aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-29bcachefs: Fix failure to return error on misaligned dio writeKent Overstreet1-1/+3
This was reported as an error when running coreutils shred. Signed-off-by: Kent Overstreet <[email protected]>
2024-05-29clk: sifive: Do not register clkdevs for PRCI clocksSamuel Holland1-8/+0
These clkdevs were unnecessary, because systems using this driver always look up clocks using the devicetree. And as Russell King points out[1], since the provided device name was truncated, lookups via clkdev would never match. Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") caused clkdev registration to fail due to the truncation, and this now prevents the driver from probing. Fix the driver by removing the clkdev registration. Link: https://lore.kernel.org/linux-clk/[email protected]/ [1] Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block") Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") Reported-by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/linux-clk/[email protected]/ Suggested-by: Russell King <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2024-05-29selftests/overlayfs: Fix build error on ppc64Michael Ellerman1-0/+1
Fix build error on ppc64: dev_in_maps.c: In function ‘get_file_dev_and_inode’: dev_in_maps.c:60:59: error: format ‘%llu’ expects argument of type ‘long long unsigned int *’, but argument 7 has type ‘__u64 *’ {aka ‘long unsigned int *’} [-Werror=format=] By switching to unsigned long long for u64 for ppc64 builds. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29selftests/openat2: Fix build warnings on ppc64Michael Ellerman1-0/+1
Fix warnings like: openat2_test.c: In function ‘test_openat2_flags’: openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] By switching to unsigned long long for u64 for ppc64 builds. Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29selftests: cachestat: Fix build warnings on ppc64Michael Ellerman1-0/+1
Fix warnings like: test_cachestat.c: In function ‘print_cachestat’: test_cachestat.c:30:38: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 2 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] By switching to unsigned long long for u64 for ppc64 builds. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29tracing/selftests: Fix kprobe event name test for .isra. functionsSteven Rostedt (Google)1-1/+2
The kprobe_eventname.tc test checks if a function with .isra. can have a kprobe attached to it. It loops through the kallsyms file for all the functions that have the .isra. name, and checks if it exists in the available_filter_functions file, and if it does, it uses it to attach a kprobe to it. The issue is that kprobes can not attach to functions that are listed more than once in available_filter_functions. With the latest kernel, the function that is found is: rapl_event_update.isra.0 # grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions rapl_event_update.isra.0 rapl_event_update.isra.0 It is listed twice. This causes the attached kprobe to it to fail which in turn fails the test. Instead of just picking the function function that is found in available_filter_functions, pick the first one that is listed only once in available_filter_functions. Cc: [email protected] Fixes: 604e3548236d ("selftests/ftrace: Select an existing function in kprobe_eventname test") Signed-off-by: Steven Rostedt (Google) <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29selftests/ftrace: Update required configMasami Hiramatsu (Google)1-7/+19
Update required config options for running all tests. This also sorts the config entries alphabetically. Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29selftests/ftrace: Fix to check required event fileMasami Hiramatsu (Google)1-1/+1
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat` event for defining eprobe on it. Since this `syscalls` events depend on CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail. Add the event file to `required` line so that the test will return `unsupported` result. Fixes: 297e1dcdca3d ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes") Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29kselftest/alsa: Ensure _GNU_SOURCE is definedMark Brown1-1/+1
The pcmtest driver tests use the kselftest harness which requires that _GNU_SOURCE is defined but nothing causes it to be defined. Since the KHDR_INCLUDES Makefile variable has had the required define added let's use that, this should provide some futureproofing. Fixes: daef47b89efd ("selftests: Compile kselftest headers with -D_GNU_SOURCE") Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-05-29dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from exampleRob Herring (Arm)1-2/+1
"reg" is not documented nor used for st,mlahb, so drop it from the example to fix the warning: Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected) from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# Since "reg" is dropped, the unit-address must be as well. Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-05-29dt-bindings: arm: sunxi: Fix incorrect '-' usageRob Herring (Arm)1-3/+3
