| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
|
|
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
|
|
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c35e ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Tested-by: Peter Schneider <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <[email protected]>
Tested-by: Tanmay Shah <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
I'm tired of gmail breaking DKIM. Switch everything over to my
@kernel.org alias instead.
Signed-off-by: Kees Cook <[email protected]>
|
|
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02e8 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()")
Signed-off-by: Kees Cook <[email protected]>
Tested-by: Marco Patalano <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
When running fstest generic/423 with sfu mount option, it
was being skipped due to inability to create sockets:
generic/423 [not run] cifs does not support mknod/mkfifo
which can also be easily reproduced with their af_unix tool:
./src/af_unix /mnt1/socket-two bind: Operation not permitted
Fix sfu mount option to allow creating and reporting sockets.
Cc: [email protected]
Signed-off-by: Steve French <[email protected]>
|
|
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Cc: Günther Noack <[email protected]>
Cc: Paul Moore <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mickaël Salaün <[email protected]>
|
|
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
Cc: Günther Noack <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: [email protected]
Reported-by: [email protected]
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Closes: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
[mic: Fix commit message]
Signed-off-by: Mickaël Salaün <[email protected]>
|
|
Commit eb50d0f250e9 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250e9 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: [email protected]
Reported-by: Tim Teichmann <[email protected]>
Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/
Reviewed-by: Mika Westerberg <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: [email protected]
Reported-by: Doru Iorgulescu <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: [email protected]
Reported-by: Aarrayy <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
|
|
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66dfda ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda")
Signed-off-by: Simon Trimmer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The codec should be cleared when the amp driver is unbound and when
resuming it should be tested to prevent loading firmware into the device
and ALSA in a partially configured system state.
Signed-off-by: Simon Trimmer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
'gamma_curve_segment' looks like it has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Liviu Dudau <[email protected]>
|
|
The margin debugfs node controls the "Enable Margin Test" field of the
lane margining operations. This field selects between either low or high
voltage margin values for voltage margin test or left or right timing
margin values for timing margin test.
According to the USB4 specification, whether or not the "Enable Margin
Test" control applies, depends on the values of the "Independent
High/Low Voltage Margin" or "Independent Left/Right Timing Margin"
capability fields for voltage and timing margin tests respectively. The
pre-existing condition enabled the debugfs node also in the case where
both low/high or left/right margins are returned, which is incorrect.
This change only enables the debugfs node in question, if the specific
required capability values are met.
Signed-off-by: Aapo Vienamo <[email protected]>
Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining")
Cc: [email protected]
Signed-off-by: Mika Westerberg <[email protected]>
|
|
Commit:
7bc263840bc3 ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Signed-off-by: Phil Auld <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix the 'make W=1 C=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/intel/intel-uncore.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/intel/intel-cstate.o
Signed-off-by: Jeff Johnson <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do.
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Jan Beulich <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport (IBM) <[email protected]>
|
|
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
kvm_riscv_vcpu_set_reg_isa_ext function
In the function kvm_riscv_vcpu_set_reg_isa_ext, the original code
used incorrect reg_subtype labels KVM_REG_RISCV_SBI_MULTI_EN/DIS.
These have been corrected to KVM_REG_RISCV_ISA_MULTI_EN/DIS respectively.
Although they are numerically equivalent, the actual processing
will not result in errors, but it may lead to ambiguous code semantics.
Fixes: 613029442a4b ("RISC-V: KVM: Extend ONE_REG to enable/disable multiple ISA extensions")
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/ff1c6771a67d660db94372ac9aaa40f51e5e0090.1716429371.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <[email protected]>
|
|
When the maximum hart number within groups is 1, hart-index-bit is set to
0. Consequently, there is no need to restore the hart ID from IMSIC
addresses and hart-index-bit settings. Currently, QEMU and kvmtool do not
pass correct hart-index-bit values when the maximum hart number is a
power of 2, thereby avoiding this issue. Corresponding patches for QEMU
and kvmtool will also be dispatched.
Fixes: 89d01306e34d ("RISC-V: KVM: Implement device interface for AIA irqchip")
Signed-off-by: Yong-Xuan Wang <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- sw-sync: Don't interfere with IRQ handling
- Fix kthreads-handling error path
gem-shmem:
- Warn when trying to pin imported objects
lima:
- Fix dma_resv-related deadlock in object pin
msm:
- Remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- Fix dma_resv-related deadlock in object pin
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
attempts to revert the code change introduced by commit cd5ab1b0fcb4
("blk-throttle: add .low interface"). However, it leaves behind the
bps_conf[] and iops_conf[] fields in the throtl_grp structure which
aren't set anywhere in the new blk-throttle.c code but are still being
used by tg_prfill_limit() to display the limits in io.max. Now io.max
always displays the following values if a block queue is used:
<m>:<n> rbps=0 wbps=0 riops=0 wiops=0
Fix this problem by removing bps_conf[] and iops_conf[] and use bps[]
and iops[] instead to complete the revert.
