| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's more useful to return the pointer to the string itself
with strreplace(), so it may be used like
attr->name = strreplace(name, '/', '_');
While at it, amend the kernel documentation.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Theoretically possible that "%pg" will take all room for the j_devname
and hence the "-%lu" will go outside the boundary due to unconditional
sprintf() in use. To make this code more robust, replace two sequential
s*printf():s by a single call and then replace forbidden character.
It's possible to do this way, because '/' won't ever be in the result
of "-%lu".
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fake flexible arrays have been deprecated since last millennium. Proper
C99 flexible arrays must be used throughout the kernel so
CONFIG_FORTIFY_SOURCE and CONFIG_UBSAN_BOUNDS can provide proper array
bounds checking.
Cc: Andy Whitcroft <[email protected]>
Cc: Dwaipayan Ray <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Fixed-by: Joe Perches <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Joe Perches <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With the addition of -fstrict-flex-arrays=3, struct sha256_state's
trailing array is no longer ignored by CONFIG_FORTIFY_SOURCE:
struct sha256_state {
u32 state[SHA256_DIGEST_SIZE / 4];
u64 count;
u8 buf[SHA256_BLOCK_SIZE];
};
This means that the memcpy() calls with "buf" as a destination in
sha256.c's code will attempt to perform run-time bounds checking, which
could lead to calling missing functions, specifically a potential
WARN_ONCE, which isn't callable from purgatory.
Reported-by: Thorsten Leemhuis <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Bisected-by: "Joan Bruguera Micó" <[email protected]>
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Cc: Paul Walmsley <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Alyssa Ross <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With the addition of -fstrict-flex-arrays=3, struct sha256_state's
trailing array is no longer ignored by CONFIG_FORTIFY_SOURCE:
struct sha256_state {
u32 state[SHA256_DIGEST_SIZE / 4];
u64 count;
u8 buf[SHA256_BLOCK_SIZE];
};
This means that the memcpy() calls with "buf" as a destination in
sha256.c's code will attempt to perform run-time bounds checking, which
could lead to calling missing functions, specifically a potential
WARN_ONCE, which isn't callable from purgatory.
Reported-by: Thorsten Leemhuis <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Bisected-by: "Joan Bruguera Micó" <[email protected]>
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Linux Kernel Functional Testing <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With the addition of -fstrict-flex-arrays=3, struct sha256_state's
trailing array is no longer ignored by CONFIG_FORTIFY_SOURCE:
struct sha256_state {
u32 state[SHA256_DIGEST_SIZE / 4];
u64 count;
u8 buf[SHA256_BLOCK_SIZE];
};
This means that the memcpy() calls with "buf" as a destination in
sha256.c's code will attempt to perform run-time bounds checking, which
could lead to calling missing functions, specifically a potential
WARN_ONCE, which isn't callable from purgatory.
Reported-by: Thorsten Leemhuis <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Bisected-by: "Joan Bruguera Micó" <[email protected]>
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: "H. Peter Anvin" <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: "Peter Zijlstra (Intel)" <[email protected]>
Cc: Alyssa Ross <[email protected]>
Cc: Sami Tolvanen <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Tested-by: Thorsten Leemhuis <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
struct acpi_table_slit is used for copying System Locality Information
Table data from ACPI tables. Here `entry` is a flex array but it was
using ancient 1-element fake flexible array, which has been deprecated.
Replace it with a C99 flexible array.
Signed-off-by: Wyes Karny <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Acked-by: John Stultz <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
lib/string.c is built with -ffreestanding, which prevents the compiler
from replacing certain functions with calls to their library versions.
On the other hand, this also prevents Clang and GCC from instrumenting
calls to memcpy() when building with KASAN, KCSAN or KMSAN:
- KASAN normally replaces memcpy() with __asan_memcpy() with the
additional cc-param,asan-kernel-mem-intrinsic-prefix=1;
- KCSAN and KMSAN replace memcpy() with __tsan_memcpy() and
__msan_memcpy() by default.
To let the tools catch memory accesses from strlcpy/strlcat, replace
the calls to memcpy() with __builtin_memcpy(), which KASAN, KCSAN and
KMSAN are able to replace even in -ffreestanding mode.
