| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a loop block device encounters a writeback error, that error will
get propagated to the bd_inode's wb_err field. If we then detach the
backing file from it, attach another and fsync it, we'll get back the
writeback error that we had from the previous backing file.
This is a bit of a grey area as POSIX doesn't cover loop devices, but it
is somewhat counterintuitive.
If we detach a backing file from the loopdev while there are still
unreported errors, take it as a sign that we're no longer interested in
the previous file, and clear out the wb_err in the loop blockdev.
Reported-and-Tested-by: Theodore Y. Ts'o <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
kill_ioctx() used to have an explicit RCU delay between removing the
reference from ->ioctx_table and percpu_ref_kill() dropping the refcount.
At some point that delay had been removed, on the theory that
percpu_ref_kill() itself contained an RCU delay. Unfortunately, that was
the wrong kind of RCU delay and it didn't care about rcu_read_lock() used
by lookup_ioctx(). As the result, we could get ctx freed right under
lookup_ioctx(). Tejun has fixed that in a6d7cff472e ("fs/aio: Add explicit
RCU grace period when freeing kioctx"); however, that fix is not enough.
Suppose io_destroy() from one thread races with e.g. io_setup() from another;
CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2
has picked it (under rcu_read_lock()). Then CPU1 proceeds to drop the
refcount, getting it to 0 and triggering a call of free_ioctx_users(),
which proceeds to drop the secondary refcount and once that reaches zero
calls free_ioctx_reqs(). That does
INIT_RCU_WORK(&ctx->free_rwork, free_ioctx);
queue_rcu_work(system_wq, &ctx->free_rwork);
and schedules freeing the whole thing after RCU delay.
In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the
refcount from 0 to 1 and returned the reference to io_setup().
Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get
freed until after percpu_ref_get(). Sure, we'd increment the counter before
ctx can be freed. Now we are out of rcu_read_lock() and there's nothing to
stop freeing of the whole thing. Unfortunately, CPU2 assumes that since it
has grabbed the reference, ctx is *NOT* going away until it gets around to
dropping that reference.
The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss.
It's not costlier than what we currently do in normal case, it's safe to
call since freeing *is* delayed and it closes the race window - either
lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users
won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx()
fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see
the object in question at all.
Cc: [email protected]
Fixes: a6d7cff472e "fs/aio: Add explicit RCU grace period when freeing kioctx"
Signed-off-by: Al Viro <[email protected]>
|
|
open file, unlink it, then use ioctl(2) to make it immutable or
append only. Now close it and watch the blocks *not* freed...
Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
|
|
That can (and does, on some filesystems) happen - ->mkdir() (and thus
vfs_mkdir()) can legitimately leave its argument negative and just
unhash it, counting upon the lookup to pick the object we'd created
next time we try to look at that name.
Some vfs_mkdir() callers forget about that possibility...
Acked-by: J. Bruce Fields <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
That can (and does, on some filesystems) happen - ->mkdir() (and thus
vfs_mkdir()) can legitimately leave its argument negative and just
unhash it, counting upon the lookup to pick the object we'd created
next time we try to look at that name.
Some vfs_mkdir() callers forget about that possibility...
Signed-off-by: Al Viro <[email protected]>
|
|
new_sb is left uninitialized in case of early failures in kernfs_mount_ns(),
and while IS_ERR(root) is true in all such cases, using IS_ERR(root) || !new_sb
is not a solution - IS_ERR(root) is true in some cases when new_sb is true.
Make sure new_sb is initialized (and matches the reality) in all cases and
fix the condition for dropping kobj reference - we want it done precisely
in those situations where the reference has not been transferred into a new
super_block instance.
Signed-off-by: Al Viro <[email protected]>
|
|
make sure that info->node is initialized early, so that kernfs_kill_sb()
can list_del() it safely.
Signed-off-by: Al Viro <[email protected]>
|
|
There's an extra C here...
