aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-31r8169: don't increment tx_dropped in case of NETDEV_TX_BUSYHeiner Kallweit1-6/+2
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't increment the tx_dropped counter. Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}") Cc: stable@vger.kernel.org Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-31Merge tag 'for-netdev' of ↵Jakub Kicinski2-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-07-31 We've added 2 non-merge commits during the last 2 day(s) which contain a total of 2 files changed, 2 insertions(+), 2 deletions(-). The main changes are: 1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE macro redefined compilation error, from Stanislav Fomichev. 2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest, from Jiri Olsa. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp ==================== Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30Merge branch '100GbE' of ↵Jakub Kicinski6-90/+135
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: fix AF_XDP ZC timeout and concurrency issues Maciej Fijalkowski says: Changes included in this patchset address an issue that customer has been facing when AF_XDP ZC Tx sockets were used in combination with flow control and regular Tx traffic. After executing: ethtool --set-priv-flags $dev link-down-on-close on ethtool -A $dev rx on tx on launching multiple ZC Tx sockets on $dev + pinging remote interface (so that regular Tx traffic is present) and then going through down/up of $dev, Tx timeout occurred and then most of the time ice driver was unable to recover from that state. These patches combined together solve the described above issue on customer side. Main focus here is to forbid producing Tx descriptors when either carrier is not yet initialized or process of bringing interface down has already started. v1: https://lore.kernel.org/netdev/20240708221416.625850-1-anthony.l.nguyen@intel.com/ * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: xsk: fix txq interrupt mapping ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog ice: improve updating ice_{t,r}x_ring::xsk_pool ice: toggle netif_carrier when setting up XSK pool ice: modify error handling when setting XSK pool in ndo_bpf ice: replace synchronize_rcu with synchronize_net ice: don't busy wait for Rx queue disable in ice_qp_dis() ice: respect netif readiness in AF_XDP ZC related ndo's ==================== Link: https://patch.msgid.link/20240729200716.681496-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net: drop bad gso csum_start and offset in virtio_net_hdrWillem de Bruijn3-11/+12
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871 Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org Fixes: e269d79c7d35 ("net: missing check virtio") Cc: stable@vger.kernel.org Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net: phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115cBartosz Golaszewski1-8/+21
Commit 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to start returning real values") introduced a workaround for an issue observed on aqr115c. However there were never any reports of it happening on other models and the workaround has been reported to cause and issue on aqr113c (and it may cause the same on any other model not supporting 10M mode). Let's limit the impact of the workaround to aqr113, aqr113c and aqr115c and poll the 100M GLOBAL_CFG register instead as both models are known to support it correctly. Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/lkml/7c0140be-4325-4005-9068-7e0fc5ff344d@nvidia.com/ Fixes: 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to start returning real values") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://patch.msgid.link/20240729150315.65798-1-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net: phy: micrel: Fix the KSZ9131 MDI-X status issueRaju Lakkaraju1-15/+19
The MDIX status is not accurately reflecting the current state after the link partner has manually altered its MDIX configuration while operating in forced mode. Access information about Auto mdix completion and pair selection from the KSZ9131's Auto/MDI/MDI-X status register Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall testJiri Olsa1-1/+1
Fixing ASSERT_OK condition check in uprobe_syscall test, otherwise we return from test on pipe success. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20240726180847.684584-1-jolsa@kernel.org
2024-07-30net: mvpp2: Don't re-use loop iteratorDan Carpenter1-3/+3
This function has a nested loop. The problem is that both the inside and outside loop use the same variable as an iterator. I found this via static analysis so I'm not sure the impact. It could be that it loops forever or, more likely, the loop exits early. Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net/iucv: fix use after free in iucv_sock_close()Alexandra Winter1-2/+2
iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/ Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely") Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30net/smc: prevent UAF in inet_create()D. Wythe1-3/+4
Following syzbot repro crashes the kernel: socketpair(0x2, 0x1, 0x100, &(0x7f0000000140)) (fail_nth: 13) Fix this by not calling sk_common_release() from smc_create_clcsk(). Stack trace: socket: no more sockets ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5092 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 5092 Comm: syz-executor424 Not tainted 6.10.0-syzkaller-04483-g0be9ae5486cd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Code: 80 f3 1f 8c e8 e7 69 a8 fc 90 0f 0b 90 90 eb 99 e8 cb 4f e6 fc c6 05 8a 8d e8 0a 01 90 48 c7 c7 e0 f3 1f 8c e8 c7 69 a8 fc 90 <0f> 0b 90 90 e9 76 ff ff ff e8 a8 4f e6 fc c6 05 64 8d e8 0a 01 90 RSP: 0018:ffffc900034cfcf0 EFLAGS: 00010246 RAX: 3b9fcde1c862f700 RBX: ffff888022918b80 RCX: ffff88807b39bc00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000003 R08: ffffffff815878a2 R09: fffffbfff1c39d94 R10: dffffc0000000000 R11: fffffbfff1c39d94 R12: 00000000ffffffe9 R13: 1ffff11004523165 R14: ffff888022918b28 R15: ffff888022918b00 FS: 00005555870e7380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000007582e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> inet_create+0xbaf/0xe70 __sock_create+0x490/0x920 net/socket.c:1571 sock_create net/socket.c:1622 [inline] __sys_socketpair+0x2ca/0x720 net/socket.c:1769 __do_sys_socketpair net/socket.c:1822 [inline] __se_sys_socketpair net/socket.c:1819 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbcb9259669 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 a1 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffe931c6d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 00007fffe931c6f0 RCX: 00007fbcb9259669 RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000002 RBP: 0000000000000002 R08: 00007fffe931c476 R09: 00000000000000a0 R10: 0000000020000140 R11: 0000000000000246 R12: 00007fffe931c6ec R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK> Link: https://lore.kernel.org/r/20240723175809.537291-1-edumazet@google.com/ Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/1722224415-30999-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30Merge branch 'mptcp-fix-inconsistent-backup-usage'Paolo Abeni11-21/+132
Matthieu Baerts says: ==================== mptcp: fix inconsistent backup usage In all the MPTCP backup related tests, the backup flag was set on one side, and the expected behaviour is to have both sides respecting this decision. That's also the "natural" way, and what the users seem to expect. On the scheduler side, only the 'backup' field was checked, which is supposed to be set only if the other peer flagged a subflow as backup. But in various places, this flag was also set when the local host flagged the subflow as backup, certainly to have the expected behaviour mentioned above. Patch 1 modifies the packet scheduler to check if the backup flag has been set on both directions, not to change its behaviour after having applied the following patches. That's what the default packet scheduler should have done since the beginning in v5.7. Patch 2 fixes the backup flag being mirrored on the MPJ+SYN+ACK by accident since its introduction in v5.7. Instead, the received and sent backup flags are properly distinguished in requests. Patch 3 stops setting the received backup flag as well when sending an MP_PRIO, something that was done since the MP_PRIO support in v5.12. Patch 4 adds related and missing MIB counters to be able to easily check if MP_JOIN are sent with a backup flag. Certainly because these counters were not there, the behaviour that is fixed by patches here was not properly verified. Patch 5 validates the previous patch by extending the MPTCP Join selftest. Patch 6 fixes the backup support in signal endpoints: if a signal endpoint had the backup flag, it was not set in the MPJ+SYN+ACK as expected. It was only set for ongoing connections, but not future ones as expected, since the introduction of the backup flag in endpoints in v5.10. Patch 7 validates the previous patch by extending the MPTCP Join selftest as well. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> --- Matthieu Baerts (NGI0) (7): mptcp: sched: check both directions for backup mptcp: distinguish rcv vs sent backup flag in requests mptcp: pm: only set request_bkup flag when sending MP_PRIO mptcp: mib: count MPJ with backup flag selftests: mptcp: join: validate backup in MPJ mptcp: pm: fix backup support in signal endpoints selftests: mptcp: join: check backup support in signal endp include/trace/events/mptcp.h | 2 +- net/mptcp/mib.c | 2 + net/mptcp/mib.h | 2 + net/mptcp/options.c | 2 +- net/mptcp/pm.c | 12 +++++ net/mptcp/pm_netlink.c | 19 ++++++- net/mptcp/pm_userspace.c | 18 +++++++ net/mptcp/protocol.c | 10 ++-- net/mptcp/protocol.h | 4 ++ net/mptcp/subflow.c | 10 ++++ tools/testing/selftests/net/mptcp/mptcp_join.sh | 72 ++++++++++++++++++++----- 11 files changed, 132 insertions(+), 21 deletions(-) ==================== Link: https://patch.msgid.link/20240727-upstream-net-20240727-mptcp-backup-signal-v1-0-f50b31604cf1@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30selftests: mptcp: join: check backup support in signal endpMatthieu Baerts (NGI0)1-6/+28
