aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-23net: ipa: fix interconnect enable bugAlex Elder1-2/+2
When the core clock rate and interconnect bandwidth specifications were moved into configuration data, a copy/paste bug was introduced, causing the memory interconnect bandwidth to be set three times rather than enabling the three different interconnects. Fix this bug. Fixes: 91d02f9551501 ("net: ipa: use config data for clocking") Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Georgi Djakov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-23virtio_net: Fix recursive call to cpus_read_lock()Jeff Dike1-5/+7
virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by: Jeff Dike <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22Merge tag 'wireless-drivers-2020-12-22' of ↵Jakub Kicinski15-37/+118
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22qede: fix offload for IPIP tunnel packetsManish Chopra1-0/+5
IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22docs: netdev-FAQ: fix question headers formattingBaruch Siach1-67/+59
Join adjacent questions to a single question line. This fixes the formatting of questions that were not part of the heading. Also, drop Q: and A: prefixes. We don't need them now that questions and answers are visually separated. Signed-off-by: Baruch Siach <[email protected]> Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu1-1/+1
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22ibmvnic: fix login buffer memory leakLijun Pan1-0/+3
Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Lijun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22MAINTAINERS: remove names from mailing list maintainersJakub Kicinski1-12/+12
When searching for inactive maintainers it's useful to filter out mailing list addresses. Such "maintainers" will obviously never feature in a "From:" line of an email or a review tag. Since "L:" entries only provide the address of a mailing list without a fancy name extend this pattern to "M:" entries. Alternatively we could reserve M: entries for humans only and move the fake "maintainers" to L:. While I'd personally prefer to reserve M: for humans only, I'm not 100% that's a great choice either, given most L: entries are in fact open mailing lists with public archives. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22net: stmmac: dwmac-meson8b: ignore the second clock inputMartin Blumenstingl1-1/+1
The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock inputs: - Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to both inputs) - GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2 All known vendor kernels and u-boots are using the first input only. We let the common clock framework automatically choose the "right" parent. For some boards this causes a problem though, specificially with G12A and newer SoCs. The clock input is used for generating the 125MHz RGMII TX clock. For the two input clocks this means on G12A: - FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz - MPLL2: 499999993Hz / 4 = 124999998.25Hz In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz closer to the requested frequency than FCLK_DIV2. In reality however there is a resource conflict because MPLL2 is needed to generate some of the audio clocks. dwmac-meson8b probes first and sets up the clock tree with MPLL2. This works fine until the audio driver comes and "steals" the MPLL2 clocks and configures it with it's own rate (294909637Hz). The common clock framework happily changes the MPLL2 rate but does not reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz, which is more than 40% off the requested 125MHz. Don't use the second clock input for now to force the common clock framework to always select the first parent. This mimics the behavior from the vendor driver and fixes the clock resource conflict with the audio driver on G12A boards. Once the common clock framework can handle this situation this change can be reverted again. Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Reported-by: Thomas Graichen <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> Tested-by: thomas graichen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21net: mvpp2: Fix GoP port 3 Networking Complex Control configurationsStefan Chulski1-1/+1
During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Acked-by: Marcin Wojtas <[email protected]> Signed-off-by: Stefan Chulski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21ppp: Fix PPPIOCUNBRIDGECHAN request numberGuillaume Nault1-1/+1
PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in practice, but let's keep the logical decreasing assignment scheme. Fixes: 4cf476ced45d ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Signed-off-by: Guillaume Nault <[email protected]> Link: https://lore.kernel.org/r/e3a4c355e3820331d8e1fffef8522739aae58b57.1608380117.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21atm: idt77252: call pci_disable_device() on error pathDan Carpenter1-1/+1
This error path needs to disable the pci device before returning. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21ionic: account for vlan tag len in rx buffer lenShannon Nelson1-1/+1
Let the FW know we have enough receive buffer space for the vlan tag if it isn't stripped. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21Merge branch 'ucc_geth-fixes'Jakub Kicinski2-2/+10
Rasmus Villemoes says: ==================== ucc_geth fixes This is three bug fixes that fell out of a series of cleanups of the ucc_geth driver. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()Rasmus Villemoes1-1/+1