Fixes: 99c18ce580c6 ("cramfs: direct memory access support")
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
RTFS(Documentation/filesystems/nfs/Exporting) if you try to make
something exportable.
Fixes: ac632f5b6301 "befs: add NFS export support"
Signed-off-by: Al Viro <[email protected]>
|
|
Making something exportable takes more than providing ->s_export_ops.
In particular, ->lookup() *MUST* use d_splice_alias() instead of
d_add().
Reading Documentation/filesystems/nfs/Exporting would've been a good idea;
as it is, exporting AFFS is badly (and exploitably) broken.
Partially-Fixes: ed4433d72394 "fs/affs: make affs exportable"
Acked-by: David Sterba <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
we unlock the directory hash too early - if we are looking at secondary
link and primary (in another directory) gets removed just as we unlock,
we could have the old primary moved in place of the secondary, leaving
us to look into freed entry (and leaving our dentry with ->d_fsdata
pointing to a freed entry).
Cc: [email protected] # 2.4.4+
Acked-by: David Sterba <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge speculative store buffer bypass fixes from Thomas Gleixner:
- rework of the SPEC_CTRL MSR management to accomodate the new fancy
SSBD (Speculative Store Bypass Disable) bit handling.
- the CPU bug and sysfs infrastructure for the exciting new Speculative
Store Bypass 'feature'.
- support for disabling SSB via LS_CFG MSR on AMD CPUs including
Hyperthread synchronization on ZEN.
- PRCTL support for dynamic runtime control of SSB
- SECCOMP integration to automatically disable SSB for sandboxed
processes with a filter flag for opt-out.
- KVM integration to allow guests fiddling with SSBD including the new
software MSR VIRT_SPEC_CTRL to handle the LS_CFG based oddities on
AMD.
- BPF protection against SSB
.. this is just the core and x86 side, other architecture support will
come separately.
* 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
bpf: Prevent memory disambiguation attack
x86/bugs: Rename SSBD_NO to SSB_NO
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
x86/bugs: Rework spec_ctrl base and mask logic
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
x86/speculation: Rework speculative_store_bypass_update()
x86/speculation: Add virtualized speculative store bypass disable support
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Handle HT correctly on AMD
x86/cpufeatures: Add FEATURE_ZEN
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
KVM: SVM: Move spec control call after restore of GS
x86/cpu: Make alternative_msr_write work for 32-bit code
x86/bugs: Fix the parameters alignment and missing void
x86/bugs: Make cpu_show_common() static
...
|
|
We're casting the CDROM layer request_sense to the SCSI sense
buffer, but the former is 64 bytes and the latter is 96 bytes.
As we generally allocate these on the stack, we end up blowing
up the stack.
Fix this by wrapping the scsi_execute() call with a properly
sized sense buffer, and copying back the bits for the CDROM
layer.
Cc: [email protected]
Reported-by: Piotr Gabriel Kosinski <[email protected]>
Reported-by: Daniel Shapira <[email protected]>
Tested-by: Kees Cook <[email protected]>
Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Jens Axboe <[email protected]>
|
|
Otherwise modules that use these arithmetic operations will fail to
link. We accomplish this with the usual EXPORT_SYMBOL, which on most
architectures goes in the .S file but the ARM64 maintainers prefer that
insead it goes into arm64ksyms.
While we're at it, we also fix this up to use SPDX, and I personally
choose to relicense this as GPL2||BSD so that these symbols don't need
to be export_symbol_gpl, so all modules can use the routines, since
these are important general purpose compiler-generated function calls.
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reported-by: PaX Team <[email protected]>
Cc: [email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
For LSE atomics that read and write a register operand, we need to
ensure that these operands are annotated as "early clobber" if the
register is written before all of the input operands have been consumed.
Failure to do so can result in the compiler allocating the same register
to both operands, leading to splats such as:
Unable to handle kernel paging request at virtual address 11111122222221
[...]
x1 : 1111111122222222 x0 : 1111111122222221
Process swapper/0 (pid: 1, stack limit = 0x000000008209f908)
Call trace:
test_atomic64+0x1360/0x155c
where x0 has been allocated as both the value to be stored and also the
atomic_t pointer.
