aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-04i2c: qcom-geni: Add shutdown callback for i2cRoja Rani Yarubandi1-0/+9
If the hardware is still accessing memory after SMMU translation is disabled (as part of smmu shutdown callback), then the IOVAs (I/O virtual address) which it was using will go on the bus as the physical addresses which will result in unknown crashes like NoC/interconnect errors. So, implement shutdown callback for i2c driver to suspend the bus during system "reboot" or "shutdown". Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-06-04platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by ↵Mykola Kostenok1-2/+2
IRQF_NO_AUTOEN flag" It causes mlxreg-hotplug probing failure: request_threaded_irq() returns -EINVAL due to true value of condition: ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) after flag "IRQF_NO_AUTOEN" has been added to: err = devm_request_irq(&pdev->dev, priv->irq, mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING | IRQF_SHARED | IRQF_NO_AUTOEN, "mlxreg-hotplug", priv); This reverts commit bee3ecfed0fc ("platform/mellanox: mlxreg-hotplug: move to use request_irq by IRQF_NO_AUTOEN flag"). Signed-off-by: Mykola Kostenok <[email protected]> Acked-by: Vadim Pasternak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-06-04platform/surface: dtx: Add missing mutex_destroy() call in failure pathMaximilian Luz1-0/+1
When we fail to open the device file due to DTX being shut down, the mutex is initialized but never destroyed. We are destroying it when releasing the file, so add the missing call in the failure path as well. Fixes: 1d609992832e ("platform/surface: Add DTX driver") Signed-off-by: Maximilian Luz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-06-04Merge tag 'sound-5.13-rc5' of ↵Linus Torvalds8-12/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A couple of small fixes are found in the ALSA core side at this time; a fix in the new LED handling code and a long-standing (and likely no one would notice) ioctl bug. The rest are usual HD-audio fixes, mostly device-specific quirks but also one major regression fix that was introduced in 5.13" * tag 'sound-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: update the power_state during the direct-complete ALSA: timer: Fix master timer notification ALSA: control led: fix memory leak in snd_ctl_led_register ALSA: hda: Fix for mute key LED for HP Pavilion 15-CK0xx ALSA: hda/cirrus: Set Initial DMIC volume to -26 dB ALSA: hda: Fix a regression in Capture Switch mixer read ALSA: hda: Add AlderLake-M PCI ID
2021-06-04x86/sev: Check SME/SEV support in CPUID firstPu Wen1-5/+6
The first two bits of the CPUID leaf 0x8000001F EAX indicate whether SEV or SME is supported, respectively. It's better to check whether SEV or SME is actually supported before accessing the MSR_AMD64_SEV to check whether SEV or SME is enabled. This is both a bare-metal issue and a guest/VM issue. Since the first generation Hygon Dhyana CPU doesn't support the MSR_AMD64_SEV, reading that MSR results in a #GP - either directly from hardware in the bare-metal case or via the hypervisor (because the RDMSR is actually intercepted) in the guest/VM case, resulting in a failed boot. And since this is very early in the boot phase, rdmsrl_safe()/native_read_msr_safe() can't be used. So check the CPUID bits first, before accessing the MSR. [ tlendacky: Expand and improve commit message. ] [ bp: Massage commit message. ] Fixes: eab696d8e8b9 ("x86/sev: Do not require Hypervisor CPUID bit for SEV guests") Signed-off-by: Pu Wen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Tom Lendacky <[email protected]> Cc: <[email protected]> # v5.10+ Link: https://lkml.kernel.org/r/[email protected]
2021-06-04Merge tag 'drm-fixes-2021-06-04-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds22-99/+240
Pull drm fixes from Dave Airlie: "Two big regression reverts in here, one for fbdev and one i915. Otherwise it's mostly amdgpu display fixes, and tegra fixes. fb: - revert broken fb_defio patch amdgpu: - Display fixes - FRU EEPROM error handling fix - RAS fix - PSP fix - Releasing pinned BO fix i915: - Revert conversion to io_mapping_map_user() which lead to BUG_ON() - Fix check for error valued returns in a selftest tegra: - SOR power domain race condition fix - build warning fix - runtime pm ref leak fix - modifier fix" * tag 'drm-fixes-2021-06-04-1' of git://anongit.freedesktop.org/drm/drm: amd/display: convert DRM_DEBUG_ATOMIC to drm_dbg_atomic drm/amdgpu: make sure we unpin the UVD BO drm/amd/amdgpu:save psp ring wptr to avoid attack drm/amd/display: Fix potential memory leak in DMUB hw_init drm/amdgpu: Don't query CE and UE errors drm/amd/display: Fix overlay validation by considering cursors drm/amdgpu: refine amdgpu_fru_get_product_info drm/amdgpu: add judgement for dc support drm/amd/display: Fix GPU scaling regression by FS video support drm/amd/display: Allow bandwidth validation for 0 streams. Revert "i915: use io_mapping_map_user" drm/i915/selftests: Fix return value check in live_breadcrumbs_smoketest() Revert "fb_defio: Remove custom address_space_operations" drm/tegra: Correct DRM_FORMAT_MOD_NVIDIA_SECTOR_LAYOUT drm/tegra: sor: Fix AUX device reference leak drm/tegra: Get ref for DP AUX channel, not its ddc adapter drm/tegra: Fix shift overflow in tegra_shared_plane_atomic_update drm/tegra: sor: Fully initialize SOR before registration gpu: host1x: Split up client initalization and registration drm/tegra: sor: Do not leak runtime PM reference
