| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
(regression fix since fbdev/kms rework).
My fb rework didn't remember about the 84/65s.
Reported-by: Ondrej Zary <[email protected]>
Tested-by: Ondrej Zary <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
At some point this was exposed (not sure how),
linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type
linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func':
linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete'
linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd':
linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion'
linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion'
and the fix is just to add the header.
Signed-off-by: Daniel Walker <[email protected]>
|
|
Save/restore MISC_ENABLE register on suspend/resume.
This fixes OOPS (invalid opcode) on resume from STR on Asus P4P800-VM,
which wakes up with MWAIT disabled.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15385
Signed-off-by: Ondrej Zary <[email protected]>
Tested-by: Alan Stern <[email protected]>
Acked-by: H. Peter Anvin <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 96d60303fd (ahci: Turn off DMA engines when there's no device)
implemented stopping DMA engines on empty ports but it used single
sampling of status registers to determine device presence which led to
disabling of DMA engines on occupied ports. Do it after all EH
actions are complete using device presence state determined by EH.
This avoids spurious disabling of DMA engines and simplifies the code.
Signed-off-by: Tejun Heo <[email protected]>
Tested-by: Marc Dionne <[email protected]>
Cc: Matthew Garrett <[email protected]>
Cc: Robert Hancock <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
|
|
The sata_sil24 driver has six 16-bit registers that are initialised with
32-bit writes. This cause a kernel panic on ARM due to the unaligned
accesses which result.
This patch changes the accesses to the correct 16-bit ones.
Signed-off-by: Colin Tuckley <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
|
|
JMB362 is a new variant of jmicron controller which is similar to
JMB360 but has two SATA ports instead of one. As there is no PATA
port, single function AHCI mode can be used as in JMB360. Add pci
quirk for JMB362.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Aries Lee <[email protected]>
Cc: [email protected]
Signed-off-by: Jeff Garzik <[email protected]>
|
|
Add Joseph Chan's explanation of the problem and workaround to the
VT6421 magic fix.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Joseph Chan <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
|
|
This makes "iw wlan0 dump survey" work again with
mac80211-based drivers that support it, e.g. ath5k.
Signed-off-by: Holger Schurig <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
Remove my name from the MAINTAINERS file.
Signed-off-by: Zhu Yi <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
If the channel is not set yet and we configure the antennas just store the
setting. It will be activated during the next reset, when the channel is set.
Signed-off-by: Bruno Randolf <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
Add Dell WLA3310 USB wireless card, which has a Z-Com XG-705A chipset, to the
USB Ids in p54usb.
Signed-off-by: Jason Dravet <[email protected]>
Tested-by: Richard Gregory Tillmore <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Acked-by: Christian Lamparter <[email protected]>
Cc: <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
wl1251_sdio_probe() error path is missing wl1251_free_hw, add it.
Signed-off-by: Grazvydas Ignotas <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Cc: [email protected]
Signed-off-by: John W. Linville <[email protected]>
|
|
Commit a8408c17 introduced a new check to pccard_validate_cis(),
which avoids any "late" calls to this function. This broke the
insertion of cards which require a CIS override which changes
the number of card functions. Fix this by asserting that this
is _not_ a late call, but a proper call early during the card
insertion process.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16138
Reported-by: Mikulas Patocka <[email protected]>
CC: <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
|
|
Patch c7c2fa07 removed one line too much from smc91c92_cs.c.
Reported-by: Komuro <[email protected]>
CC: [email protected]
CC: [email protected]
Signed-off-by: Dominik Brodowski <[email protected]>
|
|
Seems pointless to have two #ifdef's with the same
CONFIG_YENTA_TI. Remove the extra one and
move CARDBUS_TYPE_ENE with the others.