ugeth is the netdiv_priv() part of the netdevice. Accessing the memory pointed to by ugeth (such as done by ucc_geth_memclean() and the two of_node_puts) after free_netdev() is thus use-after-free. Fixes: 80a9fad8e89a ("ucc_geth: fix module removal") Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes1-1/+8
Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21ethernet: ucc_geth: set dev->max_mtu to 1518Rasmus Villemoes1-0/+1
All the buffers and registers are already set up appropriately for an MTU slightly above 1500, so we just need to expose this to the networking stack. AFAICT, there's no need to implement .ndo_change_mtu when the receive buffers are always set up to support the max_mtu. This fixes several warnings during boot on our mpc8309-board with an embedded mv88e6250 switch: mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0 ... mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4 ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead The last line explains what the DSA stack tries to do: achieving an MTU of 1500 on-the-wire requires that the master netdevice connected to the CPU port supports an MTU of 1500+the tagging overhead. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-21net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZEFlorian Fainelli1-0/+1
The driver is already allocating receive buffers of 2KiB and the Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-22bpf: Add schedule point in htab_init_buckets()Eric Dumazet1-0/+1
We noticed that with a LOCKDEP enabled kernel, allocating a hash table with 65536 buckets would use more than 60ms. htab_init_buckets() runs from process context, it is safe to schedule to avoid latency spikes. Fixes: c50eb518e262 ("bpf: Use separate lockdep class for each hashtab") Reported-by: John Sperbeck <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-21MAINTAINERS: switch to different email addressArend van Spriel1-1/+1
Switching to private mail account as work email is polluted with a legal disclaimer. Just making it extra clear by changing the email address in the MAINTAINERS file as well. Signed-off-by: Arend van Spriel <[email protected]> Signed-off-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-20mt76: mt7915: fix MESH ifdef blockRandy Dunlap1-2/+2
Fix a build error when CONFIG_MAC80211_MESH is not enabled: ../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token }, { ^ Fixes: af901eb4ab80 ("mt76: mt7915: get rid of dbdc debugfs knob") Signed-off-by: Randy Dunlap <[email protected]> Cc: Shayne Chen <[email protected]> Cc: Ryder Lee <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Cc: Felix Fietkau <[email protected]> Cc: [email protected] Cc: Kalle Valo <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-20mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queueLorenzo Bianconi1-1/+5
Fix a possible NULL pointer dereference in mt76s_process_tx_queue that can occur if status thread runs before allocating tx queues Fixes: 6a618acb7e62 ("mt76: sdio: convert {status/net}_work to mt76_worker") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org
2020-12-20mt76: sdio: remove wake logic in mt76s_process_tx_queueLorenzo Bianconi1-12/+3
Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue routine. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake"), the wake queue logic on the sdio status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org
2020-12-20mt76: usb: remove wake logic in mt76u_status_workerLorenzo Bianconi1-7/+0
Similar to mmio code path, remove wake logic in mt76u_status_worker handler. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake")', the wake queue logic on the usb status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org
2020-12-20Merge ath-current from ↵Kalle Valo10-12/+101
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 5.11. Major changes: ath11k * add null check for skb allocation * fix crash found during connect/disconnect stress testing * fix for HT disabled case * brown paperbag fixes for my bugs in suspend code * fix an unnecessary qmi allocation during firmware bootup * disable ASPM during firmware bootup to avoid issues
2020-12-19net: mvpp2: prs: fix PPPoE with ipv6 packet parseStefan Chulski1-2/+3
Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <[email protected]> Signed-off-by: Stefan Chulski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-19net: mvpp2: Add TCAM entry to drop flow control pause framesStefan Chulski2-1/+34
Issue: Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC. Fix: According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01. Add TCAM parser entry to track and drop pause frames by destination MAC. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-19net: mvpp2: disable force link UP during port init procedureStefan Chulski1-1/+13
Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <[email protected]> Acked-by: Marcin Wojtas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski5-29/+23
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Incorrect loop in error path of nft_set_elem_expr_clone(), from Colin Ian King. 2) Missing xt_table_get_private_protected() to access table private data in x_tables, from Subash Abhinov Kasiviswanathan. 3) Possible oops in ipset hash type resize, from Vasily Averin. 4) Fix shift-out-of-bounds in ipset hash type, also from Vasily. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: ipset: fix shift-out-of-bounds in htable_bits() netfilter: ipset: fixes possible oops in mtype_resize netfilter: x_tables: Update remaining dereference to RCU netfilter: nftables: fix incorrect increment of loop counter ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-18net/sched: sch_taprio: ensure to reset/destroy all child qdiscsDavide Caratti1-3/+4
