aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30e1000e: continue to init PHY even when failed to disable ULPAaron Ma1-3/+1
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows for ME systems")', ThinkPad P14s always failed to disable ULP by ME. 'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")' break out of init phy: error log: [ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet [ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1. If continue to init phy like before, it can work as before. iperf test result good too. Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed") Signed-off-by: Aaron Ma <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30Merge tag 'devfreq-next-for-5.9' of ↵Rafael J. Wysocki8-69/+218
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for v5.9 from Chanwoo Choi: 1. Update devfreq core - Add delayed timer support for polling mode. Until now, devfreq supported only deferrable timer to avoid unneeded CPU wakeups. However, it has a problem for non-CPU devices, like DMC, doing DMA. Such devices need to monitor continuously regardless of the CPU state, so delayed timer support for the polling mode to facilitate the continuous monitoring. - Fix indentation of result of devfreq_summary debugfs node. - Fix the wrong end of code with a semicolon instead of a comma. - Clean-up code to use a unified local variable name in sysfs-related internal funcitons. - Fix trivial spelling mistake in devfreq-event.c. 2. Update devfreq drivers - Add the exception handling code to control when rockchip,pmu property is absent for rk3399_dmc.c. - Add missing 'rockchip,pmu' property to dt-binding document for rk3399_dmc.c. - Change the type of timer in exynos5422-dmc.c from deferrable to delayed in order to monitor the DMC (Dynamic Memory Controller) status regardless of the CPU idle state. Also adjust the polling interval and upthreshold value in order to react faster and make better decisions when benchmarking testing for the memory behavior. - Add module parameter to either enable or disable the IRQ mode for DMC behavior monitoring. exynos5422-dmc.c can operate in both the polling and the IRQ mode. The user can choose the monitoring mode via a module param. The default monitoring mode is the polling mode with a delayed timer. 3. Add maintainer entry - Add Dmitry Osipenko <[email protected]> as maintainer for memory frequency scaling drivers for Nvidia Tegra. He has developed and reviewed tegra*-devfreq.c. * tag 'devfreq-next-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
2020-07-30Merge tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds4-12/+17
Pull block fixes from Jens Axboe: "Three NVMe fixes" * tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block: nvme: add a Identify Namespace Identification Descriptor list quirk nvme-pci: prevent SK hynix PC400 from using Write Zeroes command nvme-tcp: fix possible hang waiting for icresp response
2020-07-30Merge tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+5
Pull io_uring fixes from Jens Axboe: "Two small fixes for corner/error cases" * tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block: io_uring: fix lockup in io_fail_links() io_uring: fix ->work corruption with poll_add
2020-07-30cpufreq: intel_pstate: Fix EPP setting via sysfs in active modeRafael J. Wysocki1-5/+12
Because intel_pstate_set_energy_pref_index() reads and writes the MSR_HWP_REQUEST register without using the cached value of it used by intel_pstate_hwp_boost_up() and intel_pstate_hwp_boost_down(), those functions may overwrite the value written by it and so the EPP value set via sysfs may be lost. To avoid that, make intel_pstate_set_energy_pref_index() take the cached value of MSR_HWP_REQUEST just like the other two routines mentioned above and update it with the new EPP value coming from user space in addition to updating the MSR. Note that the MSR itself still needs to be updated too in case hwp_boost is unset or the boosting mechanism is not active at the EPP change time. Fixes: e0efd5be63e8 ("cpufreq: intel_pstate: Add HWP boost utility and sched util hooks") Reported-by: Francisco Jerez <[email protected]> Cc: 4.18+ <[email protected]> # 4.18+: 3da97d4db8ee cpufreq: intel_pstate: Rearrange ... Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Francisco Jerez <[email protected]>
2020-07-30cpufreq: intel_pstate: Rearrange the storing of new EPP valuesRafael J. Wysocki1-20/+15
Move the locking away from intel_pstate_set_energy_pref_index() into its only caller and drop the (now redundant) return_pref label from it. Also move the "raw" EPP value check into the caller of that function, so as to do it before acquiring the mutex, and reduce code duplication related to the "raw" EPP values processing somewhat. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Francisco Jerez <[email protected]>
2020-07-30random: fix circular include dependency on arm64 after addition of percpu.hWilly Tarreau1-1/+1