Fixes: bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
Reported-by: Justin Forbes <[email protected]>
Closes: https://github.com/containers/podman/issues/22701#issuecomment-2120627789
Signed-off-by: Waiman Long <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Reviewed-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit d976c6f4b32c ("of: property: Add fw_devlink support for
interrupt-map property") tried to do what it says on the tin,
but failed on a couple of points:
- it confuses bytes and cells. Not a huge deal, except when it
comes to pointer arithmetic
- it doesn't really handle anything but interrupt-maps that have
their parent #address-cells set to 0
The combinations of the two leads to some serious fun on my M1
box, with plenty of WARN-ON() firing all over the shop, and
amusing values being generated for interrupt specifiers.
Having 2 versions of parsing code for "interrupt-map" was a bad
idea. Now that the common parsing parts have been refactored
into of_irq_parse_imap_parent(), rework the code here to use it
instead and fix the pointer arithmetic.
Note that the dependency will be a bit different than the original code
when the interrupt-map points to another interrupt-map. In this case,
the original code would resolve to the final interrupt controller. Now
the dependency is the parent interrupt-map (which itself should have a
dependency to the parent). It is possible that a node with an
interrupt-map has no driver.
Fixes: d976c6f4b32c ("of: property: Add fw_devlink support for interrupt-map property")
Signed-off-by: Marc Zyngier <[email protected]>
Co-developed-by: Rob Herring (Arm) <[email protected]>
Cc: Saravana Kannan <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
of_irq_parse_raw()
Factor out the parsing of interrupt-map interrupt parent phandle and its
arg cells to a separate function, of_irq_parse_imap_parent(), so that it
can be used in other parsing scenarios (e.g. fw_devlink).
There was a refcount leak on non-matching entries when iterating thru
"interrupt-map" which is fixed.
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
An error unrelated to ufshcd_try_to_abort_task is being logged and can
cause confusion. Modify ufshcd_mcq_abort() to print the result of the abort
failure. For readability, return immediately instead of 'goto'.
Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: Chanwoo Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-05-30:
amdgpu:
- RAS fix
- Fix colorspace property for MST connectors
- Fix for PCIe DPM
- Silence UBSAN warning
- GPUVM robustness fix
- Partition fix
- Drop deprecated I2C_CLASS_SPD
amdkfd:
- Revert unused changes for certain 11.0.3 devices
- Simplify APU VRAM handling
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- One pcode polling timeout change
- One fix for deadlocks for faulting VMs
- One error-path lock imbalance fix
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZlisNHzgoq9nVg6g@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.10-rc2:
- Fix a race in audio component by registering it later
- Make DPT object unshrinkable to avoid shrinking when framebuffer has
not shrunk
- Fix CCS id calculation to fix a perf regression
- Fix selftest caching mode
- Fix FIELD_PREP compiler warnings
- Fix indefinite wait for GT wakeref release
- Revert overeager multi-gt pm reference removal
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A zoned device may have a last sequential write required zone that is
smaller than other zones. However, all tests to check if a zone write
plug write offset exceeds the zone capacity use the same capacity
value stored in the gendisk zone_capacity field. This is incorrect for a
zoned device with a last runt (smaller) zone.
Add the new field last_zone_capacity to struct gendisk to store the
capacity of the last zone of the device. blk_revalidate_seq_zone() and
blk_revalidate_conv_zone() are both modified to get this value when
disk_zone_is_last() returns true. Similarly to zone_capacity, the value
is first stored using the last_zone_capacity field of struct
blk_revalidate_zone_args. Once zone revalidation of all zones is done,
this is used to set the gendisk last_zone_capacity field.
The checks to determine if a zone is full or if a sector offset in a
zone exceeds the zone capacity in disk_should_remove_zone_wplug(),
disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(),
and blk_zone_wplug_prepare_bio() are modified to use the new helper
functions disk_zone_is_full() and disk_zone_wplug_is_full().
disk_zone_is_full() uses the zone index to determine if the zone being
tested is the last one of the disk and uses the either the disk
zone_capacity or last_zone_capacity accordingly.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit ecfe43b11b02 ("block: Remember zone capacity when revalidating
zones") introduced checks to ensure that the capacity of the zones of
a zoned device is constant for all zones. However, this check ignores
the possibility that a zoned device has a smaller last zone with a size
not equal to the capacity of other zones. Such device correspond in
practice to an SMR drive with a smaller last zone and all zones with a
capacity equal to the zone size, leading to the last zone capacity being
different than the capacity of other zones.
