aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-20dt-bindings: mediatek: mt6359: add codec documentJiaxin Yu1-0/+61
This patch adds MediaTek MT6359 codec document. Signed-off-by: Jiaxin Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-08-20ASoC: mediatek: mt6359: add codec driverJiaxin Yu4-0/+5403
Add the mt6359 codec driver. Signed-off-by: Jiaxin Yu <[email protected]> Reviewed-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-08-20net/smc: Prevent kernel-infoleak in __smc_diag_dump()Peilin Ye1-7/+9
__smc_diag_dump() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 4-byte hole near the beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo` with memset(). Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-20sfc: fix build warnings on 32-bitEdward Cree1-4/+4
Truncation of DMA_BIT_MASK to 32-bit dma_addr_t is semantically safe, but the compiler was warning because it was happening implicitly. Insert explicit casts to suppress the warnings. Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Edward Cree <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: David S. Miller <[email protected]>
2020-08-20net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"Kaige Li1-2/+2
There are a couple of spelling mistakes in comment text. Fix these. Signed-off-by: Kaige Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-20riscv: Add SiFive drivers to rv32_defconfigBin Meng1-0/+5
This adds SiFive drivers to rv32_defconfig, to keep in sync with the 64-bit config. This is useful when testing 32-bit kernel with QEMU 'sifive_u' 32-bit machine. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-08-20dt-bindings: timer: Add CLINT bindingsAnup Patel1-0/+60
We add DT bindings documentation for CLINT device. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Tested-by: Emil Renner Berhing <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-08-20RISC-V: Remove CLINT related code from timer and archAnup Patel12-126/+16
Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel <[email protected]> Tested-by: Emil Renner Berhing <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-08-20clocksource/drivers: Add CLINT timer driverAnup Patel4-0/+237
We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e. RISC-V NoMMU kernel). The CLINT MMIO device provides three things: 1. 64bit free running counter register 2. 64bit per-CPU time compare registers 3. 32bit per-CPU inter-processor interrupt registers Unlike other timer devices, CLINT provides IPI registers along with timer registers. To use CLINT IPI registers, the CLINT timer driver provides IPI related callbacks to arch/riscv. Signed-off-by: Anup Patel <[email protected]> Tested-by: Emil Renner Berhing <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-08-20RISC-V: Add mechanism to provide custom IPI operationsAnup Patel6-48/+79
We add mechanism to set custom IPI operations so that CLINT driver from drivers directory can provide custom IPI operations. Signed-off-by: Anup Patel <[email protected]> Tested-by: Emil Renner Berhing <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-08-20Merge tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds5-78/+92
Pull dma-mapping fixes from Christoph Hellwig: "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne, me)" * tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: Only allocate from CMA when in same memory zone dma-pool: fix coherent pool allocations for IOMMU mappings
2020-08-20afs: Fix key ref leak in afs_put_operation()David Howells1-0/+1
The afs_put_operation() function needs to put the reference to the key that's authenticating the operation. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Dave Botsch <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-08-20Merge branch 'opp/fixes' of ↵Rafael J. Wysocki1-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for 5.9-rc2 from Viresh Kumar: "This contains the following fixes for 5.9: - Fix re-enabling of resources (Rajendra Nayak). - Put OPP table references (Stephen Boyd)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Enable resources again if they were disabled earlier opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails opp: Put opp table in dev_pm_opp_set_rate() for empty tables
2020-08-20libbpf: Fix map index used in error messageToke Høiland-Jørgensen1-1/+1
The error message emitted by bpf_object__init_user_btf_maps() was using the wrong section ID. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20powerpc/pseries: Do not initiate shutdown when system is running on UPSVasant Hegde1-1/+0
As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: [email protected] # v4.0+ Signed-off-by: Vasant Hegde <[email protected]> [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-20io_uring: kill extra iovec=NULL in import_iovec()Pavel Begunkov1-3/+1
If io_import_iovec() returns an error, return iovec is undefined and must not be used, so don't set it to NULL when failing. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-20io_uring: comment on kfree(iovec) checksPavel Begunkov1-0/+2
kfree() handles NULL pointers well, but io_{read,write}() checks it because of performance reasons. Leave a comment there for those who are tempted to patch it. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-20io_uring: fix racy req->flags modificationPavel Begunkov1-44/+17
