| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make the returns a bit more kernel standard style.
Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Originally it was impossible to be dropping the last refcount in this
function since there was always one around still from the idr. But in
commit 83f45fc360c8e16a330474860ebda872d1384c8c
Author: Daniel Vetter <[email protected]>
Date: Wed Aug 6 09:10:18 2014 +0200
drm: Don't grab an fb reference for the idr
we've switched to weak references, broke that assumption but forgot to
fix it up.
Since we still force-disable planes it's only possible to hit this
when racing multiple rmfb with fbdev restoring or similar evil things.
As long as userspace is nice it's impossible to hit the BUG_ON.
But the BUG_ON would most likely be hit from fbdev code, which usually
invovles the console_lock besides all modeset locks. So very likely
we'd never get the bug reports if this was hit in the wild, hence
better be safe than sorry and backport.
Spotted by Matt Roper while reviewing other patches.
[airlied: pull this back into 4.0 - the oops happens there]
Cc: [email protected]
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
KVM guest can fail to startup with following trace on host:
qemu-system-x86: page allocation failure: order:4, mode:0x40d0
Call Trace:
dump_stack+0x47/0x67
warn_alloc_failed+0xee/0x150
__alloc_pages_direct_compact+0x14a/0x150
__alloc_pages_nodemask+0x776/0xb80
alloc_kmem_pages+0x3a/0x110
kmalloc_order+0x13/0x50
kmemdup+0x1b/0x40
__kvm_set_memory_region+0x24a/0x9f0 [kvm]
kvm_set_ioapic+0x130/0x130 [kvm]
kvm_set_memory_region+0x21/0x40 [kvm]
kvm_vm_ioctl+0x43f/0x750 [kvm]
Failure happens when attempting to allocate pages for
'struct kvm_memslots', however it doesn't have to be
present in physically contiguous (kmalloc-ed) address
space, change allocation to kvm_kvzalloc() so that
it will be vmalloc-ed when its size is more then a page.
Signed-off-by: Igor Mammedov <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
kvm_ioapic_update_eoi() wasn't called if directed EOI was enabled.
We need to do that for irq notifiers. (Like with edge interrupts.)
Fix it by skipping EOI broadcast only.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=82211
Signed-off-by: Radim Krčmář <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Tested-by: Bandan Das <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Commit c4db59d31e39 ("fs: don't reassign dirty inodes to
default_backing_dev_info") exposed DM to a latent race in free_dev() vs
add_disk() in relation to management of the device's minor number.
Fix this by refactoring free_dev() to match cleanup order of the
alloc_dev() error path. Move cleanup of the gendisk, queue, and bdev
to _before_ the cleanup of the idr managed minor number.
Also, purely due to cleanup that fell out during the free_dev() audit:
- adjust dm_blk_close() to access the gendisk's private_data under
the _minor_lock spinlock.
- move __dm_destroy()'s dm_get_live_table() call out from under the
_minor_lock spinlock.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1202449
Reported-by: Zdenek Kabelac <[email protected]>
Reported-by: Jeff Moyer <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
'regulator/fix/palmas' into regulator-linus
|
|
The idle_task_exit() function may call switch_mm() with next ==
&init_mm. On arm64, init_mm.pgd cannot be used for user mappings, so
this patch simply sets the reserved TTBR0.
Cc: <[email protected]>
Reported-by: Jon Medhurst (Tixy) <[email protected]>
Tested-by: Jon Medhurst (Tixy) <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Validate iov ranges before feeding them into iov_iter_init(), from
Al Viro.
2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
is a NULL pointer is given for the msg_name. Do the same in the
compat code too. From Catalin Marinas.
3) Fix partially initialized tuples in netfilter conntrack helper, from
Ian Wilson.
4) Missing continue; statement in nft_hash walker can lead to crashes,
from Herbert Xu.
5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
->invflags, fix from Pablo Neira Ayuso.
6) Incorrect memory account of TCP FINs can result in negative socket
memory accounting values. Fix from Josh Hunt.
7) Don't allow virtual functions to enable VLAN promiscuous mode in
be2net driver, from Vasundhara Volam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
cx82310_eth: wait for firmware to become ready
net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
be2net: use PCI MMIO read instead of config read for errors
be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
be2net: Prevent VFs from enabling VLAN promiscuous mode
tcp: fix tcp fin memory accounting
ipv6: fix backtracking for throw routes
net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
netfilter: restore rule tracing via nfnetlink_log
netfilter: nf_tables: allow to change chain policy without hook if it exists
netfilter: Fix potential crash in nft_hash walker
netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
|
|
Pull sparc fixes from David Miller:
"Some perf bug fixes from David Ahern, and the fix for that nasty
memmove() bug"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix several bugs in memmove().
sparc: Touch NMI watchdog when walking cpus and calling printk
sparc: perf: Add support M7 processor
sparc: perf: Make counting mode actually work
sparc: perf: Remove redundant perf_pmu_{en|dis}able calls
|
|
This model uses the same dock port as the previous generation.