This preserves the behavior in normal builds (__builtin_memcpy() ends up
being replaced with memcpy()), and does not introduce new instrumentation
in unwanted places, as strlcpy/strlcat are already instrumented.
Suggested-by: Marco Elver <[email protected]>
Signed-off-by: Alexander Potapenko <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Most of the functions in ubsan that are only called from generated
code don't have a prototype, which W=1 builds warn about:
lib/ubsan.c:226:6: error: no previous prototype for '__ubsan_handle_divrem_overflow' [-Werror=missing-prototypes]
lib/ubsan.c:307:6: error: no previous prototype for '__ubsan_handle_type_mismatch' [-Werror=missing-prototypes]
lib/ubsan.c:321:6: error: no previous prototype for '__ubsan_handle_type_mismatch_v1' [-Werror=missing-prototypes]
lib/ubsan.c:335:6: error: no previous prototype for '__ubsan_handle_out_of_bounds' [-Werror=missing-prototypes]
lib/ubsan.c:352:6: error: no previous prototype for '__ubsan_handle_shift_out_of_bounds' [-Werror=missing-prototypes]
lib/ubsan.c:394:6: error: no previous prototype for '__ubsan_handle_builtin_unreachable' [-Werror=missing-prototypes]
lib/ubsan.c:404:6: error: no previous prototype for '__ubsan_handle_load_invalid_value' [-Werror=missing-prototypes]
Add prototypes for all of these to lib/ubsan.h, and remove the
one that was already present in ubsan.c.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Fangrui Song <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Warn about strcpy(), strncpy(), and strlcpy(). Suggest strscpy() and
include pointers to the open KSPP issues for each, which has further
details and replacement procedures.
Cc: Andy Whitcroft <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Dwaipayan Ray <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In an effort to annotate all flexible array members with their run-time
size information, the "element_count" attribute is being introduced by
Clang[1] and GCC[2] in future releases. This annotation will provide
the CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE features the ability
to perform run-time bounds checking on otherwise unknown-size flexible
arrays.
Even though the attribute is under development, we can start the
annotation process in the kernel. This requires defining a macro for
it, even if we have to change the name of the actual attribute later.
Since it is likely that this attribute may change its name to "counted_by"
in the future (to better align with a future total bytes "sized_by"
attribute), name the wrapper macro "__counted_by", which also reads more
clearly (and concisely) in structure definitions.
[1] https://reviews.llvm.org/D148381
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108896
Cc: Bill Wendling <[email protected]>
Cc: Qing Zhao <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Miguel Ojeda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning
for the autofs_dev_ioctl structure:
In function 'check_name',
inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9,
inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8:
fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
33 | if (!strchr(name, '/'))
| ^~~~~~~~~~~~~~~~~
In file included from include/linux/auto_dev-ioctl.h:10,
from fs/autofs/autofs_i.h:10,
from fs/autofs/dev-ioctl.c:14:
include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl':
include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0
112 | char path[0];
| ^~~~
This is easily fixed by changing the gnu 0-length array into a c99
flexible array. Since this is a uapi structure, we have to be careful
about possible regressions but this one should be fine as they are
equivalent here. While it would break building with ancient gcc versions
that predate c99, it helps building with --std=c99 and -Wpedantic builds
in user space, as well as non-gnu compilers. This means we probably
also want it fixed in stable kernels.
Cc: [email protected]
Cc: Kees Cook <[email protected]>
Cc: Gustavo A. R. Silva" <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The testing for ARRAY_BOUNDS just wants an uninstrumented array,
and the proper flexible array definition is fine for that.
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Bill Wendling <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated.
In an effort to remove strlcpy() completely, replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Replace old-style 1-element array of "dev" in struct stripe_head with
modern C99 flexible array. In the future, we can additionally annotate
it with the run-time size, found in the "disks" member.
Cc: Song Liu <[email protected]>
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
---
It looks like this memory calculation:
memory = conf->min_nr_stripes * (sizeof(struct stripe_head) +
max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
... was already buggy (i.e. it included the single "dev" bytes in the
result). However, I'm not entirely sure if that is the right analysis,
since "dev" is not related to struct bio nor PAGE_SIZE?
|
|
While struct_size() is normally used in situations where the structure
type already has a pointer instance, there are places where no variable
is available. In the past, this has been worked around by using a typed
NULL first argument, but this is a bit ugly. Add a helper to do this,
and replace the handful of instances of the code pattern with it.