Before the previous commit, 'signal' endpoints with the 'backup' flag were ignored when sending the MP_JOIN. The MPTCP Join selftest has then been modified to validate this case: the "single address, backup" test, is now validating the MP_JOIN with a backup flag as it is what we expect it to do with such name. The previous version has been kept, but renamed to "single address, switch to backup" to avoid confusions. The "single address with port, backup" test is also now validating the MPJ with a backup flag, which makes more sense than checking the switch to backup with an MP_PRIO. The "mpc backup both sides" test is now validating that the backup flag is also set in MP_JOIN from and to the addresses used in the initial subflow, using the special ID 0. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: fix backup support in signal endpointsMatthieu Baerts (NGI0)5-0/+54
There was a support for signal endpoints, but only when the endpoint's flag was changed during a connection. If an endpoint with the signal and backup was already present, the MP_JOIN reply was not containing the backup flag as expected. That's confusing to have this inconsistent behaviour. On the other hand, the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was already there, it was just never set before. Now when requesting the local ID from the path-manager, the backup status is also requested. Note that when the userspace PM is used, the backup flag can be set if the local address was already used before with a backup flag, e.g. if the address was announced with the 'backup' flag, or a subflow was created with the 'backup' flag. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30selftests: mptcp: join: validate backup in MPJMatthieu Baerts (NGI0)1-10/+32
A peer can notify the other one that a subflow has to be treated as "backup" by two different ways: either by sending a dedicated MP_PRIO notification, or by setting the backup flag in the MP_JOIN handshake. The selftests were previously monitoring the former, but not the latter. This is what is now done here by looking at these new MIB counters when validating the 'backup' cases: MPTcpExtMPJoinSynBackupRx MPTcpExtMPJoinSynAckBackupRx The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it will help to validate a new fix for an issue introduced by this commit ID. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: mib: count MPJ with backup flagMatthieu Baerts (NGI0)3-0/+10
Without such counters, it is difficult to easily debug issues with MPJ not having the backup flags on production servers. This is not strictly a fix, but it eases to validate the following patches without requiring to take packet traces, to query ongoing connections with Netlink with admin permissions, or to guess by looking at the behaviour of the packet scheduler. Also, the modification is self contained, isolated, well controlled, and the increments are done just after others, there from the beginning. It looks then safe, and helpful to backport this. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: only set request_bkup flag when sending MP_PRIOMatthieu Baerts (NGI0)1-1/+0
The 'backup' flag from mptcp_subflow_context structure is supposed to be set only when the other peer flagged a subflow as backup, not the opposite. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: distinguish rcv vs sent backup flag in requestsMatthieu Baerts (NGI0)3-1/+3
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow as 'backup' by setting the flag with the same name. Before this patch, the backup was set if the other peer set it in its MP_JOIN + SYN request. It is not correct: the backup flag should be set in the MPJ+SYN+ACK only if the host asks for it, and not mirroring what was done by the other peer. It is then required to have a dedicated bit for each direction, similar to what is done in the subflow context. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: sched: check both directions for backupMatthieu Baerts (NGI0)2-5/+7