Correctly handle such device by fixing the check for the constant zone
capacity in blk_revalidate_seq_zone() using the new helper function
disk_zone_is_last(). This helper function is also used in
blk_revalidate_zone_cb() when checking the zone size.
Fixes: ecfe43b11b02 ("block: Remember zone capacity when revalidating zones")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
dentry->d_fsdata is set to NFS_FSDATA_BLOCKED while unlinking or
renaming-over a file to ensure that no open succeeds while the NFS
operation progressed on the server.
Setting dentry->d_fsdata to NFS_FSDATA_BLOCKED is done under ->d_lock
after checking the refcount is not elevated. Any attempt to open the
file (through that name) will go through lookp_open() which will take
->d_lock while incrementing the refcount, we can be sure that once the
new value is set, __nfs_lookup_revalidate() *will* see the new value and
will block.
We don't have any locking guarantee that when we set ->d_fsdata to NULL,
the wait_var_event() in __nfs_lookup_revalidate() will notice.
wait/wake primitives do NOT provide barriers to guarantee order. We
must use smp_load_acquire() in wait_var_event() to ensure we look at an
up-to-date value, and must use smp_store_release() before wake_up_var().
This patch adds those barrier functions and factors out
block_revalidate() and unblock_revalidate() far clarity.
There is also a hypothetical bug in that if memory allocation fails
(which never happens in practice) we might leave ->d_fsdata locked.
This patch adds the missing call to unblock_revalidate().
Reported-and-tested-by: Richard Kojedzinszky <[email protected]>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1071501
Fixes: 3c59366c207e ("NFS: don't unhash dentry during unlink/rename")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
don't return 0 if snd_buf->len really greater than snd_buf->buflen
Signed-off-by: Chen Hanxiao <[email protected]>
Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Reviewed-by: Benjamin Coddington <[email protected]>
Reviewed-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
In commit 4ca9f31a2be66 ("NFSv4.1 test and add 4.1 trunking transport"),
we introduce the ability to query the NFS server for possible trunking
locations of the existing filesystem. However, we never checked the
returned file system path for these alternative locations. According
to the RFC, the server can say that the filesystem currently known
under "fs_root" of fs_location also resides under these server
locations under the following "rootpath" pathname. The client cannot
handle trunking a filesystem that reside under different location
under different paths other than what the main path is. This patch
enforces the check that fs_root path and rootpath path in fs_location
reply is the same.
Fixes: 4ca9f31a2be6 ("NFSv4.1 test and add 4.1 trunking transport")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
An attempt to open a file with a name longer than NFS3_MAXNAMLEN will
trigger a WARN_ON_ONCE in encode_filename3() because
nfs_atomic_open_v23() doesn't have the test on ->d_name.len that
nfs_atomic_open() has.
So add that test.
Reported-by: James Clark <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 7c6c5249f061 ("NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
syzbot reports that recv is using an uninitialized value:
=====================================================
BUG: KMSAN: uninit-value in io_req_cqe_overflow io_uring/io_uring.c:810 [inline]
BUG: KMSAN: uninit-value in io_req_complete_post io_uring/io_uring.c:937 [inline]
BUG: KMSAN: uninit-value in io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763
io_req_cqe_overflow io_uring/io_uring.c:810 [inline]
io_req_complete_post io_uring/io_uring.c:937 [inline]
io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763
io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860
io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597
io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651
ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was stored to memory at:
io_req_set_res io_uring/io_uring.h:215 [inline]
io_recv_finish+0xf10/0x1560 io_uring/net.c:861
io_recv+0x12ec/0x1ea0 io_uring/net.c:1175
io_issue_sqe+0x429/0x22c0 io_uring/io_uring.c:1751
io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860
io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597
io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651
ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
__do_kmalloc_node mm/slub.c:4038 [inline]
__kmalloc+0x6e4/0x1060 mm/slub.c:4052
kmalloc include/linux/slab.h:632 [inline]
io_alloc_async_data+0xc0/0x220 io_uring/io_uring.c:1662
io_msg_alloc_async io_uring/net.c:166 [inline]
io_recvmsg_prep_setup io_uring/net.c:725 [inline]
io_recvmsg_prep+0xbe8/0x1a20 io_uring/net.c:806
io_init_req io_uring/io_uring.c:2135 [inline]
io_submit_sqe io_uring/io_uring.c:2182 [inline]
io_submit_sqes+0x1135/0x2f10 io_uring/io_uring.c:2335
__do_sys_io_uring_enter io_uring/io_uring.c:3246 [inline]
__se_sys_io_uring_enter+0x40f/0x3c80 io_uring/io_uring.c:3183
__x64_sys_io_uring_enter+0x11f/0x1a0 io_uring/io_uring.c:3183
x64_sys_call+0x2c0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:427
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
which appears to be io_recv_finish() reading kmsg->msg.msg_inq to decide
if it needs to set IORING_CQE_F_SOCK_NONEMPTY or not. If the recv is
entered with buffer selection, but no buffer is available, then we jump
error path which calls io_recv_finish() without having assigned
kmsg->msg_inq. This might cause an errant setting of the NONEMPTY flag
for a request get gets errored with -ENOBUFS.