Instances were found with this Coccinelle script:
@struct_size_t@
identifier STRUCT, MEMBER;
expression COUNT;
@@
- struct_size((struct STRUCT *)\(0\|NULL\),
+ struct_size_t(struct STRUCT,
MEMBER, COUNT)
Suggested-by: Christoph Hellwig <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: James Smart <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: HighPoint Linux Team <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumit Saxena <[email protected]>
Cc: Shivasharan S <[email protected]>
Cc: Don Brace <[email protected]>
Cc: "Darrick J. Wong" <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Guo Xuenan <[email protected]>
Cc: Gwan-gyeong Mun <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Daniel Latypov <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement with strlcpy is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Acked-by: Tyrel Datwyler <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
Check for strscpy()'s return value of -E2BIG on truncate for safe
replacement with strlcpy().
This is part of a tree-wide cleanup to remove the strlcpy() function
entirely from the kernel [2].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The -fstrict-flex-arrays=3 option is now available with the release
of GCC 13[1] and Clang 16[2]. This feature instructs the compiler to
treat only C99 flexible arrays as dynamically sized for the purposes of
object size calculations. In other words, the ancient practice of using
1-element arrays, or the GNU extension of using 0-sized arrays, as a
dynamically sized array is disabled. This allows CONFIG_UBSAN_BOUNDS,
CONFIG_FORTIFY_SOURCE, and other object-size aware features to behave
unambiguously in the face of trailing arrays: only C99 flexible arrays
are considered to be dynamically sized. For yet more detail, see:
https://people.kernel.org/kees/bounded-flexible-arrays-in-c
Enabling this will help track down any outstanding cases of fake
flexible arrays that need attention in kernel code.
[1] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html#index-fstrict-flex-arrays
[2] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-fstrict-flex-arrays
Cc: Masahiro Yamada <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: [email protected]
Co-developed-by: "Gustavo A. R. Silva" <[email protected]>
Signed-off-by: "Gustavo A. R. Silva" <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
-fsanitize-undefined-trap-on-error has been supported since GCC 5.1 and
Clang 3.2. The minimum supported version of these according to
Documentation/process/changes.rst is 5.1 and 11.0.0 respectively. Drop
this cc-option check.
Signed-off-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the definition of fortified strcat() to after strlcat() to use it
for bounds checking.
Signed-off-by: Kees Cook <[email protected]>
|
|
The definition of strcat() was defined in terms of unfortified strlcat(),
but that meant there was no bounds checking done on the internal strlen()
calls, and the (bounded) copy would be performed before reporting a
failure. Additionally, pathological cases (i.e. unterminated destination
buffer) did not make calls to fortify_panic(), which will make future unit
testing more difficult. Instead, explicitly define a fortified strlcat()
wrapper for strcat() to use.
Signed-off-by: Kees Cook <[email protected]>
|
|
The sizes reported by __member_size should never change in a given
function. Mark them as such.
Suggested-by: Miguel Ojeda <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add tests to make sure the strcat() family of functions behave
correctly.
Signed-off-by: Kees Cook <[email protected]>
|
|
In order for CI systems to notice all the skipped tests related to
CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build
with or without CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <[email protected]>
|
|
Since commit ba38961a069b ("um: Enable FORTIFY_SOURCE"), it's possible
to run the FORTIFY tests under UML. Enable CONFIG_FORTIFY_SOURCE when
running with --alltests to gain additional coverage, and by default under
UML.
Signed-off-by: Kees Cook <[email protected]>
|
|
Fix typo in the strscpy() docstring where q and p were flipped.
Signed-off-by: Arne Welzel <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The use of -fsanitize=bounds on GCC will ignore some trailing arrays,
leaving a gap in coverage. Switch to using -fsanitize=bounds-strict to
match Clang's stricter behavior.
Cc: Marco Elver <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Miroslav Benes <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
- Include reboot.h to avoid gcc-12 compiler warning
* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
parisc: kexec: include reboot.h
|
|
Pull ARM fixes from Russell King:
- fix unwinder for uleb128 case
- fix kernel-doc warnings for HP Jornada 7xx
- fix unbalanced stack on vfp success path
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
ARM: 9295/1: unwind:fix unwind abort for uleb128 case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
|