This patch adds the missing clobbers.
Cc: <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Robin Murphy <[email protected]>
Reported-by: Mark Salter <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
- fix build with DEBUG_ZBOOT and MACH_JZ4770 (4.16)
- include xilfpga FDT in fitImage and stop generating dtb.o (4.15)
- fix software IO coherence on CM SMP systems (4.8)
- ptrace: Fix PEEKUSR/POKEUSR to o32 FGRs (3.14)
- ptrace: Expose FIR register through FP regset (3.13)
- fix typo in KVM debugfs file name (3.10)
* tag 'mips_fixes_4.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
MIPS: xilfpga: Actually include FDT in fitImage
MIPS: xilfpga: Stop generating useless dtb.o
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4770
MIPS: c-r4k: Fix data corruption related to cache coherence
|
|
Pull networking fixes from David Miller:
1) Fix refcounting bug for connections in on-packet scheduling mode of
IPVS, from Julian Anastasov.
2) Set network header properly in AF_PACKET's packet_snd, from Willem
de Bruijn.
3) Fix regressions in 3c59x by converting to generic DMA API. It was
relying upon the hack that the PCI DMA interfaces would accept NULL
for EISA devices. From Christoph Hellwig.
4) Remove RDMA devices before unregistering netdev in QEDE driver, from
Michal Kalderon.
5) Use after free in TUN driver ptr_ring usage, from Jason Wang.
6) Properly check for missing netlink attributes in SMC_PNETID
requests, from Eric Biggers.
7) Set DMA mask before performaing any DMA operations in vmxnet3
driver, from Regis Duchesne.
8) Fix mlx5 build with SMP=n, from Saeed Mahameed.
9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.
10) Tuntap use after free during release, from Jason Wang.
11) Don't use stack memory in scatterlists in tls code, from Matt
Mullins.
12) Not fully initialized flow key object in ipv4 routing code, from
David Ahern.
13) Various packet headroom bug fixes in ip6_gre driver, from Petr
Machata.
14) Remove queues from XPS maps using correct index, from Amritha
Nambiar.
15) Fix use after free in sock_diag, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: ip6_gre: fix tunnel metadata device sharing.
cxgb4: fix offset in collecting TX rate limit info
net: sched: red: avoid hashing NULL child
sock_diag: fix use-after-free read in __sk_free
sh_eth: Change platform check to CONFIG_ARCH_RENESAS
net: dsa: Do not register devlink for unused ports
net: Fix a bug in removing queues from XPS map
bpf: fix truncated jump targets on heavy expansions
bpf: parse and verdict prog attach may race with bpf map update
bpf: sockmap update rollback on error can incorrectly dec prog refcnt
net: test tailroom before appending to linear skb
net: ip6_gre: Fix ip6erspan hlen calculation
net: ip6_gre: Split up ip6gre_changelink()
net: ip6_gre: Split up ip6gre_newlink()
net: ip6_gre: Split up ip6gre_tnl_change()
net: ip6_gre: Split up ip6gre_tnl_link_config()
net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
net: ip6_gre: Request headroom in __gre6_xmit()
selftests/bpf: check return value of fopen in test_verifier.c
erspan: fix invalid erspan version.
...
|
|
While whitelisting Micron M500DC drives, the tweaked blacklist entry
enabled queued TRIM from M500IT variants also. But these do not support
queued TRIM. And while using those SSDs with the latest kernel we have
seen errors and even the partition table getting corrupted.
