aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-08-25Merge tag 'usb-serial-4.8-rc4' of ↵Greg Kroah-Hartman3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc4 Here are a couple of fixes for non-atomic allocations in write paths, and some new option device ids. Signed-off-by: Johan Hovold <[email protected]>
2016-08-25Merge tag 'fixes-for-v4.8-rc3' of ↵Greg Kroah-Hartman12-20/+57
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.8-rc3 Few fixes on dwc3 again, the most important being a fix for pm_runtime to make it work with current intel platforms. Other than that, there's a signedness bug fix in fsl udc and some other minor fixes.
2016-08-25usb: dwc3: gadget: always decrement by 1Felipe Balbi1-4/+1
We need to decrement in both cases (enq > deq and enq < deq) Signed-off-by: Felipe Balbi <[email protected]>
2016-08-25usb: dwc3: debug: fix ep name on trace outputFelipe Balbi1-1/+1
There was a typo when generating endpoint name which would be very confusing when debugging. Fix it. Signed-off-by: Felipe Balbi <[email protected]>
2016-08-25usb: gadget: udc: core: don't starve DMA resourcesFelipe Balbi1-1/+1
Always unmap all SG entries as required by DMA API Fixes: a698908d3b3b ("usb: gadget: add generic map/unmap request utilities") Cc: <[email protected]> # v3.4+ Signed-off-by: Felipe Balbi <[email protected]>
2016-08-24USB: serial: option: add WeTelecom 0x6802 and 0x6803 productsAleksandr Makarov1-0/+4
These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by: Aleksandr Makarov <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2016-08-23USB: avoid left shift by -1Alan Stern1-5/+11
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <[email protected]> Reported-by: Vittorio Zecca <[email protected]> Tested-by: Vittorio Zecca <[email protected]> Suggested-by: Bjørn Mork <[email protected]> CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-08-23USB: fix typo in wMaxPacketSize validationAlan Stern1-1/+1
The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern <[email protected]> Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-08-22usb: gadget: Add the gserial port checking in gs_start_tx()Baolin Wang1-1/+6
When usb gadget is set gadget serial function, it will be crash in below situation. It will clean the 'port->port_usb' pointer in gserial_disconnect() function when usb link is inactive, but it will release lock for disabling the endpoints in this function. Druing the lock release period, it maybe complete one request to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb' pointer had been set NULL, thus it will be crash in gs_start_tx() function. This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function to avoid this situation. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: dwc3: gadget: don't rely on jiffies while holding spinlockNicolas Saenz Julienne1-3/+3
__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on jiffies in order to timeout while polling the USB core for a link state update. In the case the wakeup failed, the timeout will never happen and will also cause the cpu to stall until rcu_preempt kicks in. This switches to a "decrement variable and wait" timeout scheme. Signed-off-by: Nicolas Saenz Julienne <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()Dan Carpenter1-5/+2
We can't assign -EINVAL to a u16. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: gadget: function: f_rndis: socket buffer may be NULLPeter Chen1-0/+3
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: gadget: function: f_eem: socket buffer may be NULLPeter Chen1-3/+7
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()Wei Yongjun1-1/+1
In case of error, the function usb_get_phy() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: <[email protected]> # v4.3+ Acked-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: dwc2: Add reset control to dwc2Dinh Nguyen2-0/+23
Allow for platforms that have a reset controller driver in place to bring the USB IP out of reset. Signed-off-by: Dinh Nguyen <[email protected]> Acked-by: John Youn <[email protected]> Tested-by: Stefan Wahren <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: dwc3: core: allow device to runtime_suspend several timesFelipe Balbi1-0/+1
After going through runtime_suspend/runtime_resume cycle once we would be left with an unbalanced pm_runtime_get() call. Fix that by making sure that we try to suspend right after resuming so things are balanced and device can runtime_suspend again. Signed-off-by: Felipe Balbi <[email protected]>
2016-08-22usb: dwc3: pci: runtime_resume child deviceFelipe Balbi1-1/+8
During runtime_resume of dwc3-pci.c, we need to runtime suspend our child device (which is dwc3 proper) otherwise nothing will happen. Signed-off-by: Felipe Balbi <[email protected]>
2016-08-21Linux 4.8-rc3Linus Torvalds1-1/+1
2016-08-21Merge branch 'parisc-4.8-2' of ↵Linus Torvalds3-22/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull two parisc fixes from Helge Deller: "The first patch ensures that the high-res cr16 clocksource (which was added in kernel 4.7) gets choosen as default clocksource for parisc. The second patch moves the #define of EREFUSED down inside errno.h and thus unbreaks building the gccgo compiler" * 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix order of EREFUSED define in errno.h parisc: Fix automatic selection of cr16 clocksource
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck4-0/+1136