[[email protected]: spelling & whitespace fixes]
Signed-off-by: Justin P. Mattock <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
|
|
Keeping the saved I365_CSCINT flag around breaks PCMCIA on some system,
and is only needed on a few systems to get PCMCIA to work. This patch
allows PCMCIA to work on both types, and it fixes
https://bugzilla.kernel.org/show_bug.cgi?id=16015
Reported-by: Justin P. Mattock <[email protected]>
CC: <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
|
|
At the point of the call to dev_err, wm8350 is NULL.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@
if ((E == NULL && ...) || ...)
{
... when != if (...) S1 else S2
when != E = E1
* E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
ipmr_rules_exit() and ip6mr_rules_exit() free a list of items, but
forget to properly remove these items from list. List head is not
changed and still points to freed memory.
This can trigger a fault later when icmpv6_sk_exit() is called.
Fix is to either reinit list, or use list_del() to properly remove items
from list before freeing them.
bugzilla report : https://bugzilla.kernel.org/show_bug.cgi?id=16120
Introduced by commit d1db275dd3f6e4 (ipv6: ip6mr: support multiple
tables) and commit f0ad0860d01e (ipv4: ipmr: support multiple tables)
Reported-by: Alex Zhavnerchik <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
CC: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix potential initial_lfsr buffer overrun.
Writing past the end of the buffer could happen when index == ENTRIES
Signed-off-by: Denis Kirjanov <[email protected]>
Cc: [email protected]
Signed-off-by: Robert Richter <[email protected]>
|
|
Fix rtl_chip_info buffer overrun when we can't identify the chip.
(i = ARRAY_SIZE (rtl_chip_info) in this case)
Signed-off-by: Denis Kirjanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Driver checks received packet is too large in asix_rx_fixup() and fails if it is. Problem is
that MTU might be set larger than 1500 and asix fails to work correctly with VLAN tagged
packets. The check should be 'dev->net->mtu + ETH_HLEN' instead.
Tested with AX88772.
Signed-off-by: Jussi Kivilinna <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 962400e8fd29981a7b166e463dd143b6ac6a3e76, which was
entirely bogus.
The code used to multiply the character offset by "vc->vc_cols", and
that's actually correct, because 'd' itself is an 'unsigned short'. So
the pointer arithmetic already takes the size of a VGA character into
account. Changing it to use vc_size_row (which is just "vc_cols"
shifted up to take the size of the character into account) ends up
multiplying with the VGA character size twice.
This got reported as bugs for various other subsystems, because what it
actually results in is writing the 16-bit vc_video_erase_char pattern
(usually 0x0720: 0x07 is the default attribute, 0x20 is ASCII space)
into some random other allocation.
So Markus ended up reporting this as a ext4 bug, while to Torsten Kaiser
it looked like a problem with KMS or libata. Jeff Chua saw it in
different places.
And finally - Justin Mattock had slab poisoning enabled, and saw it as a
slab poison overwritten. And bisected and reverted this to verify the
buggy commit.
Reported-by: Markus Trippelsdorf <[email protected]>
Reported-by: Torsten Kaiser <[email protected]>
Reported-by: Jeff Chua <[email protected]>
Reported-by: Justin P. Mattock <[email protected]>
Reported-bisected-and-tested-by: Justin P. Mattock <[email protected]>
Acked-by: Dave Airlie <[email protected]>
Cc: Frank Pan <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some configurations need delay between the "write completed" indication
and new write to work reliably.
Realtek driver seems to use longer delay when polling the "write complete"
bit, so it waits long enough between writes with high probability (but
could probably break too). This patch adds a new udelay to make sure we
wait unconditionally some time after the write complete indication.
This caused a regression with XID 18000000 boards when the board specific
phy configuration writing many mdio registers was added in commit
2e955856ff (r8169: phy init for the 8169scd). Some of the configration
mdio writes would almost always fail, and depending on failure might leave
the PHY in non-working state.
Signed-off-by: Timo Teräs <[email protected]>
Acked-off-by: Francois Romieu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
jffs2 didn't update the ctime of the file when its permission was changed.
Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1275289822
# setfacl -m 'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1275289822 <- unchanged
But, according to the spec of the ctime, jffs2 must update it.
