aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21mt76: move token utilities in mt76 common moduleLorenzo Bianconi14-113/+132
Move token management in mt76 common module since it is shared between mt7615, mt7915 and mt7921 drivers Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: move token_lock, token and token_count in mt76_devLorenzo Bianconi11-73/+66
Move token_lock, token and token_count data structures in mt76_dev. This is a preliminary patch to move token management in mt76 common module since it is shared by mt7615, mt7915 and mt7921 drivers. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: fix possible invalid register accessSean Wang1-1/+3
Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: enable deep sleep when the device suspendsSean Wang1-0/+12
Enable the deep sleep mode in suspend handler to reduce the power consumption further. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: introduce mt76_connac_mcu_set_deep_sleep utilitySean Wang2-8/+24
Introduce mt76_connac_mcu_set_deep_sleep to enable deep sleep mode and will be activated immediately when the host returns the ownership to the device. Co-developed-by: Leon Yen <[email protected]> Signed-off-by: Leon Yen <[email protected]> Co-developed-by: YN Chen <[email protected]> Signed-off-by: YN Chen <[email protected]> Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reinit_cond utility routineLorenzo Bianconi4-0/+36
Add mt7921_wpdma_reinit_cond to check dummy reg if driver needs to reinitialized WPDMA after driver_own operation Co-developed-by: Sean Wang <[email protected]> Signed-off-by: Sean Wang <[email protected]> Co-developed-by: Leon Yen <[email protected]> Signed-off-by: Leon Yen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: introduce mt7921_dma_{enable,disable} utilitiesLorenzo Bianconi1-73/+35
Introduce mt7921_dma_enable and mt7921_dma_disable utilities routine in order for code reusing between mt7921_dma_reset and mt7921_dma_init. This is a preliminary patch to reset dma during device driver_own request. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reset utility routineLorenzo Bianconi3-28/+47
Introduce mt7921_wpdma_reset routine to reset wpdma during chip reset or driver_own request. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: move mt7921_dma_reset in dma.cLorenzo Bianconi3-68/+74
Move mt7921_dma_reset routine in dma.c and make mt7921_dma_prefetch static. Moreover add force parameter to mt7921_dma_reset signature. This is a preliminary patch to reset dma mt7921_mcu_drv_pmctrl. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: Fix a dereference of pointer sta before it is null checkedColin Ian King1-1/+2
Currently the assignment of idx dereferences pointer sta before sta is null checked, leading to a potential null pointer dereference. Fix this by assigning idx when it is required after the null check on pointer sta. Addresses-Coverity: ("Dereference before null check") Fixes: a4a5a430b076 ("mt76: mt7615: fix TSF configuration") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: enable sw interruptsLorenzo Bianconi4-7/+25
Enable sw interrupts in order to wake the device from deep sleep receiving packets Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: add awake and doze time accountingLorenzo Bianconi4-7/+55
Introduce awake and doze time accounting for runtime pm. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: remove MT76_STATE_PM in tx pathLorenzo Bianconi1-4/+2
since tx/rx path is now relying pm ref counting, get rid of MT76_STATE_PM check in the tx path Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: use waitqueue for runtime-pmLorenzo Bianconi6-9/+9
Simplify the code using a wait_queue_head_t instead of a completion to wait the chip is fully awake in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: do not run mt76_txq_schedule_all directlyLorenzo Bianconi2-4/+2
In order to not break runtime-pm, do run mt76_txq_schedule_all in mt7615_set_channel/mt7921_set_channel but rely on mt76_worker_schedule Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: rely on pm refcounting in mt7615_led_set_configLorenzo Bianconi1-1/+3
Rely on mt76_connac_pm_ref/mt76_connac_pm_unref utility routines in mt7615_led_set_config Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: alaways wake the device before scanningLorenzo Bianconi3-8/+8
move scanning check from mt76_connac_power_save_sched routine to mt7921_pm_power_save_work/mt7615_pm_power_save_work ones Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: get rid of useless MT76_STATE_PM in mt7921_mac_workLorenzo Bianconi1-5/+0
Remove useless MT76_STATE_PM check in mt7921_mac_work since mt7921_mutex_acquire will wake up the device if necessary Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: remove MT76_STATE_PM in mac_tx_freeLorenzo Bianconi2-10/+0
Get rid of MT76_STATE_PM chec in mt7615_mac_tx_free and mt7921_mac_tx_free since we already rely on mt76_connac_pm_unref in the NAPI callback. Remove mt76_connac_power_save_sched calls in mt7615_mac_tx_free and mt7921_mac_tx_free Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: check wake refcount in mcu_fw_pmctrlLorenzo Bianconi3-2/+14
In order to avoid synchronization races between tx and rx path, rely on mt76_connac_skip_fw_pmctrl putting the chip in sleep mode for mt7921 and mt7663 devices Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: unschedule ps_work in mt76_connac_pm_wakeLorenzo Bianconi3-2/+1
In order to avoid synchronization issues between wake and ps works, cancel ps_work in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi2-6/+34
Introduce mt7615_poll_rx rx napi callback for mt7663. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi3-8/+37
Introduce mt7921_poll_rx rx napi callback for mt7921. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: dma: add the capability to define a custom rx napi poll routineLorenzo Bianconi8-12/+14