taprio_graft() can insert a NULL element in the array of child qdiscs. As a consquence, taprio_reset() might not reset child qdiscs completely, and taprio_destroy() might leak resources. Fix it by ensuring that loops that iterate over q->qdiscs[] don't end when they find the first NULL item. Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-18Merge branch '40GbE' of ↵Jakub Kicinski4-5/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-17 Sylwester fixes an issue where PF was not properly being rebuilt following VF removal for i40e. Jakub Kicinski fixes a double release of rtnl_lock on iavf_lan_add_device() error for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix double-release of rtnl_lock i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-18net: af_packet: fix procfs header for 64-bit pointersBaruch Siach1-1/+3
On 64-bit systems the packet procfs header field names following 'sk' are not aligned correctly: sk RefCnt Type Proto Iface R Rmem User Inode 00000000605d2c64 3 3 0003 7 1 450880 0 16643 00000000080e9b80 2 2 0000 0 0 0 0 17404 00000000b23b8a00 2 2 0000 0 0 0 0 17421 ... With this change field names are correctly aligned: sk RefCnt Type Proto Iface R Rmem User Inode 000000005c3b1d97 3 3 0003 7 1 21568 0 16178 000000007be55bb7 3 3 fbce 8 1 0 0 16250 00000000be62127d 3 3 fbcd 8 1 0 0 16254 ... Signed-off-by: Baruch Siach <[email protected]> Link: https://lore.kernel.org/r/54917251d8433735d9a24e935a6cb8eb88b4058a.1608103684.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-18bpf: Remove unused including <linux/version.h>Tian Tao1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Tian Tao <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-18selftests/bpf: Fix spelling mistake "tranmission" -> "transmission"Colin Ian King1-2/+2
There are two spelling mistakes in output messages. Fix these. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-18xsk: Rollback reservation at NETDEV_TX_BUSYMagnus Karlsson2-0/+8
Rollback the reservation in the completion ring when we get a NETDEV_TX_BUSY. When this error is received from the driver, we are supposed to let the user application retry the transmit again. And in order to do this, we need to roll back the failed send so it can be retried. Unfortunately, we did not cancel the reservation we had made in the completion ring. By not doing this, we actually make the completion ring one entry smaller per NETDEV_TX_BUSY error we get, and after enough of these errors the completion ring will be of size zero and transmit will stop working. Fix this by cancelling the reservation when we get a NETDEV_TX_BUSY error. Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY") Reported-by: Xuan Zhuo <[email protected]> Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-18xsk: Fix race in SKB mode transmit with shared cqMagnus Karlsson4-7/+12
Fix a race when multiple sockets are simultaneously calling sendto() when the completion ring is shared in the SKB case. This is the case when you share the same netdev and queue id through the XDP_SHARED_UMEM bind flag. The problem is that multiple processes can be in xsk_generic_xmit() and call the backpressure mechanism in xskq_prod_reserve(xs->pool->cq). As this is a shared resource in this specific scenario, a race might occur since the rings are single-producer single-consumer. Fix this by moving the tx_completion_lock from the socket to the pool as the pool is shared between the sockets that share the completion ring. (The pool is not shared when this is not the case.) And then protect the accesses to xskq_prod_reserve() with this lock. The tx_completion_lock is renamed cq_lock to better reflect that it protects accesses to the potentially shared completion ring. Fixes: 35fcde7f8deb ("xsk: support for Tx") Reported-by: Xuan Zhuo <[email protected]> Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-18ath11k: pci: disable ASPM L0sLs before downloading firmwareCarl Huang2-0/+38
Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-18ath11k: qmi: try to allocate a big block of DMA memory firstCarl Huang2-2/+23
Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-17iavf: fix double-release of rtnl_lockJakub Kicinski1-3/+1
This code does not jump to exit on an error in iavf_lan_add_device(), so the rtnl_unlock() from the normal path will follow. Fixes: b66c7bc1cd4d ("iavf: Refactor init state machine") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-12-17xsk: Fix memory leak for failed bindMagnus Karlsson2-2/+4
Fix a possible memory leak when a bind of an AF_XDP socket fails. When the fill and completion rings are created, they are tied to the socket. But when the buffer pool is later created at bind time, the ownership of these two rings are transferred to the buffer pool as they might be shared between sockets (and the buffer pool cannot be created until we know what we are binding to). So, before the buffer pool is created, these two rings are cleaned up with the socket, and after they have been transferred they are cleaned up together with the buffer pool. The problem is that ownership was transferred before it was absolutely certain that the buffer pool could be created and initialized correctly and when one of these errors occurred, the fill and completion rings did neither belong to the socket nor the pool and where therefore leaked. Solve this by moving the ownership transfer to the point where the buffer pool has been completely set up and there is no way it can fail. Fixes: 7361f9c3d719 ("xsk: Move fill and completion rings to buffer pool") Reported-by: [email protected] Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-17Merge tag 'net-5.11-rc1' of ↵Linus Torvalds36-158/+198
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ...
