| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The surface_state_base is an offset into the batch, so we need to pass
the correct batch address for STATE_BASE_ADDRESS.
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Prathap Kumar Valsan <[email protected]>
Cc: Akeem G Abodunrin <[email protected]>
Cc: Hans de Goede <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: <[email protected]> # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 1914911f4aa08ddc05bae71d3516419463e0c567)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.
On ilk/snb/ivb it looks like the accesses just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.
Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.
And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.
Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
(cherry picked from commit 59fb8218c8e5001f854e7d5fdb5fb135cba58102)
Signed-off-by: Rodrigo Vivi <[email protected]>
[Rodrigo also exported some functions from intel_display.c during backport]
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
|
|
Support also transmitting frames using the custom "8899 A"
4 byte tag.
Qingfang came up with the solution: we need to pad the
ethernet frame to 60 bytes using eth_skb_pad(), then the
switch will happily accept frames with custom tags.
Cc: Mauri Sandberg <[email protected]>
Reported-by: DENG Qingfang <[email protected]>
Fixes: efd7fe68f0c6 ("net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag")
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
smatch gives the warning:
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0fd6 ("RDMA/rtrs: Only allow addition of path to an already established session")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Jack Wang <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolas Morey-Chaisemartin <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Robert Hancock says:
====================
Broadcom PHY driver updates
Updates to the Broadcom PHY driver related to use with copper SFP modules.
Changed since v3:
-fixed kerneldoc error
Changed since v2:
-Create flag for PHY on SFP module and use that rather than accessing
attached_dev directly in PHY driver
Changed since v1:
-Reversed conditional to reduce indentation
-Added missing setting of MII_BCM54XX_AUXCTL_MISC_WREN in
MII_BCM54XX_AUXCTL_SHDWSEL_MISC register
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
bcm54xx_config_init was modifying the PHY LED configuration to enable link
and activity indications. However, some SFP modules (such as Bel-Fuse
SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS
signal, and modifying the LED settings will cause the LOS output to
malfunction. Skip this configuration for PHYs which are bound to an SFP
bus.
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a flag and helper function to indicate that a PHY device is part of
an SFP module, which is set on attach. This can be used by PHY drivers
to handle SFP-specific quirks or behavior.
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The default configuration for the BCM54616S PHY may not match the desired
mode when using 1000BaseX or SGMII interface modes, such as when it is on
an SFP module. Add code to explicitly set the correct mode using
programming sequences provided by Bel-Fuse:
https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf
https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf
Signed-off-by: Robert Hancock <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On cpu architectures w/o dma cache snooping, dma_unmap() is a
is a very expensive operation, because its resulting sync
needs to invalidate cpu caches.
Increase efficiency/performance by syncing only those sections
of the lan743x's rx ring buffers that are actually in use.
Signed-off-by: Sven Van Asbroeck <[email protected]>
Reviewed-by: Bryan Whitehead <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The buffers in the lan743x driver's receive ring are always 9K,
even when the largest packet that can be received (the mtu) is
much smaller. This performs particularly badly on cpu archs
without dma cache snooping (such as ARM): each received packet
results in a 9K dma_{map|unmap} operation, which is very expensive
because cpu caches need to be invalidated.
Careful measurement of the driver rx path on armv7 reveals that
the cpu spends the majority of its time waiting for cache
invalidation.
Optimize by keeping the rx ring buffer size as close as possible
to the mtu. This limits the amount of cache that requires
invalidation.
This optimization would normally force us to re-allocate all
ring buffers when the mtu is changed - a disruptive event,
because it can only happen when the network interface is down.
Remove the need to re-allocate all ring buffers by adding support
for multi-buffer frames. Now any combination of mtu and ring
buffer size will work. When the mtu changes from mtu1 to mtu2,
consumed buffers of size mtu1 are lazily replaced by newly
allocated buffers of size mtu2.
These optimizations double the rx performance on armv7.
Third parties report 3x rx speedup on armv8.