2021-06-04virtchnl: Add missing padding to virtchnl_proto_hdrsGeert Uytterhoeven1-0/+1
On m68k (Coldfire M547x): CC drivers/net/ethernet/intel/i40e/i40e_main.o In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9, from drivers/net/ethernet/intel/i40e/i40e.h:41, from drivers/net/ethernet/intel/i40e/i40e_main.c:12: include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero] 153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) } | ^ include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’ 844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant 844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); | ^~~~~~~~~~~~~~~~~~~ On m68k, integers are aligned on addresses that are multiples of two, not four, bytes. Hence the size of a structure containing integers may not be divisible by 4. Fix this by adding explicit padding. Fixes: 1f7ea1cd6a374842 ("ice: Enable FDIR Configure for AVF") Reported-by: kernel test robot <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04ice: Allow all LLDP packets from PF to TxDave Ertman1-1/+4
Currently in the ice driver, the check whether to allow a LLDP packet to egress the interface from the PF_VSI is being based on the SKB's priority field. It checks to see if the packets priority is equal to TC_PRIO_CONTROL. Injected LLDP packets do not always meet this condition. SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL (0x0003) and does not set the priority field. There will be other injection methods (even ones used by end users) that will not correctly configure the socket so that SKB fields are correctly populated. Then ethernet header has to have to correct value for the protocol though. Add a check to also allow packets whose ethhdr->h_proto matches ETH_P_LLDP (0x88CC). Fixes: 0c3a6101ff2d ("ice: Allow egress control packets from PF_VSI") Signed-off-by: Dave Ertman <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04ice: report supported and advertised autoneg using PHY capabilitiesPaul Greenwalt1-45/+6
Ethtool incorrectly reported supported and advertised auto-negotiation settings for a backplane PHY image which did not support auto-negotiation. This can occur when using media or PHY type for reporting ethtool supported and advertised auto-negotiation settings. Remove setting supported and advertised auto-negotiation settings based on PHY type in ice_phy_type_to_ethtool(), and MAC type in ice_get_link_ksettings(). Ethtool supported and advertised auto-negotiation settings should be based on the PHY image using the AQ command get PHY capabilities with media. Add setting supported and advertised auto-negotiation settings based get PHY capabilities with media in ice_get_link_ksettings(). Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04ice: handle the VF VSI rebuild failureHaiyue Wang1-1/+6
VSI rebuild can be failed for LAN queue config, then the VF's VSI will be NULL, the VF reset should be stopped with the VF entering into the disable state. Fixes: 12bb018c538c ("ice: Refactor VF reset") Signed-off-by: Haiyue Wang <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04ice: Fix VFR issues for AVF drivers that expect ATQLEN clearedBrett Creeley2-5/+8
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the same time as VF_MBX_ARQLEN. Fixes: 82ba01282cf8 ("ice: clear VF ARQLEN register on reset") Signed-off-by: Brett Creeley <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04ice: Fix allowing VF to request more/less queues via virtchnlBrett Creeley1-0/+2
Commit 12bb018c538c ("ice: Refactor VF reset") caused a regression that removes the ability for a VF to request a different amount of queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to either increase or decrease the number of queue pairs they are allocated. Fix this by using the variable vf->num_req_qs when determining the vf->num_vf_qs during VF VSI creation. Fixes: 12bb018c538c ("ice: Refactor VF reset") Signed-off-by: Brett Creeley <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-04perf env: Fix memory leak of bpf_prog_info_linear memberRiccardo Mancini1-0/+1
ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-04x86/fault: Don't send SIGSEGV twice on SEGV_PKUERRJiashuo Liang1-2/+2