2020-12-17Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds17-3/+903
Pull OpenRISC updates from Stafford Horne: - New drivers and OpenRISC support for the LiteX platform - A bug fix to support userspace gdb debugging - Fixes one compile issue with blk-iocost * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: add local64.h to fix blk-iocost build openrisc: fix trap for debugger breakpoint signalling openrisc: add support for LiteX drivers/tty/serial: add LiteUART driver dt-bindings: serial: document LiteUART bindings drivers/soc/litex: add LiteX SoC Controller driver dt-bindings: soc: document LiteX SoC Controller bindings dt-bindings: vendor: add vendor prefix for LiteX
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds258-4965/+6011
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
2020-12-17Merge tag 'trace-v5.11' of ↵Linus Torvalds57-415/+1140
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major update to this release is that there's a new arch config option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it. All the ftrace callbacks now take a struct ftrace_regs instead of a struct pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will have enough information to read the arguments of the function being traced, as well as access to the stack pointer. This way, if a user (like live kernel patching) only cares about the arguments, then it can avoid using the heavier weight "regs" callback, that puts in enough information in the struct ftrace_regs to simulate a breakpoint exception (needed for kprobes). A new config option that audits the timestamps of the ftrace ring buffer at most every event recorded. Ftrace recursion protection has been cleaned up to move the protection to the callback itself (this saves on an extra function call for those callbacks). Perf now handles its own RCU protection and does not depend on ftrace to do it for it (saving on that extra function call). New debug option to add "recursed_functions" file to tracefs that lists all the places that triggered the recursion protection of the function tracer. This will show where things need to be fixed as recursion slows down the function tracer. The eval enum mapping updates done at boot up are now offloaded to a work queue, as it caused a noticeable pause on slow embedded boards. Various clean ups and last minute fixes" * tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Offload eval map updates to a work queue Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS" ring-buffer: Add rb_check_bpage in __rb_allocate_pages ring-buffer: Fix two typos in comments tracing: Drop unneeded assignment in ring_buffer_resize() tracing: Disable ftrace selftests when any tracer is running seq_buf: Avoid type mismatch for seq_buf_init ring-buffer: Fix a typo in function description ring-buffer: Remove obsolete rb_event_is_commit() ring-buffer: Add test to validate the time stamp deltas ftrace/documentation: Fix RST C code blocks tracing: Clean up after filter logic rewriting tracing: Remove the useless value assignment in test_create_synth_event() livepatch: Use the default ftrace_ops instead of REGS when ARGS is available ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs MAINTAINERS: assign ./fs/tracefs to TRACING tracing: Fix some typos in comments ftrace: Remove unused varible 'ret' ring-buffer: Add recording of ring buffer recursion into recursed_functions ...
2020-12-17Merge tag 'modules-for-v5.11' of ↵Linus Torvalds5-110/+142
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 5.11 merge window: - Fix a race condition between systemd/udev and the module loader. The module loader was sending a uevent before the module was fully initialized (i.e., before its init function has been called). This means udev can start processing the module uevent before the module has finished initializing, and some udev rules expect that the module has initialized already upon receiving the uevent. This resulted in some systemd mount units failing if udev processes the event faster than the module can finish init. This is fixed by delaying the uevent until after the module has called its init routine. - Make the linker array sections for kernel params and module version attributes more robust by switching to use the alignment of the type in question. Namely, linker section arrays will be constructed using the alignment required by the struct (using __alignof__()) as opposed to a specific value such as sizeof(void *) or sizeof(long). This is less likely to cause breakages should the size of the type ever change (Johan Hovold) - Fix module state inconsistency by setting it back to GOING when a module fails to load and is on its way out (Miroslav Benes) - Some comment and code cleanups (Sergey Shtylyov)" * tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: delay kobject uevent until after module init call module: drop semicolon from version macro init: use type alignment for kernel parameters params: clean up module-param macros params: use type alignment for kernel parameters params: drop redundant "unused" attributes module: simplify version-attribute handling module: drop version-attribute alignment module: fix comment style module: add more 'kernel-doc' comments module: fix up 'kernel-doc' comments module: only handle errors with the *switch* statement in module_sig_check() module: avoid *goto*s in module_sig_check() module: merge repetitive strings in module_sig_check() module: set MODULE_STATE_GOING state when a module fails to load
2020-12-17i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFsSylwester Dziedziuch3-2/+15
When removing VFs for PF added to bridge there was an error I40E_AQ_RC_EINVAL. It was caused by not properly resetting and reinitializing PF when adding/removing VFs. Changed how reset is performed when adding/removing VFs to properly reinitialize PFs VSI. Fixes: fc60861e9b00 ("i40e: start up in VEPA mode by default") Signed-off-by: Sylwester Dziedziuch <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-12-17Merge tag 'dmaengine-5.11-rc1' of ↵Linus Torvalds70-559/+7708
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...