Some part from the dmesg:
[ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133
[ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.741026] ata1.00: supports DRM functions and may not be fully accessible
[ 6.759887] ata1.00: configured for UDMA/133
[ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5
and then for the error:
[ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen
[ 120.860338] ata1.00: irq_stat 0x40000008
[ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED
[ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout)
[ 120.860353] ata1.00: status: { DRDY }
[ 120.860543] ata1: hard resetting link
[ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 121.166376] ata1.00: supports DRM functions and may not be fully accessible
[ 121.186238] ata1.00: supports DRM functions and may not be fully accessible
[ 121.204445] ata1.00: configured for UDMA/133
[ 121.204454] ata1.00: device reported invalid CHS sector 0
[ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current]
[ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4
[ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00
[ 121.204559] print_req_error: I/O error, dev sda, sector 272512
After few reboots with these errors, and the SSD is corrupted.
After blacklisting it, the errors are not seen and the SSD does not get
corrupted any more.
Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC")
Cc: Martin K. Petersen <[email protected]>
Cc: [email protected]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to
properly reset the host controller (reset all) on initialization
after exiting deep sleep.
Signed-off-by: Corneliu Doban <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Reviewed-by: Srinath Mannam <[email protected]>
Fixes: c833e92bbb60 ("mmc: sdhci-iproc: support standard byte register accesses")
Cc: [email protected] # v4.10+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
When the host controller accepts only 32bit writes, the value of the
16bit TRANSFER_MODE register, that has the same 32bit address as the
16bit COMMAND register, needs to be saved and it will be written
in a 32bit write together with the command as this will trigger the
host to send the command on the SD interface.
When sending the tuning command, TRANSFER_MODE is written and then
sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and
write it again resulting in wrong value to be written because the
initial write value was saved in a shadow and the read-back returned
a wrong value, from the register.
Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE
when a saved value exist.
Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are
saved for a different reason, although a scenario that will cause the
mentioned problem on this registers is not probable.
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Cc: [email protected] # v4.1+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Remove hard coded mmc cap 1.8v from platform data as it is board specific.
The 1.8v DDR mmc caps can be enabled using DTS property for those
boards that support it.
Fixes: b17b4ab8ce38 ("mmc: sdhci-iproc: define MMC caps in platform data")
Signed-off-by: Srinath Mannam <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Cc: [email protected] # v4.8+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
In commit 97548575bef3 ("mmc: block: Convert RPMB to a character device") a
new function `mmc_rpmb_ioctl` was added. The final return is simply
returning a value of `0` instead of propagating the correct return code.
Discovered during a compilation with W=1, silence the following gcc warning
drivers/mmc/core/block.c:2470:6: warning: variable ‘ret’ set but not used
[-Wunused-but-set-variable]
Signed-off-by: Mathieu Malaterre <[email protected]>
Reviewed-by: Shawn Lin <[email protected]>
Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device")
Cc: [email protected] # v4.15+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixlets from Helge Deller:
"Three small section mismatch fixes, one of them was found by 0-day
test infrastructure"
* 'parisc-4.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Move ccio_cujo20_fixup() into init section
parisc: Move setup_profiling_timer() out of init section
parisc: Move find_pa_parent_type() out of init section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've accumulated some fixes during the last week, some of them were
in the works for a longer time but there are some newer ones too.
Most of the fixes have a reproducer and fix user visible problems,
also candidates for stable kernels. They IMHO qualify for a late rc,
though I did not expect that many"
* tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix crash when trying to resume balance without the resume flag
btrfs: Fix delalloc inodes invalidation during transaction abort
btrfs: Split btrfs_del_delalloc_inode into 2 functions
btrfs: fix reading stale metadata blocks after degraded raid1 mounts
btrfs: property: Set incompat flag if lzo/zstd compression is set
Btrfs: fix duplicate extents after fsync of file with prealloc extents
Btrfs: fix xattr loss after power failure
Btrfs: send, fix invalid access to commit roots due to concurrent snapshotting
|
|
Pull ARM fixes from Russell King:
- Łukasz Stelmach spotted a couple of issues with the decompressor.
