aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-27sh_eth: uninline TSU register accessorsSergei Shtylyov2-11/+11
We have uninlined the sh_eth_{read|write}() functions introduced in the commit 4a55530f38e ("net: sh_eth: modify the definitions of register"). Now remove *inline* from sh_eth_tsu_{read|write}() as well and move these functions from the header to the driver itself. This saves 684 more bytes of object code (ARM gcc 4.8.5)... Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27Merge branch 'tunnel-mtu-fixes'David S. Miller3-9/+15
Xin Long says: ==================== net: fix IFLA_MTU ignored on NEWLINK for some ip and ipv6 tunnels The fix for ip_gre follows the way other ip tunnels do: not to set mtu in ndo_init, as ip_tunnel_newlink will take care of it properly. The fix for ip6_tunnel and sit follows the way ipv6 tunenls do: to set mtu again according to IFLA_MTU after, as all bind_dev are called in ndo_init where it can't get the tb[IFLA_MTU]. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-27sit: fix IFLA_MTU ignored on NEWLINKXin Long1-0/+7
Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27ip6_tunnel: fix IFLA_MTU ignored on NEWLINKXin Long1-4/+8
Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for ip6_tunnel. Note that dev->hard_header_len setting for ip6_tunnel works fine, no need to fix it. Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27ip_gre: fix IFLA_MTU ignored on NEWLINKXin Long1-5/+0
It's safe to remove the setting of dev's needed_headroom and mtu in __gre_tunnel_init, as discussed in [1], ip_tunnel_newlink can do it properly. Now Eric noticed that it could cover the mtu value set in do_setlink when creating a ip_gre dev. It makes IFLA_MTU param not take effect. So this patch is to remove them to make IFLA_MTU work, as in other ipv4 tunnels. [1]: https://patchwork.ozlabs.org/patch/823504/ Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Reported-by: Eric Garver <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27net: phy: Restore phy_resume() locking assumptionAndrew Lunn3-6/+15
commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit <[email protected]> Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27netfilter: nf_tables: use the right index from flowtable error pathPablo Neira Ayuso1-1/+1
Use the right loop index, not the number of devices in the array that we need to remove, the following message uncovered the problem: [ 5437.044119] hook not found, pf 5 num 0 [ 5437.044140] WARNING: CPU: 2 PID: 24983 at net/netfilter/core.c:376 __nf_unregister_net_hook+0x250/0x280 Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-27tipc: correct initial value for group congestion flagJon Maloy2-0/+2
In commit 60c253069632 ("tipc: fix race between poll() and setsockopt()") we introduced a pointer from struct tipc_group to the 'group_is_connected' flag in struct tipc_sock, so that this field can be checked without dereferencing the group pointer of the latter struct. The initial value for this flag is correctly set to 'false' when a group is created, but we miss the case when no group is created at all, in which case the initial value should be 'true'. This has the effect that SOCK_RDM/DGRAM sockets sending datagrams never receive POLLOUT if they request so. This commit corrects this bug. Fixes: 60c253069632 ("tipc: fix race between poll() and setsockopt()") Reported-by: Hoang Le <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27devlink: Fix resource coverity errorsArkadi Sharshevsky1-16/+21
Fix resource coverity errors. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Arkadi Sharshevsky <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68Sabrina Dubroca1-2/+6
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Sabrina Dubroca <[email protected]> Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27Merge branch 'for-upstream' of ↵David S. Miller2-9/+23
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2018-02-26 Here are a two Bluetooth driver fixes for the 4.16 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-27devlink: Compare to size_new in case of resource child validationArkadi Sharshevsky1-1/+1
The current implementation checks the combined size of the children with the 'size' of the parent. The correct behavior is to check the combined size vs the pending change and to compare vs the 'size_new'. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Arkadi Sharshevsky <[email protected]> Tested-by: Yuval Mintz <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27cfg80211: add missing dependency to CFG80211 suboptionsRomain Naour1-8/+5
New options introduced by the patch this fixes are still enabled even if CFG80211 is disabled. .config: # CONFIG_CFG80211 is not set CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y # CONFIG_LIB80211 is not set When CFG80211_REQUIRE_SIGNED_REGDB is enabled, it selects SYSTEM_DATA_VERIFICATION which selects SYSTEM_TRUSTED_KEYRING that need extract-cert tool. extract-cert needs some openssl headers to be installed on the build machine. Instead of adding missing "depends on CFG80211", it's easier to use a 'if' block around all options related to CFG80211, so do that. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Romain Naour <[email protected]> [touch up commit message a bit] Signed-off-by: Johannes Berg <[email protected]>
2018-02-27netfilter: nf_tables: missing attribute validation in nf_tables_delflowtable()Pablo Neira Ayuso1-0/+5
Return -EINVAL is mandatory attributes are missing. Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-27netfilter: nf_tables: return EBUSY if device already belongs to flowtablePablo Neira Ayuso1-1/+17
If the netdevice is already part of a flowtable, return EBUSY. I cannot find a valid usecase for having two flowtables bound to the same netdevice. We can still have two flowtable where the device set is disjoint. Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-26bpf, ppc64: fix out of bounds access in tail callDaniel Borkmann1-0/+1
