| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'enable', which probably should have been 'enabled', is only ever read
in the core code in relation to controlling sources, and specifically
only sources in sysfs mode. Confusingly it's not labelled as such and
relying on it can be a source of bugs like the one fixed by
commit 078dbba3f0c9 ("coresight: Fix crash when Perf and sysfs modes are
used concurrently").
Most importantly, it can only be used when the coresight_mutex is held
which is only done when enabling and disabling paths in sysfs mode, and
not Perf mode. So to prevent its usage spreading and leaking out to
other devices, remove it.
It's use is equivalent to checking if the mode is currently sysfs, as
due to the coresight_mutex lock, mode == CS_MODE_SYSFS can only become
true or untrue when that lock is held, and when mode == CS_MODE_SYSFS
the device is both enabled and in sysfs mode.
The one place it was used outside of the core code is in TPDA, but that
pattern is more appropriately represented using refcounts inside the
device's own spinlock.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-6-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Most devices use mode, so move the mode definition out of the individual
devices and up to the Coresight device. This will allow the core code to
also know the mode which will be useful in a later commit.
This also fixes the inconsistency of the documentation of the mode field
on the individual device types. For example ETB10 had "this ETB is being
used".
Two devices didn't require an atomic mode type, so these usages have
been converted to atomic_get() and atomic_set() only to make it compile,
but the documentation of the field in struct coresight_device explains
this type of usage.
In the future, manipulation of the mode could be completely moved out of
the individual devices and into the core code because it's almost all
duplicate code, and this change is a step towards that.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
The check for the existence of callbacks before using them implies that
this happens and is supported. There are no devices without
enable/disable callbacks, and it wouldn't be possible to add a new
working device without adding them either, so just remove them.
Furthermore, there are more callbacks than just enable and disable that
are already used unguarded in other places.
The comment about new session compatibility doesn't seem to match up to
the line of code that it's on so remove it. I think it's alluding to the
fact that sinks will check if they were already enabled via sysfs or
Perf and fail the enable. But there are more detailed comments at those
places, and this one isn't very useful.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-4-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Activated has the specific meaning of a sink that's selected for use by
the user via sysfs. But comments in some code that's shared by Perf use
the same word, so in those cases change them to just say "selected"
instead. With selected implying either via Perf or "activated" via
sysfs.
coresight_get_enabled_sink() doesn't actually get an enabled sink, it
only gets an activated one, so change that too.
And change the activated variable name to include "sysfs" so it can't
be confused as a general status.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-3-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
The linked commit reverts the change that accidentally used some sysfs
enable/disable functions from Perf which broke the refcounting, but it
also removes the fact that the sysfs disable function disabled the
helpers.
Add a new wrapper function that does both which is used by both Perf and
sysfs, and label the sysfs disable function appropriately. The naming of
all of the functions will be tidied up later to avoid this happening
again.
Fixes: 287e82cf69aa ("coresight: Fix crash when Perf and sysfs modes are used concurrently")
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-2-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the coresight_bustype variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/2024010531-tinfoil-avert-4a57@gregkh
|
|
Similarly to drivers/gpu/drm/amd/amdgpu/Makefile and
fs/btrfs/Makefile, copy the current set of W=1 warnings from
Makefile.extrawarn to the coresight makefile to make them default.
Unfortunately there is no easy way to do this without copying.
In addition to the default set of warnings, add -Wno-sign-compare to
disable that warning. That's because Makefile.extrawarn does some extra
steps to disable some -Wextra warnings unless W=2 or W=3 are used.
That's the only one that's needed for Coresight, so disable it.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-5-james.clark@arm.com
|
|
Including the header with the declarations fixes the following warning
with a C=1 build:
coresight-cfg-afdo.c:102:27: warning: symbol 'strobe_etm4x' was not declared. Should it be static?
coresight-cfg-afdo.c:141:26: warning: symbol 'afdo_etm4x' was not declared. Should it be static?