Tested with iperf3 on a freescale imx6qp + lan7430, both sides
set to mtu 1500 bytes, measure rx performance:
Before:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0
After:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0
Signed-off-by: Sven Van Asbroeck <[email protected]>
Reviewed-by: Bryan Whitehead <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The following call path suggests that calling unregister_netdev on an
interface that is up will first bring it down.
enetc_pf_remove
-> unregister_netdev
-> unregister_netdevice_queue
-> unregister_netdevice_many
-> dev_close_many
-> __dev_close_many
-> enetc_close
-> enetc_stop
-> phylink_stop
However, enetc first destroys the phylink instance, then calls
unregister_netdev. This is already dissimilar to the setup (and error
path teardown path) from enetc_pf_probe, but more than that, it is buggy
because it is invalid to call phylink_stop after phylink_destroy.
So let's first unregister the netdev (and let the .ndo_stop events
consume themselves), then destroy the phylink instance, then free the
netdev.
Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Maxime Chevallier says:
====================
net: mvneta: implement basic MQPrio support
This is V2 for the MQPrio support in mvneta.
This small series adds basic support for mqprio offloading, by having
the rx queueing mirroring the TCs based on VLAN prio fields.
This was tested on Armada 3700, and proves useful to make sure
high-priority traffic has a better chance not getting dropped when
there's lots of packets incoming.
The first patch of the series deals with the per-cpu interrupts on the
armada 3700. Since they don't work, there were already some patches
applied to keep all queue mappings to CPU0, but there still were some
remaining mappings left to be dealt with.
The second patch implements the MQPrio offloading for the receive path.
Changes in V2 :
- Add a Fixes tag for the first patch
- Fix some warnings and the xmas tree in the second patch
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Implement a basic MQPrio support, inserting rules in RX that translate
the TC to prio mapping into vlan prio to queues.
The TX logic stays the same as when we don't offload the qdisc.
Signed-off-by: Maxime Chevallier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
According to Errata #23 "The per-CPU GbE interrupt is limited to Core
0", we can't use the per-cpu interrupt mechanism on the Armada 3700
familly.
This is correctly checked for RSS configuration, but the initial queue
mapping is still done by having the queues spread across all the CPUs in
the system, both in the init path and in the cpu_hotplug path.
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
Signed-off-by: Maxime Chevallier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When police action is created by cls API tcf_exts_validate() first
conditional that calls tcf_action_init_1() directly, the action idr is not
updated according to latest changes in action API that require caller to
commit newly created action to idr with tcf_idr_insert_many(). This results
such action not being accessible through act API and causes crash reported
by syzbot:
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: null-ptr-deref in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
BUG: KASAN: null-ptr-deref in __tcf_idr_release net/sched/act_api.c:178 [inline]
BUG: KASAN: null-ptr-deref in tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598
Read of size 4 at addr 0000000000000010 by task kworker/u4:5/204
CPU: 0 PID: 204 Comm: kworker/u4:5 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
__kasan_report mm/kasan/report.c:400 [inline]
kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413
check_memory_region_inline mm/kasan/generic.c:179 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:185
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
__tcf_idr_release net/sched/act_api.c:178 [inline]
tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598
tc_action_net_exit include/net/act_api.h:151 [inline]
police_exit_net+0x168/0x360 net/sched/act_police.c:390
ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190
cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604
process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275
worker_thread+0x64c/0x1120 kernel/workqueue.c:2421
kthread+0x3b1/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296
==================================================================
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 204 Comm: kworker/u4:5 Tainted: G B 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
panic+0x306/0x73d kernel/panic.c:231
end_report+0x58/0x5e mm/kasan/report.c:100
__kasan_report mm/kasan/report.c:403 [inline]
kasan_report.cold+0x67/0xd5 mm/kasan/report.c:413
check_memory_region_inline mm/kasan/generic.c:179 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:185
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
__tcf_idr_release net/sched/act_api.c:178 [inline]
tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598
tc_action_net_exit include/net/act_api.h:151 [inline]
police_exit_net+0x168/0x360 net/sched/act_police.c:390
ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190
cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604
process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275
worker_thread+0x64c/0x1120 kernel/workqueue.c:2421
kthread+0x3b1/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296
Kernel Offset: disabled
Fix the issue by calling tcf_idr_insert_many() after successful action
initialization.
Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together")
Reported-by: [email protected]
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
pull-request: mlx5-next 2021-02-16
The patches in this pr are already submitted and reviewed through the
netdev and rdma mailing lists.