While working on 16338a9b3ac3 ("bpf, arm64: fix out of bounds access in tail call") I noticed that ppc64 JIT is partially affected as well. While the bound checking is correctly performed as unsigned comparison, the register with the index value however, is never truncated into 32 bit space, so e.g. a index value of 0x100000000ULL with a map of 1 element would pass with PPC_CMPLW() whereas we later on continue with the full 64 bit register value. Therefore, as we do in interpreter and other JITs truncate the value to 32 bit initially in order to fix access. Fixes: ce0761419fae ("powerpc/bpf: Implement support for tail calls") Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Naveen N. Rao <[email protected]> Tested-by: Naveen N. Rao <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-02-26r8152: fix tx packets accountingEric Dumazet1-1/+1
r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26ip_tunnel: Do not use mark in skb by defaultThomas Winter1-10/+3
This reverts commit 5c38bd1b82e1f76f9fa96c1e61c9897cabf1ce45. skb->mark contains the mark the encapsulated traffic which can result in incorrect routing decisions being made such as routing loops if the route chosen is via tunnel itself. The correct method should be to use tunnel->fwmark. Signed-off-by: Thomas Winter <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Alexey Kuznetsov <[email protected]> Cc: Hideaki YOSHIFUJI <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26bridge: Fix VLAN reference count problemIdo Schimmel1-0/+2
When a VLAN is added on a port, a reference is taken on the corresponding master VLAN entry. If it does not already exist, then it is created and a reference taken. However, in the second case a reference is not really taken when CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by refcount_inc_not_zero(). Fix this by using refcount_set() on a newly created master VLAN entry. Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t") Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26DT: net: renesas,ravb: document R8A77980 bindingsSergei Shtylyov1-0/+1
Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26qrtr: add MODULE_ALIAS macro to smdRamon Fried1-0/+1
Added MODULE_ALIAS("rpmsg:IPCRTR") to ensure qrtr-smd and qrtr will load when IPCRTR channel is detected. Signed-off-by: Ramon Fried <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26test_bpf: add a schedule pointEric Dumazet1-0/+2
test_bpf() is taking 1.6 seconds nowadays, it is time to add a schedule point in it. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-26hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du1-1/+4
Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26tuntap: correctly add the missing XDP flushJason Wang1-0/+1
We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by: Christoffer Dall <[email protected]> Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26tuntap: disable preemption during XDP processingJason Wang1-0/+6
Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26Revert "tuntap: add missing xdp flush"Jason Wang1-15/+0
This reverts commit 762c330d670e3d4b795cf7a8d761866fdd1eef49. The reason is we try to batch packets for devmap which causes calling xdp_do_flush() in the process context. Simply disabling preemption may not work since process may move among processors which lead xdp_do_flush() to miss some flushes on some processors. So simply revert the patch, a follow-up patch will add the xdp flush correctly. Reported-by: Christoffer Dall <[email protected]> Fixes: 762c330d670e ("tuntap: add missing xdp flush") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26ixgbe: fix crash in build_skb Rx code pathEmil Tantilov1-0/+8
Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <[email protected]> Reported-by: Ambarish Soman <[email protected]> Suggested-by: Alexander Duyck <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26ARM: orion5x: Revert commit 4904dbda41c8.David S. Miller3-10/+95
It is not valid for orion5x to use mac_pton(). First of all, the orion5x buffer is not NULL terminated. mac_pton() has no business operating on non-NULL terminated buffers because only the caller can know that this is valid and in what manner it is ok to parse this NULL'less buffer. Second of all, orion5x operates on an __iomem pointer, which cannot be dereferenced using normal C pointer operations. Accesses to such areas much be performed with the proper iomem accessors. Fixes: 4904dbda41c8 ("ARM: orion5x: use mac_pton() helper") Signed-off-by: David S. Miller <[email protected]>
2018-02-26Merge branch 'l2tp-fix-API-races-discovered-by-syzbot'David S. Miller5-166/+77
James Chapman says: ==================== l2tp: fix API races discovered by syzbot This patch series addresses several races with L2TP APIs discovered by syzbot. There are no functional changes. The set of patches 1-5 in combination fix the following syzbot reports. 19c09769f WARNING in debug_print_object 347bd5acd KASAN: use-after-free Read in inet_shutdown 6e6a5ec8d general protection fault in pppol2tp_connect 9df43faf0 KASAN: use-after-free Read in pppol2tp_connect My first attempts to fix these issues were as net-next patches but the series included other refactoring and cleanup work. I was asked to separate out the bugfixes and redo for the net tree, which is what these patches are. The changes are: 1. Fix inet_shutdown races when L2TP tunnels and sessions close. (patches 1-2) 2. Fix races with tunnel and its socket. (patch 3) 3. Fix race in pppol2tp_release with session and its socket. (patch 4) 4. Fix tunnel lookup use-after-free. (patch 5) All of the syzbot reproducers hit races in the tunnel and pppol2tp session create and destroy paths. These tests create and destroy pppol2tp tunnels and sessions rapidly using multiple threads, provoking races in several tunnel/session create/destroy paths. The key problem was that each tunnel/session socket could be destroyed while its associated tunnel/session object still existed (patches 3, 4). Patch 5 addresses a problem with the way tunnels are removed from the tunnel list. Patch 5 is tagged that it addresses all four syzbot issues, though all 5 patches are needed. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix tunnel lookup use-after-free raceJames Chapman1-7/+7