Setting and clearing REQ_F_OVERFLOW in io_uring_cancel_files() and io_cqring_overflow_flush() are racy, because they might be called asynchronously. REQ_F_OVERFLOW flag in only needed for files cancellation, so if it can be guaranteed that requests _currently_ marked inflight can't be overflown, the problem will be solved with removing the flag altogether. That's how the patch works, it removes inflight status of a request in io_cqring_fill_event() whenever it should be thrown into CQ-overflow list. That's Ok to do, because no opcode specific handling can be done after io_cqring_fill_event(), the same assumption as with "struct io_completion" patches. And it already have a good place for such cleanups, which is io_clean_op(). A nice side effect of this is removing this inflight check from the hot path. note on synchronisation: now __io_cqring_fill_event() may be taking two spinlocks simultaneously, completion_lock and inflight_lock. It's fine, because we never do that in reverse order, and CQ-overflow of inflight requests shouldn't happen often. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-20Revert "RDMA/hns: Reserve one sge in order to avoid local length error"Weihang Li5-14/+8
This patch caused some issues on SEND operation, and it should be reverted to make the drivers work correctly. There will be a better solution that has been tested carefully to solve the original problem. This reverts commit 711195e57d341e58133d92cf8aaab1db24e4768d. Fixes: 711195e57d34 ("RDMA/hns: Reserve one sge in order to avoid local length error") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Weihang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-08-20RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE requestKaike Wan1-0/+1
The following message occurs when running an AI application with TID RDMA enabled: hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084 hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084 The issue happens when TID RDMA WRITE request is followed by an IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on the responder side. As a result, no ACK packet for the latter could be sent because the TID RDMA WRITE request is still being processed on the responder side. When the TID RDMA WRITE request is eventually completed, the requester will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged. If the next request is another TID RDMA WRITE request, no TID RDMA WRITE DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM request is not completed yet. Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be ignored on the responder side because the responder thinks it has already been completed. Eventually the retry will be exhausted and the qp will be put into error state on the requester side. On the responder side, the TID resource timer will eventually expire because no TID RDMA WRITE DATA packets will be received for the second TID RDMA WRITE request. There is also risk of a write-after-write memory corruption due to the issue. Fix by adding a requester side interlock to prevent any potential data corruption and TID RDMA protocol error. Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests") Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> # 5.4.x+ Reviewed-by: Mike Marciniszyn <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-08-20RDMA/bnxt_re: Do not add user qps to flushlistSelvin Xavier1-1/+2
Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-08-20RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"Colin Ian King1-1/+1
There is a spelling mistake in a pr_warn message. Fix it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-08-20powerpc/perf: Fix soft lockups due to missed interrupt accountingAthira Rajeev1-0/+4
Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt(). Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check. But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup. Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information. Reported-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Tested-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-20Documentation: efi: remove description of efi=old_mapArd Biesheuvel1-4/+1
The old EFI runtime region mapping logic that was kept around for some time has finally been removed entirely, along with the SGI UV1 support code that was its last remaining user. So remove any mention of the efi=old_map command line parameter from the docs. Cc: Jonathan Corbet <[email protected]> Cc: [email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi/x86: Move 32-bit code into efi_32.cArd Biesheuvel3-86/+37
Now that the old memmap code has been removed, some code that was left behind in arch/x86/platform/efi/efi.c is only used for 32-bit builds, which means it can live in efi_32.c as well. So move it over. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi/libstub: Handle unterminated cmdlineArvind Sankar1-2/+4
Make the command line parsing more robust, by handling the case it is not NUL-terminated. Use strnlen instead of strlen, and make sure that the temporary copy is NUL-terminated before parsing. Cc: <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi/libstub: Handle NULL cmdlineArvind Sankar1-1/+5