Daniel Díaz and Kees Cook independently reported that commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") broke arm64 due to a circular dependency on include files since the addition of percpu.h in random.h. The correct fix would definitely be to move all the prandom32 stuff out of random.h but for backporting, a smaller solution is preferred. This one replaces linux/percpu.h with asm/percpu.h, and this fixes the problem on x86_64, arm64, arm, and mips. Note that moving percpu.h around didn't change anything and that removing it entirely broke differently. When backporting, such options might still be considered if this patch fails to help. [ It turns out that an alternate fix seems to be to just remove the troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h> that causes the circular dependency. But we might as well do the whole belt-and-suspenders thing, and minimize inclusion in <linux/random.h> too. Either will fix the problem, and both are good changes. - Linus ] Reported-by: Daniel Díaz <[email protected]> Reported-by: Kees Cook <[email protected]> Tested-by: Marc Zyngier <[email protected]> Fixes: f227e3ec3b5c Cc: Stephen Rothwell <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-07-30MAINTAINERS: Include drivers subdirs for ARM PMU PROFILING AND DEBUGGING entryJohn Garry1-1/+1
Ensure that the ARM PMU PROFILING AND DEBUGGING maintainers are included for the HiSilicon PMU driver. Signed-off-by: John Garry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-07-30arm64: csum: Fix handling of bad packetsRobin Murphy1-2/+3
Although iph is expected to point to at least 20 bytes of valid memory, ihl may be bogus, for example on reception of a corrupt packet. If it happens to be less than 5, we really don't want to run away and dereference 16GB worth of memory until it wraps back to exactly zero... Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers") Reported-by: guodeqing <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-07-30arm64: Drop unnecessary include from asm/smp.hMarc Zyngier1-1/+0
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825 ("arm64: simplify ptrauth initialization") removed the keys from the secondary_data structure. This also cures a compilation issue introduced by f227e3ec3b5c ("random32: update the net random state on interrupt and activity"). Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization") Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-07-30arm64/alternatives: move length validation inside the subsectionSami Tolvanen1-2/+2
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") breaks LLVM's integrated assembler, because due to its one-pass design, it cannot compute instruction sequence lengths before the layout for the subsection has been finalized. This change fixes the build by moving the .org directives inside the subsection, so they are processed after the subsection layout is known. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Signed-off-by: Sami Tolvanen <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1078 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-07-30intel_idle: Customize IceLake server supportChen Yu1-0/+36
On ICX platform, the C1E auto-promotion is enabled by default. As a result, the CPU might fall into C1E more offen than previous platforms. Besides, the C1E is not exposed to sysfs on ICX, which is inconsistent with previous server platforms. So disable C1E auto-promotion and expose C1E as a separate idle state, so the C1E and C6 can be disabled via sysfs when necessary. Beside C1 and C1E, the exit latency of C6 was measured by a dedicated tool. However the exit latency(41us) exposed by _CST is much smaller than the one we measured(128us). This is probably due to the _CST uses the exit latency when woken up from PC0+C6, rather than PC6+C6 when C6 was measured. Choose the latter as we need the longest latency in theory. Reported-by: kernel test robot <[email protected]> Tested-by: Artem Bityutskiy <[email protected]> Acked-by: Artem Bityutskiy <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Signed-off-by: Chen Yu <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-07-30virtio-mem: Fix build error due to improper use 'select'Weilong Chen1-1/+1
As noted in: https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt "select should be used with care. select will force a symbol to a value without visiting the dependencies." Config VIRTIO_MEM should not select CONTIG_ALLOC directly. Otherwise it will cause an error: https://bugzilla.kernel.org/show_bug.cgi?id=208245 Signed-off-by: Weilong Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: David Hildenbrand <[email protected]>
2020-07-30Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework updates for v5.9 from Viresh Kumar: "This contains following changes: - Fix HTTP links (Alexander A. Klimov). - Allow disabled OPPs in dev_pm_opp_get_freq() (Andrew-sh.Cheng). - Add missing export (Valdis Kletnieks)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Allow disabled OPPs in dev_pm_opp_get_freq() opp: ti-opp-supply: Replace HTTP links with HTTPS ones opp: core: Add missing export for dev_pm_opp_adjust_voltage