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <[email protected]> Acked-by: Borislav Petkov <[email protected]> Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-08-20USB: serial: option: add WeTelecom WM-D200Aleksandr Makarov1-0/+5
Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2016-08-20parisc: Fix order of EREFUSED define in errno.hHelge Deller1-2/+2
When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2016-08-20parisc: Fix automatic selection of cr16 clocksourceHelge Deller2-20/+0
Commit 54b66800907 (parisc: Add native high-resolution sched_clock() implementation) added support to use the CPU-internal cr16 counters as reliable clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK. Sadly the commit missed to remove the hack which prevented cr16 to become the default clocksource even on SMP systems. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # 4.7+
2016-08-19Make the hardened user-copy code depend on having a hardened allocatorLinus Torvalds1-0/+1
The kernel test robot reported a usercopy failure in the new hardened sanity checks, due to a page-crossing copy of the FPU state into the task structure. This happened because the kernel test robot was testing with SLOB, which doesn't actually do the required book-keeping for slab allocations, and as a result the hardening code didn't realize that the task struct allocation was one single allocation - and the sanity checks fail. Since SLOB doesn't even claim to support hardening (and you really shouldn't use it), the straightforward solution is to just make the usercopy hardening code depend on the allocator supporting it. Reported-by: kernel test robot <[email protected]> Cc: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-08-19Merge branch 'i2c/for-current' of ↵Linus Torvalds8-22/+34
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has some pretty standard driver bugfixes and one minor cleanup" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: meson: Use complete() instead of complete_all() i2c: brcmstb: Use complete() instead of complete_all() i2c: bcm-kona: Use complete() instead of complete_all() i2c: bcm-iproc: Use complete() instead of complete_all() i2c: at91: fix support of the "alternative command" feature i2c: ocores: add missed clk_disable_unprepare() on failure paths i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer() i2c: mux: demux-pinctrl: properly roll back when adding adapter fails
2016-08-19Merge tag 'dm-4.8-fixes-2' of ↵Linus Torvalds3-38/+53
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for DM round robin multipath path selector to disable preemption before using this_cpu_ptr() - a slight increase in DM crypt's mempool reserves to make swap ontop of DM crypt more performant - a few DM raid fixes to issues found while testing changes that were merged in v4.8-rc1 * tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: support raid0 with missing metadata devices dm raid: enhance attempt_restore_of_faulty_devices() to support more devices dm raid: fix restoring of failed devices regression dm raid: fix frozen recovery regression dm crypt: increase mempool reserve to better support swapping dm round robin: do not use this_cpu_ptr() without having preemption disabled
2016-08-19Merge tag 'scsi-fixes' of ↵Linus Torvalds6-19/+29
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fairly small fixes. The ipr, mpt3sas and ses ones all trigger oopses. The megaraid one fixes an attach failure on io mapped only cards, the fcoe one is an obvious problem in the error path and the aacraid one is a theoretical security issue (ability to trick the kernel into a buffer overrun)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: Fix racy cleanup of /sys in remove_dev() mpt3sas: Fix resume on WarpDrive flash cards ipr: Fix sync scsi scan megaraid_sas: Fix probing cards without io port aacraid: Check size values after double-fetch from user fcoe: Use kfree_skb() instead of kfree()
2016-08-19Merge tag 'usb-4.8-rc3' of ↵Linus Torvalds31-79/+215
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for your tree. The normal amount of gadget fixes, xhci fixes, new device ids, and a few other minor things. All of them have been in linux-next for a while, the full details are in the shortlog below" * tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) xhci: don't dereference a xhci member after removing xhci usb: xhci: Fix panic if disconnect xhci: really enqueue zero length TRBs. xhci: always handle "Command Ring Stopped" events cdc-acm: fix wrong pipe type on rx interrupt xfers usb: misc: usbtest: add fix for driver hang usb: dwc3: gadget: stop processing on HWO set usb: dwc3: don't set last bit for ISOC endpoints usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG usb: udc: core: fix error handling usb: gadget: fsl_qe_udc: off by one in setup_received_handle() usb/gadget: fix gadgetfs aio support. usb: gadget: composite: Fix return value in case of error usb: gadget: uvc: Fix return value in case of error usb: gadget: fix check in sync read from ep in gadgetfs usb: misc: usbtest: usbtest_do_ioctl may return positive integer usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe() usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() usb: gadget: configfs: add mutex lock before unregister gadget usb: gadget: u_ether: fix dereference after null check coverify warning ...
