| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains Amir's work to fix a long-standing problem where an
unprivileged overlayfs mount can be used to avoid fanotify permission
events that were requested for an inode or superblock on the
underlying filesystem.
Some background about files opened in overlayfs. If a file is opened
in overlayfs @file->f_path will refer to a "fake" path. What this
means is that while @file->f_inode will refer to inode of the
underlying layer, @file->f_path refers to an overlayfs
{dentry,vfsmount} pair. The reasons for doing this are out of scope
here but it is the reason why the vfs has been providing the
open_with_fake_path() helper for overlayfs for very long time now. So
nothing new here.
This is for sure not very elegant and everyone including the overlayfs
maintainers agree. Improving this significantly would involve more
fragile and potentially rather invasive changes.
In various codepaths access to the path of the underlying filesystem
is needed for such hybrid file. The best example is fsnotify where
this becomes security relevant. Passing the overlayfs
@file->f_path->dentry will cause fsnotify to skip generating fsnotify
events registered on the underlying inode or superblock.
To fix this we extend the vfs provided open_with_fake_path() concept
for overlayfs to create a backing file container that holds the real
path and to expose a helper that can be used by relevant callers to
get access to the path of the underlying filesystem through the new
file_real_path() helper. This pattern is similar to what we do in
d_real() and d_real_inode().
The first beneficiary is fsnotify and fixes the security sensitive
problem mentioned above.
There's a couple of nice cleanups included as well.
Over time, the old open_with_fake_path() helper added specifically for
overlayfs a long time ago started to get used in other places such as
cachefiles. Even though cachefiles have nothing to do with hybrid
files.
The only reason cachefiles used that concept was that files opened
with open_with_fake_path() aren't charged against the caller's open
file limit by raising FMODE_NOACCOUNT. It's just mere coincidence that
both overlayfs and cachefiles need to ensure to not overcharge the
caller for their internal open calls.
So this work disentangles FMODE_NOACCOUNT use cases and backing file
use-cases by adding the FMODE_BACKING flag which indicates that the
file can be used to retrieve the backing file of another filesystem.
(Fyi, Jens will be sending you a really nice cleanup from Christoph
that gets rid of 3 FMODE_* flags otherwise this would be the last
fmode_t bit we'd be using.)
So now overlayfs becomes the sole user of the renamed
open_with_fake_path() helper which is now named backing_file_open().
For internal kernel users such as cachefiles that are only interested
in FMODE_NOACCOUNT but not in FMODE_BACKING we add a new
kernel_file_open() helper which opens a file without being charged
against the caller's open file limit. All new helpers are properly
documented and clearly annotated to mention their special uses.
We also rename vfs_tmpfile_open() to kernel_tmpfile_open() to clearly
distinguish it from vfs_tmpfile() and align it the other kernel_*()
internal helpers"
* tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: enable fsnotify events on underlying real files
fs: use backing_file container for internal files with "fake" f_path
fs: move kmem_cache_zalloc() into alloc_empty_file*() helpers
fs: use a helper for opening kernel internal files
fs: rename {vfs,kernel}_tmpfile_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rename locking updates from Christian Brauner:
"This contains the work from Jan to fix problems with cross-directory
renames originally reported in [1].
To quickly sum it up some filesystems (so far we know at least about
ext4, udf, f2fs, ocfs2, likely also reiserfs, gfs2 and others) need to
lock the directory when it is being renamed into another directory.
This is because we need to update the parent pointer in the directory
in that case and if that races with other operations on the directory,
in particular a conversion from one directory format into another, bad
things can happen.
So far we've done the locking in the filesystem code but recently
Darrick pointed out in [2] that the RENAME_EXCHANGE case was missing.
That one is particularly nasty because RENAME_EXCHANGE can arbitrarily
mix regular files and directories and proper lock ordering is not
achievable in the filesystems alone.
This patch set adds locking into vfs_rename() so that not only parent
directories but also moved inodes, regardless of whether they are
directories or not, are locked when calling into the filesystem.