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-4-james.clark@arm.com
|
|
The missing * in the comment block causes the following warning, so fix
it:
hwtracing/coresight/coresight-etm3x-core.c:118: warning: bad line:
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-3-james.clark@arm.com
|
|
These warnings would be hit with the following W=1 build change so
initialize all structs properly.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-2-james.clark@arm.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Make sure a warning is issued when a hrtimer gets queued after the
timers have been migrated on the CPU down path and thus said timer
will get ignored
* tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Report offline hrtimer enqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
that such hw can boot again
- Do not take into accout XSTATE buffer size info supplied by userspace
when constructing a sigreturn frame
- Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
MCE is encountered so that it can be properly recovered from instead
of simply panicking
* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A change to accelerate the device detection step in some cases.
In the self-identification step after bus-reset, all nodes in the same
bus broadcast selfID packet including the value of gap count. The
value is related to the cable hops between nodes, and used to
calculate the subaction gap and the arbitration reset gap.
When each node has the different value of the gap count, the
asynchronous communication between them is unreliable, since an
asynchronous transaction could be interrupted by another asynchronous
transaction before completion. The gap count inconsistency can be
resolved by several ways; e.g. the transfer of PHY configuration
packet and generation of bus-reset.
The current implementation of firewire stack can correctly detect the
gap count inconsistency, however the recovery action from the
inconsistency tends to be delayed after reading configuration ROM of
root node. This results in the long time to probe devices in some
combinations of hardware.
Here the stack is changed to schedule the action as soon as possible"
* tag 'firewire-fixes-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: send bus reset promptly on gap count error
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes:
- memory leak fix
- a minor kernel-doc fix"
* tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read fails
ksmbd: Add kernel-doc for ksmbd_extract_sharename() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one core fix.
The core fix being a fixup to the one in the last pull request which
didn't entirely move checking of scsi_host_busy() out from under the
host lock"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
scsi: lpfc: Use unsigned type for num_sge
scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
|
|
Pull smb client fixes from Steve French:
- reconnect fix
- multichannel channel selection fix
- minor mount warning fix
- reparse point fix
- null pointer check improvement
* tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: clarify mount warning
cifs: handle cases where multiple sessions share connection
cifs: change tcon status when need_reconnect is set on it
smb: client: set correct d_type for reparse points under DFS mounts
smb3: add missing null server pointer check
|
|
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
"Fixed:
- size update for compressed file
- some logic errors, overflows
- memory leak
- some code was refactored
Added:
- implement super_operations::shutdown
Improved:
- alternative boot processing
- reduced stack usage"
* tag 'ntfs3_for_6.8' of https://github.com/Paragon-Software-Group/linux-ntfs3: (28 commits)
fs/ntfs3: Slightly simplify ntfs_inode_printk()
fs/ntfs3: Add ioctl operation for directories (FITRIM)
fs/ntfs3: Fix oob in ntfs_listxattr
fs/ntfs3: Fix an NULL dereference bug
fs/ntfs3: Update inode->i_size after success write into compressed file
fs/ntfs3: Fixed overflow check in mi_enum_attr()
fs/ntfs3: Correct function is_rst_area_valid
fs/ntfs3: Use i_size_read and i_size_write
fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
fs/ntfs3: Disable ATTR_LIST_ENTRY size check
fs/ntfs3: Fix c/mtime typo
fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
fs/ntfs3: Add and fix comments
fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
fs/ntfs3: Implement super_operations::shutdown
fs/ntfs3: Drop suid and sgid bits as a part of fpunch
fs/ntfs3: Add file_modified
fs/ntfs3: Correct use bh_read
...
|
|
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f53 ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix missing TLB flush during early boot on SPARSEMEM_VMEMMAP
configurations
- fixes to correctly implement the break-before-make behavior requried
by the ISA for NAPOT mappings
- fix a missing TLB flush on intermediate mapping changes
- fix build warning about a missing declaration of overflow_stack
- fix performace regression related to incorrect tracking of completed
batch TLB flushes
* tag 'riscv-for-linus-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix arch_tlbbatch_flush() by clearing the batch cpumask
riscv: declare overflow_stack as exported from traps.c
riscv: Fix arch_hugetlb_migration_supported() for NAPOT
riscv: Flush the tlb when a page directory is freed
riscv: Fix hugetlb_mask_last_page() when NAPOT is enabled
riscv: Fix set_huge_pte_at() for NAPOT mapping
riscv: mm: execute local TLB flush after populating vmemmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix broken direct trampolines being called when another callback is
attached the same function.