Signed-off-by: Sebastian Wicki <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Firstly, handle zero length calls properly. Believe it or not there
are a few of these happening during early boot.
Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src. The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.
For example, considering NG4memcpy, the main unrolled loop begins like
this:
load src + 0x00
load src + 0x08
load src + 0x10
load src + 0x18
load src + 0x20
store dst + 0x00
Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call. That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.
To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well. We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.
Reported-by: David Ahern <[email protected]>
Reported-by: Bob Picco <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001
From: Tejun Heo <[email protected]>
Date: Mon, 23 Mar 2015 00:08:19 -0400
2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
introduced account_page_redirty() which reverts stat updates for a
redirtied page, making BDI_DIRTIED no longer monotonically increasing.
bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the
basis for bandwidth calculation. While unlikely, since the above
patch, the newer value may be lower than the recorded past value and
underflow the bandwidth calculation leading to a wild result.
Fix it by subtracing min of the old and new values when calculating
delta. AFAIK, there hasn't been any report of it happening but the
resulting erratic behavior would be non-critical and temporary, so
it's possible that the issue is happening without being reported. The
risk of the fix is very low, so tagged for -stable.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Wu Fengguang <[email protected]>
Cc: Greg Thelen <[email protected]>
Fixes: 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
Cc: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Driver recovery requires the device's list node to have been initialized.
Fixes: https://lkml.org/lkml/2015/3/22/262
Reported-by: Steven Noonan <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We need to cap "ucontrol->id.index / num_busses_in(chip)" so the we
don't read beyond the end of the array.
I also adding a check on "in" and changing the type in
snd_echo_mixer_put() from short to unsigned int. Those changes are done
for symmetry and are cosmetic.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
"err" is always a negative error code here, so there is no point in
checking. Removing the check silences a static checker warning and
makes the code a bit more clear. Also we don't need to initialize "err".
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When ioremap_wc() or ioremap_cached() are used without first including
asm/pgtable.h, the _PAGE_CACHEABLE or _PAGE_WR_COMBINE definitions
aren't found, resulting in build errors like the following (in
next-20150323 due to "lib: devres: add a helper function for
ioremap_wc"):
lib/devres.c: In function ‘devm_ioremap_wc’:
lib/devres.c:91: error: ‘_PAGE_WR_COMBINE’ undeclared
We can't easily include asm/pgtable.h in asm/io.h due to dependency
problems, so split out the _PAGE_* definitions from asm/pgtable.h into a
separate asm/pgtable-bits.h header (as a couple of other architectures
already do), and include that in io.h instead.
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Cc: Abhilash Kesavan <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
|
|
The 16bit COEF read/write is pretty standard for many codecs, and they
can be cached in most cases -- more importantly, they need to be
restored at resume. For making this easier, add the cache support to
regmap. If the codec driver wants to cache the COEF access, set
codec->cache_coef flag and issue AC_VERB_GET_PROC_COEF with the coef
index in LSB 8 bits.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
HD-audio has quite a few asymmetrical ways of accessing verbs, and one
of typical ones is GET/SET_POWER_STATE verbs. While it takes only the
power state for setting, it returns a combination of states for
getting. For making the state handling simpler, this patch adds a
code to translate the value returned from GET_POWER_STATE to return
only the actual state or -1 for error. In that way, the driver can
simplify the power state management.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
HD-audio spec is inconvenient regarding the handling of stereo volume
controls. It can set and get only single channel at once (although
there is a special option to set the same value to both channels).
This patch provides a fake pseudo-register via the regmap access so
that the stereo channels can be read and written by a single call.
It'd be useful, for example, for implementing DAPM widgets.
A stereo amp pseudo register consists of the encoding like the normal
amp verbs but it has both SET_LEFT (bit 13) and SET_RIGHT (bit 12)
bits set. The regmap reads and writes a 16bit value for this pseudo
register where the upper 8bit is for the right chanel and the lower
8bit for the left channel.
Note that the driver doesn't recognize conflicts when both stereo and
mono channel registers are mixed. Mixing them would certainly confuse
the operation. So, use carefully.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Like the previous patches, this patch converts also to the regmap, at
this time, the cached verb writes are the target. But this conversion
needs a bit more caution than before.