Commit 6bc6bf8a940a ("dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants") mistakenly added '-' on each line which created empty (i.e. description only) schemas matching anything. This causes validation to fail on all the root node compatibles as there are multiple oneOf clauses passing. Fixes: 6bc6bf8a940a ("dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants") Reviewed-by: Ryan Walklin <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-05-29spi: stm32: Don't warn about spurious interruptsUwe Kleine-König1-1/+1
The dev_warn to notify about a spurious interrupt was introduced with the reasoning that these are unexpected. However spurious interrupts tend to trigger continously and the error message on the serial console prevents that the core's detection of spurious interrupts kicks in (which disables the irq) and just floods the console. Fixes: c64e7efe46b7 ("spi: stm32: make spurious and overrun interrupts visible") Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-05-29ALSA: ump: Set default protocol when not given explicitlyTakashi Iwai1-0/+8
When an inquiry of the current protocol via UMP Stream Configuration message fails by some reason, we may leave the current protocol undefined, which may lead to unexpected behavior. Better to assume a valid protocol found in the protocol capability bits instead. For a device that doesn't support the UMP v1.2 feature, it won't reach to this code path, and USB MIDI GTB descriptor would be used for determining the protocol, instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-05-29ALSA: ump: Don't accept an invalid UMP protocol numberTakashi Iwai1-0/+7
When a UMP Stream Configuration message is received, the driver tries to switch the protocol, but there was no sanity check of the protocol, hence it can pass an invalid value. Add the check and bail out if a wrong value is passed. Fixes: a79807683781 ("ALSA: ump: Add helper to change MIDI protocol") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-05-29Revert "vfs: Delete the associated dentry when deleting a file"Linus Torvalds1-7/+8
This reverts commit 681ce8623567ba7e7333908e9826b77145312dda. We gave it a try, but it turns out the kernel test robot did in fact find performance regressions for it, so we'll have to look at the more involved alternative fixes for Yafang Shao's Elasticsearch load issue. There were several alternatives discussed, they just weren't as simple as this first attempt. The report is of a -7.4% regression of filebench.sum_operations/s, which appears significant enough to trigger my "this patch may get reverted if somebody finds a performance regression on some other load" rule. So it's still the case that we should end up deleting dentries more aggressively - or just be better at pruning them later - but it needs a bit more finesse than this simple thing. Link: https://lore.kernel.org/all/[email protected]/ Cc: Yafang Shao <[email protected]> Cc: Al Viro <[email protected]> Cc: Christian Brauner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-05-29Merge tag '9p-for-6.10-rc2' of https://github.com/martinetd/linuxLinus Torvalds2-2/+9
Pull 9p fixes from Dominique Martinet: "Two fixes headed to stable trees: - a trace event was dumping uninitialized values - a missing lock that was thought to have exclusive access, and it turned out not to" * tag '9p-for-6.10-rc2' of https://github.com/martinetd/linux: 9p: add missing locking around taking dentry fid list net/9p: fix uninit-value in p9_client_rpc()
2024-05-30dt-bindings: kbuild: Fix dt_binding_check on unconfigured buildRob Herring (Arm)1-1/+1
The 'dt_binding_check' target shouldn't depend on the kernel configuration, but it has since commit 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json"). That is because CHECK_DT_BINDING make variable was dropped, but scripts/dtc/Makefile was missed. The CHECK_DTBS variable can be used instead. Reported-by: Francesco Dolcini <[email protected]> Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json") Signed-off-by: "Rob Herring (Arm)" <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-05-30kheaders: use `command -v` to test for existence of `cpio`Miguel Ojeda1-1/+6
Commit 13e1df09284d ("kheaders: explicitly validate existence of cpio command") added an explicit check for `cpio` using `type`. However, `type` in `dash` (which is used in some popular distributions and base images as the shell script runner) prints the missing message to standard output, and thus no error is printed: $ bash -c 'type missing >/dev/null' bash: line 1: type: missing: not found $ dash -c 'type missing >/dev/null' $ For instance, this issue may be seen by loongarch builders, given its defconfig enables CONFIG_IKHEADERS since commit 9cc1df421f00 ("LoongArch: Update Loongson-3 default config file"). Therefore, use `command -v` instead to have consistent behavior, and take the chance to provide a more explicit error. Fixes: 13e1df09284d ("kheaders: explicitly validate existence of cpio command") Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-05-30kheaders: explicitly define file modes for archived headersMatthias Maennich1-1/+1