The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Before this patch, the scheduler was only looking at the 'backup' flag. That can make sense in some cases, but it looks like that's not what we wanted for the general use, because either the path-manager was setting both of them when sending an MP_PRIO, or the receiver was duplicating the 'backup' flag in the subflow request. Note that the use of these two flags in the path-manager are going to be fixed in the next commits, but this change here is needed not to modify the behaviour. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-29selftests/bpf: Filter out _GNU_SOURCE when compiling test_cppStanislav Fomichev1-1/+1
Jakub reports build failures when merging linux/master with net tree: CXX test_cpp In file included from <built-in>:454: <command line>:2:9: error: '_GNU_SOURCE' macro redefined [-Werror,-Wmacro-redefined] 2 | #define _GNU_SOURCE | ^ <built-in>:445:9: note: previous definition is here 445 | #define _GNU_SOURCE 1 The culprit is commit cc937dad85ae ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk") which unconditionally added -D_GNU_SOUCE to CLFAGS. Apparently clang++ also unconditionally adds it for the C++ targets [0] which causes a conflict. Add small change in the selftests makefile to filter it out for test_cpp. Not sure which tree it should go via, targeting bpf for now, but net might be better? 0: https://stackoverflow.com/questions/11670581/why-is-gnu-source-defined-by-default-and-how-to-turn-it-off Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240725214029.1760809-1-sdf@fomichev.me
2024-07-29ice: xsk: fix txq interrupt mappingMaciej Fijalkowski1-10/+14
ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to treat XDP ring that belongs to queue vector as Tx ring and therefore misconfiguring the interrupts. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_progMaciej Fijalkowski1-1/+1
It is read by data path and modified from process context on remote cpu so it is needed to use WRITE_ONCE to clear the pointer. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: improve updating ice_{t,r}x_ring::xsk_poolMaciej Fijalkowski6-55/+87
xsk_buff_pool pointers that ice ring structs hold are updated via ndo_bpf that is executed in process context while it can be read by remote CPU at the same time within NAPI poll. Use synchronize_net() after pointer update and {READ,WRITE}_ONCE() when working with mentioned pointer. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: toggle netif_carrier when setting up XSK poolMaciej Fijalkowski1-1/+7
This so we prevent Tx timeout issues. One of conditions checked on running in the background dev_watchdog() is netif_carrier_ok(), so let us turn it off when we disable the queues that belong to a q_vector where XSK pool is being configured. Turn carrier on in ice_qp_ena() only when ice_get_link_status() tells us that physical link is up. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: modify error handling when setting XSK pool in ndo_bpfMaciej Fijalkowski1-14/+16
Don't bail out right when spotting an error within ice_qp_{dis,ena}() but rather track error and go through whole flow of disabling and enabling queue pair. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: replace synchronize_rcu with synchronize_netMaciej Fijalkowski1-5/+4
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can be called instead of synchronize_rcu() so that XDP rings can finish its job in a faster way. Also let us do this as earlier in XSK queue disable flow. Additionally, turn off regular Tx queue before disabling irqs and NAPI. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: don't busy wait for Rx queue disable in ice_qp_dis()Maciej Fijalkowski1-3/+1
When ice driver is spammed with multiple xdpsock instances and flow control is enabled, there are cases when Rx queue gets stuck and unable to reflect the disable state in QRX_CTRL register. Similar issue has previously been addressed in commit 13a6233b033f ("ice: Add support to enable/disable all Rx queues before waiting"). To workaround this, let us simply not wait for a disabled state as later patch will make sure that regardless of the encountered error in the process of disabling a queue pair, the Rx queue will be enabled. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: respect netif readiness in AF_XDP ZC related ndo'sMichal Kubiak1-1/+5
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx ring when link is either not yet fully initialized or process of stopping the netdev has already started. To avoid this, add checks against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc(). One could argue that bailing out early in ice_xsk_wakeup() would be sufficient but given the fact that we produce Tx descriptors on behalf of NAPI that is triggered for Rx traffic, the latter is also needed. Bringing link up is an asynchronous event executed within ice_service_task so even though interface has been brought up there is still a time frame where link is not yet ok. Without this patch, when AF_XDP ZC Tx is used simultaneously with stack Tx, Tx timeouts occur after going through link flap (admin brings interface down then up again). HW seem to be unable to transmit descriptor to the wire after HW tail register bump which in turn causes bit __QUEUE_STATE_STACK_XOFF to be set forever as netdev_tx_completed_queue() sees no cleaned bytes on the input. Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29Merge branch 'mptcp-endpoint-readd-fixes' into mainDavid S. Miller3-13/+53