- a couple of kdump fixes found while testing kdump
- replace some perl with shell code
- resolve SIGFPE breakage
- kprobes fixes
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix kill( ,SIGFPE) breakage
ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
ARM: replace unnecessary perl with sed and the shell $(( )) operator
ARM: kexec: record parent context registers for non-crash CPUs
ARM: kexec: fix kdump register saving on panic()
ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel
ARM: 8753/1: decompressor: add a missing parameter to the addruart macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"An unfortunately larger set of fixes, but a large portion is
selftests:
- Fix the missing clusterid initializaiton for x2apic cluster
management which caused boot failures due to IPIs being sent to the
wrong cluster
- Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat
task
- Wrap access to __supported_pte_mask in __startup_64() where clang
compile fails due to a non PC relative access being generated.
- Two fixes for 5 level paging fallout in the decompressor:
- Handle GOT correctly for paging_prepare() and
cleanup_trampoline()
- Fix the page table handling in cleanup_trampoline() to avoid
page table corruption.
- Stop special casing protection key 0 as this is inconsistent with
the manpage and also inconsistent with the allocation map handling.
- Override the protection key wen moving away from PROT_EXEC to
prevent inaccessible memory.
- Fix and update the protection key selftests to address breakage and
to cover the above issue
- Add a MOV SS self test"
[ Part of the x86 fixes were in the earlier core pull due to dependencies ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm: Drop TS_COMPAT on 64-bit exec() syscall
x86/apic/x2apic: Initialize cluster ID properly
x86/boot/compressed/64: Fix moving page table out of trampoline memory
x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
x86/pkeys: Do not special case protection key 0
x86/pkeys/selftests: Add a test for pkey 0
x86/pkeys/selftests: Save off 'prot' for allocations
x86/pkeys/selftests: Fix pointer math
x86/pkeys: Override pkey when moving away from PROT_EXEC
x86/pkeys/selftests: Fix pkey exhaustion test off-by-one
x86/pkeys/selftests: Add PROT_EXEC test
x86/pkeys/selftests: Factor out "instruction page"
x86/pkeys/selftests: Allow faults on unknown keys
x86/pkeys/selftests: Avoid printf-in-signal deadlocks
x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal
x86/pkeys/selftests: Stop using assert()
x86/pkeys/selftests: Give better unexpected fault error messages
x86/selftests: Add mov_to_ss test
x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI
x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull UP timer fix from Thomas Gleixner:
"Work around the for_each_cpu() oddity on UP kernels in the tick
broadcast code which causes boot failures because the CPU0 bit is
always reported as set independent of the cpumask content"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Use for_each_cpu() specially on UP kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixlets from Thomas Gleixner:
"Three trivial fixlets for the scheduler:
- move print_rt_rq() and print_dl_rq() declarations to the right
place
- make grub_reclaim() static
- fix the bogus documentation reference in Kconfig"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix documentation file path
sched/deadline: Make the grub_reclaim() function static
sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Thomas Gleixner:
"Fix a regression in the new AMD SMCA code which issues an SMP function
call from the early interrupt disabled region of CPU hotplug. To avoid
that, use cached block addresses which can be used directly"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Cache SMCA MISC block addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
- fix segfault when processing unknown threads in cs-etm
- fix "perf test inet_pton" on s390 failing due to missing inline
- display all available events on 'perf annotate --stdio'
- add missing newline when parsing an empty BPF program
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Add missing newline when parsing empty BPF proggie
perf cs-etm: Remove redundant space
perf cs-etm: Support unknown_thread in cs_etm_auxtrace
perf annotate: Display all available events on --stdio
perf test: "probe libc's inet_pton" fails on s390 due to missing inline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes to address shortcomings of the rwsem/percpu-rwsem lock
debugging code which emits false positive warnings when the rwsem is
anonymously locked and unlocked"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN
locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
- Use explicitely sized type for the romimage pointer in the 32bit EFI
protocol struct so a 64bit kernel does not expand it to 64bit. Ditto
for the 64bit struct to avoid the reverse issue on 32bit kernels.