Port of ext3 patch by Miao Xie <[email protected]>.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
|
|
Move the sysfs_create_group to iwl_ucode_callback after we
have safely got the firmware.
The motivation to do this comes from a warning from lockdep which detected
that we request priv->mutex while holding s_active during a sysfs request
(show_statistics in the example copy pasted). The reverse order exists upon
request_firmware: request_firmware which is a sysfs operation
that requires s_active is run under priv->mutex.
This ensures that we don't get sysfs request before we finish to request
the firmware, avoiding this deadlock.
=======================================================
[ INFO: possible circular locking dependency detected ]
-------------------------------------------------------
cat/2595 is trying to acquire lock:
(&priv->mutex){+.+.+.}, at: [<facfa598>] show_statistics+0x48/0x100 [iwlagn]
but task is already holding lock:
(s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (s_active){++++.+}:
[<c0489b74>] __lock_acquire+0xc44/0x1230
[<c048a1ed>] lock_acquire+0x8d/0x110
[<c0581499>] sysfs_addrm_finish+0xe9/0x180
[<c057f64a>] sysfs_hash_and_remove+0x4a/0x80
[<c05829d4>] sysfs_remove_group+0x44/0xd0
[<c0714b75>] dpm_sysfs_remove+0x15/0x20
[<c070dac8>] device_del+0x38/0x170
[<c070dc1e>] device_unregister+0x1e/0x60
[<c071838d>] _request_firmware+0x29d/0x550
[<c07186c7>] request_firmware+0x17/0x20
[<fad01bf1>] iwl_mac_start+0xb1/0x1230 [iwlagn]
[<fa46ba06>] ieee80211_open+0x436/0x6f0 [mac80211]
[<c0808cd2>] dev_open+0x92/0xf0
[<c0808b2b>] dev_change_flags+0x7b/0x190
[<c08148e8>] do_setlink+0x178/0x3b0
[<c0815169>] rtnl_setlink+0xf9/0x130
[<c081453b>] rtnetlink_rcv_msg+0x1bb/0x1f0
[<c0827ce6>] netlink_rcv_skb+0x86/0xa0
[<c081436c>] rtnetlink_rcv+0x1c/0x30
[<c08279c3>] netlink_unicast+0x263/0x290
[<c0828768>] netlink_sendmsg+0x1c8/0x2a0
[<c07f85fd>] sock_sendmsg+0xcd/0x100
[<c07f964d>] sys_sendmsg+0x15d/0x290
[<c07f9e6b>] sys_socketcall+0xeb/0x2a0
[<c040ad9f>] sysenter_do_call+0x12/0x38
-> #0 (&priv->mutex){+.+.+.}:
[<c0489f84>] __lock_acquire+0x1054/0x1230
[<c048a1ed>] lock_acquire+0x8d/0x110
[<c08bb358>] __mutex_lock_common+0x58/0x470
[<c08bb84a>] mutex_lock_nested+0x3a/0x50
[<facfa598>] show_statistics+0x48/0x100 [iwlagn]
[<c070d219>] dev_attr_show+0x29/0x50
[<c057fecd>] sysfs_read_file+0xdd/0x190
[<c052880f>] vfs_read+0x9f/0x190
[<c0528d22>] sys_read+0x42/0x70
[<c040ad9f>] sysenter_do_call+0x12/0x38
other info that might help us debug this:
3 locks held by cat/2595:
#0: (&buffer->mutex){+.+.+.}, at: [<c057fe25>] sysfs_read_file+0x35/0x190
#1: (s_active){++++.+}, at: [<c0580ecd>] sysfs_get_active_two+0x2d/0x50
#2: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50
stack backtrace:
Pid: 2595, comm: cat Not tainted 2.6.33-tp-rc4 #2
Call Trace:
[<c08b99ab>] ? printk+0x1d/0x22
[<c0487752>] print_circular_bug+0xc2/0xd0
[<c0489f84>] __lock_acquire+0x1054/0x1230
[<c0478d81>] ? sched_clock_cpu+0x121/0x180
[<c048a1ed>] lock_acquire+0x8d/0x110
[<facfa598>] ? show_statistics+0x48/0x100 [iwlagn]
[<c08bb358>] __mutex_lock_common+0x58/0x470
[<facfa598>] ? show_statistics+0x48/0x100 [iwlagn]
[<c08bb84a>] mutex_lock_nested+0x3a/0x50
[<facfa598>] ? show_statistics+0x48/0x100 [iwlagn]
[<facfa598>] show_statistics+0x48/0x100 [iwlagn]
[<c0580cf9>] ? sysfs_get_active+0x69/0xb0
[<facfa550>] ? show_statistics+0x0/0x100 [iwlagn]
[<c070d219>] dev_attr_show+0x29/0x50
[<c057fecd>] sysfs_read_file+0xdd/0x190
[<c05ff314>] ? security_file_permission+0x14/0x20
[<c0528242>] ? rw_verify_area+0x62/0xd0
[<c052880f>] vfs_read+0x9f/0x190
[<c047745b>] ? up_read+0x1b/0x30
[<c057fdf0>] ? sysfs_read_file+0x0/0x190
[<c04af3b4>] ? audit_syscall_entry+0x1f4/0x220
[<c0528d22>] sys_read+0x42/0x70
[<c040ad9f>] sysenter_do_call+0x12/0x38
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
|
|
Add "Wey-Yi Guy" to maintainers list for iwlwifi.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
|
|