__bad_area_nosemaphore() calls both force_sig_pkuerr() and force_sig_fault() when handling SEGV_PKUERR. This does not cause problems because the second signal is filtered by the legacy_queue() check in __send_signal() because in both cases, the signal is SIGSEGV, the second one seeing that the first one is already pending. This causes the kernel to do unnecessary work so send the signal only once for SEGV_PKUERR. [ bp: Massage commit message. ] Fixes: 9db812dbb29d ("signal/x86: Call force_sig_pkuerr from __bad_area_nosemaphore") Suggested-by: "Eric W. Biederman" <[email protected]> Signed-off-by: Jiashuo Liang <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: "Eric W. Biederman" <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-06-04perf symbol-elf: Fix memory leak by freeing sdt_note.argsRiccardo Mancini1-0/+1
Reported by ASan. Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Cc: Jiri Slaby <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-04perf stat: Honor event config name on --no-mergeNamhyung Kim1-5/+3
If user gave an event name explicitly, it should be displayed in the output as is. But with --no-merge option it adds a pmu name at the end so might confuse users. Actually this is true for hybrid pmus, I think we should do the same for others. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-04perf evsel: Add missing cloning of evsel->use_config_nameNamhyung Kim2-2/+3
The evsel__clone() should copy all fields in the evsel which are set during the event parsing. But it missed the use_config_name field. Fixes: 12279429d862 ("perf stat: Uniquify hybrid event name") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-04debugfs: Fix debugfs_read_file_str()Dietmar Eggemann1-1/+1
Read the entire size of the buffer, including the trailing new line character. Discovered while reading the sched domain names of CPU0: before: cat /sys/kernel/debug/sched/domains/cpu0/domain*/name SMTMCDIE after: cat /sys/kernel/debug/sched/domains/cpu0/domain*/name SMT MC DIE Fixes: 9af0440ec86eb ("debugfs: Implement debugfs_create_str()") Reviewed-by: Steven Rostedt (VMware) <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Dietmar Eggemann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04ASoC: rt5682: Fix the fast discharge for headset unplugging in soundwire modeOder Chiou1-1/+2
Based on ("5a15cd7fce20b1fd4aece6a0240e2b58cd6a225d"), the setting also should be set in soundwire mode. Signed-off-by: Oder Chiou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-06-04USB: UDC: Implement udc_async_callbacks in net2272Alan Stern2-14/+28
This patch adds a udc_async_callbacks handler to the net2272 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2272 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04USB: UDC: Implement udc_async_callbacks in net2280Alan Stern2-17/+33
This patch adds a udc_async_callbacks handler to the net2280 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2280 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04USB: UDC: Implement udc_async_callbacks in dummy-hcdAlan Stern1-1/+10
This patch adds a udc_async_callbacks handler to the dummy-hcd UDC driver, which will prevent a theoretical race during gadget unbinding. The implementation is simple, since dummy-hcd already has a flag to keep track of whether emulated IRQs are enabled. All the handler has to do is store the enable value in the flag, and avoid setting the flag prematurely. Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04USB: UDC core: Add udc_async_callbacks gadget opAlan Stern2-0/+50
The Gadget API has a theoretical race when a gadget driver is unbound. Although the pull-up is turned off before the driver's ->unbind callback runs, if the USB cable were to be unplugged at just the wrong moment there would be nothing to prevent the UDC driver from invoking the ->disconnect callback after the unbind has finished. In theory, other asynchronous callbacks could also happen during the time before the UDC driver's udc_stop routine is called, and the gadget driver would not be prepared to handle any of them. We need a way to tell UDC drivers to stop issuing asynchronous (that is, ->suspend, ->resume, ->disconnect, ->reset, or ->setup) callbacks at some point after the pull-up has been turned off and before the ->unbind callback runs. This patch adds a new ->udc_async_callbacks callback to the usb_gadget_ops structure for precisely this purpose, and it adds the corresponding support to the UDC core. Later patches in this series add support for udc_async_callbacks to several UDC drivers. Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04doc: dt-binding: cdns,usb3: Add interrupt-names property under requiredAswath Govindraju1-0/+1