This means establishing a locking order for unrelated directories. New
helpers are added for this purpose and our documentation is updated to
cover this in detail.
The locking is now actually easier to follow as we now always lock
source and target. We've always locked the target independent of
whether it was a directory or file and we've always locked source if
it was a regular file. The exact details for why this came about can
be found in [3] and [4]"
Link: https://lore.kernel.org/all/20230117123735.un7wbamlbdihninm@quack3 [1]
Link: https://lore.kernel.org/all/20230517045836.GA11594@frogsfrogsfrogs [2]
Link: https://lore.kernel.org/all/20230526-schrebergarten-vortag-9cd89694517e@brauner [3]
Link: https://lore.kernel.org/all/20230530-seenotrettung-allrad-44f4b00139d4@brauner [4]
* tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Restrict lock_two_nondirectories() to non-directory inodes
fs: Lock moved directories
fs: Establish locking order for unrelated directories
Revert "f2fs: fix potential corruption when moving a directory"
Revert "udf: Protect rename against modification of moved directory"
ext4: Remove ext4 locking of moved directory
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Pull thermal control updates for 6.5-rc1 from Daniel Lezcano:
"- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)"
* tag 'thermal-v6.5-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (38 commits)
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/stm32: Convert to platform remove callback returning void
net/mlx5: Update the driver with the recent thermal changes
thermal/drivers/armada: Add support for AP807 thermal data
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/qoriq: Support version 2.1
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: No need to program site adjustment register
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs updates from Christian Brauner:
"A pile of various smaller fixes for ntfs"
* tag 'v6.5/fs.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ntfs: do not dereference a null ctx on error
ntfs: Remove unneeded semicolon
ntfs: Correct spelling
ntfs: remove redundant initialization to pointer cb_sb_start
|
|
Pull auxdisplay update from Miguel Ojeda:
"A single cleanup for i2c drivers to switch them back to use
'.probe()'"
* tag 'auxdisplay-6.5' of https://github.com/ojeda/linux:
auxdisplay: Switch i2c drivers back to use .probe()
|
|
Pull rust updates from Miguel Ojeda:
"A fairly small one in terms of feature additions. Most of the changes
in terms of lines come from the upgrade to the new version of the
toolchain (which in turn is big due to the vendored 'alloc' crate).
Upgrade to Rust 1.68.2:
- This is the first such upgrade, and we will try to update it often
from now on, in order to remain close to the latest release, until
a minimum version (which is "in the future") can be established.
The upgrade brings the stabilization of 4 features we used (and 2
more that we used in our old 'rust' branch).
Commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2") contains the
details and rationale.
pin-init API:
- Several internal improvements and fixes to the pin-init API, e.g.
allowing to use 'Self' in a struct definition with '#[pin_data]'.
'error' module:
- New 'name()' method for the 'Error' type (with 'errname()'
integration), used to implement the 'Debug' trait for 'Error'.
- Add error codes from 'include/linux/errno.h' to the list of Rust
'Error' constants.
- Allow specifying error type on the 'Result' type (with the default
still being our usual 'Error' type).
'str' module:
- 'TryFrom' implementation for 'CStr', and new 'to_cstring()' method
based on it.
'sync' module:
- Implement 'AsRef' trait for 'Arc', allowing to use 'Arc' in code
that is generic over smart pointer types.
- Add 'ptr_eq' method to 'Arc' for easier, less error prone
comparison between two 'Arc' pointers.
- Reword the 'Send' safety comment for 'Arc', and avoid referencing
it from the 'Sync' one.
'task' module:
- Implement 'Send' marker for 'Task'.
'types' module:
- Implement 'Send' and 'Sync' markers for 'ARef<T>' when 'T' is
'AlwaysRefCounted', 'Send' and 'Sync'.
