for virtual machine BIOSes that did not bother to clear CR0.CD (because ancient KVM/QEMU did not bother to set it, in turn), and there's zero reason to extend the quirk to also ignore guest PAT. x86 - SEV fixes: - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while running an SEV-ES guest. - Clean up the recognition of emulation failures on SEV guests, when KVM would like to "skip" the instruction but it had already been partially emulated. This makes it possible to drop a hack that second guessed the (insufficient) information provided by the emulator, and just do the right thing. Documentation: - Various updates and fixes, mostly for x86 - MTRR and PAT fixes and optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits) KVM: selftests: Avoid using forced target for generating arm64 headers tools headers arm64: Fix references to top srcdir in Makefile KVM: arm64: Add tracepoint for MMIO accesses where ISV==0 KVM: arm64: selftest: Perform ISB before reading PAR_EL1 KVM: arm64: selftest: Add the missing .guest_prepare() KVM: arm64: Always invalidate TLB for stage-2 permission faults KVM: x86: Service NMI requests after PMI requests in VM-Enter path KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs KVM: arm64: Refine _EL2 system register list that require trap reinjection arm64: Add missing _EL2 encodings arm64: Add missing _EL12 encodings KVM: selftests: aarch64: vPMU test for validating user accesses KVM: selftests: aarch64: vPMU register test for unimplemented counters KVM: selftests: aarch64: vPMU register test for implemented counters KVM: selftests: aarch64: Introduce vpmu_counter_access test tools: Import arm_pmuv3.h KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} ...
2023-11-02Merge tag 'sh-for-v6.7-tag1' of ↵Linus Torvalds29-1704/+27
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "While the previously announced patch series for converting arch/sh to device trees is not yet ready for inclusion to mainline and therefore didn't make it for this pull request, there are still a small number changes for v6.7 which include one platform (board plus CPU and driver code) removal plus two fixes. The removal sent in by Arnd Bergmann concerns the microdev board which was an early SuperH prototype board that was never used in production. With the board removed, we were able to drop the now unused code for the SH4-202 CPU and well as the driver code for the superhyway bus and a custom implementation for ioport_map() and ioport_unmap() which will allow us to simplify ioport handling in the future. Another patch set by Geert Uytterhoeven revives SuperH BIOS earlyprintk support which got accidentally disabled in e76fe57447e88916 ("sh: Remove old early serial console code V2"), the second patch in the series updates the documentation. Finally, a patch by Masami Hiramatsu fixes a regression reported by the kernel test robot which uncovered that arch/sh is not implementing arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local() instead" * tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local() Documentation: kernel-parameters: Add earlyprintk=bios on SH sh: bios: Revive earlyprintk support sh: machvec: Remove custom ioport_{un,}map() sh: Remove superhyway bus support sh: Remove unused SH4-202 support sh: Remove stale microdev board
2023-11-02Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds9-33/+25
Pull ARM updates from Russell King: - fix some kernel-doc warnings - fix stack depot IRQ stack filter - cast memset() byte to unsigned char - explicitly include correct DI includes - fix ARCH_LOW_ADDRESS_LIMIT with CONFIG_ZONE_DMA - fix get_user() problems when linker uses a veneer - make including linux/uaccess.h self-contained on ARM * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9326/1: make <linux/uaccess.h> self-contained for ARM ARM: 9324/1: fix get_user() broken with veneer ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA ARM: 9322/1: Explicitly include correct DT includes ARM: 9321/1: memset: cast the constant byte to unsigned char ARM: 9320/1: fix stack depot IRQ stack filter ARM: 9319/1: sa1111: fix sa1111_probe kernel-doc warnings
2023-11-02Merge tag 'm68knommu-for-v6.7' of ↵Linus Torvalds11-19/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A few changes, most of them related to fixing warnings when compiling with "W=1". These follow up Geert's recent changes for M68K for this too. These ones complete the fixes for the nommu and ColdFire specific code. Also a couple of other fixes to improve ROM default addressing and compiling for the Cleopatra boards. Summary: - improve default Kconfig ROM section settings - fix compilation for some Cleopatra boards - fixes and cleanups for warnings compiling with 'W=1'" * tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: 68000: fix warning in timer code m68k: 68000: fix warnings in 68000 interrupt handling m68k: coldfire: remove unused variable in MMU code m68k: coldfire: fix warnings in uboot argument processing m68k: coldfire: make mcf_maskimr() static m68k: coldfire: ensure gpio prototypes visible m68k: coldfire: add and use "vectors.h" m68knommu: fix compilation for ColdFire/Cleopatra boards m68knommu: improve config ROM setting defaults
2023-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds194-498/+1178
Pull rdma updates from Jason Gunthorpe: "Nothing exciting this cycle, most of the diffstat is changing SPDX 'or' to 'OR'. Summary: - Bugfixes for hns, mlx5, and hfi1 - Hardening patches for size_*, counted_by, strscpy - rts fixes from static analysis - Dump SRQ objects in rdma netlink, with hns support - Fix a performance regression in mlx5 MR deregistration - New XDR (200Gb/lane) link speed - SRQ record doorbell latency optimization for hns - IPSEC support for mlx5 multi-port mode - ibv_rereg_mr() support for irdma - Affiliated event support for bnxt_re - Opt out for the spec compliant qkey security enforcement as we discovered SW that breaks under enforcement - Comment and trivial updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits) IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF RDMA/mlx5: Fix mkey cache WQ flush RDMA/hfi1: Workaround truncation compilation error IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock RDMA/core: Remove NULL check before dev_{put, hold} RDMA/hfi1: Remove redundant assignment to pointer ppd RDMA/mlx5: Change the key being sent for MPV device affiliation RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error() RDMA/hns: Fix init failure of RoCE VF and HIP08 RDMA/hns: Fix unnecessary port_num transition in HW stats allocation RDMA/hns: The UD mode can only be configured with DCQCN RDMA/hns: Add check for SL RDMA/hns: Fix signed-unsigned mixed comparisons RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common() RDMA/hns: Fix printing level of asynchronous events RDMA/core: Add support to set privileged QKEY parameter RDMA/bnxt_re: Do not report SRQ error in srq notification RDMA/bnxt_re: Report async events and errors RDMA/bnxt_re: Update HW interface headers IB/mlx5: Fix rdma counter binding for RAW QP ...