l2tp_tunnel_get walks the tunnel list to find a matching tunnel instance and if a match is found, its refcount is increased before returning the tunnel pointer. But when tunnel objects are destroyed, they are on the tunnel list after their refcount hits zero. Fix this by moving the code that removes the tunnel from the tunnel list from the tunnel socket destructor into in the l2tp_tunnel_delete path, before the tunnel refcount is decremented. refcount_t: increment on 0; use-after-free. WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50 Modules linked in: CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:refcount_inc+0x47/0x50 RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286 RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8 RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50 R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004 FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0 Call Trace: l2tp_tunnel_get+0x2dd/0x4e0 pppol2tp_connect+0x428/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f403a42f259 RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259 RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004 RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000 R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000 R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040 Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue") Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix race in pppol2tp_release with session object destroyJames Chapman1-25/+27
pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix races with tunnel socket closeJames Chapman4-116/+42
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: don't use inet_shutdown on ppp session destroyJames Chapman1-10/+0
Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: don't use inet_shutdown on tunnel destroyJames Chapman1-9/+2
Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-25Bluetooth: hci_bcm: Make shutdown and device wake GPIO optionalStefan Wahren1-3/+4
According to the devicetree binding the shutdown and device wake GPIOs are optional. Since commit 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") this driver won't probe anymore on Raspberry Pi 3 and Zero W (no device wake GPIO connected). So fix this regression by reverting this commit partially. Fixes: 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Lukas Wunner <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2018-02-25Bluetooth: btusb: Use DMI matching for QCA reset_resume quirkingHans de Goede1-6/+19
Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: [email protected] Cc: Brian Norris <[email protected]> Cc: Kai-Heng Feng <[email protected]> Reported-and-tested-by: Kevin Fenzi <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2018-02-25netfilter: use skb_to_full_sk in ip6_route_me_harderEric Dumazet1-4/+5
For some reason, Florian forgot to apply to ip6_route_me_harder the fix that went in commit 29e09229d9f2 ("netfilter: use skb_to_full_sk in ip_route_me_harder") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")  Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann5-21/+31
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25netfilter: don't set F_IFACE on ipv6 fib lookupsFlorian Westphal2-14/+2
"fib" starts to behave strangely when an ipv6 default route is added - the FIB lookup returns a route using 'oif' in this case. This behaviour was inherited from ip6tables rpfilter so change this as well. Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1221 Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: increase IPSTATS_MIB_CSUMERRORS statTaehee Yoo1-1/+3
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when checksum error is occurred. bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25batman-adv: Fix netlink dumping of BLA backbonesSven Eckelmann1-4/+7
The function batadv_bla_backbone_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: ea4152e11716 ("batman-adv: add backbone table netlink support") Reported-by: Linus Lüssing <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25batman-adv: Fix netlink dumping of BLA claimsSven Eckelmann1-4/+7
The function batadv_bla_claim_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: 04f3f5bf1883 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink") Reported-by: Linus Lüssing <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25batman-adv: Ignore invalid batadv_v_gw during netlink sendSven Eckelmann1-1/+1
The function batadv_v_gw_dump stops the processing loop when batadv_v_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25batman-adv: Ignore invalid batadv_iv_gw during netlink sendSven Eckelmann1-1/+1
The function batadv_iv_gw_dump stops the processing loop when batadv_iv_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25netfilter: nf_flow_table: fix checksum when handling DNATFelix Fietkau1-0/+1
Add a missing call to csum_replace4 like on SNAT. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsetsFlorian Westphal1-1/+12
We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by: <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: ebtables: convert BUG_ONs to WARN_ONsFlorian Westphal1-9/+18
All of these conditions are not fatal and should have been WARN_ONs from the get-go. Convert them to WARN_ONs and bail out. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: bridge: ebt_among: add missing match size checksFlorian Westphal1-2/+19
ebt_among is special, it has a dynamic match size and is exempt from the central size checks. Therefore it must check that the size of the match structure provided from userspace is sane by making sure em->match_size is at least the minimum size of the expected structure. The module has such a check, but its only done after accessing a structure that might be out of bounds. tested with: ebtables -A INPUT ... \ --among-dst fe:fe:fe:fe:fe:fe --among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe Reported-by: <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pktFlorian Westphal1-0/+4
l4proto->manip_pkt() can cause reallocation of skb head so pointer to the ipv6 header must be reloaded. Reported-and-tested-by: <[email protected]> Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: ipt_CLUSTERIP: put config instead of freeing itFlorian Westphal1-3/+4
Once struct is added to per-netns list it becomes visible to other cpus, so we cannot use kfree(). Also delay setting entries refcount to 1 until after everything is initialised so that when we call clusterip_config_put() in this spot entries is still zero. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.