Other changes:
- Documentation improvements and '.gitattributes' change to start
using the Rust diff driver"
* tag 'rust-6.5' of https://github.com/Rust-for-Linux/linux:
rust: error: `impl Debug` for `Error` with `errname()` integration
rust: task: add `Send` marker to `Task`
rust: specify when `ARef` is thread safe
rust: sync: reword the `Arc` safety comment for `Sync`
rust: sync: reword the `Arc` safety comment for `Send`
rust: sync: implement `AsRef<T>` for `Arc<T>`
rust: sync: add `Arc::ptr_eq`
rust: error: add missing error codes
rust: str: add conversion from `CStr` to `CString`
rust: error: allow specifying error type on `Result`
rust: init: update macro expansion example in docs
rust: macros: replace Self with the concrete type in #[pin_data]
rust: macros: refactor generics parsing of `#[pin_data]` into its own function
rust: macros: fix usage of `#[allow]` in `quote!`
docs: rust: point directly to the standalone installers
.gitattributes: set diff driver for Rust source code files
rust: upgrade to Rust 1.68.2
rust: arc: fix intra-doc link in `Arc<T>::init`
rust: alloc: clarify what is the upstream version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Use correct type for size of memory allocated for ELF core header on
kernel crash.
- Fix insecure W+X mapping warning when KASAN shadow memory range is
not aligned on page boundary.
- Avoid allocation of short by one page KASAN shadow memory when the
original memory range is less than (PAGE_SIZE << 3).
- Fix virtual vs physical address confusion in physical memory
enumerator. It is not a real issue, since virtual and physical
addresses are currently the same.
- Set CONFIG_NET_TC_SKB_EXT=y in s390 config files as it is required
for offloading TC as well as bridges on switchdev capable ConnectX
devices.
* tag 's390-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/defconfigs: set CONFIG_NET_TC_SKB_EXT=y
s390/boot: fix physmem_info virtual vs physical address confusion
s390/kasan: avoid short by one page shadow memory
s390/kasan: fix insecure W+X mapping warning
s390/crash: use the correct type for memory allocation
|
|
"linux,no-autorepeat" is missing a type, add it.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
property name
"linux-keycodes" is the wrong property name and is unused. It should be
"linux,keycodes" instead.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 updates from Dinh Nguyen:
- Convert pgtable constructor/destructors to ptdesc
- Replace strlcpy with strscpy
* tag 'nios2_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Replace all non-returning strlcpy with strscpy
nios2: Convert __pte_free_tlb() to use ptdescs
|
|
|
|
Merge power capping updates for 6.5-rc1:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
* powercap:
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
powercap: intel_rapl: Introduce RAPL TPMI interface driver
powercap: intel_rapl: Introduce core support for TPMI interface
powercap: intel_rapl: Introduce RAPL I/F type
powercap: intel_rapl: Make cpu optional for rapl_package
powercap: intel_rapl: Remove redundant cpu parameter
powercap: intel_rapl: Add support for lock bit per Power Limit
powercap: intel_rapl: Cleanup Power Limits support
powercap: intel_rapl: Use bitmap for Power Limits
powercap: intel_rapl: Change primitive order
powercap: intel_rapl: Use index to initialize primitive information
powercap: intel_rapl: Support per domain energy/power/time unit
powercap: intel_rapl: Support per Interface primitive information
powercap: intel_rapl: Support per Interface rapl_defaults
powercap: intel_rapl: Allow probing without CPUID match
powercap: intel_rapl: Remove unused field in struct rapl_if_priv
|
|
'clk-ti' and 'clk-kasprintf' into clk-next
- Handle allocation failures from kasprintf() and friends
* clk-imx:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
* clk-microchip:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
* clk-cleanup:
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: mvebu: Use of_address_to_resource()
clk: tegra: tegra124-emc: Fix potential memory leak
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
clk: sifive: Use devm_platform_ioremap_resource()
* clk-bindings:
dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
* clk-ti:
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
* clk-kasprintf:
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
|
|
'clk-samsung' and 'clk-amlogic' into clk-next
- Make clk_ops::determine_rate mandatory for muxes
* clk-renesas:
clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic()
clk: renesas: mstp: Convert to readl_poll_timeout_atomic()
clk: renesas: cpg-mssr: Convert to readl_poll_timeout_atomic()
iopoll: Do not use timekeeping in read_poll_timeout_atomic()
iopoll: Call cpu_relax() in busy loops
clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register write
clk: renesas: r8a779a0: Add PWM clock
* clk-determine-rate: (71 commits)
clk: sprd: composite: Simplify determine_rate implementation
ASoC: tlv320aic32x4: pll: Remove impossible condition in clk_aic32x4_pll_determine_rate()
clk: Fix best_parent_rate after moving code into a separate function
clk: Forbid to register a mux without determine_rate
ASoC: tlv320aic32x4: div: Switch to determine_rate
ASoC: tlv320aic32x4: pll: Switch to determine_rate
clk: tegra: super: Switch to determine_rate
clk: tegra: periph: Switch to determine_rate
clk: stm32: composite: Switch to determine_rate
clk: st: flexgen: Switch to determine_rate
clk: sprd: composite: Switch to determine_rate
clk: ingenic: tcu: Switch to determine_rate
clk: ingenic: cgu: Switch to determine_rate
clk: imx: scu: Switch to determine_rate
clk: da8xx: clk48: Switch to determine_rate
clk: si5351: clkout: Switch to determine_rate
clk: si5351: msynth: Switch to determine_rate
clk: si5351: pll: Switch to determine_rate
clk: si5341: Switch to determine_rate
clk: cdce706: clkout: Switch to determine_rate
...
* clk-allwinner:
clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux
* clk-samsung:
clk: samsung: add CONFIG_OF dependency
clk: samsung: Re-add support for Exynos4212 CPU clock
clk: samsung: Add Exynos4212 compatible to CLKOUT driver
dt-bindings: clock: samsung,exynos: add Exynos4212 clock compatible
* clk-amlogic:
MAINTAINERS: repair pattern in ARM/Amlogic Meson SoC CLOCK FRAMEWORK
clk: meson: pll: remove unneeded semicolon
clk: meson: a1: Staticize rtc clk
clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
clk: meson: a1: add Amlogic A1 PLL clock controller driver
clk: meson: introduce new pll power-on sequence for A1 SoC family
clk: meson: make pll rst bit as optional
dt-bindings: clock: meson: add A1 Peripherals clock controller bindings
dt-bindings: clock: meson: add A1 PLL clock controller bindings
|
|
'clk-vc5' into clk-next
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
* clk-platform:
clk: mediatek: Convert all remaining drivers to platform_driver's .remove_new()
clk: mediatek: Make mtk_clk_pdev_remove() return void
clk: mediatek: Make mtk_clk_simple_remove() return void
* clk-i2c:
clk: si521xx: Switch i2c driver back to use .probe()
clk: Switch i2c drivers back to use .probe()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: mediatek: fix of_iomap memory leak
clk: mediatek: reset: add infra_ao reset support for MT8188
dt-bindings: reset: mt8188: add thermal reset control bit
clk: mediatek: Remove CLK_SET_PARENT from all MSDC core clocks
clk: mediatek: mux: Stop forcing CLK_SET_RATE_PARENT flag
clk: mediatek: Enable all MT8192 clocks by default
* clk-i2cid:
clk: rs9: Fix .driver_data content in i2c_device_id
clk: vc7: Fix .driver_data content in i2c_device_id
clk: vc5: Fix .driver_data content in i2c_device_id
* clk-vc5:
clk: vc7: Use device_get_match_data() instead of of_device_get_match_data()
clk: vc5: Use device_get_match_data() instead of of_device_get_match_data()
|
|
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
|
|
Merge cpufreq and cpuidle updates for 6.5-rc1:
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
* pm-cpufreq:
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
cpufreq: Fail driver register if it has adjust_perf without fast_switch
* pm-cpuidle:
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
intel_idle: Add support for using intel_idle in a VM guest using just hlt
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
|
|
Merge ACPI APEI changes, an ACPI PAD driver update and an ACPI FFH
handling cleanup related to ARM64 for 6.5-rc1:
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang).
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin).
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc).
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla).