Add the capability to define a custom rx napi callback for each driver. This is a preliminary patch to properly support runtime-pm on rx side Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi5-18/+25
Introduce mt7615_tx_worker routine as mt76 tx worker callback for mt7663. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi3-14/+13
Introduce mt7921_tx_worker routine as mt76 tx worker callback for mt7921. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: introduce wake counter for fw_pmctrl synchronizationLorenzo Bianconi1-0/+31
Introduce wake counter and related spinlock in order to synchronize tx/rx path and fw_pmctrl request. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7663: fix a race between mt7615_mcu_drv_pmctrl and mt7615_mcu_fw_pmctrlLorenzo Bianconi2-6/+15
Introduce a mutex in order to avoid a race between mt7615_mcu_lp_drv_pmctrl and mt7615_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1f549009b5b2 ("mt76: mt7615: do not request {driver,fw}_own if already granted") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: fix a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrlLorenzo Bianconi3-10/+26
Introduce a mutex in order to avoid a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: remove leftover function declarationLorenzo Bianconi1-2/+0
Get rid of leftover mt7921_mcu_add_bss_info routine declaration Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: connac: move mcu_update_arp_filter in mt76_connac moduleLorenzo Bianconi8-104/+58
Move mt76_connac_mcu_update_arp_filter in mt76_connac module since the code is shared between mt7615 and mt7921 Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: do not use 0 as NULL pointerLorenzo Bianconi1-1/+1
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1425:70: warning: Using plain integer as NULL pointer Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7915: directly read per-rate tx power from registersShayne Chen2-22/+51
Since driver no longer handler per-rate tx power setting, we need to read the power values directly from registers. Tested-by: Evelyn Tsai <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen8-251/+99
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7915: add support for DT rate power limitsShayne Chen1-6/+38
Enable to limit per-rate max txpower from DT. Tested-by: Evelyn Tsai <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: abort uncompleted scan by wifi resetSean Wang1-0/+8
Scan abort should be required for the uncompleted hardware scan interrupted by wifi reset. Otherwise, it is possible that the scan request after wifi reset gets error code -EBUSY from mac80211 and then blocks the reconnectting to the access point. Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: add wifisys reset support in debugfsSean Wang1-8/+17
Introduce chip_reset knob in mt7921 debugfs to export a way to users able to trigger wifi reset, and group the similar operations previously defined in chip_config in the same knob. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutexLorenzo Bianconi1-1/+4
Wake the chip before configuring the mcu log level Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: improve mcu error loggingLorenzo Bianconi5-10/+8
Dump mcu command code in hex and related prefix to help debugging Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: move hw configuration in mt7921_register_deviceLorenzo Bianconi2-13/+6
Get rid of init work since firmware loading is already performed in mt7921_init_hardware Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee9-10/+199
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: load ROM patch before checking patch semaphore statusFelix Fietkau1-14/+16
For MT7663, the availability of the patch files is used to detect, which corresponding firmware is going to be used (AP firmware or STA offload firmware). If the ROM patch was already applied, it could attempt to load the wrong firmware (without considering the alternative). Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: fix entering driver-own state on mt7663Felix Fietkau1-2/+10
Fixes hardware wakeup issues Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: fix hardware error recovery for mt7663Felix Fietkau5-11/+53
MT7663 uses different bits for communicating reset commands/status between MCU and host. Also add an extra initial reset command. Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7921: add dumping Tx power tableSean Wang5-0/+151
Dump the tx power table saved in offload firmware. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: introduce single-sku support for mt7663/mt7921Lorenzo Bianconi6-1/+170
Introduce support for rate-txpower compensation for mt7663/mt7921 chipsets. Rate-txpower limit is specified through dts Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: do not use mt7615 single-sku values for mt7663Lorenzo Bianconi1-0/+5
mt7663 mcu relies on different APIs to configure APIs per-rate power limit respect to mt7615 driver. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: mt7615: implement support for using DT rate power limitsFelix Fietkau2-2/+69
Limits are used to update the channel max_power settings and also passed to the firmware on channel changes Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: extend DT rate power limits to support 11ax devicesShayne Chen2-23/+40
Enable parsing per-rate txpower limits from DT for 11ax chipsets. Co-developed-by: Felix Fietkau <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Tested-by: Evelyn Tsai <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2021-04-21mt76: add functions for parsing rate power limits from DTFelix Fietkau2-0/+216
This subnode can be used to set per-rate tx power limits either per country code / regdomain or globally. These limits are typically provided by the device manufacturers and are used to limit sideband emissions and stay within regulatory limits Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.