- In the old code, we just record any verbs as is, and restore them at
resume. For the regmap scheme, this doesn't work, since a few verbs
like AMP or DIGI_CONVERT are asymmetrical. Such verbs are converted
either to the dedicated function (snd_hda_regmap_xxx_amp()) or
changed to the unified verb.
- Some verbs have to be declared as vendor-specific ones before
accessing via regmap.
Also, the minor optimization with codec->cached_write flag is dropped
in a few places, as this would confuse the operation. Further
optimizations will be brought in the later patches, if any.
This conversion ends up with a drop of significant amount of codes,
mostly the helper codes that are no longer used.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Codecs may have own vendor-specific verbs, and we need to allow each
driver to give such verbs for cached accesses. Here a verb can be put
into a single array and looked through it at readable and writeable
callbacks.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The amp hash table was used for recording the cached reads of some
capability values like pin caps or amp caps. Now all these are moved
to regmap as well.
One addition to the regmap helper is codec->caps_overwriting flag.
This is set in snd_hdac_override_parm(), and the regmap helper accepts
any register while this flag is set, so that it can overwrite even the
read-only verb like AC_VERB_PARAMETERS. The flag is cleared
immediately in snd_hdac_override_parm(), as it's a once-off flag.
Along with these changes, the no longer needed amp hash and relevant
fields are removed from hda_codec struct now.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch converts the amp access functions to the regmap helpers.
The amp values were formerly cached in the own hash table. Now it's
dropped by the regmap's cache.
The only tricky conversion is snd_hda_codec_amp_init(). This function
shouldn't do anything if the amp was already initialized. For
achieving this behavior, a value is read once at first temporarily in
the cache-only mode. Only if it returns an error, i.e. the item
still doesn't exist in the cache, it proceeds to the update.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Sometimes we need the uncached reads, e.g. for refreshing the tree.
This patch provides the helper function for that and uses it for
refreshing widgets, reading subtrees and the whole proc reads.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Let's start converting the access functions to regmap.
The first one is the simplest, just converting the codec parameter
read helper function snd_hda_param_read().
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch adds an infrastructure to support regmap-based verb
accesses. Because o the asymmetric nature of HD-audio verbs,
especially the amp verbs, we need to translate the verbs as a sort of
pseudo registers to be mapped uniquely in regmap.
In this patch, a pseudo register is built from the NID, the
AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent
to HD-audio bus but without codec address field. OTOH, for writing,
the same pseudo register is translated to AC_VERB_SET_* automatically.
The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding
AC_VERB_GET_AMP_* verb and parameter at writing.
Some verbs has a single command for read but multiple for writes. A
write for such a verb is split automatically to multiple verbs.
The patch provides also a few handy helper functions. They are
designed to be accessible even without regmap. When no regmap is set
up (e.g. before the codec device instantiation), the direct hardware
access is used. Also, it tries to avoid the unnecessary power-up.
The power up/down sequence is performed only on demand.
The codec driver needs to call snd_hdac_regmap_exit() and
snd_hdac_regmap_exit() at probe and remove if it wants the regmap
access.
There is one flag added to hdac_device. When the flag lazy_cache is
set, regmap helper ignores a write for a suspended device and returns
as if it was actually written. It reduces the hardware access pretty
much, e.g. when adjusting the mixer volume while in idle. This
assumes that the driver will sync the cache later at resume properly,
so use it carefully.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This will be used by the regmap support.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Now let's take the basic tracepoints back to the HD-audio driver.
The three bus tracepoints, hda_send_cmd, hda_get_response and
hda_unsol_event are revived but in a slightly different form.
Since we don't assign the card number there, print the bus device name
instead.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When the driver is unloaded before the codec is bound, it still keeps
the runtime PM refcount up, and results in the unbalance. This patch
covers these cases by introducing a flag indicating the runtime PM
initialization and handling the codec registration procedure more
properly. It also fixes the missing input beep device as a gratis,
too.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add an overriding exec_verb op to struct hdac_device so that the call
via snd_hdac_exec_verb() can switch to a different route depending on
the setup. The codec driver sets this field so that it can handle the
errors or applying quirks appropriately. Furthermore, this mechanism
will be used for smooth transition for the regmap support in later
patches.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch changes the sysfs files assigned to the codec device on the
bus which were formerly identical with hwdep sysfs files. Now it
shows only a few core parameter, vendor_id, subsystem_id, revision_id,
afg, mfg, vendor_name and chip_name.