2016-08-19Merge tag 'xfs-iomap-for-linus-4.8-rc3' of ↵Linus Torvalds11-28/+119
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs and iomap fixes from Dave Chinner: "Changes in this update: Regression fixes for XFS changes introduce in 4.8-rc1: - buffer IO accounting assert failure - ENOSPC block accounting reservation issue - DAX IO path page cache invalidation fix - rmapbt on-disk block count in agf - correct classification of rmap block type when updating AGFL. - iomap support for attribute fork mapping Regression fixes for iomap infrastructure in 4.8-rc1: - fiemap: honor FIEMAP_FLAG_SYNC - fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression - make mark_page_accessed and pagefault_disable usage consistent with other IO paths" * tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: remove OWN_AG rmap when allocating a block from the AGFL xfs: (re-)implement FIEMAP_FLAG_XATTR xfs: simplify xfs_file_iomap_begin iomap: mark ->iomap_end as optional iomap: prepare iomap_fiemap for attribute mappings iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag iomap: remove superflous pagefault_disable from iomap_write_actor iomap: remove superflous mark_page_accessed from iomap_write_actor xfs: store rmapbt block count in the AGF xfs: don't invalidate whole file on DAX read/write xfs: fix bogus space reservation in xfs_iomap_write_allocate xfs: don't assert fail on non-async buffers on ioacct decrement
2016-08-19Merge tag 'hwmon-for-linus-v4.8-rc2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix a bug in it87 driver and URLs in ftsteutates driver" * tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ftsteutates) Correct ftp urls in driver documentation hwmon: (it87) Features mask must be 32 bit wide
2016-08-18Merge tag 'drm-fixes-for-4.8-rc3-2' of ↵Linus Torvalds11-100/+224
git://people.freedesktop.org/~airlied/linux Pull more drm fixes from Dave Airlie: "Daniel pointed out I'd missed some i915 fixes, and I also found a single etnaviv fix I missed. So here they are" * tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux: drm/etnaviv: take GPU lock later in the submit process drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
2016-08-18Merge tag 'devicetree-fixes-for-4.8' of ↵Linus Torvalds5-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - a couple of DT node ref counting fixes - fix __unflatten_device_tree for PPC PCI hotplug case - rework marking irq controllers as OF_POPULATED in cases where real driver is used. - disable of_platform_default_populate_init on PPC. The change in initcall order causes problems which need to be sorted out later. * tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fix reference counting in of_graph_get_endpoint_by_regs of/platform: disable the of_platform_default_populate_init() for all the ppc boards ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver of/irq: Mark interrupt controllers as populated before initialisation drivers/of: Validate device node in __unflatten_device_tree() of: Delete an unnecessary check before the function call "of_node_put"
2016-08-18Merge tag '4.8-doc-fixes' of git://git.lwn.net/linuxLinus Torvalds3-8/+3
Pull documentation fixes from Jonathan Corbet: "Three small fixes for Sphinx-formatted documentation generation" * tag '4.8-doc-fixes' of git://git.lwn.net/linux: doc-rst: customize RTD theme, drop padding of inline literal docs: kernel-documentation: remove some highlight directives docs: Set the Sphinx default highlight language to "guess"
2016-08-19Merge tag 'drm-intel-fixes-2016-08-15' of ↵Dave Airlie10-95/+219
git://anongit.freedesktop.org/drm-intel into drm-fixes Collection of i915 fixes. * tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
2016-08-19Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux ↵Dave Airlie1-5/+5
into drm-fixes Single GPU recovery fix * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: take GPU lock later in the submit process
2016-08-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "An initrd microcode loading fix, and an SMP bootup topology setup fix to resolve crashes on SGI/UV systems if the BIOS is configured in a certain way" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix __max_logical_packages value setup x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
2016-08-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int clocksource/drivers/kona: Fix get_counter() error handling clocksource/drivers/time-armada-370-xp: Fix the clock reference
2016-08-18Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two cputime fixes - hopefully the last ones" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Resync steal time when guest & host lose sync sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
2016-08-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds14-69/+207
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also start/stop filter related fixes, a perf event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Check return value of the perf_event_read() IPI perf/core: Enable mapping of the stop filters perf/core: Update filters only on executable mmap perf/core: Fix file name handling for start/stop filters perf/core: Fix event_function_local() uprobes: Fix the memcg accounting perf intel-pt: Fix occasional decoding errors when tracing system-wide tools: Sync kvm related header files for arm64 and s390 perf probe: Release resources on error when handling exit paths perf probe: Check for dup and fdopen failures perf symbols: Fix annotation of objects with debuginfo files perf script: Don't disable use_callchain if input is pipe perf script: Show proper message when failed list scripts perf jitdump: Add the right header to get the major()/minor() definitions perf ppc64le: Fix build failure when libelf is not present perf tools mem: Fix -t store option for record command perf intel-pt: Fix ip compression