2020-07-30Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"Alex Deucher1-3/+6
This regressed some working configurations so revert it. Will fix this properly for 5.9 and backport then. This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-07-30drm/amd/display: Clear dm_state for fast updatesMazin Rezk1-9/+27
This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is deferred to the workqueue. 2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is deferred to the workqueue. 3. Commit #2 starts before commit #1, dm_state #1 is used in the commit_tail and commit #2 completes, freeing dm_state #1. 4. Commit #1 starts after commit #2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <[email protected]> Signed-off-by: Mazin Rezk <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-07-30drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()Peilin Ye1-1/+2
Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: [email protected] Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Suggested-by: Dan Carpenter <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-07-30RDMA/core: Free DIM memory in error unwindLeon Romanovsky1-0/+1
The memory allocated for the DIM wasn't freed in in error unwind path, fix it by calling to rdma_dim_destroy(). Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Max Gurtovoy <[email protected] <mailto:[email protected]>> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30RDMA/core: Stop DIM before destroying CQLeon Romanovsky1-3/+10
HW destroy operation should be last operation after all possible CQ users completed their work, so move DIM work cancellation before such destroy call. Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30RDMA/mlx5: Initialize QP mutex for the debug kernelsLeon Romanovsky1-4/+1
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and the magic field inside lock was missing. This caused to the following kernel warning for kernels build with CONFIG_DEBUG_MUTEXES. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940 Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw] CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x60e/0x940 Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89 RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028 R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002 R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610 FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? cmd_exec+0x947/0xe60 [mlx5_core] ? __mutex_lock+0x76/0x940 ? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib] __rdma_counter_bind_qp+0x6b/0xa0 [ib_core] rdma_counter_bind_qp_auto+0x363/0x520 [ib_core] _ib_modify_qp+0x316/0x580 [ib_core] ib_modify_qp_with_udata+0x19/0x30 [ib_core] modify_qp+0x4c4/0x600 [ib_uverbs] ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs] ? lock_acquire+0xb9/0x3a0 ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs] ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ksys_ioctl+0x234/0x7d0 ? exc_page_fault+0x202/0x640 ? do_syscall_64+0x1f/0x2e0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x2e0 ? asm_exc_page_fault+0x8/0x30 ? rcu_read_lock_sched_held+0x52/0x60 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30arm64/mm: save memory access in check_and_switch_context() fast switch pathPingfan Liu2-8/+8
On arm64, smp_processor_id() reads a per-cpu `cpu_number` variable, using the per-cpu offset stored in the tpidr_el1 system register. In some cases we generate a per-cpu address with a sequence like: cpu_ptr = &per_cpu(ptr, smp_processor_id()); Which potentially incurs a cache miss for both `cpu_number` and the in-memory `__per_cpu_offset` array. This can be written more optimally as: cpu_ptr = this_cpu_ptr(ptr); Which only needs the offset from tpidr_el1, and does not need to load from memory. The following two test cases show a small performance improvement measured on a 46-cpus qualcomm machine with 5.8.0-rc4 kernel. Test 1: (about 0.3% improvement) #cat b.sh make clean && make all -j138 #perf stat --repeat 10 --null --sync sh b.sh - before this patch Performance counter stats for 'sh b.sh' (10 runs): 298.62 +- 1.86 seconds time elapsed ( +- 0.62% ) - after this patch Performance counter stats for 'sh b.sh' (10 runs): 297.734 +- 0.954 seconds time elapsed ( +- 0.32% ) Test 2: (about 1.69% improvement) 'perf stat -r 10 perf bench sched messaging' Then sum the total time of 'sched/messaging' by manual. - before this patch total 0.707 sec for 10 times - after this patch totol 0.695 sec for 10 times Signed-off-by: Pingfan Liu <[email protected]> Acked-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Cc: Steve Capper <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Vladimir Murzin <[email protected]> Cc: Jean-Philippe Brucker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2020-07-30arm64: sigcontext.h: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "the". Signed-off-by: Randy Dunlap <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2020-07-30arm64: ptrace.h: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "the". Signed-off-by: Randy Dunlap <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2020-07-30arm64: pgtable-hwdef.h: delete duplicated wordsRandy Dunlap1-2/+2