Matthieu Baerts says: ==================== mptcp: fix signal endpoint readd Issue #501 [1] showed that the Netlink PM currently doesn't correctly support removal and re-add of signal endpoints. Patches 1 and 2 address the issue: the first one in the userspace path- manager, introduced in v5.19 ; and the second one in the in-kernel path- manager, introduced in v5.7. Patch 3 introduces a related selftest. There is no 'Fixes' tag, because it might be hard to backport it automatically, as missing helpers in Bash will not be caught when compiling the kernel or the selftests. The last two patches address two small issues in the MPTCP selftests, one introduced in v6.6., and the other one in v5.17. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501 [1] ==================== Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29selftests: mptcp: always close input's FD if openedLiu Jing1-4/+4
In main_loop_s function, when the open(cfg_input, O_RDONLY) function is run, the last fd is not closed if the "--cfg_repeat > 0" branch is not taken. Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29selftests: mptcp: fix error pathPaolo Abeni1-1/+1
pm_nl_check_endpoint() currently calls an not existing helper to mark the test as failed. Fix the wrong call. Fixes: 03668c65d153 ("selftests: mptcp: join: rework detailed report") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29selftests: mptcp: add explicit test case for remove/readdPaolo Abeni1-0/+29
Delete and re-create a signal endpoint and ensure that the PM actually deletes and re-create the subflow. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29mptcp: fix NL PM announced address accountingPaolo Abeni1-4/+6
Currently the per connection announced address counter is never decreased. As a consequence, after connection establishment, if the NL PM deletes an endpoint and adds a new/different one, no additional subflow is created for the new endpoint even if the current limits allow that. Address the issue properly updating the signaled address counter every time the NL PM removes such addresses. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29mptcp: fix user-space PM announced address accountingPaolo Abeni1-4/+13
Currently the per-connection announced address counter is never decreased. When the user-space PM is in use, this just affect the information exposed via diag/sockopt, but it could still foul the PM to wrong decision. Add the missing accounting for the user-space PM's sake. Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29rtnetlink: Don't ignore IFLA_TARGET_NETNSID when ifname is specified in ↵Kuniyuki Iwashima1-1/+1
rtnl_dellink(). The cited commit accidentally replaced tgt_net with net in rtnl_dellink(). As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified with IFLA_IFNAME or IFLA_ALT_IFNAME. Let's pass tgt_net to rtnl_dev_get(). Fixes: cc6090e985d7 ("net: rtnetlink: introduce helper to get net_device instance by ifname") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29net: axienet: start napi before enabling Rx/TxAndy Chiu1-1/+1
softirq may get lost if an Rx interrupt comes before we call napi_enable. Move napi_enable in front of axienet_setoptions(), which turns on the device, to address the issue. Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tcp: Adjust clamping window for applications specifying SO_RCVBUFSubash Abhinov Kasiviswanathan1-7/+16
tp->scaling_ratio is not updated based on skb->len/skb->truesize once SO_RCVBUF is set leading to the maximum window scaling to be 25% of rcvbuf after commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") and 50% of rcvbuf after commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"). 50% tries to emulate the behavior of older kernels using sysctl_tcp_adv_win_scale with default value. Systems which were using a different values of sysctl_tcp_adv_win_scale in older kernels ended up seeing reduced download speeds in certain cases as covered in https://lists.openwall.net/netdev/2024/05/15/13 While the sysctl scheme is no longer acceptable, the value of 50% is a bit conservative when the skb->len/skb->truesize ratio is later determined to be ~0.66. Applications not specifying SO_RCVBUF update the window scaling and the receiver buffer every time data is copied to userspace. This computation is now used for applications setting SO_RCVBUF to update the maximum window scaling while ensuring that the receive buffer is within the application specified limit. Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29Merge branch 'ethtool-rss-fixes' into mainDavid S. Miller3-15/+79
