| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
cleanup"
* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove an unneeded semicolon
LoongArch: Fix multiple hardware watchpoint issues
LoongArch: Trigger user-space watchpoints correctly
LoongArch: Fix watchpoint setting error
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
|
|
Pull drm fixes from Dave Airlie:
"Still pretty quiet, two weeks worth of amdgpu fixes, with one i915 and
one xe. I didn't get the drm-misc-fixes tree PR this week, but there
was only one fix queued and I think it can wait another week, so seems
pretty normal.
xe:
- Fix for invalid register access
i915:
- Fix conditions for joiner usage, it's not possible with eDP MSO
amdgpu:
- Fix display idle optimization race
- Fix GPUVM TLB flush locking scope
- IPS fix
- GFX 9.4.3 harvesting fix
- Runtime pm fix for shared buffers
- DCN 3.5.x fixes
- USB4 fix
- RISC-V clang fix
- Silence UBSAN warnings
- MES11 fix
- PSP 14.0.x fix"
* tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
drm/amdgpu: init TA fw for psp v14
drm/amdgpu: cleanup MES11 command submission
drm/amdgpu: fix UBSAN warning in kv_dpm.c
drm/radeon: fix UBSAN warning in kv_dpm.c
drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clang
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
drm/amd/display: change dram_clock_latency to 34us for dcn35
drm/amd/display: Change dram_clock_latency to 34us for dcn351
drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2
drm/amdgpu: Indicate CU havest info to CP
drm/amd/display: prevent register access while in IPS
drm/amdgpu: fix locking scope when flushing tlb
drm/amd/display: Remove redundant idle optimization check
drm/i915/mso: using joiner is not possible with eDP MSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, one originating in this cycle and one from 6.6"
* tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix encoding fid for lower only root
ovl: fix copy-up in tmpfile
|
|
Pull io_uring fix from Jens Axboe:
"Just a single cleanup for the fixed buffer iov_iter import.
More cosmetic than anything else, but let's get it cleaned up as it's
confusing"
* tag 'io_uring-6.10-20240621' of git://git.kernel.dk/linux:
io_uring/rsrc: fix incorrect assignment of iter->nr_segs in io_import_fixed
|
|
Pull rdma fixes from Jason Gunthorpe:
"Small bug fixes:
- Prevent a crash in bnxt if the en and rdma drivers disagree on the
MSI vectors
- Have rxe memcpy inline data from the correct address
- Fix rxe's validation of UD packets
- Several mlx5 mr cache issues: bad lock balancing on error, missing
propagation of the ATS property to the HW, wrong bucketing of freed
mrs in some cases
- Incorrect goto error unwind in mlx5 driver probe
- Missed userspace input validation in mlx5 SRQ create
- Incorrect uABI in MANA rejecting valid optional MR creation flags"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mana_ib: Ignore optional access flags for MRs
RDMA/mlx5: Add check for srq max_sge attribute
RDMA/mlx5: Fix unwind flow as part of mlx5_ib_stage_init_init
RDMA/mlx5: Ensure created mkeys always have a populated rb_key
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
RDMA/mlx5: Remove extra unlock on error path
RDMA/rxe: Fix responder length checking for UD request packets
RDMA/rxe: Fix data copy for IB_SEND_INLINE
RDMA/bnxt_re: Fix the max msix vectors macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound fixes from Takashi Iwai:
"A follow-up fix for a random build issue, as well as another trivial
HD-audio quirk"
* tag 'sound-6.10-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address a possible NULL pointer dereference in the ACPICA code
and quirk camera enumeration on multiple platforms where incorrect
data are present in the platform firmware.
Specifics:
- Undo an ACPICA code change that attempted to keep operation regions
within a page boundary, but allowed accesses to unmapped memory to
occur (Raju Rangoju)
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and
Raptor Lake models as that information is reported to be invalid on
the platforms in question (Hans de Goede)
- Use new Intel CPU model matching macros in the MIPI DisCo for
Imaging part of ACPI device enumeration (Hans de Goede)"
* tag 'acpi-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the Mediatek lvts_thermal driver, the Intel int340x driver,
and the thermal core (two issues related to system suspend).