In the driver the interrupts are fetched by name. Therefore, add interrupt names in the list of required properties Fixes: 68989fe1c39d ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Signed-off-by: Aswath Govindraju <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: gadget: f_fs: Ensure io_completion_wq is idle during unbindWesley Cheng1-0/+3
During unbind, ffs_func_eps_disable() will be executed, resulting in completion callbacks for any pending USB requests. When using AIO, irrespective of the completion status, io_data work is queued to io_completion_wq to evaluate and handle the completed requests. Since work runs asynchronously to the unbind() routine, there can be a scenario where the work runs after the USB gadget has been fully removed, resulting in accessing of a resource which has been already freed. (i.e. usb_ep_free_request() accessing the USB ep structure) Explicitly drain the io_completion_wq, instead of relying on the destroy_workqueue() (in ffs_data_put()) to make sure no pending completion work items are running. Signed-off-by: Wesley Cheng <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: cancel send discover hrtimer when unregister tcpm portLi Jun1-0/+1
Like the state_machine_timer, we should also cancel possible pending send discover identity hrtimer when unregister tcpm port. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Reviewed-by: Guenter Roeck <[email protected]> Cc: stable <[email protected]> Signed-off-by: Li Jun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: cancel frs hrtimer when unregister tcpm portLi Jun1-0/+1
Like the state_machine_timer, we should also cancel possible pending frs hrtimer when unregister tcpm port. Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Cc: stable <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Li Jun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm portLi Jun1-0/+3
A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 111.843729] cpu_startup_entry+0x2c/0x70 [ 111.847657] rest_init+0xdc/0xec [ 111.850890] arch_call_rest_init+0x14/0x20 [ 111.854988] start_kernel+0x508/0x540 [ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827) [ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]--- [ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 111.876258] SMP: stopping secondary CPUs [ 111.880185] Kernel Offset: disabled [ 111.883673] CPU features: 0x00001001,20000846 [ 111.888031] Memory Limit: none [ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") Cc: stable <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Li Jun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: Properly handle Alert and Status MessagesKyle Tso2-29/+27
When receiving Alert Message, if it is not unexpected but is unsupported for some reason, the port should return Not_Supported Message response. Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the OTP/OVP/OCP flags in the Event Flags field in Status Message no longer require Get_PPS_Status Message to clear them. Thus remove it when receiving Status Message with those flags being set. In addition, add the missing AMS operations for Status Message. Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages") Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04btrfs: promote debugging asserts to full-fledged checks in validate_superNikolay Borisov1-8/+18
Syzbot managed to trigger this assert while performing its fuzzing. Turns out it's better to have those asserts turned into full-fledged checks so that in case buggy btrfs images are mounted the users gets an error and mounting is stopped. Alternatively with CONFIG_BTRFS_ASSERT disabled such image would have been erroneously allowed to be mounted. Reported-by: [email protected] CC: [email protected] # 5.4+ Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Reviewed-by: David Sterba <[email protected]> [ add uuids to the messages ] Signed-off-by: David Sterba <[email protected]>
2021-06-04btrfs: return value from btrfs_mark_extent_written() in case of errorRitesh Harjani1-2/+2
We always return 0 even in case of an error in btrfs_mark_extent_written(). Fix it to return proper error value in case of a failure. All callers handle it. CC: [email protected] # 4.4+ Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-06-04btrfs: zoned: fix zone number to sector/physical calculationNaohiro Aota1-5/+18
In btrfs_get_dev_zone_info(), we have "u32 sb_zone" and calculate "sector_t sector" by shifting it. But, this "sector" is calculated in 32bit, leading it to be 0 for the 2nd superblock copy. Since zone number is u32, shifting it to sector (sector_t) or physical address (u64) can easily trigger a missing cast bug like this. This commit introduces helpers to convert zone number to sector/LBA, so we won't fall into the same pitfall again. Reported-by: Dmitry Fomichev <[email protected]> Fixes: 12659251ca5d ("btrfs: implement log-structured superblock for ZONED mode") CC: [email protected] # 5.11+ Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Naohiro Aota <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-06-04btrfs: do not write supers if we have an fs errorJosef Bacik1-0/+16