The series includes mlx5 HW bits and definitions for mlx5 real time clock
translation and handling in the mlx5 driver clock module to enable and
support such mode [1]
[1] https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The changes made in eccd540 is enough for xilinx_emaclite to run
without problem on 64-bit systems. I have tested it on a Xilinx
FPGA with RV64 softcore. The architecture limitation in Kconfig
seems no longer necessary.
A small change is included to print address with %lx instead of
casting to int and print with %x.
Signed-off-by: Gary Guo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Horatiu Vulturv says:
====================
bridge: mrp: Extend br_mrp_switchdev_*
This patch series extends MRP switchdev to allow the SW to have a better
understanding if the HW can implement the MRP functionality or it needs
to help the HW to run it. There are 3 cases:
- when HW can't implement at all the functionality.
- when HW can implement a part of the functionality but needs the SW
implement the rest. For example if it can't detect when it stops
receiving MRP Test frames but it can copy the MRP frames to CPU to
allow the SW to determine this. Another example is generating the MRP
Test frames. If HW can't do that then the SW is used as backup.
- when HW can implement completely the functionality.
So, initially the SW tries to offload the entire functionality in HW, if
that fails it tries offload parts of the functionality in HW and use the
SW as helper and if also this fails then MRP can't run on this HW.
Based on these new calls, implement the switchdev for Ocelot driver. This
is an example where the HW can't run completely the functionality but it
can help the SW to run it, by trapping all MRP frames to CPU.
Also this patch series adds MRP support to DSA and implements the Felix
driver which just reuse the Ocelot functions. This part was just compiled
tested because I don't have any HW on which to do the actual tests.
v4:
- remove ifdef MRP from include/net/switchdev.h
- move MRP implementation for Ocelot in a different file such that
Felix driver can use it.
- extend DSA with MRP support
- implement MRP support for Felix.
v3:
- implement the switchdev calls needed by Ocelot driver.
v2:
- fix typos in comments and in commit messages
- remove some of the comments
- move repeated code in helper function
- fix issue when deleting a node when sw_backup was true
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Implement functions 'port_mrp_add', 'port_mrp_del',
'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp
functions from ocelot.
Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ
will be forward by the SW.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for offloading MRP in HW. Currently implement the switchdev
calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP',
to allow to create MRP instances and to set the role of these instances.
Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE
which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the
DSA driver for the switch.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add basic support for MRP. The HW will just trap all MRP frames on the
ring ports to CPU and allow the SW to process them. In this way it is
possible to for this node to behave both as MRM and MRC.
Current limitations are:
- it doesn't support Interconnect roles.
- it supports only a single ring.
- the HW should be able to do forwarding of MRP Test frames so the SW
will not need to do this. So it would be able to have the role MRC
without SW support.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Check the return values of the br_mrp_switchdev function.
In case of:
- BR_MRP_NONE, return the error to userspace,
- BR_MRP_SW, continue with SW implementation,
- BR_MRP_HW, continue without SW implementation,
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch extends the br_mrp_switchdev functions to be able to have a
better understanding what cause the issue and if the SW needs to be used
as a backup.
There are the following cases:
- when the code is compiled without CONFIG_NET_SWITCHDEV. In this case
return success so the SW can continue with the protocol. Depending
on the function, it returns 0 or BR_MRP_SW.
- when code is compiled with CONFIG_NET_SWITCHDEV and the driver doesn't
implement any MRP callbacks. In this case the HW can't run MRP so it
just returns -EOPNOTSUPP. So the SW will stop further to configure the
node.
- when code is compiled with CONFIG_NET_SWITCHDEV and the driver fully
supports any MRP functionality. In this case the SW doesn't need to do
anything. The functions will return 0 or BR_MRP_HW.