2020-12-17Merge tag 'mailbox-v5.11' of ↵Linus Torvalds8-11/+1391
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - arm: added mhu-v2 controller driver - arm_mhu_db: fix kfree by using devm_ variant - stm32-ipcc: misc cleanup * tag 'mailbox-v5.11' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: arm_mhuv2: Add driver dt-bindings: mailbox : arm,mhuv2: Add bindings mailbox: stm32-ipcc: cast void pointers to unsigned long mailbox: stm32-ipcc: remove duplicate error message mailbox: stm32-ipcc: add COMPILE_TEST dependency mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree
2020-12-17Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds41-1244/+1952
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv3: Add emulation of lookupp() to improve open_by_filehandle() support - A series of patches to improve readdir performance, particularly with large directories - Basic support for using NFS/RDMA with the pNFS files and flexfiles drivers - Micro-optimisations for RDMA - RDMA tracing improvements Bugfixes: - Fix a long standing bug with xs_read_xdr_buf() when receiving partial pages (Dan Aloni) - Various fixes for getxattr and listxattr, when used over non-TCP transports - Fixes for containerised NFS from Sargun Dhillon - switch nfsiod to be an UNBOUND workqueue (Neil Brown) - READDIR should not ask for security label information if there is no LSM policy (Olga Kornievskaia) - Avoid using interval-based rebinding with TCP in lockd (Calum Mackay) - A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code - A couple of fixes for pnfs/flexfiles read failover Cleanups: - Various cleanups for the SUNRPC xdr code in conjunction with the READ_PLUS fixes" * tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits) NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read() pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read NFSv4/pnfs: Add tracing for the deviceid cache fs/lockd: convert comma to semicolon NFSv4.2: fix error return on memory allocation failure NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer NFSv4.2: decode_read_plus_hole() needs to check the extent offset NFSv4.2: decode_read_plus_data() must skip padding after data segment NFSv4.2: Ensure we always reset the result->count in decode_read_plus() SUNRPC: When expanding the buffer, we may need grow the sparse pages SUNRPC: Cleanup - constify a number of xdr_buf helpers SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field SUNRPC: _copy_to/from_pages() now check for zero length SUNRPC: Cleanup xdr_shrink_bufhead() SUNRPC: Fix xdr_expand_hole() SUNRPC: Fixes for xdr_align_data() SUNRPC: _shift_data_left/right_pages should check the shift length ...
2020-12-17Merge tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds41-2192/+7224
Pull ceph updates from Ilya Dryomov: "The big ticket item here is support for msgr2 on-wire protocol, which adds the option of full in-transit encryption using AES-GCM algorithm (myself). On top of that we have a series to avoid intermittent errors during recovery with recover_session=clean and some MDS request encoding work from Jeff, a cap handling fix and assorted observability improvements from Luis and Xiubo and a good number of cleanups. Luis also ran into a corner case with quotas which sadly means that we are back to denying cross-quota-realm renames" * tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits) libceph: drop ceph_auth_{create,update}_authorizer() libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1 libceph, ceph: implement msgr2.1 protocol (crc and secure modes) libceph: introduce connection modes and ms_mode option libceph, rbd: ignore addr->type while comparing in some cases libceph, ceph: get and handle cluster maps with addrvecs libceph: factor out finish_auth() libceph: drop ac->ops->name field libceph: amend cephx init_protocol() and build_request() libceph, ceph: incorporate nautilus cephx changes libceph: safer en/decoding of cephx requests and replies libceph: more insight into ticket expiry and invalidation libceph: move msgr1 protocol specific fields to its own struct libceph: move msgr1 protocol implementation to its own file libceph: separate msgr1 protocol implementation libceph: export remaining protocol independent infrastructure libceph: export zero_page libceph: rename and export con->flags bits libceph: rename and export con->state states libceph: make con->state an int ...
Powered by cgit, Gruvboxed by Blaster4385.