ARM 64 does not support FTRACE_WITH_REGS, and when it added direct
trampoline calls from ftrace, it removed the "WITH_REGS" flag from
the ftrace_ops for direct trampolines. This broke x86 as x86 requires
direct trampolines to have WITH_REGS.
This wasn't noticed because direct trampolines work as long as the
function it is attached to is not shared with other callbacks (like
the function tracer). When there are other callbacks, a helper
trampoline is called, to call all the non direct callbacks and when
it returns, the direct trampoline is called.
For x86, the direct trampoline sets a flag in the regs field to tell
the x86 specific code to call the direct trampoline. But this only
works if the ftrace_ops had WITH_REGS set. ARM does things
differently that does not require this. For now, set WITH_REGS if the
arch supports WITH_REGS (which ARM does not), and this makes it work
for both ARM64 and x86.
- Fix wasted memory in the saved_cmdlines logic.
The saved_cmdlines is a cache that maps PIDs to COMMs that tracing
can use. Most trace events only save the PID in the event. The
saved_cmdlines file lists PIDs to COMMs so that the tracing tools can
show an actual name and not just a PID for each event. There's an
array of PIDs that map to a small set of saved COMM strings. The
array is set to PID_MAX_DEFAULT which is usually set to 32768. When a
PID comes in, it will add itself to this array along with the index
into the COMM array (note if the system allows more than
PID_MAX_DEFAULT, this cache is similar to cache lines as an update of
a PID that has the same PID_MAX_DEFAULT bits set will flush out
another task with the same matching bits set).
A while ago, the size of this cache was changed to be dynamic and the
array was moved into a structure and created with kmalloc(). But this
new structure had the size of 131104 bytes, or 0x20020 in hex. As
kmalloc allocates in powers of two, it was actually allocating
0x40000 bytes (262144) leaving 131040 bytes of wasted memory. The
last element of this structure was a pointer to the COMM string array
which defaulted to just saving 128 COMMs.
By changing the last field of this structure to a variable length
string, and just having it round up to fill the allocated memory, the
default size of the saved COMM cache is now 8190. This not only uses
the wasted space, but actually saves space by removing the extra
allocation for the COMM names.
* tag 'trace-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix wasted memory in saved_cmdlines logic
ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- remove unnecessary initial values of kprobes local variables
- probe-events parser bug fixes:
- calculate the argument size and format string after setting type
information from BTF, because BTF can change the size and format
string.
- show $comm parse error correctly instead of failing silently.
* tag 'probes-fixes-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unnecessary initial values of variables
tracing/probes: Fix to set arg size and fmt after setting type from BTF
tracing/probes: Fix to show a parse error for bad type for $comm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The only notable change here is the patch that changes the way we deal
with spurious errors from the EFI memory attribute protocol. This will
be backported to v6.6, and is intended to ensure that we will not
paint ourselves into a corner when we tighten this further in order to
comply with MS requirements on signed EFI code.
Note that this protocol does not currently exist in x86 production
systems in the field, only in Microsoft's fork of OVMF, but it will be
mandatory for Windows logo certification for x86 PCs in the future.
- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously
on x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on
x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec"
* tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
cxl/trace: Remove unnecessary memcpy's
cxl/cper: Fix errant CPER prints for CXL events
efi: Don't add memblocks for soft-reserved memory
efi: runtime: Fix potential overflow of soft-reserved region size
efi/libstub: Add one kernel-doc comment
x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
x86/efistub: Give up if memory attribute protocol returns an error
riscv/efistub: Tighten ELF relocation check
riscv/efistub: Ensure GP-relative addressing is not used
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Fix an unintentional truncation of DWC MSI-X address to 32 bits and
update similar MSI code to match (Dan Carpenter)
* tag 'pci-v6.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignment
PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- coretemp: Various fixes, and increase number of supported CPU cores
- aspeed-pwm-tacho: Add missing mutex protection
* tag 'hwmon-for-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (coretemp) Enlarge per package core count limit
hwmon: (coretemp) Fix bogus core_id to attr name mapping
hwmon: (coretemp) Fix out-of-bounds memory access
hwmon: (aspeed-pwm-tacho) mutex for tach reading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Allow non-sleeping read-only slot-gpio
MMC host:
- sdhci-pci-o2micro: Fix a warm reboot BIOS issue"
* tag 'mmc-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: slot-gpio: Allow non-sleeping GPIO ro
mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected by BIOS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Move the unused cleanup to a _sync initcall
Providers:
- mediatek: Fix race conditions at probe/remove with genpd
- renesas: r8a77980-sysc: CR7 must be always on"
* tag 'pmdomain-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: fix race conditions with genpd
pmdomain: renesas: r8a77980-sysc: CR7 must be always on
pmdomain: core: Move the unused cleanup to a _sync initcall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- remove the new GPIO device from the global list unconditionally in
error path in core GPIOLIB
* tag 'gpio-fixes-for-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: remove GPIO device from the list unconditionally in error path
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, xe, amdgpu and msm are most of them, with some
misc in i915, ivpu and nouveau, scattered but nothing too intense at
this point.