- when code is compiled with CONFIG_NET_SWITCHDEV and the HW can't run
completely the protocol but it can help the SW to run it. For
example, the HW can't support completely MRM role(can't detect when it
stops receiving MRP Test frames) but it can redirect these frames to
CPU. In this case it is possible to have a SW fallback. The SW will
try initially to call the driver with sw_backup set to false, meaning
that the HW should implement completely the role. If the driver returns
-EOPNOTSUPP, the SW will try again with sw_backup set to false,
meaning that the SW will detect when it stops receiving the frames but
it needs HW support to redirect the frames to CPU. In case the driver
returns 0 then the SW will continue to configure the node accordingly.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the enum br_mrp_hw_support that is used by the br_mrp_switchdev
functions to allow the SW to detect the cases where HW can't implement
the functionality or when SW is used as a backup.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the member sw_backup to the structures switchdev_obj_ring_role_mrp
and switchdev_obj_in_role_mrp. In this way the SW can call the driver in
2 ways, once when sw_backup is set to false, meaning that the driver
should implement this completely in HW. And if that is not supported the
SW will call again but with sw_backup set to true, meaning that the
HW should help or allow the SW to run the protocol.
For example when role is MRM, if the HW can't detect when it stops
receiving MRP Test frames but it can trap these frames to CPU, then it
needs to return -EOPNOTSUPP when sw_backup is false and return 0 when
sw_backup is true.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove #IS_ENABLED(CONFIG_BRIDGE_MRP) from switchdev.h. This will
simplify the code implements MRP callbacks and will be similar with the
vlan filtering.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When 88E1111 is operating in SGMII mode, auto-negotiation should be enabled
on the SGMII side so that the link will come up properly with PCSes which
normally have auto-negotiation enabled. This is normally the case when the
PHY defaults to SGMII mode at power-up, however if we switched it from some
other mode like 1000Base-X, as may happen in some SFP module situations,
it may not be, particularly for modules which have 1000Base-X
auto-negotiation defaulting to disabled.
Call genphy_check_and_restart_aneg on the fiber page to ensure that auto-
negotiation is properly enabled on the SGMII interface.
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Marek Behún says:
====================-
Add 5gbase-r PHY interface mode
there is still some testing needed for Amethyst patches, so I have
split the part adding support for 5gbase-r interface mode and am sending
it alone.
The first two patches are already reviewed.
Changes since last patches (Amethyst v16):
- added phylink 5gbase-r handler
- added SFP support for 5gbase-r mode
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The sfp_parse_support() function is setting 5000baseT_Full in some cases.
Now that we have PHY_INTERFACE_MODE_5GBASER interface mode available,
change sfp_select_interface() to return PHY_INTERFACE_MODE_5GBASER if
5000baseT_Full is set in the link mode mask.
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add 5GBASER interface type and speed to phylink.
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add 5GBASE-R phy interface mode
Signed-off-by: Pavana Sharma <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add 5gbase-r PHY interface mode.
Signed-off-by: Pavana Sharma <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The tg3 driver tried to communicate towards the PHY driver whether it
wanted RGMII in-band signaling enabled or disabled however there is
nothing that looks at those flags in drivers/net/phy/broadcom.c so this
does do not anything.
Suggested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Shyam Sundar S K says:
====================
Bug fixes to amd-xgbe driver
General fixes on amd-xgbe driver are addressed in this series, mostly
on the mailbox communication failures and improving the link stability
of the amd-xgbe device.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Frequent link up/down events can happen when a Bel Fuse SFP part is
connected to the amd-xgbe device. Try to avoid the frequent link
issues by resetting the PHY as documented in Bel Fuse SFP datasheets.
Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Normally, auto negotiation and reconnect should be automatically done by
the hardware. But there seems to be an issue where auto negotiation has
to be restarted manually. This happens because of link training and so
even though still connected to the partner the link never "comes back".
This needs an auto-negotiation restart.
Also, a change in xgbe-mdio is needed to get ethtool to recognize the
link down and get the link change message. This change is only
required in a backplane connection mode.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The current driver calls netif_carrier_off() late in the link tear down
which can result in a netdev watchdog timeout.
Calling netif_carrier_off() immediately after netif_tx_stop_all_queues()
avoids the warning.
------------[ cut here ]------------
NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out
WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220
Modules linked in: amd_xgbe(E) amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E
Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019
RIP: 0010:dev_watchdog+0x20d/0x220
Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48
RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0
RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018
R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000
R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010
FS: 0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0
Call Trace:
<IRQ>
? pfifo_fast_reset+0x100/0x100
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? enqueue_hrtimer+0x39/0x90
Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sometimes mailbox commands timeout when the RX data path becomes
unresponsive. This prevents the submission of new mailbox commands to DXIO.