Error injection testing uncovered a pretty severe problem where we could end up committing a super that pointed to the wrong tree roots, resulting in transid mismatch errors. The way we commit the transaction is we update the super copy with the current generations and bytenrs of the important roots, and then copy that into our super_for_commit. Then we allow transactions to continue again, we write out the dirty pages for the transaction, and then we write the super. If the write out fails we'll bail and skip writing the supers. However since we've allowed a new transaction to start, we can have a log attempting to sync at this point, which would be blocked on fs_info->tree_log_mutex. Once the commit fails we're allowed to do the log tree commit, which uses super_for_commit, which now points at fs tree's that were not written out. Fix this by checking BTRFS_FS_STATE_ERROR once we acquire the tree_log_mutex. This way if the transaction commit fails we're sure to see this bit set and we can skip writing the super out. This patch fixes this specific transid mismatch error I was seeing with this particular error path. CC: [email protected] # 5.12+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-06-04usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabledNeil Armstrong1-1/+4
When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ... Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately") Reviewed-by: Martin Blumenstingl <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: dwc3: meson-g12a: Disable the regulator in the error handling path of ↵Christophe JAILLET1-2/+6
the probe If an error occurs after a successful 'regulator_enable()' call, 'regulator_disable()' must be called. Fix the error handling path of the probe accordingly. The remove function doesn't need to be fixed, because the 'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()' which is called via 'pm_runtime_set_suspended()' in the remove function. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Reviewed-by: Martin Blumenstingl <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04Merge tag 'phy-fixes-5.13' of ↵Greg Kroah-Hartman6-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus Vinod writes: phy: fixes for 5.13 Phy driver fixes for few drivers: cadence, mtk-tphy, sparx5, wiz mostly fixing error code and checking return codes etc * tag 'phy-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
2021-06-04usb: typec: tcpm: Fix misuses of AMS invocationKyle Tso1-6/+5
tcpm_ams_start is used to initiate an AMS as well as checking Collision Avoidance conditions but not for flagging passive AMS (initiated by the port partner). Fix the misuses of tcpm_ams_start in tcpm_pd_svdm. ATTENTION doesn't need responses so the AMS flag is not needed here. Fixes: 0bc3ee92880d ("usb: typec: tcpm: Properly interrupt VDM AMS") Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: Introduce snk_vdo_v1 for SVDM version 1.0Kyle Tso1-12/+28
The ID Header VDO and Product VDOs defined in USB PD Spec rev 2.0 and rev 3.1 are quite different. Add an additional array snk_vdo_v1 and send it as the response to the port partner if it only supports SVDM version 1.0. Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04dt-bindings: connector: Add PD rev 2.0 VDO definitionKyle Tso2-3/+81
Add the VDO definition for USB PD rev 2.0 in the bindings and define a new property snk-vdos-v1 containing legacy VDOs as the responses to the port partner which only supports PD rev 2.0. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04usb: typec: tcpm: Correct the responses in SVDM Version 2.0 DFPKyle Tso1-4/+10
In USB PD Spec Rev 3.1 Ver 1.0, section "6.12.5 Applicability of Structured VDM Commands", DFP is allowed and recommended to respond to Discovery Identity with ACK. And in section "6.4.4.2.5.1 Commands other than Attention", NAK should be returned only when receiving Messages with invalid fields, Messages in wrong situation, or unrecognize Messages. Still keep the original design for SVDM Version 1.0 for backward compatibilities. Fixes: 193a68011fdc ("staging: typec: tcpm: Respond to Discover Identity commands") Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04Revert "usb: dwc3: core: Add shutdown callback for dwc3"Alexandru Elisei1-6/+0