Reported-by: [email protected]
Fixes: 4a3223f7bfda ("io_uring/net: switch io_recv() to using io_async_msghdr")
Signed-off-by: Jens Axboe <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
Several serieses of fixes that have come in since the merge window,
mostly for Intel systems. The biggest thing is some updates from Peter
which fix support for a series of Intel laptops which have been found to
use 16 bit rather than 32 bit DMIC configuration blobs in their firmware
descriptions. We also have a bunch of fixes for module annotations, and
some smaller single patch fixes.
|
|
It's slightly better to set _GNU_SOURCE in the source code, but if one
must do it via the compiler invocation, then the best way to do so is
this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Since commit 5acf49119630 ("drm/msm: import gen_header.py script from Mesa"),
compilation is broken on machines having python versions older than 3.9
due to dependency on argparse.BooleanOptionalAction.
Switch to use simple bool for the validate flag to remove the dependency.
Fixes: 5acf49119630 ("drm/msm: import gen_header.py script from Mesa")
Signed-off-by: Abhinav Kumar <[email protected]>
Tested-by: Douglas Anderson <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The fully ordered versions of xchg[8|16]() using LR/SC lack the
necessary memory barriers to guarantee the order.
Fix this by matching what is already implemented in the fully ordered
versions of cmpxchg() using LR/SC.
Suggested-by: Andrea Parri <[email protected]>
Reported-by: Andrea Parri <[email protected]>
Closes: https://lore.kernel.org/linux-riscv/ZlYbupL5XgzgA0MX@andrea/T/#u
Fixes: a8ed2b7a2c13 ("riscv/cmpxchg: Implement xchg for variables of size 1 and 2")
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Andrea Parri <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
We're stuck supporting scalar misaligned loads in userspace because they
were part of the ISA at the time we froze the uABI. That wasn't the
case for vector misaligned accesses, so depending on them
unconditionally is a userspace bug. All extant vector hardware traps on
these misaligned accesses.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on
!XIP_KERNEL.
This also fixes a boot problem for XIP kernel introduced by the commit in
"Fixes:". This commit used huge page mapping for vmemmap, but huge page
vmap was not enabled for XIP kernel.
Fixes: ff172d4818ad ("riscv: Use hugepage mappings for vmemmap")
Signed-off-by: Nam Cao <[email protected]>
Cc: <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.
Similar issue has been fixed for the primary hart, see c7cdd96eca28
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context.
Fixes: 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting")
Fixes: 2875fe056156 ("RISC-V: Add cpu_ops and modify default booting method")
Signed-off-by: Sergey Matyukevich <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Now that we expose PAC to NV guests, we can also expose BTI (as
the two as joined at the hip, due to some of the PAC instructions
being landing pads).
While we're at it, also propagate CSV_frac, which requires no
particular emulation.
Fixes: f4f6a95bac49 ("KVM: arm64: nv: Advertise support for PAuth")
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|
|
ERETAx can fail in multiple ways:
(1) ELR_EL2 points lalaland
(2) we get a PAC failure
(3) SPSR_EL2 has the wrong mode
(1) is easy, as we just let the CPU do its thing and deliver an
Instruction Abort. However, (2) and (3) are interesting, because
the PAC failure priority is way below that of the Illegal Execution
State exception.
Which means that if we have detected a PAC failure (and that we have
FPACCOMBINE), we must be careful to give priority to the Illegal
Execution State exception, should one be pending.
Solving this involves hoisting the SPSR calculation earlier and
testing for the IL bit before injecting the FPAC exception.
In the extreme case of a ERETAx returning to an invalid mode *and*
failing its PAC check, we end up with an Instruction Abort (due
to the new PC being mangled by the failed Auth) *and* PSTATE.IL
being set. Which matches the requirements of the architecture.
Whilst we're at it, remove a stale comment that states the obvious
and only confuses the reader.
Fixes: 213b3d1ea161 ("KVM: arm64: nv: Handle ERETA[AB] instructions")
Reviewed-by: Joey Gouly <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|