Drop the repeated words "at" and "the". Signed-off-by: Randy Dunlap <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2020-07-30mac80211: remove STA txq pending airtime underflow warningFelix Fietkau1-3/+1
This warning can trigger if there is a mismatch between frames that were sent with the sta pointer set vs tx status frames reported for the sta address. This can happen due to race conditions on re-creating stations, or even in the case of .sta_add/remove being used instead of .sta_state, which can cause frames to be sent to a station that has not been uploaded yet. If there is an actual underflow issue, it should show up in the device airtime warning below, so it is better to remove this one. Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: Fix bug in Tx ack status reporting in 802.3 xmit pathVasanthakumar Thiagarajan1-3/+4
Allocated ack_frame id from local->ack_status_frames is not really stored in the tx_info for 802.3 Tx path. Due to this, tx ack status is not reported and ack_frame id is not freed for the buffers requiring tx ack status. Also move the memset to 0 of tx_info before IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Vasanthakumar Thiagarajan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30cfg80211: check vendor command doit pointer before useJulian Squires1-3/+3
In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw. I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV. Signed-off-by: Julian Squires <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: mesh: Free pending skb when destroying a mpathRemi Pommarel1-0/+1
A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386f99c (mac80211: mesh: move path tables into if_mesh) Signed-off-by: Remi Pommarel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: mesh: Free ie data when leaving meshRemi Pommarel1-0/+1
At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30PM / devfreq: Fix the wrong end with semicolonChanwoo Choi1-2/+2
Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: Fix indentaion of devfreq_summary debugfs nodeChanwoo Choi1-7/+4
The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: [email protected] Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: Clean up the devfreq instance name in sysfs attrChanwoo Choi1-34/+60
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30memory: samsung: exynos5422-dmc: Add module param to control IRQ modeLukasz Luba1-2/+7
The driver can operate in two modes relaying on devfreq monitoring mechanism which periodically checks the device status or it can use interrupts when they are provided by loaded Device Tree. The newly introduced module parameter can be used to choose between devfreq monitoring and internal interrupts without modifying the Device Tree. It also sets devfreq monitoring as default when the parameter is not set (also the case for default when the driver is not built as a module). Reported-by: Willy Wolff <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30memory: samsung: exynos5422-dmc: Adjust polling interval and uptresholdLukasz Luba1-2/+2
In order to react faster and make better decisions under some workloads, benchmarking the memory subsystem behavior, adjust the polling interval and upthreshold value used by the simple_ondemand governor. Reported-by: Willy Wolff <[email protected]> Reviewed-by: Chanwoo Choi <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30memory: samsung: exynos5422-dmc: Use delayed timer as defaultChanwoo Choi1-0/+1
Use delayed timer as default instead of deferrable timer in order to monitor the DMC status regardless of CPU idle. Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Lukasz Luba <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: Add support delayed timer for polling modeChanwoo Choi3-1/+106
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <[email protected]> Reviewed-by: Lukasz Luba <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandleEnric Balletbo i Serra1-0/+2
The Rockchip DMC (Dynamic Memory Interface) needs to access to the PMU general register files to know the DRAM type, so add a phandle to the syscon that manages these registers. Signed-off-by: Enric Balletbo i Serra <[email protected]> Reviewed-by: Chanwoo Choi <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Gaël PORTAY <[email protected]> Acked-by: MyungJoo Ham <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: tegra: Add Dmitry as a maintainerDmitry Osipenko1-0/+9
I was contributing to the NVIDIA Tegra20+ devfreq drivers recently and want to help keep them working and evolving in the future. Acked-by: Chanwoo Choi <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: event: Fix trivial spellingKieran Bingham1-2/+2
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absentMarc Zyngier1-19/+23