i915:
- gvt: docs fix, uninit var, MAINTAINERS
ivpu:
- add aborted job status
- disable d3 hot delay
- mmu fixes
nouveau:
- fix gsp rpc size request
- fix dma buffer leaks
- use common code for gsp mem ctor
xe:
- Fix a loop in an error path
- Fix a missing dma-fence reference
- Fix a retry path on userptr REMAP
- Workaround for a false gcc warning
- Fix missing map of the usm batch buffer in the migrate vm.
- Fix a memory leak.
- Fix a bad assumption of used page size
- Fix hitting a BUG() due to zero pages to map.
- Remove some leftover async bind queue relics
amdgpu:
- Misc NULL/bounds check fixes
- ODM pipe policy fix
- Aborted suspend fixes
- JPEG 4.0.5 fix
- DCN 3.5 fixes
- PSP fix
- DP MST fix
- Phantom pipe fix
- VRAM vendor fix
- Clang fix
- SR-IOV fix
msm:
- DPU:
- fix for kernel doc warnings and smatch warnings in dpu_encoder
- fix for smatch warning in dpu_encoder
- fix the bus bandwidth value for SDM670
- DP:
- fixes to handle unknown bpc case correctly for DP
- fix for MISC0 programming
- GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable"
* tag 'drm-fixes-2024-02-09' of git://anongit.freedesktop.org/drm/drm: (43 commits)
drm/xe: Remove TEST_VM_ASYNC_OPS_ERROR
drm/xe/vm: don't ignore error when in_kthread
drm/xe: Assume large page size if VMA not yet bound
drm/xe/display: Fix memleak in display initialization
drm/xe: Map both mem.kernel_bb_pool and usm.bb_pool
drm/xe: circumvent bogus stringop-overflow warning
drm/xe: Pick correct userptr VMA to repin on REMAP op failure
drm/xe: Take a reference in xe_exec_queue_last_fence_get()
drm/xe: Fix loop in vm_bind_ioctl_ops_unwind
drm/amdgpu: Fix HDP flush for VFs on nbio v7.9
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
drm/amd/display: Increase frame-larger-than for all display_mode_vba files
drm/amd/display: Clear phantom stream count and plane count
drm/amdgpu: Avoid fetching VRAM vendor info
drm/amd/display: Disable ODM by default for DCN35
drm/amd/display: Update phantom pipe enable / disable sequence
drm/amd/display: Fix MST Null Ptr for RV
drm/amdgpu: Fix shared buff copy to user
drm/amd/display: Increase eval/entry delay for DCN35
drm/amdgpu: remove asymmetrical irq disabling in jpeg 4.0.5 suspend
...
|
|
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
|
|
While looking at improving the saved_cmdlines cache I found a huge amount
of wasted memory that should be used for the cmdlines.
The tracing data saves pids during the trace. At sched switch, if a trace
occurred, it will save the comm of the task that did the trace. This is
saved in a "cache" that maps pids to comms and exposed to user space via
the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by
default 128 comms.
The structure that uses this creates an array to store the pids using
PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure
to be of the size of 131104 bytes on 64 bit machines.
In hex: 131104 = 0x20020, and since the kernel allocates generic memory in
powers of two, the kernel would allocate 0x40000 or 262144 bytes to store
this structure. That leaves 131040 bytes of wasted space.
Worse, the structure points to an allocated array to store the comm names,
which is 16 bytes times the amount of names to save (currently 128), which
is 2048 bytes. Instead of allocating a separate array, make the structure
end with a variable length string and use the extra space for that.