Port of internal scan to iwl3945 missed introduction
of iwl3945_get_single_channel_for_scan.
Fix the following bug by introducing the iwl3945_get_single_channel_for_scan
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208
Signed-off-by: Abhijeet Kolekar <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
|
|
We learn from
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1834 and
https://bugzilla.redhat.com/show_bug.cgi?id=589777
that 3945 can also suffer from a stuck command queue. Enable stuck queue
detection for iwl3945 to enable recovery in this case.
Signed-off-by: Reinette Chatre <[email protected]>
|
|
|
|
Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.
Fixes:
Bug 28335 - Cursor corruption caused by commit 9b8c4a0b21
https://bugs.freedesktop.org/show_bug.cgi?id=28335
Signed-off-by: Chris Wilson <[email protected]>
Reported-and-tested-by: Jeff Chua <[email protected]>
Tested-by: Linus Torvalds <[email protected]>
Reported-by: Andy Isaacson <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags
ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files
|
|
A few functions were still modifying i_flags in a racy manner.
Signed-off-by: Dmitry Monakhov <[email protected]>
Signed-off-by: "Theodore Ts'o" <[email protected]>
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: improve xfs_isilocked
xfs: skip writeback from reclaim context
xfs: remove done roadmap item from xfs-delayed-logging-design.txt
xfs: fix race in inode cluster freeing failing to stale inodes
xfs: fix access to upper inodes without inode64
xfs: fix might_sleep() warning when initialising per-ag tree
fs/xfs/quota: Add missing mutex_unlock
xfs: remove duplicated #include
xfs: convert more trace events to DEFINE_EVENT
xfs: xfs_trace.c: remove duplicated #include
xfs: Check new inode size is OK before preallocating
xfs: clean up xlog_align
xfs: cleanup log reservation calculactions
xfs: be more explicit if RT mount fails due to config
xfs: replace E2BIG with EFBIG where appropriate
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
X25: remove duplicated #include
tcp: use correct net ns in cookie_v4_check()
rps: tcp: fix rps_sock_flow_table table updates
ppp_generic: fix multilink fragment sizes
syncookies: remove Kconfig text line about disabled-by-default
ixgbe: only check pfc bits in hang logic if pfc is enabled
net: check for refcount if pop a stacked dst_entry
ixgbe: return IXGBE_ERR_RAR_INDEX when out of range
act_pedit: access skb->data safely
sfc: Store port number in net_device::dev_id
epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN
tehuti: return -EFAULT on copy_to_user errors
isdn/kcapi: return -EFAULT on copy_from_user errors
e1000e: change logical negate to bitwise
sfc: Get port number from CS_PORT_NUM, not PCI function number
cls_u32: use skb_header_pointer() to dereference data safely
TCP: tcp_hybla: Fix integer overflow in slow start increment
act_nat: fix the wrong checksum when addr isn't in old_addr/mask
net/fec: fix pm to survive to suspend/resume
korina: count RX DMA OVR as rx_fifo_error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: remove obsolete declarations of cache constructor and destructor
nilfs2: fix style issue in nilfs_destroy_cachep
|
|
With mtu=9000, mld_newpack() use order-2 GFP_ATOMIC allocations, that
are very unreliable, on machines where PAGE_SIZE=4K
Limit allocated skbs to be at most one page. (order-0 allocations)
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Minix: Clean up left over label
fix truncate inode time modification breakage
fix setattr error handling in sysfs, configfs
fcntl: return -EFAULT if copy_to_user fails
wrong type for 'magic' argument in simple_fill_super()
fix the deadlock in qib_fs
mqueue doesn't need make_bad_inode()
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: fix bne2 "gave up waiting for init of module libcrc32c"
module: verify_export_symbols under the lock
module: move find_module check to end
module: make locking more fine-grained.