- Handle randomized tex offset correctly in the ARM64 EFI stub to avoid
unaligned data resulting in stack corruption and other hard to
diagnose wreckage.
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub/arm64: Handle randomized TEXT_OFFSET
efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
- Unbreak the BPF compilation which got broken by the unconditional
requirement of asm-goto, which is not supported by clang.
- Prevent probing on exception masking instructions in uprobes and
kprobes to avoid the issues of the delayed exceptions instead of
having an ugly workaround.
- Prevent a double free_page() in the error path of do_kexec_load()
- A set of objtool updates addressing various issues mostly related to
switch tables and the noreturn detection for recursive sibling calls
- Header sync for tools.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Detect RIP-relative switch table references, part 2
objtool: Detect RIP-relative switch table references
objtool: Support GCC 8 switch tables
objtool: Support GCC 8's cold subfunctions
objtool: Fix "noreturn" detection for recursive sibling calls
objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h
x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation
uprobes/x86: Prohibit probing on MOV SS instruction
kprobes/x86: Prohibit probing on exception masking instructions
x86/kexec: Avoid double free_page() upon do_kexec_load() failure
|
|
The connector .atomic_check() handler can be called with a NULL crtc
pointer in the connector state when the connector gets disabled
explicitly (through performing a legacy mode set or setting the
connector's CRTC_ID property to 0). This causes a crash as the crtc
pointer is dereferenced without any check.
Fix it by returning from the .atomic_check() handler when then crtc
pointer is NULL, as there is no check to be performed when the connector
gets disabled.
Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
|
|
Currently ip6gre and ip6erspan share single metadata mode device,
using 'collect_md_tun'. Thus, when doing:
ip link add dev ip6gre11 type ip6gretap external
ip link add dev ip6erspan12 type ip6erspan external
RTNETLINK answers: File exists
simply fails due to the 2nd tries to create the same collect_md_tun.
The patch fixes it by adding a separate collect md tunnel device
for the ip6erspan, 'collect_md_tun_erspan'. As a result, a couple
of places need to refactor/split up in order to distinguish ip6gre
and ip6erspan.
First, move the collect_md check at ip6gre_tunnel_{unlink,link} and
create separate function {ip6gre,ip6ersapn}_tunnel_{link_md,unlink_md}.
Then before link/unlink, make sure the link_md/unlink_md is called.
Finally, a separate ndo_uninit is created for ip6erspan. Tested it
using the samples/bpf/test_tunnel_bpf.sh.
Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: William Tu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes. I've been queuing them up a bit too long so the
list is longer than it otherwise would have been spread out across a
few -rcs.
In general, it's a scattering of fixes across several platforms,
nothing truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a
handful of regressions, some of them going back very far, others more
recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible,
splitting up describing LVDS as a proper bridge instead of having it
as part of the display unit.
We could push for them to be backwards compatible with old device
trees, but it's likely to regress eventually if nobody's actually
using said compatibility"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
ARM: keystone: fix platform_domain_notifier array overrun
arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
ARM: dts: cygnus: fix irq type for arm global timer
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
tee: check shm references are consistent in offset/size
tee: shm: fix use-after-free via temporarily dropped reference
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
arm64: tegra: Make BCM89610 PHY interrupt as active low
ARM: davinci: fix GPIO lookup for I2C
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes
arm64: tegra: Device tree fixes for v4.17
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: Olof Johansson <[email protected]>
|
|
Detect code patterns where malicious 'speculative store bypass' can be used
and sanitize such patterns.