2016-08-18Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two lockless_dereference() related fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/barriers: Suppress sparse warnings in lockless_dereference() Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"
2016-08-18Merge tag 'arm64-fixes' of ↵Linus Torvalds3-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Avoid a literal load with the MMU off on the CPU resume path (potential inconsistency between cache and RAM) - Build error with CONFIG_ACPI=n fixed - Compiler warning in the arch/arm64/mm/dump.c code fixed * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix shift warning in arch/arm64/mm/dump.c arm64: kernel: avoid literal load of virtual address with MMU off arm64: Fix NUMA build error when !CONFIG_ACPI
2016-08-18Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-5/+17
Pull ARM fixes from Russell King: "Only three fixes this time: - Emil found an overflow problem with the memory layout sanity check. - Ard Biesheuvel noticed that late-allocated page tables (for EFI) weren't being properly constructed. - Guenter Roeck reported a problem found on qemu caused by the recent addr_limit changes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: fix address limit restoration for undefined instructions ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit
2016-08-18Merge tag 'pm-4.8-rc3' of ↵Linus Torvalds4-82/+108
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "More hibernation-related material: one fix for a recent regression in the core, one small cleanup of the x86-64 resume code and a documentation update. Specifics: - Fix a hibernate core regression resulting from uncovering a latent bug in its implementation of memory bitmaps by a recent commit (James Morse). - Use __pa() to compute a physical address in the x86-64 code finalizing resume from hibernation (Rafael Wysocki). - Update power management documentation related to system sleep states to remove outdated information from it and to add a description of a recently introduced hibernation debug feature to it (Rafael Wysocki)" * tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation
2016-08-18Merge tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds8-25/+14
Pull drm fixes from Dave Airlie: "Pretty quiet so far: - a few amdgpu/radeon fixup for pcie pm changes - a couple of amdgpu fixes - some build fixes - printk fix" * tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: Change GART offset to 64-bit drm/mediatek: add ARM_SMCCC dependency drm/mediatek: add CONFIG_OF dependency drm/mediatek: add COMMON_CLK dependency drm/amdgpu: Fix memory trashing if UVD ring test fails drm/amdgpu: fix vm init error path drm/amdkfd: print doorbell offset as a hex value Revert "drm/radeon: work around lack of upstream ACPI support for D3cold" Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"
2016-08-18locking/barriers: Suppress sparse warnings in lockless_dereference()Johannes Berg1-3/+3
After Peter's commit: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: Paul E. McKenney <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-08-18Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"Johannes Berg1-1/+1
This reverts commit: fa7d81bb3c269 ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference") As Peter explained: [...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker. [...] Also, clue is in the name: 'dereference', you don't actually dereference the pointer here, only load it. My next patch breaks the compile without this revert, because it assumes you want to deference and thus also need the struct type visible (which it isn't here), so revert it. Tested-by: Paul E. McKenney <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-08-18arm64: Fix shift warning in arch/arm64/mm/dump.cCatalin Marinas1-3/+3
When building with 48-bit VAs and 16K page configuration, it's possible to get the following warning when building the arm64 page table dumping code: arch/arm64/mm/dump.c: In function ‘walk_pud’: arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow] This is because pud_offset(pgd, 0) performs a shift to the right by 36 while the value 0 has the type 'int' by default, therefore 32-bit. This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to use 0UL for the address argument. Acked-by: Mark Rutland <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2016-08-18sched/cputime: Resync steal time when guest & host lose syncWanpeng Li1-3/+15
Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <[email protected]> Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Radim Krcmar <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ Improved the changelog. ] Signed-off-by: Ingo Molnar <[email protected]>
2016-08-18sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regressionPeter Zijlstra1-5/+10
Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by: Mike Galbraith <[email protected]> Tested-by: Mike Galbraith <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Fredrik Markstrom <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Radim <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Wanpeng Li <[email protected]> Cc: [email protected] # 4.3+ Fixes: 9d7fb0427648 ("sched/cputime: Guarantee stime + utime == rtime") Signed-off-by: Ingo Molnar <[email protected]>
2016-08-18perf/core: Check return value of the perf_event_read() IPIDavid Carrillo-Cisneros1-3/+4
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: David Carrillo-Cisneros <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Paul Turner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vegard Nossum <[email protected]> Cc: Vince Weaver <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.