Booting a recent kernel on a rk3399-based system (nanopc-t4), equipped with a recent u-boot and ATF results in an Oops due to a NULL pointer dereference. This turns out to be due to the rk3399-dmc driver looking for an *undocumented* property (rockchip,pmu), and happily using a NULL pointer when the property isn't there. Instead, make most of what was brought in with 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") conditioned on finding this property in the device-tree, preventing the driver from exploding. Cc: [email protected] Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-07-30mac80211: fix warning in 6 GHz IE addition in mesh modeRajkumar Manoharan2-0/+17
The commit 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") failed to check device capability before adding HE 6 GHz capability element. Below warning is reported in 11ac device in mesh. Fix that by checking device capability at HE 6 GHz cap IE addition in mesh beacon and association request. WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878 ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211] [ 3138.720358] Call Trace: [ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211] [ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211] [ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211] [ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211] Fixes: 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") Reported-by: Markus Theil <[email protected]> Signed-off-by: Rajkumar Manoharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30ALSA: hda/realtek - Fixed HP right speaker no soundKailang Yang1-1/+18
HP NB right speaker had no sound output. This platform was connected to I2S Amp for speaker out.(None Realtek I2S Amp IC) EC need to check codec GPIO1 pin to initial I2S Amp. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-07-29soc: qcom: geni: Fix unused label warningYueHaibing1-1/+1
If CONFIG_SERIAL_EARLYCON is not set, gcc warns this: drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe' drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label] exit: ^~~~ Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-07-30espintcp: count packets dropped in espintcp_rcvSabrina Dubroca1-0/+6
Currently, espintcp_rcv drops packets silently, which makes debugging issues difficult. Count packets as either XfrmInHdrError (when the packet was too short or contained invalid data) or XfrmInError (for other issues). Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-07-30espintcp: handle short messages instead of breaking the encap socketSabrina Dubroca1-1/+24
Currently, short messages (less than 4 bytes after the length header) will break the stream of messages. This is unnecessary, since we can still parse messages even if they're too short to contain any usable data. This is also bogus, as keepalive messages (a single 0xff byte), though not needed with TCP encapsulation, should be allowed. This patch changes the stream parser so that short messages are accepted and dropped in the kernel. Messages that contain a valid SPI or non-ESP header are processed as before. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Reported-by: Andrew Cagney <[email protected]> Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-07-29random32: remove net_rand_state from the latent entropy gcc pluginLinus Torvalds2-2/+2
It turns out that the plugin right now ends up being really unhappy about the change from 'static' to 'extern' storage that happened in commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity"). This is probably a trivial fix for the latent_entropy plugin, but for now, just remove net_rand_state from the list of things the plugin worries about. Reported-by: Stephen Rothwell <[email protected]> Cc: Emese Revfy <[email protected]> Cc: Kees Cook <[email protected]> Cc: Willy Tarreau <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-07-29PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock1-0/+13
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-07-30selftests/bpf: Extend map-in-map selftest to detect memory leaksAndrii Nakryiko1-14/+110
Add test validating that all inner maps are released properly after skeleton is destroyed. To ensure determinism, trigger kernel-side synchronize_rcu() before checking map existence by their IDs. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-30bpf: Fix map leak in HASH_OF_MAPS mapAndrii Nakryiko1-3/+9
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update() operation. This is due to per-cpu extra_elems optimization, which bypassed free_htab_elem() logic doing proper clean ups. Make sure that inner map is put properly in optimized case as well. Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-29ibmvnic: Fix IRQ mapping disposal in error pathThomas Falcon1-1/+1
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ error paths. Fix this and dispose of TX IRQ mappings correctly in case of an error. Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.