Jakub Kicinski says; ==================== ethtool: more RSS fixes More fixes for RSS setting. First two patches fix my own bugs in bnxt conversion to the new API. The third patch fixes what seems to be a 10 year old issue (present since the Linux RSS API was created). Fourth patch fixes an issue with the XArray state being out of sync. And then a small test. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29selftests: drv-net: rss_ctx: check for all-zero keysJakub Kicinski1-3/+34
We had a handful of bugs relating to key being either all 0 or just reported incorrectly as all 0. Check for this in the tests. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix the state of additional contexts with old APIJakub Kicinski1-8/+30
We expect drivers implementing the new create/modify/destroy API to populate the defaults in struct ethtool_rxfh_context. In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key are NULL so drivers can't give us defaults even if they want to. Call get_rxfh() to fetch the values. We can reuse rxfh_dev for the get_rxfh(), rxfh stores the input from the user. This fixes IOCTL reporting 0s instead of the default key / indir table for drivers using legacy API. Add a check to try to catch drivers using the new API but not populating the key. Fixes: 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix setting key and resetting indir at onceJakub Kicinski1-2/+3
The indirection table and the key follow struct ethtool_rxfh in user memory. To reset the indirection table user space calls SET_RXFH with table of size 0 (OTOH to say "no change" it should use -1 / ~0). The logic for calculating the offset where they key sits is incorrect in this case, as kernel would still offset by the full table length, while for the reset there is no indir table and key is immediately after the struct. $ ethtool -X eth0 default hkey 01:02:03... $ ethtool -x eth0 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 [...] Fixes: 3de0b592394d ("ethtool: Support for configurable RSS hash key") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29eth: bnxt: populate defaults in the RSS context structJakub Kicinski1-0/+4
As described in the kdoc for .create_rxfh_context we are responsible for populating the defaults. The core will not call .get_rxfh for non-0 context. The problem can be easily observed since Netlink doesn't currently use the cache. Using netlink ethtool: $ ethtool -x eth0 context 1 [...] RSS hash key: 13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c RSS hash function: toeplitz: on xor: off crc32: off But using IOCTL ethtool shows: $ ./ethtool-old -x eth0 context 1 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 RSS hash function: Operation not supported Fixes: 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29eth: bnxt: reject unsupported hash functionsJakub Kicinski1-2/+8
In commit under Fixes I split the bnxt_set_rxfh_context() function, and attached the appropriate chunks to new ops. I missed that bnxt_set_rxfh_context() gets called after some initial checks in bnxt_set_rxfh(), namely that the hash function is Toeplitz. Fixes: 5c466b4d4e75 ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tun: Add missing bpf_net_ctx_clear() in do_xdp_generic()Jeongjun Park1-0/+1
There are cases where do_xdp_generic returns bpf_net_context without clearing it. This causes various memory corruptions, so the missing bpf_net_ctx_clear must be added. Reported-by: syzbot+44623300f057a28baf1e@syzkaller.appspotmail.com Fixes: fecef4cd42c6 ("tun: Assign missing bpf_net_context.") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reported-by: syzbot+3c2b6d5d4bec3b904933@syzkaller.appspotmail.com Reported-by: syzbot+707d98c8649695eaf329@syzkaller.appspotmail.com Reported-by: syzbot+c226757eb784a9da3e8b@syzkaller.appspotmail.com Reported-by: syzbot+61a1cfc2b6632363d319@syzkaller.appspotmail.com Reported-by: syzbot+709e4c85c904bcd62735@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-26Merge tag 'for-net-2024-07-26' of ↵Jakub Kicinski6-10/+33
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix kernel crash when entering btmtk_usb_suspend - btmtk: Fix btmtk.c undefined reference build error - btintel: Fail setup on error - hci_sync: Fix suspending with wrong filter policy - hci_event: Fix setting DISCOVERY_FINDING for passive scanning * tag 'for-net-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning Bluetooth: btmtk: remove #ifdef around declarations Bluetooth: btmtk: Fix btmtk.c undefined reference build error harder Bluetooth: btmtk: Fix btmtk.c undefined reference build error Bluetooth: hci_sync: Fix suspending with wrong filter policy Bluetooth: btmtk: Fix kernel crash when entering btmtk_usb_suspend Bluetooth: btintel: Fail setup on error ==================== Link: https://patch.msgid.link/20240726150502.3300832-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26fbnic: Change kconfig prompt from S390=n to !S390Alexander Duyck1-1/+1