module: Make module sysfs functions private.
module: move sysfs exposure to end of load_module
module: fix kdb's illicit use of struct module_use.
module: Make the 'usage' lists be two-way
|
|
Problem: it's hard to avoid an init routine stumbling over a
request_module these days. And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.
In this particular case, it's libcrc32c:
libcrc32c_mod_init
crypto_alloc_shash
crypto_alloc_tfm
crypto_find_alg
crypto_alg_mod_lookup
crypto_larval_lookup
request_module
If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.
Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock. Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.
Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
external user (the out-of-tree ksplice patches).
Signed-off-by: Rusty Russell <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Tim Abbot <[email protected]>
Tested-by: Brandon Philips <[email protected]>
|
|
It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.
So we check this just after we check for duplicate modules, and just
before we put the module in the global list.
(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: Rusty Russell <[email protected]>
|
|
I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).
Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.
In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: Rusty Russell <[email protected]>
|
|
Kay Sievers <[email protected]> reports that we still have some
contention over module loading which is slowing boot.
Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.
This is more ambitious: we only grab the lock where we need it.
Signed-off-by: Rusty Russell <[email protected]>
Cc: Brandon Philips <[email protected]>
Cc: Kay Sievers <[email protected]>
Cc: Linus Torvalds <[email protected]>
|
|
These were placed in the header in ef665c1a06 to get the various
SYSFS/MODULE config combintations to compile.
That may have been necessary then, but it's not now. These functions
are all local to module.c.
Signed-off-by: Rusty Russell <[email protected]>
Cc: Randy Dunlap <[email protected]>
|
|
This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.
This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: Rusty Russell <[email protected]>
|
|
Linus changed the structure, and luckily this didn't compile any more.
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Martin Hicks <[email protected]>
|
|
When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.
It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".
In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module. But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.
By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Rusty Russell <[email protected]> (cleaned & rebased)
|
|
Remove duplicated #include('s) in drivers/net/wan/x25_asy.c
Signed-off-by: Huang Weiyi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Its better to make a route lookup in appropriate namespace.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
I believe a moderate SYN flood attack can corrupt RFS flow table
(rps_sock_flow_table), making RPS/RFS much less effective.
Even in a normal situation, server handling short lived sessions suffer
from bad steering for the first data packet of a session, if another SYN
packet is received for another session.
We do following action in tcp_v4_rcv() :
sock_rps_save_rxhash(sk, skb->rxhash);
We should _not_ do this if sk is a LISTEN socket, as about each
packet received on a LISTEN socket has a different rxhash than
previous one.
-> RPS_NO_CPU markers are spread all over rps_sock_flow_table.
Also, it makes sense to protect sk->rxhash field changes with socket
lock (We currently can change it even if user thread owns the lock
and might use rxhash)
This patch moves sock_rps_save_rxhash() to a sock locked section,
and only for non LISTEN sockets.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|