This reverts commit 568262bf5492a9bb2fcc4c204b8d38fd6be64e28. The commit causes the following panic when shutting down a rockpro64-v2 board: [..] [ 41.684569] xhci-hcd xhci-hcd.2.auto: USB bus 1 deregistered [ 41.686301] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 41.687096] Mem abort info: [ 41.687345] ESR = 0x96000004 [ 41.687615] EC = 0x25: DABT (current EL), IL = 32 bits [ 41.688082] SET = 0, FnV = 0 [ 41.688352] EA = 0, S1PTW = 0 [ 41.688628] Data abort info: [ 41.688882] ISV = 0, ISS = 0x00000004 [ 41.689219] CM = 0, WnR = 0 [ 41.689481] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000073b2000 [ 41.690046] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [ 41.690654] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 41.691143] Modules linked in: [ 41.691416] CPU: 5 PID: 1 Comm: shutdown Not tainted 5.13.0-rc4 #43 [ 41.691966] Hardware name: Pine64 RockPro64 v2.0 (DT) [ 41.692409] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 41.692937] pc : down_read_interruptible+0xec/0x200 [ 41.693373] lr : simple_recursive_removal+0x48/0x280 [ 41.693815] sp : ffff800011fab910 [ 41.694107] x29: ffff800011fab910 x28: ffff0000008fe480 x27: ffff0000008fe4d8 [ 41.694736] x26: ffff800011529a90 x25: 00000000000000a0 x24: ffff800011edd030 [ 41.695364] x23: 0000000000000080 x22: 0000000000000000 x21: ffff800011f23994 [ 41.695992] x20: ffff800011f23998 x19: ffff0000008fe480 x18: ffffffffffffffff [ 41.696620] x17: 000c0400bb44ffff x16: 0000000000000009 x15: ffff800091faba3d [ 41.697248] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000020 [ 41.697875] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 6f6c746364716e62 [ 41.698502] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff6364626d x6 : 0000000000000440 [ 41.699130] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000000a0 [ 41.699758] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000000000a0 [ 41.700386] Call trace: [ 41.700602] down_read_interruptible+0xec/0x200 [ 41.701003] debugfs_remove+0x5c/0x80 [ 41.701328] dwc3_debugfs_exit+0x1c/0x6c [ 41.701676] dwc3_remove+0x34/0x1a0 [ 41.701988] platform_remove+0x28/0x60 [ 41.702322] __device_release_driver+0x188/0x22c [ 41.702730] device_release_driver+0x2c/0x44 [ 41.703106] bus_remove_device+0x124/0x130 [ 41.703468] device_del+0x16c/0x424 [ 41.703777] platform_device_del.part.0+0x1c/0x90 [ 41.704193] platform_device_unregister+0x28/0x44 [ 41.704608] of_platform_device_destroy+0xe8/0x100 [ 41.705031] device_for_each_child_reverse+0x64/0xb4 [ 41.705470] of_platform_depopulate+0x40/0x84 [ 41.705853] __dwc3_of_simple_teardown+0x20/0xd4 [ 41.706260] dwc3_of_simple_shutdown+0x14/0x20 [ 41.706652] platform_shutdown+0x28/0x40 [ 41.706998] device_shutdown+0x158/0x330 [ 41.707344] kernel_power_off+0x38/0x7c [ 41.707684] __do_sys_reboot+0x16c/0x2a0 [ 41.708029] __arm64_sys_reboot+0x28/0x34 [ 41.708383] invoke_syscall+0x48/0x114 [ 41.708716] el0_svc_common.constprop.0+0x44/0xdc [ 41.709131] do_el0_svc+0x28/0x90 [ 41.709426] el0_svc+0x2c/0x54 [ 41.709698] el0_sync_handler+0xa4/0x130 [ 41.710045] el0_sync+0x198/0x1c0 [ 41.710342] Code: c8047c62 35ffff84 17fffe5f f9800071 (c85ffc60) [ 41.710881] ---[ end trace 406377df5178f75c ]--- [ 41.711299] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 41.712084] Kernel Offset: disabled [ 41.712391] CPU features: 0x10001031,20000846 [ 41.712775] Memory Limit: none [ 41.713049] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- As Felipe explained: "dwc3_shutdown() is just called dwc3_remove() directly, then we end up calling debugfs_remove_recursive() twice." Reverting the commit fixes the panic. Fixes: 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alexandru Elisei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04dt-bindings: connector: Replace BIT macro with generic bit opsKyle Tso1-10/+10
BIT macro is not defined. Replace it with generic bit operations. Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties") Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-04Merge tag 'drm/tegra/for-5.13-rc5' of ↵Dave Airlie5-42/+92
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes drm/tegra: Fixes for v5.13-rc5 The most important change here fixes a race condition that causes either HDA or (more frequently) display to malfunction because they race for enabling the SOR power domain at probe time. Other than that, there's a couple of build warnings for issues introduced in v5.13 as well as some minor fixes, such as reference leak plugs. Signed-off-by: Dave Airlie <[email protected]> From: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-04Merge tag 'amd-drm-fixes-5.13-2021-06-02' of ↵Dave Airlie9-50/+52
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-02: amdgpu: - Display fixes - FRU EEPROM error handling fix - RAS fix - PSP fix - Releasing pinned BO fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-03Merge tag 'for-net-2021-06-03' of ↵David S. Miller4-6/+30
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fixes UAF and CVE-2021-3564 - Fix VIRTIO_ID_BT to use an unassigned ID - Fix firmware loading on some Intel Controllers Signed-off-by: David S. Miller <[email protected]>