Treat a NULL cmdline the same as empty. Although this is unlikely to happen in practice, the x86 kernel entry does check for NULL cmdline and handles it, so do it here as well. Cc: <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi/libstub: Stop parsing arguments at "--"Arvind Sankar1-0/+2
Arguments after "--" are arguments for init, not for the kernel. Cc: <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi: add missed destroy_workqueue when efisubsys_init failsLi Heng1-0/+2
destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails. Cc: <[email protected]> Reported-by: Hulk Robot <[email protected]> Signed-off-by: Li Heng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20efi/x86: Mark kernel rodata non-executable for mixed modeArvind Sankar1-0/+2
When remapping the kernel rodata section RO in the EFI pagetables, the protection flags that were used for the text section are being reused, but the rodata section should not be marked executable. Cc: <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-08-20opp: Enable resources again if they were disabled earlierRajendra Nayak1-4/+7
dev_pm_opp_set_rate() can now be called with freq = 0 in order to either drop performance or bandwidth votes or to disable regulators on platforms which support them. In such cases, a subsequent call to dev_pm_opp_set_rate() with the same frequency ends up returning early because 'old_freq == freq' Instead make it fall through and put back the dropped performance and bandwidth votes and/or enable back the regulators. Cc: v5.3+ <[email protected]> # v5.3+ Fixes: cd7ea582866f ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes") Reported-by: Sajida Bhanu <[email protected]> Reviewed-by: Sibi Sankar <[email protected]> Reported-by: Matthias Kaehlcke <[email protected]> Tested-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Rajendra Nayak <[email protected]> [ Viresh: Don't skip clk_set_rate() and massaged changelog ] Signed-off-by: Viresh Kumar <[email protected]>
2020-08-20Fix build error when CONFIG_ACPI is not set/enabled:Randy Dunlap1-0/+1
../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-20efi: avoid error message when booting under XenJuergen Gross1-1/+1
efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set. Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") Signed-off-by: Juergen Gross <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2020-08-19Merge tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfioLinus Torvalds3-29/+164
Pull VFIO fixes from Alex Williamson: - Fix lockdep issue reported for recursive read-lock (Alex Williamson) - Fix missing unwind in type1 replay function (Alex Williamson) * tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfio: vfio/type1: Add proper error unwind for vfio_iommu_replay() vfio-pci: Avoid recursive read-lock usage
2020-08-19Revert "drm/amdgpu: disable gfxoff for navy_flounder"Jiansong Chen1-3/+0
This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3. Newly released sdma fw (51.52) provides a fix for the issue. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-20powerpc/powernv/pci: Fix possible crash when releasing DMA resourcesFrederic Barrat1-1/+1
Fix a typo introduced during recent code cleanup, which could lead to silently not freeing resources or an oops message (on PCI hotplug or CAPI reset). Only impacts ioda2, the code path for ioda1 is correct. Fixes: 01e12629af4e ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state") Signed-off-by: Frederic Barrat <[email protected]> Reviewed-by: Oliver O'Halloran <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-19net: gemini: Fix missing free_netdev() in error path of ↵Wang Hai1-3/+1
gemini_ethernet_port_probe() Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way, when probe fails, netdev can be freed automatically. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19net: atlantic: Use readx_poll_timeout() for large timeoutSebastian Andrzej Siewior1-2/+2
Commit 8dcf2ad39fdb2 ("net: atlantic: add hwmon getter for MAC temperature") implemented a read callback with an udelay(10000U). This fails to compile on ARM because the delay is >1ms. I doubt that it is needed to spin for 10ms even if possible on x86. >From looking at the code, the context appears to be preemptible so using usleep() should work and avoid busy spinning. Use readx_poll_timeout() in the poll loop. Fixes: 8dcf2ad39fdb2 ("net: atlantic: add hwmon getter for MAC temperature") Cc: Mark Starovoytov <[email protected]> Cc: Igor Russkikh <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19ptp: ptp_clockmatrix: use i2c_master_send for i2c writeMin Li2-13/+45
The old code for i2c write would break on some controllers, which fails at handling Repeated Start Condition. So we will just use i2c_master_send to handle write in one transanction. Changes since v1: - Remove indentation change Signed-off-by: Min Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19netlink: fix state reallocation in policy exportJohannes Berg1-0/+3