Specifics:
- Remove the filtered mode for mt8188 from lvts_thermal as it is not
supported on this platform and fail the lvts_thermal initialization
when the golden temperature is zero as that means the efuse data is
not correctly set (Julien Panis)
- Update the processor_thermal part of the Intel int340x driver to
support shared interrupts as the processor thermal device interrupt
may in fact be shared with PCI devices (Srinivas Pandruvada)
- Synchronize the suspend-prepare and post-suspend actions of the
thermal PM notifier to avoid a destructive race condition and
change the priority of that notifier to the minimum to avoid
interference between the work items spawned by it and the other
PM notifiers during system resume (Rafael Wysocki)"
* tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: processor_thermal: Support shared interrupts
thermal: core: Change PM notifier priority to the minimum
thermal: core: Synchronize suspend-prepare and post-suspend actions
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- kmemleak, error path handling and missing kmem_cache_destroy() fixes
for ioatdma driver
- use after free fix for idxd driver
- data synchronisation fix for xdma isr handling
- fsl driver channel constraints and linking two fsl module fixes
* tag 'dmaengine-fix-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ioatdma: Fix missing kmem_cache_destroy()
dt-bindings: dma: fsl-edma: fix dma-channels constraints
dmaengine: fsl-edma: avoid linking both modules
dmaengine: ioatdma: Fix kmemleak in ioat_pci_probe()
dmaengine: ioatdma: Fix error path in ioat3_dma_probe()
dmaengine: ioatdma: Fix leaking on version mismatch
dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for missing register offsets and correct N4
offsets for registers
* tag 'phy-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-combo: Switch from V6 to V6 N4 register offsets
phy: qcom-qmp: pcs: Add missing v6 N4 register offsets
phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for calling fwnode_handle_put() on the
returned fwnode pointer
* tag 'soundwire-6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: fix usages of device_get_named_child_node()
|
|
into HEAD
KVM/riscv fixes for 6.10, take #2
- Fix compilation for KVM selftests
|
|
Ignore optional ib_access_flags when an MR is created.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <[email protected]>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee82 ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <[email protected]>
Reviewed-by: Patrisious Haddad <[email protected]>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: [email protected]
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: [email protected]
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: [email protected]
Fixes: 627122280c87 ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
KVM fixes for 6.10
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
|
|
With commit 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <[email protected]>
Cc: Nikunj A Dadhania <[email protected]>
Reported-by: Srikanth Aithal <[email protected]>
Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/
Fixes: 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption")
Signed-off-by: Michael Roth <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Merge ACPI device enumeration fixes for 6.10-rc5:
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and Raptor
Lake models as that information is reported to be invalid on the
systems in question (Hans de Goede).
- Use new Intel CPU model matching macros in the MIPI DisCo for Imaging
part of ACPI device enumeration (Hans de Goede).
* acpi-scan:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
|
|
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Fixes: 9b1effff19cd ("ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reviewed-by: Richard Fitzgerald <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker.
Cc: <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Pablo Caño <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Remove an unneeded semicolon to avoid build warnings:
./arch/loongarch/kvm/exit.c:764:2-3: Unneeded semicolon
Cc: [email protected]
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9343
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: [email protected]
Signed-off-by: Hui Li <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: [email protected]
Signed-off-by: Hui Li <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In the current code, when debugging the following code using gdb,
"invalid argument ..." message will be displayed.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Invalid argument setting hardware debug registers
There are mainly two types of issues.
1. Some incorrect judgment condition existed in user_watch_state
argument parsing, causing -EINVAL to be returned.
When setting up a watchpoint, gdb uses the ptrace interface,
ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)).
Register values in user_watch_state as follows:
addr[0] = 0x0, mask[0] = 0x0, ctrl[0] = 0x0
addr[1] = 0x0, mask[1] = 0x0, ctrl[1] = 0x0
addr[2] = 0x0, mask[2] = 0x0, ctrl[2] = 0x0
addr[3] = 0x0, mask[3] = 0x0, ctrl[3] = 0x0
addr[4] = 0x0, mask[4] = 0x0, ctrl[4] = 0x0
addr[5] = 0x0, mask[5] = 0x0, ctrl[5] = 0x0
addr[6] = 0x0, mask[6] = 0x0, ctrl[6] = 0x0
addr[7] = 0x12000803c, mask[7] = 0x0, ctrl[7] = 0x610
In arch_bp_generic_fields(), return -EINVAL when ctrl.len is
LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here.
In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH
and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return
-EINVAL. Here ctrl.type should be set based on note_type, and unnecessary
judgments can be removed.
2. The watchpoint argument was not set correctly due to unnecessary
offset and alignment_mask.
Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which
ensure the watchpont argument is set correctly.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: [email protected]
Signed-off-by: Hui Li <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
-mthin-add-sub
GAS <= 2.41 does not support generating R_LARCH_{32,64}_PCREL for
"label - ." and it generates R_LARCH_{ADD,SUB}{32,64} pairs instead.
Objtool cannot handle R_LARCH_{ADD,SUB}{32,64} pair in __jump_table
(static key implementation) and etc. so it will produce some warnings.
This is causing the kernel CI systems to complain everywhere.
For GAS we can check if -mthin-add-sub option is available to know if
R_LARCH_{32,64}_PCREL are supported.
For Clang, we require Clang >= 18 and Clang >= 17 already supports
R_LARCH_{32,64}_PCREL. But unfortunately Clang has some other issues,
so we disable objtool for Clang at present.
Note that __jump_table here is not generated by the compiler, so
-fno-jump-table is completely irrelevant for this issue.
Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support")
Closes: https://lore.kernel.org/loongarch/Zl5m1ZlVmGKitAof@yujie-X299/
Closes: https://lore.kernel.org/loongarch/[email protected]/
Closes: https://lore.kernel.org/loongarch/[email protected]/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=816029e06768
Link: https://github.com/llvm/llvm-project/commit/42cb3c6346fc
Signed-off-by: Xi Ruoyao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix for invalid register access
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZnPiE4ROqBowa1nS@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-06-19:
amdgpu:
- Fix display idle optimization race
- Fix GPUVM TLB flush locking scope
- IPS fix
- GFX 9.4.3 harvesting fix
- Runtime pm fix for shared buffers
- DCN 3.5.x fixes
- USB4 fix
- RISC-V clang fix
- Silence UBSAN warnings
- MES11 fix
- PSP 14.0.x fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.10-rc5:
- Fix conditions for joiner usage, it's not possible with eDP MSO
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.10, take #2
- Fix dangling references to a redistributor region if
the vgic was prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that
both parties can make forward progress.
|
|
Function kvm_reset_dirty_gfn may be called with parameters cur_slot /
cur_offset / mask are all zero, it does not represent real dirty page.
It is not necessary to clear dirty page in this condition. Also return
value of macro __fls() is undefined if mask is zero which is called in
funciton kvm_reset_dirty_gfn(). Here just return.
Signed-off-by: Bibo Mao <[email protected]>
Message-ID: <[email protected]>
[Move the conditional inside kvm_reset_dirty_gfn; suggested by
Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
If kvm_gmem_get_pfn() detects an hwpoisoned page, it returns -EHWPOISON
but it does not put back the reference that kvm_gmem_get_folio() had
grabbed. Add the forgotten folio_put().
Fixes: a7800aa80ea4 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: [email protected]
Reviewed-by: Liam Merwick <[email protected]>
Reviewed-by: Isaku Yamahata <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential infinite loop when doing block grou reclaim
- fix crash on emulated zoned device and NOCOW files
* tag 'for-6.10-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes
btrfs: retry block group reclaim without infinite loop
|
|
Some allocations done by KVM are temporary, they are created as result
of program actions, but can't exists for arbitrary long times.
They should have been GFP_TEMPORARY (rip!).
OTOH, kvm-nx-lpage-recovery and kvm-pit kernel threads exist for as long
as VM exists but their task_struct memory is not accounted.
This is story for another day.
Signed-off-by: Alexey Dobriyan <[email protected]>
Message-ID: <c0122f66-f428-417e-a360-b25fc0f154a0@p183>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Drop Wanpeng as a KVM PARAVIRT reviewer as his @tencent.com email is
bouncing, and according to lore[*], the last activity from his @gmail.com
address was almost two years ago.
[*] https://lore.kernel.org/all/CANRm+Cwj29M9HU3=JRUOaKDR+iDKgr0eNMWQi0iLkR5THON-bg@mail.gmail.com
Cc: Wanpeng Li <[email protected]>
Cc: Like Xu <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c29a ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: [email protected]
Cc: Adamos Ttofari <[email protected]>
Cc: Raghavendra Rao Ananta <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small HD-audio quirks and fixes (mostly Realtek codec and
Cirrus stuff).
Also a small MIDI 2.0 fix and a fix for missing module description
are included"
* tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add more codec ID to no shutup pins list
sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8
ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM
ALSA: hda: tas2781: Component should be unbound before deconstruction
ALSA: hda: cs35l41: Component should be unbound before deconstruction
ALSA: hda: cs35l56: Component should be unbound before deconstruction
ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
ALSA: hda/realtek: Limit mic boost on N14AP7
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11.
ALSA: seq: ump: Fix missing System Reset message handling
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
ALSA: hda: cs35l56: Fix lifecycle of codec pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd fix from Lee Jones:
- Fix AXP717 PMIC probe and by extension its consumers
* tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: axp20x: AXP717: Fix missing IRQ status registers range
|
|
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Signed-off-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Matthieu Baerts <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes for net
The first firmware interface update is needed by the second patch to
limit the number of TSO segments on the 5760X chips. The third patch
fixes the TX error path for PTP packets.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Firmware will now advertise a non-zero TSO max segments if the
device has a limit. 0 means no limit. The latest 5760X chip
(early revs) has a limit of 2047 that cannot be exceeded. If
exceeded, the chip will send out just a small number of segments.
Call netif_set_tso_max_segs() if the device has a limit.
Fixes: 2012a6abc876 ("bnxt_en: Add 5760X (P7) PCI IDs")
Reviewed-by: Ajit Khaparde <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The relevant change is the max_tso_segs value returned by firmware
in the HWRM_FUNC_QCAPS response. This value will be used in the next
patch to cap the TSO segments.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In io_import_fixed when advancing the iter within the first bvec, the
iter->nr_segs is set to bvec->bv_len. nr_segs should be the number of
bvecs, plus we don't need to adjust it here, so just remove it.
Fixes: b000ae0ec2d7 ("io_uring/rsrc: optimise single entry advance")
Signed-off-by: Chenliang Li <[email protected]>
Reviewed-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|