This patch identifies the timeout and resets the RX data path so that the
next message can be submitted properly.
Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
into clk-next
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- Video clk fixups on Qualcomm SM8250
- GPU clks for Qualcomm SDM660/SDM630
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
* clk-socfpga:
clk: socfpga: agilex: add clock driver for eASIC N5X platform
dt-bindings: documentation: add clock bindings information for eASIC N5X
* clk-mstar:
clk: mstar: msc313-mpll: Fix format specifier
clk: mstar: Allow MStar clk drivers to be compile tested
clk: mstar: MStar/SigmaStar MPLL driver
clk: fixed: add devm helper for clk_hw_register_fixed_factor()
dt-bindings: clk: mstar msc313 mpll binding description
dt-bindings: clk: mstar msc313 mpll binding header
* clk-qcom: (42 commits)
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
dt-bindings: clock: Add SC7280 GCC clock binding
clk: qcom: rpmh: Add support for RPMH clocks on SC7280
dt-bindings: clock: Add RPMHCC bindings for SC7280
clk: qcom: gcc-sm8350: add gdsc
dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical
...
* clk-warnings: (27 commits)
clk: zynq: clkc: Remove various instances of an unused variable 'clk'
clk: versatile: clk-icst: Fix worthy struct documentation block
clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
clk: st: clkgen-pll: Demote unpopulated kernel-doc header
clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
clk: socfpga: clk-pll: Remove unused variable 'rc'
clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
clk: zynqmp: divider: Add missing description for 'max_div'
clk: spear: Move prototype to accessible header
clk: qcom: clk-rpm: Remove a bunch of superfluous code
clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
clk: clk-fixed-mmio: Demote obvious kernel-doc abuse
clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
...
|
|
'clk-rohm' into clk-next
- Support crystal load capacitance for Versaclock VC5
- Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot
* clk-vc5:
clk: vc5: Add support for optional load capacitance
dt-bindings: clk: versaclock5: Add optional load capacitance property
* clk-silabs:
clk: si570: Skip NVM to RAM recall operation if an optional property is set
dt-bindings: clock: si570: Add 'silabs,skip-recall' property
* clk-aspeed:
clk: aspeed: Fix APLL calculate formula from ast2600-A2
* clk-qoriq:
clk: qoriq: use macros to generate pll_mask
* clk-rohm:
clk: BD718x7: Do not depend on parent driver data
|
|
clk-next
* clk-mediatek:
clk: mediatek: mux: Update parent at enable time
clk: mediatek: mux: Drop unused clock ops
clk: mediatek: Select all the MT8183 clocks by default
* clk-imx:
dt-bindings: clock: imx: Switch to my personal address
MAINTAINERS: Add section for NXP i.MX clock drivers
clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header
clk: imx8mn: add clkout1/2 support
clk: imx8mm: add clkout1/2 support
clk: imx8mq: add PLL monitor output
clk: imx: clk-imx31: Remove unused static const table 'uart_clks'
clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting
clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems
clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2()
clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks
clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks
* clk-amlogic:
clk: meson: axg: Remove MIPI enable clock gate
clk: meson-axg: remove CLKID_MIPI_ENABLE
dt-bindings: clock: meson8b: remove non-existing clock macros
clk: meson: meson8b: remove compatibility code for old .dtbs
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
clk: meson: clk-pll: make "ret" a signed integer
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
* clk-at91:
clk: at91: Fix the declaration of the clocks
|
|
- Remove efm32 clk driver
- Remove tango4 clk driver
- Remove zte zx clk driver
- Remove sirf prima2/atlast clk drivers
- Remove u300 clk driver
* clk-unused:
clk: remove u300 driver
clk: remove sirf prima2/atlas drivers
clk: remove zte zx driver
clk: remove tango4 driver
clk: Drop unused efm32gg driver
|
|
'clk-xilinx' into clk-next
- Convert Xilinx VCU clk driver to a proper clk provider driver
- Expose Xilinx ZynqMP clk driver to more platforms
* clk-doc:
linux/clk.h: use correct kernel-doc notation for 2 functions
* clk-renesas: (21 commits)
clk: renesas: cpg-mssr: Fix formatting issues for 'smstpcr_saved's documentation
clk: renesas: r8a779a0: Add RAVB clocks
clk: renesas: r8a779a0: Add I2C clocks
dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add support for RZ/G2 M/N/H
clk: renesas: r8a779a0: Add SYS-DMAC clocks
clk: renesas: r8a779a0: Add SDHI support
clk: renesas: rcar-gen3: Factor out CPG library
clk: renesas: rcar-gen3: Remove cpg_quirks access when registering SD clock
clk: renesas: r8a779a0: Add MSIOF clocks
clk: renesas: r8a779a0: Add PFC/GPIO clocks
clk: renesas: r8a779a0: Fix parent of CBFUSA clock
clk: renesas: r8a779a0: Remove non-existent S2 clock
clk: renesas: r8a779a0: Add HSCIF support
clk: renesas: r8a779a0: Add RWDT clocks
clk: renesas: r8a779a0: Add VSPX clock support
clk: renesas: r8a779a0: Add VSPD clock support
clk: renesas: r8a779a0: Add FCPVD clock support
clk: renesas: r8a77995: Add TMU clocks
clk: renesas: r8a77990: Add TMU clocks
clk: renesas: r8a77965: Add TMU clocks
...