Evidently, when I did this previously, we didn't have more than 10 policies and didn't run into the reallocation path, because it's missing a memset() for the unused policies. Fix that. Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19Merge branch 'Bug-fixes-for-ENA-ethernet-driver'David S. Miller1-17/+18
Shay Agroskin says: ==================== Bug fixes for ENA ethernet driver This series adds the following: - Fix undesired call to ena_restore after returning from suspend - Fix condition inside a WARN_ON - Fix overriding previous value when updating missed_tx statistic v1->v2: - fix bug when calling reset routine after device resources are freed (Jakub) v2->v3: - fix wrong hash in 'Fixes' tag ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-19net: ena: Make missed_tx stat incrementalShay Agroskin1-1/+4
Most statistics in ena driver are incremented, meaning that a stat's value is a sum of all increases done to it since driver/queue initialization. This patch makes all statistics this way, effectively making missed_tx statistic incremental. Also added a comment regarding rx_drops and tx_drops to make it clearer how these counters are calculated. Fixes: 11095fdb712b ("net: ena: add statistics for missed tx packets") Signed-off-by: Shay Agroskin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19net: ena: Change WARN_ON expression in ena_del_napi_in_range()Shay Agroskin1-7/+4
The ena_del_napi_in_range() function unregisters the napi handler for rings in a given range. This function had the following WARN_ON macro: WARN_ON(ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring); This macro prints the call stack if the expression inside of it is true [1], but the expression inside of it is the wanted situation. The expression checks whether the ring has an XDP queue and its index corresponds to a XDP one. This patch changes the expression to !ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring which indicates an unwanted situation. Also, change the structure of the function. The napi handler is unregistered for all rings, and so there's no need to check whether the index is an XDP index or not. By removing this check the code becomes much more readable. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19net: ena: Prevent reset after device destructionShay Agroskin1-9/+10
The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing). When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly. This creates the following bug: The driver is suspended and the ena_suspend() function is called -> This function calls ena_destroy_device() to free the net device resources -> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again. If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made. By changing the reset routine we allow it to read the device's state accurately. This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock. The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set. The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Shay Agroskin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-19of: address: Work around missing device_type property in pcie nodesMarc Zyngier1-1/+15
Recent changes to the DT PCI bus parsing made it mandatory for device tree nodes describing a PCI controller to have the 'device_type = "pci"' property for the node to be matched. Although this follows the letter of the specification, it breaks existing device-trees that have been working fine for years. Rockchip rk3399-based systems are a prime example of such collateral damage, and have stopped discovering their PCI bus. In order to paper over it, let's add a workaround to the code matching the device type, and accept as PCI any node that is named "pcie", A warning will hopefully nudge the user into updating their DT to a fixed version if they can, but the incentive is obviously pretty small. Fixes: 2f96593ecc37 ("of_address: Add bus type match for pci ranges parser") Suggested-by: Rob Herring <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2020-08-19dt: writing-schema: Miscellaneous grammar fixesGeert Uytterhoeven1-2/+2
- Add missing verb, - Fix accidental plural. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-19Merge tag 'samsung-platdrv-boards' into asoc-5.10Mark Brown9-161/+126
ASoC: Convert Samsung drivers to platform drivers
2020-08-19ASoC: sun8i-codec: Hook up component probe functionSamuel Holland1-0/+1
Due to a mistake made while reordering patches, commit 90cac932976e ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") added the sun8i_codec_component_probe function without referencing it from the component definition. Add the reference so the probe function gets called as expected. Fixes: 90cac932976e ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-08-19ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IISArnd Bergmann3-5/+3
The constant requires indirectly including a machine header file, but it's not actually used any more since commit 87b132bc0315 ("ASoC: samsung: s3c24{xx,12}-i2s: port to use generic dmaengine API"), so remove it completely. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-08-19ASoC: samsung: rx1950: turn into platform driverArnd Bergmann2-49/+39
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.