39: (bf) r3 = r10
40: (07) r3 += -216
41: (79) r8 = *(u64 *)(r7 +0) // slow read
42: (7a) *(u64 *)(r10 -72) = 0 // verifier inserts this instruction
43: (7b) *(u64 *)(r8 +0) = r3 // this store becomes slow due to r8
44: (79) r1 = *(u64 *)(r6 +0) // cpu speculatively executes this load
45: (71) r2 = *(u8 *)(r1 +0) // speculatively arbitrary 'load byte'
// is now sanitized
Above code after x86 JIT becomes:
e5: mov %rbp,%rdx
e8: add $0xffffffffffffff28,%rdx
ef: mov 0x0(%r13),%r14
f3: movq $0x0,-0x48(%rbp)
fb: mov %rdx,0x0(%r14)
ff: mov 0x0(%rbx),%rdi
103: movzbq 0x0(%rdi),%rsi
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Commit 7771c6645700 ("signal/arm: Document conflicts with SI_USER and
SIGFPE") broke the siginfo structure for userspace triggered signals,
causing the strace testsuite to regress. Fix this by eliminating
the FPE_FIXME definition (which is at the root of the breakage) and
use FPE_FLTINV instead for the case where the hardware appears to be
reporting nonsense.
Fixes: 7771c6645700 ("signal/arm: Document conflicts with SI_USER and SIGFPE")
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Russell King <[email protected]>
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
- qcom bam runtime_pm fix
- email update for Vinod
* tag 'dmaengine-fix-4.17-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: qcom: bam_dma: check if the runtime pm enabled
dmaengine: Update email address for Vinod
|
|
Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong. In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.
It turns out that the "s_maxbytes" limit was less "known good" than I
thought. In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore. As a result, that file got limited to the
default MAX_INT s_maxbytes value.
This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.
Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage. So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else. It wasn't the regular file case I was worried
about.
I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.
Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
... into a global, two-dimensional array and service subsequent reads from
that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs
disabled).
In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage
of the bank->blocks pointer.
Fixes: 27bd59502702 ("x86/mce/AMD: Get address from already initialized block")
Reported-by: Johannes Hirte <[email protected]>
Tested-by: Johannes Hirte <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Yazen Ghannam <[email protected]>
Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
|
|
Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.
Fixes: 24ba613c9d6c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>
|
|
Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.
Fixes: 24ba613c9d6c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>
|
|
Prohibit probing on optimized_callback() because
it is called from kprobes itself. If we put a kprobes
on it, that will cause a recursive call loop.
Mark it NOKPROBE_SYMBOL.
Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>
|
|
Since get_kprobe_ctlblk() uses smp_processor_id() to access
per-cpu variable, it hits smp_processor_id sanity check as below.
[ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 7.007859] caller is debug_smp_processor_id+0x20/0x24
[ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1
[ 7.008890] Hardware name: Generic DT based system
[ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24)
[ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98)
[ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c)
[ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24)
[ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4)
[ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0)
To fix this issue, call get_kprobe_ctlblk() right after
irq-disabled since that disables preemption.
Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>
|
|
You can build a kernel in a cross compiling environment that doesn't
have perl in the $PATH. Commit 429f7a062e3b broke that for 32 bit
ARM. Fix it.
As reported by Stephen Rothwell, it appears that the symbols can be
either part of the BSS section or absolute symbols depending on the
binutils version. When they're an absolute symbol, the $(( ))
operator errors out and the build fails. Fix this as well.
Fixes: 429f7a062e3b ("ARM: decompressor: fix BSS size calculation")
Reported-by: Rob Landley <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Acked-by: Rob Landley <[email protected]>
Signed-off-by: Russell King <[email protected]>
|
|
How we got to machine_crash_nonpanic_core() (iow, from an IPI, etc) is
not interesting for debugging a crash. The more interesting context
is the parent context prior to the IPI being received.
Record the parent context register state rather than the register state
in machine_crash_nonpanic_core(), which is more relevant to the failing
condition.
Signed-off-by: Russell King <[email protected]>
|
|
When a panic() occurs, the kexec code uses smp_send_stop() to stop
the other CPUs, but this results in the CPU register state not being
saved, and gdb is unable to inspect the state of other CPUs.
Commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path") addressed the issue on x86, but
ignored other architectures. Address the issue on ARM by splitting
out the crash stop implementation to crash_smp_send_stop() and
adding the necessary protection.
Signed-off-by: Russell King <[email protected]>
|