* acpi-apei:
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: APEI: mark bert_disable as __initdata
ACPI: APEI: GHES: Remove unused ghes_estatus_pool_size_request()
* acpi-pad:
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
* acpi-misc:
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
|
|
Merge ACPI thermal driver cleanups and ACPI button drivers rework for
6.5-rc1:
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
* acpi-button:
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
|
|
Set element addition error path decrements reference counter on chains
twice: once on element release and again via nft_data_release().
Then, d6b478666ffa ("netfilter: nf_tables: fix underflow in object
reference counter") incorrectly fixed this by removing the stateful
object reference count decrement.
Restore the stateful object decrement as in b91d90368837 ("netfilter:
nf_tables: fix leaking object reference count") and let
nft_data_release() decrement the chain reference counter, so this is
done only once.
Fixes: d6b478666ffa ("netfilter: nf_tables: fix underflow in object reference counter")
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Otherwise a dangling reference to a rule object that is gone remains
in the set binding list.
Fixes: 26b5a5712eb8 ("netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
value.
ct_sip_parse_numerical_param() returns only 0 or 1 now.
But process_register_request() and process_register_response() imply
checking for a negative value if parsing of a numerical header parameter
failed.
The invocation in nf_nat_sip() looks correct:
if (ct_sip_parse_numerical_param(...) > 0 &&
...) { ... }
Make the return value of the function ct_sip_parse_numerical_param()
a tristate to fix all the cases
a) return 1 if value is found; *val is set
b) return 0 if value is not found; *val is unchanged
c) return -1 on error; *val is undefined
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 0f32a40fc91a ("[NETFILTER]: nf_conntrack_sip: create signalling expectations")
Signed-off-by: Ilia.Gavrilov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Merge x86-related ACPI changes, backlight-related ACPI changes, an Intel
SoC (LPSS) ACPI driver update and a missing prototype warning fix
related to ACPI NFIT for 6.5-rc1:
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
* acpi-x86:
ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l
ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A
ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: video: Add backlight=native DMI quirk for Lenovo ThinkPad X131e (3371 AMD version)
ACPI: video: Add backlight=native DMI quirk for Apple iMac11,3
* acpi-soc:
ACPI: LPSS: Add pwm_lookup_table entry for second PWM on CHT/BSW devices
* acpi-tables:
ACPI: NFIT: Add declaration in a local header
|
|
Merge ACPI device enumeration changes, ACPI power management update,
ACPI resources management updates and an EC driver update for 6.5-rc1:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
* acpi-scan:
ACPI: scan: Reduce overhead related to devices with dependencies
* acpi-pm:
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: PM: s2idle: fix section mismatch warning
* acpi-resource:
ACPI: resource: Remove "Zen" specific match and quirks
* acpi-ec:
ACPI: EC: Clear GPE on interrupt handling only
|
|
Code which interacts with timestamps needs to use the ktime_t type
returned by functions like ktime_get. The int type does not offer
enough space to store these values, and attempting to use it is a
recipe for problems. In this particular case, overflows would occur
when calculating/storing timestamps leading to incorrect values being
reported to userspace. In some cases these bad timestamps cause input
handling in userspace to appear hung.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/901
Fixes: 17d793f3ed53 ("HID: wacom: insert timestamp to packed Bluetooth (BT) events")
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
|
|
Pull the 6.5-devel branch for upstreaming.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
On HP EliteBook 835/845/845W G10, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
Signed-off-by: Andy Chi <[email protected]>
Cc: <[email protected]>
Fixes: 3e10f6ca76c4 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
kernel-doc does not support DECLARE_PER_CPU(), so don't mark it with
kernel-doc notation.
One comment block is not kernel-doc notation, so just use
"/*" to begin the comment.
Quietens these warnings:
netfilter.h:493: warning: Function parameter or member 'bool' not described in 'DECLARE_PER_CPU'
netfilter.h:493: warning: Function parameter or member 'nf_skb_duplicated' not described in 'DECLARE_PER_CPU'
netfilter.h:493: warning: expecting prototype for nf_skb_duplicated(). Prototype was for DECLARE_PER_CPU() instead
netfilter.h:496: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Contains bitmask of ctnetlink event subscribers, if any.