* clk-allwinner:
clk: sunxi-ng: Add support for the Allwinner H616 CCU
clk: sunxi-ng: Add support for the Allwinner H616 R-CCU
dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616
clk: sunxi-ng: h6: Fix clock divider range on some clocks
clk: sunxi: clk-mod0: Demote non-conformant kernel-doc header
clk: sunxi: clk-a10-ve: Demote obvious kernel-doc abuse
clk: sunxi: clk-sunxi: Demote a bunch of non-conformant kernel-doc headers
clk: sunxi-ng: h6: Fix CEC clock
clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
* clk-rockchip:
clk: rockchip: fix DPHY gate locations on rk3368
clk: rockchip: use clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: add clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: use clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: add clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: Demote non-conformant kernel-doc header in half-divider
clk: rockchip: Demote kernel-doc abuses to standard comment blocks in plls
clk: rockchip: Remove unused/undocumented struct members from clk-cpu
clk: rockchip: Demote non-conformant kernel-doc headers in main clock code
* clk-xilinx:
clk: xilinx: move xlnx_vcu clock driver from soc
soc: xilinx: vcu: fix alignment to open parenthesis
soc: xilinx: vcu: fix repeated word the in comment
soc: xilinx: vcu: use bitfields for register definition
soc: xilinx: vcu: remove calculation of PLL configuration
soc: xilinx: vcu: make the PLL configurable
soc: xilinx: vcu: make pll post divider explicit
soc: xilinx: vcu: implement clock provider for output clocks
soc: xilinx: vcu: register PLL as fixed rate clock
soc: xilinx: vcu: implement PLL disable
soc: xilinx: vcu: add helpers for configuring PLL
soc: xilinx: vcu: add helper to wait for PLL locked
soc: xilinx: vcu: drop coreclk from struct xlnx_vcu
clk: divider: fix initialization with parent_hw
ARM: dts: vcu: define indexes for output clocks
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
dt-bindings: clock: adi,axi-clkgen: add compatible string for ZynqMP support
clk: clk-axiclkgen: add ZynqMP PFD and VCO limits
clk: axi-clkgen: replace ARCH dependencies with driver deps
|
|
Bjarni Jonasson says:
====================
Fixes applied to VCS8514
3 different fixes applied to VSC8514:
LCPLL reset, serdes calibration and coma mode disabled.
Especially the serdes calibration is large and is now placed
in a new file 'mscc_serdes.c' which can act as
a placeholder for future serdes configuration.
v1 -> v2:
Preserved reversed christmas tree
Removed forward definitions
Fixed build issues
Changed net to net-next
v2 -> v3:
Added cover letter.
Removed ena_clk_bypass from function call
Created mscc_serdes.c and .h for serdes configuration
Modified coma register config.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The 'coma mode' (configurable through sw or hw) provides an
optional feature that may be used to control when the PHYs become active.
The typical usage is to synchronize the link-up time across
all PHY instances. This patch releases coma mode if not done by hardware,
otherwise the phys will not link-up.
Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund <[email protected]>
Signed-off-by: Bjarni Jonasson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|