In testing the recent kernel I found that the fbnic driver couldn't be enabled on x86_64 builds. A bit of digging showed that the fbnic driver was the only one to check for S390 to be n, all others had checked for !S390. Since it is a boolean and not a tristate I am not sure it will be N. So just update it to use the !S390 flag. A quick check via "make menuconfig" verified that after making this change there was an option to select the fbnic driver. Fixes 0e03c643dc93 ("eth: fbnic: fix s390 build.") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/172192698293.1903337.4255690118685300353.stgit@ahduyck-xeon-server.home.arpa Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Merge tag 'wireless-2024-07-26' of ↵Jakub Kicinski8-13/+25
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Couple of more urgent fixes: * ath12k: wowlan loop iteration issue * ath12k: fix soft lockup on suspend in certain scenarios * mt76: fix crash when removing an interface * mac80211: fix injection crash with some drivers that don't want monitor vif * cfg80211: fix S1G beacon parsing in scan * cfg80211: fix MLO link status reporting on connect * tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath12k: fix soft lockup on suspend wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() wifi: cfg80211: correct S1G beacon length calculation wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done wifi: mac80211: use monitor sdata with driver only if desired ==================== Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanningLuiz Augusto von Dentz2-9/+3
DISCOVERY_FINDING shall only be set for active scanning as passive scanning is not meant to generate MGMT Device Found events causing discovering state to go out of sync since userspace would believe it is discovering when in fact it is just passive scanning. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1ba38 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26Bluetooth: btmtk: remove #ifdef around declarationsArnd Bergmann1-2/+0
The caller of these functions in btusb.c is guarded with an if(IS_ENABLED()) style check, so dead code is left out, but the declarations are still needed at compile time: drivers/bluetooth/btusb.c: In function 'btusb_mtk_reset': drivers/bluetooth/btusb.c:2705:15: error: implicit declaration of function 'btmtk_usb_subsys_reset' [-Wimplicit-function-declaration] 2705 | err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id); | ^~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btusb.c: In function 'btusb_send_frame_mtk': drivers/bluetooth/btusb.c:2720:23: error: implicit declaration of function 'alloc_mtk_intr_urb' [-Wimplicit-function-declaration] 2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete); | ^~~~~~~~~~~~~~~~~~ drivers/bluetooth/btusb.c:2720:21: error: assignment to 'struct urb *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete); | ^ Fixes: f0c83a23fcbb ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26Bluetooth: btmtk: Fix btmtk.c undefined reference build error harderArnd Bergmann1-0/+2
The previous fix was incomplete as the link failure still persists with CONFIG_USB=m when the sdio or serial wrappers for btmtk.c are build-in: btmtk.c:(.text+0x468): undefined reference to `usb_alloc_urb' btmtk.c:(.text+0x488): undefined reference to `usb_free_urb' btmtk.c:(.text+0x500): undefined reference to `usb_anchor_urb' btmtk.c:(.text+0x50a): undefined reference to `usb_submit_urb' btmtk.c:(.text+0x92c): undefined reference to `usb_control_msg' btmtk.c:(.text+0xa92): undefined reference to `usb_unanchor_urb' btmtk.c:(.text+0x11e4): undefined reference to `usb_set_interface' btmtk.c:(.text+0x120a): undefined reference to `usb_kill_anchored_urbs' Disallow this configuration. Fixes: f0c83a23fcbb ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26Bluetooth: btmtk: Fix btmtk.c undefined reference build errorChris Lu2-0/+4
MediaTek moved some usb interface related function to btmtk.c which may cause build failed if BT USB Kconfig wasn't enabled. Fix undefined reference by adding config check. btmtk.c:(.text+0x89c): undefined reference to `usb_alloc_urb' btmtk.c:(.text+0x8e3): undefined reference to `usb_free_urb' btmtk.c:(.text+0x956): undefined reference to `usb_free_urb' btmtk.c:(.text+0xa0e): undefined reference to `usb_anchor_urb' btmtk.c:(.text+0xb43): undefined reference to `usb_autopm_get_interface' btmtk.c:(.text+0xb7e): undefined reference to `usb_autopm_put_interface' btmtk.c:(.text+0xf70): undefined reference to `usb_disable_autosuspend' btmtk.c:(.text+0x133a): undefined reference to `usb_control_msg' Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407091928.AH0aGZnx-lkp@intel.com/ Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.