Fixes: e7c8899f3e6f ("netfilter: move tee_active to core")
Fixes: fdf6491193e4 ("netfilter: ctnetlink: make event listener tracking global")
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
basic one
Eric Dumazet says:
nf_conntrack_dccp_packet() has an unique:
dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh);
And nothing more is 'pulled' from the packet, depending on the content.
dh->dccph_doff, and/or dh->dccph_x ...)
So dccp_ack_seq() is happily reading stuff past the _dh buffer.
BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0
Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371
[..]
Fix this by increasing the stack buffer to also include room for
the extra sequence numbers and all the known dccp packet type headers,
then pull again after the initial validation of the basic header.
While at it, mark packets invalid that lack 48bit sequence bit but
where RFC says the type MUST use them.
Compile tested only.
v2: first skb_header_pointer() now needs to adjust the size to
only pull the generic header. (Eric)
Heads-up: I intend to remove dccp conntrack support later this year.
Fixes: 2bc780499aa3 ("[NETFILTER]: nf_conntrack: add DCCP protocol support")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The `shift` variable which indicates the offset in the string at which
to start matching the pattern is initialized to `bm->patlen - 1`, but it
is not reset when a new block is retrieved. This means the implemen-
tation may start looking at later and later positions in each successive
block and miss occurrences of the pattern at the beginning. E.g.,
consider a HTTP packet held in a non-linear skb, where the HTTP request
line occurs in the second block:
[... 52 bytes of packet headers ...]
GET /bmtest HTTP/1.1\r\nHost: www.example.com\r\n\r\n
and the pattern is "GET /bmtest".
Once the first block comprising the packet headers has been examined,
`shift` will be pointing to somewhere near the end of the block, and so
when the second block is examined the request line at the beginning will
be missed.
Reinitialize the variable for each new block.
Fixes: 8082e4ed0a61 ("[LIB]: Boyer-Moore extension for textsearch infrastructure strike #2")
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1390
Signed-off-by: Jeremy Sowden <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Use the dev_err_probe function instead of dev_err in the probe function
so that the printed message includes the return value and also handles
-EPROBE_DEFER nicely.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Register thermal zones as hwmon sensors to let userspace read
temperatures using standard hwmon interface.
Signed-off-by: Chen-Yu Tsai <[email protected]>
[Yangtao: only keep devm_thermal_add_hwmon_sysfs]
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Acked-by: Keerthy <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
imx_sc_thermal_probe()
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.
Signed-off-by: Yangtao Li <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Ensure that all error handling branches print error information. In this
way, when this function fails, the upper-layer functions can directly
return an error code without missing debugging information. Otherwise,
the error message will be printed redundantly or missing.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
st_thermal_unregister() always returned zero, so convert it to return void
without any loss and then just drop the return from st_mmap_remove().
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The thermal framework is migrating to the generic trip points. The set
of changes also implies a self-encapsulation of the thermal zone
device structure where the internals are no longer directly accessible
but with accessors.
Use the new API instead, so the next changes can be pushed in the
thermal framework without this driver failing to compile.
No functional changes intended.
Cc: Sandipan Patra <[email protected]>
Cc: Gal Pressman <[email protected]>
Cc: Saeed Mahameed <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for the AP807 die thermal data. This is the same as AP806,
except for the coefficients.
ap807 values taken from TSENSE_ADC_16FFC spec, which says:
T(in Celsius) = T(code)*TSENE_GAIN+TSENE_OFFSET
where in default:
TSENE_OFFSET = 128.9
TSENE_GAIN = 0.394
Signed-off-by: Alex Leibovich <[email protected]>
Tested-by: sa_ip-sw-jenkins <[email protected]>
Reviewed-by: Stefan Chulski <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add marvell,armada-ap807-thermal compatible for the AP807 die.
Signed-off-by: Alex Leibovich <[email protected]>
Reviewed-by: Stefan Chulski <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|