Build environments might be running with different umask settings resulting in indeterministic file modes for the files contained in kheaders.tar.xz. The file itself is served with 444, i.e. world readable. Archive the files explicitly with 744,a+X to improve reproducibility across build environments. --mode=0444 is not suitable as directories need to be executable. Also, 444 makes it hard to delete all the readonly files after extraction. Cc: [email protected] Signed-off-by: Matthias Maennich <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-05-29Merge tag 'v6.10-p3' of ↵Linus Torvalds1-43/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a new run-time warning triggered by tpm" * tag 'v6.10-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: core - Remove add_early_randomness
2024-05-29io_uring: don't attempt to mmap larger than what the user asks forJens Axboe1-2/+3
If IORING_FEAT_SINGLE_MMAP is ignored, as can happen if an application uses an ancient liburing or does setup manually, then 3 mmap's are required to map the ring into userspace. The kernel will still have collapsed the mappings, however userspace may ask for mapping them individually. If so, then we should not use the full number of ring pages, as it may exceed the partial mapping. Doing so will yield an -EFAULT from vm_insert_pages(), as we pass in more pages than what the application asked for. Cap the number of pages to match what the application asked for, for the particular mapping operation. Reported-by: Lucas Mülling <[email protected]> Link: https://github.com/axboe/liburing/issues/1157 Fixes: 3ab1db3c6039 ("io_uring: get rid of remap_pfn_range() for mapping rings/sqes") Signed-off-by: Jens Axboe <[email protected]>
2024-05-29spi: Assign dummy scatterlist to unidirectional transfersAndy Shevchenko1-0/+9
Commit 8cc3bad9d9d6 ("spi: Remove unneded check for orig_nents") introduced a regression: unmapped data could now be passed to the DMA APIs, resulting in null pointer dereferences. Commit 9f788ba457b4 ("spi: Don't mark message DMA mapped when no transfer in it is") and commit da560097c056 ("spi: Check if transfer is mapped before calling DMA sync APIs") addressed the problem, but only partially. Unidirectional transactions will still result in null pointer dereference. To prevent that from happening, assign a dummy scatterlist when no data is mapped, so that the DMA API can be called and not result in a null pointer dereference. Signed-off-by: Andy Shevchenko <[email protected]> Reported-by: Neil Armstrong <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Reported-by: Nícolas F. R. A. Prado <[email protected]> Closes: https://lore.kernel.org/all/d3679496-2e4e-4a7c-97ed-f193bd53af1d@notapiano Closes: https://lore.kernel.org/all/4748499f-789c-45a8-b50a-2dd09f4bac8c@notapiano Fixes: 8cc3bad9d9d6 ("spi: Remove unneded check for orig_nents") Tested-by: Nícolas F. R. A. Prado <[email protected]> [nfraprado: wrote the commit message] Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-05-29ASoC: SOF: add missing MODULE_DESCRIPTIONMark Brown44-33/+45
Merge series from Pierre-Louis Bossart <[email protected]>: 'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset cleans-up all the module definitions and adds MODULE_DESCRIPTION lines as needed.
2024-05-29wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()Dmitry Antipov1-4/+10
When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...> Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'. Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well. Signed-off-by: Dmitry Antipov <[email protected]> Link: https://msgid.link/[email protected] [improve (imho) indentation a bit] Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: correctly parse Spatial Reuse Parameter Set elementLingbo Kong1-2/+8
Currently, the way of parsing Spatial Reuse Parameter Set element is incorrect and some members of struct ieee80211_he_obss_pd are not assigned. To address this issue, it must be parsed in the order of the elements of Spatial Reuse Parameter Set defined in the IEEE Std 802.11ax specification. The diagram of the Spatial Reuse Parameter Set element (IEEE Std 802.11ax -2021-9.4.2.252). ------------------------------------------------------------------------- | | | | |Non-SRG| SRG | SRG | SRG | SRG | |Element|Length| Element | SR |OBSS PD|OBSS PD|OBSS PD| BSS |Partial| | ID | | ID |Control| Max | Min | Max |Color | BSSID | | | |Extension| | Offset| Offset|Offset |Bitmap|Bitmap | ------------------------------------------------------------------------- Fixes: 1ced169cc1c2 ("mac80211: allow setting spatial reuse parameters from bss_conf") Signed-off-by: Lingbo Kong <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: fix Spatial Reuse element size checkLingbo Kong1-1/+1
Currently, the way to check the size of Spatial Reuse IE data in the ieee80211_parse_extension_element() is incorrect. This is because the len variable in the ieee80211_parse_extension_element() function is equal to the size of Spatial Reuse IE data minus one and the value of returned by the ieee80211_he_spr_size() function is equal to the length of Spatial Reuse IE data. So the result of the len >= ieee80211_he_spr_size(data) statement always false. To address this issue and make it consistent with the logic used elsewhere with ieee80211_he_oper_size(), change the "len >= ieee80211_he_spr_size(data)" to “len >= ieee80211_he_spr_size(data) - 1”. Fixes: 9d0480a7c05b ("wifi: mac80211: move element parsing to a new file") Signed-off-by: Lingbo Kong <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach1-10/+0