2021-06-03virtio-net: fix for skb_over_panic inside big modeXuan Zhuo1-1/+1
In virtio-net's large packet mode, there is a hole in the space behind buf. hdr_padded_len - hdr_len We must take this into account when calculating tailroom. [ 44.544385] skb_put.cold (net/core/skbuff.c:5254 (discriminator 1) net/core/skbuff.c:5252 (discriminator 1)) [ 44.544864] page_to_skb (drivers/net/virtio_net.c:485) [ 44.545361] receive_buf (drivers/net/virtio_net.c:849 drivers/net/virtio_net.c:1131) [ 44.545870] ? netif_receive_skb_list_internal (net/core/dev.c:5714) [ 44.546628] ? dev_gro_receive (net/core/dev.c:6103) [ 44.547135] ? napi_complete_done (./include/linux/list.h:35 net/core/dev.c:5867 net/core/dev.c:5862 net/core/dev.c:6565) [ 44.547672] virtnet_poll (drivers/net/virtio_net.c:1427 drivers/net/virtio_net.c:1525) [ 44.548251] __napi_poll (net/core/dev.c:6985) [ 44.548744] net_rx_action (net/core/dev.c:7054 net/core/dev.c:7139) [ 44.549264] __do_softirq (./arch/x86/include/asm/jump_label.h:19 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:560) [ 44.549762] irq_exit_rcu (kernel/softirq.c:433 kernel/softirq.c:637 kernel/softirq.c:649) [ 44.551384] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 13)) [ 44.551991] ? asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) [ 44.552654] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <[email protected]> Reported-by: Corentin Noël <[email protected]> Tested-by: Corentin Noël <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-03Merge tag 'ieee802154-for-davem-2021-06-03' of ↵David S. Miller4-11/+16
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== An update from ieee802154 for your *net* tree. This time we have fixes for the ieee802154 netlink code, as well as a driver fix. Zhen Lei, Wei Yongjun and Yang Li each had a patch to cleanup some return code handling ensuring we actually get a real error code when things fails. Dan Robertson fixed a potential null dereference in our netlink handling. Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-03ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptionsCoco Li1-2/+6
Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9 RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60 R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000 Allocated by task 17768: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:427 [inline] ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506 kasan_kmalloc include/linux/kasan.h:233 [inline] __kmalloc+0xb4/0x380 mm/slub.c:4055 kmalloc include/linux/slab.h:559 [inline] kzalloc include/linux/slab.h:684 [inline] fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 __call_rcu kernel/rcu/tree.c:3039 [inline] call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114 fib6_info_release include/net/ip6_fib.h:337 [inline] ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 insert_work+0x54/0x400 kernel/workqueue.c:1331 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497 queue_work_on+0x111/0x200 kernel/workqueue.c:1524 queue_work include/linux/workqueue.h:507 [inline] call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline] kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120 __fput+0x352/0x7b0 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880145c7800 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 56 bytes to the right of 192-byte region [ffff8880145c7800, ffff8880145c78c0) The buggy address belongs to the page: page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== In the ip6_route_info_create function, in the case that the nh pointer is not NULL, the fib6_nh in fib6_info has not been allocated. Therefore, when trying to free fib6_info in this error case using fib6_info_release, the function will call fib6_info_destroy_rcu, which it will access fib6_nh_release(f6i->fib6_nh); However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation causing the reported memory issue above. Therefore, releasing the empty pointer directly instead would be the solution. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec91916462 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by: Coco Li <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-03Merge tag 'wireless-drivers-2021-06-03' of ↵David S. Miller11-30/+138
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.13 We have only mt76 fixes this time, most important being the fix for A-MSDU injection attacks. mt76 * mitigate A-MSDU injection attacks (CVE-2020-24588) * fix possible array out of bound access in mt7921_mcu_tx_rate_report * various aggregation and HE setting fixes * suspend/resume fix for pci devices * mt7615: fix crash when runtime-pm is not supported ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-03fib: Return the correct errno codeZheng Yongjun1-1/+1
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.