This is similar to a recommendation that Linus had made about eventfs_inode names:
https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/
Instead of allocating a separate string array to hold the saved comms,
have the structure end with: char saved_cmdlines[]; and round up to the
next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN
It will use this extra space for the saved_cmdline portion.
Now, instead of saving only 128 comms by default, by using this wasted
space at the end of the structure it can save over 8000 comms and even
saves space by removing the need for allocating the other array.
Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The commit 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS
and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there
are multiple ftrace_ops at the same function, but since the x86 only
support to jump to direct_call from ftrace_regs_caller, when we set
the function tracer on the same target function on x86, ftrace-direct
does not work as below (this actually works on arm64.)
At first, insmod ftrace-direct.ko to put a direct_call on
'wake_up_process()'.
# insmod kernel/samples/ftrace/ftrace-direct.ko
# less trace
...
<idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63
<idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63
Setup a function filter to the 'wake_up_process' too, and enable it.
# cd /sys/kernel/tracing/
# echo wake_up_process > set_ftrace_filter
# echo function > current_tracer
# less trace
...
<idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn
<idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn
<idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool
<idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool
Then, only function tracer is shown on x86.
But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag)
on the same function, it is shown again.
# echo 'p wake_up_process' >> dynamic_events
# echo 1 > events/kprobes/p_wake_up_process_0/enable
# echo > trace
# less trace
...
<idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17
To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of
direct_call by default.
Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2
Fixes: 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS")
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.8-rc4
DPU:
- fix for kernel doc warnings and smatch warnings in dpu_encoder
- fix for smatch warning in dpu_encoder
- fix the bus bandwidth value for SDM670
DP:
- fixes to handle unknown bpc case correctly for DP. The current code was
spilling over into other bits of DP configuration register, had to be
fixed to avoid the extra shifts which were causing the spill over
- fix for MISC0 programming in DP driver to program the correct
colorimetry value
GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv+tb1+_cp7ftxcMZbbxE9810rvxeaC50eL=msQ+zkm0g@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-02-08:
amdgpu:
- Misc NULL/bounds check fixes
- ODM pipe policy fix
- Aborted suspend fixes
- JPEG 4.0.5 fix
- DCN 3.5 fixes
- PSP fix
- DP MST fix
- Phantom pipe fix
- VRAM vendor fix
- Clang fix
- SR-IOV fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208165500.4887-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Just includes gvt-fixes-2024-02-05
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZcTETgXsejwVwat6@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix a loop in an error path
- Fix a missing dma-fence reference
- Fix a retry path on userptr REMAP
- Workaround for a false gcc warning
- Fix missing map of the usm batch buffer
in the migrate vm.
- Fix a memory leak.
- Fix a bad assumption of used page size
- Fix hitting a BUG() due to zero pages to map.
- Remove some leftover async bind queue relics
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZcS2LllawGifubsk@fedora
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A null pointer dereference fix for v3d, a TTM pool initialization fix,
several fixes for nouveau around register size, DMA buffer leaks and API
consistency, a multiple fixes for ivpu around MMU setup, initialization
and firmware interactions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4wsi2i6kgkqdu7nzp4g7hxasbswnrmc5cakgf5zzvnix53u7lr@4rmp7hwblow3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts"
* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
netfilter: ipset: Missing gc cancellations fixed
octeontx2-af: Initialize maps.
net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
net: intel: fix old compiler regressions
MAINTAINERS: Maintainer change for rds
selftests: cmsg_ipv6: repeat the exact packet
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fix from Linus Walleij:
"A single fix for the AMD driver which affects developer laptops, the
pinctrl/GPIO driver won't probe on some systems"
* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)"
* tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme:
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
nvme-host: fix the updating of the firmware version
|
|
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Send query dir requests with an info level of
SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than
SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own
inode numbers (e.g. noserverino) so that reparse tags still
can be parsed directly from the responses, but server won't
send UniqueId (server inode number)
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Address static checker warning in cifs_ses_get_chan_index():
warn: variable dereferenced before check 'server'
To be consistent, and reduce risk, we should add another check
for null server pointer.
Fixes: 88675b22d34e ("cifs: do not search for channel if server is terminating")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|