In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer1-1/+2
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit1-2/+2
In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker1-1/+4
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg3-6/+11
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol1-2/+11
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg3-5/+47
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdefShahar S Matityahu1-1/+1
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu <[email protected]> Reviewed-by: Luciano Coelho <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein1-1/+4
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg1-7/+2
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <[email protected]> Reviewed-by: Liad Kaufman <[email protected]> Reviewed-by: Luciano Coelho <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol1-1/+2
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <[email protected]> Reviewed-by: Gregory Greenman <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: fix a crash on 7265Emmanuel Grumbach1-2/+2
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz3-1/+11
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit1-2/+0
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: pass proper link id for channel switch started notificationAditya Kumar Singh1-2/+2
Original changes[1] posted is having proper changes. However, at the same time, there was chandef puncturing changes which had a conflict with this. While applying, two errors crept in - a) Whitespace error. b) Link ID being passed to channel switch started notifier function is 0. However proper link ID is present in the function. Fix these now. [1] https://lore.kernel.org/all/[email protected]/ Fixes: 1a96bb4e8a79 ("wifi: mac80211: start and finalize channel switch on link basis") Signed-off-by: Aditya Kumar Singh <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: cfg80211: fix 6 GHz scan request buildingJohannes Berg2-17/+36
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: handle tasklet frames before stoppingJohannes Berg3-2/+12
The code itself doesn't want to handle frames from the driver if it's already stopped, but if the tasklet was queued before and runs after the stop, then all bets are off. Flush queues before actually stopping, RX should be off at this point since all the interfaces are removed already, etc. Reported-by: [email protected] Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: apply mcast rate only if interface is upJohannes Berg1-2/+3
If the interface isn't enabled, don't apply multicast rate changes immediately. Reported-by: [email protected] Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa79403c0c444d32d@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: cfg80211: pmsr: use correct nla_get_uX functionsLin Ma1-4/+4
The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Lin Ma <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: cfg80211: Lock wiphy in cfg80211_get_stationRemi Pommarel1-1/+6
Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by: Remi Pommarel <[email protected]> Reviewed-by: Nicolas Escande <[email protected]> Acked-by: Antonio Quartulli <[email protected]> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: cfg80211: fully move wiphy work to unbound workqueueJohannes Berg2-3/+3
Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: cfg80211: validate HE operation element parsingJohannes Berg1-1/+2
Validate that the HE operation element has the correct length before parsing it. Cc: [email protected] Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type") Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()Remi Pommarel1-2/+2
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. Fixes: 1d147bfa6429 ("mac80211: fix AP powersave TX vs. wakeup race") Signed-off-by: Remi Pommarel <[email protected]> Link: https://msgid.link/8e36fe07d0fbc146f89196cd47a53c8a0afe84aa.1716910344.git.repk@triplefau.lt Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdataNicolas Escande1-0/+1
With a ath9k device I can see that: iw phy phy0 interface add mesh0 type mp ip link set mesh0 up iw dev mesh0 scan Will start a scan with the Power Management bit set in the Frame Control Field. This is because we set this bit depending on the nonpeer_pm variable of the mesh iface sdata and when there are no active links on the interface it remains to NL80211_MESH_POWER_UNKNOWN. As soon as links starts to be established, it wil switch to NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta nonpeer_pm field. As we want no power save by default, (as expressed with the per sta ini values), lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE. Also please note that we cannot change the default value from userspace prior to establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan. Signed-off-by: Nicolas Escande <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.