2023-11-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds103-1362/+2747
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ...
2023-11-02Merge tag 'libnvdimm-for-6.7' of ↵Linus Torvalds7-25/+32
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: - updates to deprecated and changed interfaces - bug/kdoc fixes * tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: remove kernel-doc warnings: testing: nvdimm: make struct class structures constant libnvdimm: Annotate struct nd_region with __counted_by nd_btt: Make BTT lanes preemptible libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value dax: refactor deprecated strncpy
2023-11-02Merge tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds2-9/+4
Pull IPMI update from Corey Minyard: "Only one change, and I would normally just wait, but it will make the people trying to get rid of strncpy happy. Its a good change, anyway" * tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi: ipmi: refactor deprecated strncpy
2023-11-02Merge tag 'leds-next-6.7' of ↵Linus Torvalds59-366/+1349
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Core Frameworks: - Add support for a bunch more colours New Drivers: - Add support for Kinetic KTD2026/7 RGB/White LEDs New Functionality: - Add support for device to enter HW Controlled Mode to Turris Omnia LEDs - Add support for HW Gamma Correction to Turris Omnia LEDs Fix-ups: - Apply new __counted_by() annotation to several data structures containing flexible arrays - Rid the return value from Platform's .remove() operation - Use *_cansleep() variants for instances were threads can sleep - Improve the semantics when setting the brightness - Generic clean-ups; code reduction, coding style, standard patterns - Replace strncpy() with strscpy() - Fix-up / add various documentation - Re-author the GPIO associated Trigger to use trigger-sources - Move to using standard APIs and helpers - Improve error checking - Stop using static GPIO bases Bug Fixes: - Fix Pointer to Enum casing warnings - Do not pretend that I2C backed device supports SMBUS - Ensure PWM LEDs are extinguished when disabled, rather than held in a state - Fix 'output may be truncated' warnings" * tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits) leds: lp5521: Add an error check in lp5521_post_init_device leds: gpio: Update headers leds: gpio: Remove unneeded assignment leds: gpio: Move temporary variable for struct device to gpio_led_probe() leds: gpio: Refactor code to use devm_gpiod_get_index_optional() leds: gpio: Utilise PTR_ERR_OR_ZERO() leds: gpio: Keep driver firmware interface agnostic leds: core: Refactor led_update_brightness() to use standard pattern leds: turris-omnia: Fix brightness setting and trigger activating leds: sc27xx: Move mutex_init() down leds: trigger: netdev: Move size check in set_device_name leds: Add ktd202x driver dt-bindings: leds: Add Kinetic KTD2026/2027 LED leds: core: Add more colors from DT bindings to led_colors dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME) leds: tca6507: Don't use fixed GPIO base leds: lp3952: Convert to use maple tree register cache leds: lm392x: Convert to use maple tree register cache leds: aw200xx: Convert to use maple tree register cache leds: lm3601x: Convert to use maple tree register cache ...
2023-11-02Merge tag 'backlight-next-6.7' of ↵Linus Torvalds5-31/+120
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Add new Device Tree binding for Monolithic Power (MPS) MP3309C step-up converter - Document brightness-levels in bindings for; generic, LED and PWM Bug Fixes: - Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()" * tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: dt-bindings: backlight: Add brightness-levels related common properties backlight: pwm_bl: Disable PWM on shutdown, suspend and remove dt-bindings: backlight: Add MPS MP3309C
Powered by cgit, Gruvboxed by Blaster4385.