In addition, now a widget tree is added to the bus device sysfs
directory for showing the widget topology and attributes. It's just a
flat tree consisting of subdirectories named as the widget NID
including various attributes like widget capability bits. The AFG
(usually NID 0x01) is always found there, and it contains always
amp_in_caps, amp_out_caps and power_caps files. Each of these
attributes show a single value. The rest are the widget nodes
belonging to that AFG. Note that the child node might not start from
0x02 but from another value like 0x0a.
Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps,
power_caps and connections files. The caps (representing the widget
capability bits) always contain a value. The rest may contain
value(s) if the attribute exists on the node. Only connections file
show multiple values while other attributes have zero or one single
value.
An example of ls -R output is like below:
% ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/:
01/ 04/ 07/ 0a/ 0d/ 10/ 13/ 16/ 19/ 1c/ 1f/ 22/
02/ 05/ 08/ 0b/ 0e/ 11/ 14/ 17/ 1a/ 1d/ 20/ 23/
03/ 06/ 09/ 0c/ 0f/ 12/ 15/ 18/ 1b/ 1e/ 21/
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01:
amp_in_caps amp_out_caps power_caps
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02:
amp_in_caps amp_out_caps caps connections pin_caps pin_cfg
power_caps
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03:
.....
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Now some codes and functionalities of hda_codec struct are moved to
hdac_device struct. A few basic attributes like the codec address,
vendor ID number, FG numbers, etc are moved to hdac_device, and they
are accessed like codec->core.addr. The basic verb exec functions are
moved, too.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
A few basic codes for communicating over HD-audio bus are moved to
struct hdac_bus now. It has only command and get_response ops in
addition to the unsolicited event handling.
Note that the codec-side tracing support is disabled temporarily
during this transition due to the code shuffling. It will be
re-enabled later once when all pieces are settled down.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Define the common hd-audio driver and device types to bind over
snd_hda_bus_type publicly. This allows to implement other type of
device and driver code over hd-audio bus.
Now both struct hda_codec and struct hda_codec_driver inherit these
new struct hdac_device and struct hdac_driver, respectively.
The bus registration is done in subsys_initcall() to assure it
before any other driver registrations.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
|
|
Make the code which sets up the pmd depend on PT_NLEVELS == 3, not on
CONFIG_64BIT. The reason is, that a 64bit kernel with a page size
greater than 4k doesn't need the pmd and thus has PT_NLEVELS = 2.
Signed-off-by: Helge Deller <[email protected]>
|
|
The patch dc6c9a35b66b520cf67e05d8ca60ebecad3b0479 that counts pmds
allocated for a process introduced a bug on 64-bit PA-RISC kernels.
The PA-RISC architecture preallocates one pmd with each pgd. This
preallocated pmd can never be freed - pmd_free does nothing when it is
called with this pmd. When the kernel attempts to free this preallocated
pmd, it decreases the count of allocated pmds. The result is that the
counter underflows and this error is reported.
This patch fixes the bug by artifically incrementing the counter in
pmd_free when the kernel tries to free the preallocated pmd.
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Signed-off-by: Helge Deller <[email protected]>
|
|
The hrtimer mode of broadcast queues hrtimers in the idle entry
path so as to wakeup cpus in deep idle states. The associated
call graph is :
cpuidle_idle_call()
|____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....))
|_____tick_broadcast_set_event()
|____clockevents_program_event()
|____bc_set_next()
The hrtimer_{start/cancel} functions call into tracing which uses RCU.
But it is not legal to call into RCU in cpuidle because it is one of the
quiescent states. Hence protect this region with RCU_NONIDLE which informs
RCU that the cpu is momentarily non-idle.
As an aside it is helpful to point out that the clock event device that is
programmed here is not a per-cpu clock device; it is a
pseudo clock device, used by the broadcast framework alone.
The per-cpu clock device programming never goes through bc_set_next().
Signed-off-by: Preeti U Murthy <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Module unload calls lockdep_free_key_range(), which removes entries
from the data structures. Most of the lockdep code OTOH assumes the
data structures are append only; in specific see the comments in
add_lock_to_list() and look_up_lock_class().
Clearly this has only worked by accident; make it work proper. The
actual scenario to make it go boom would involve the memory freed by
the module unlock being re-allocated and re-used for a lock inside of
a rcu-sched grace period. This is a very unlikely scenario, still
better plug the hole.
Use RCU list iteration in all places and ammend the comments.
Change lockdep_free_key_range() to issue a sync_sched() between
removal from the lists and returning -- which results in the memory
being freed. Further ensure the callers are placed correctly and
comment the requirements.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andrey Tsyvarev <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When non-realtime tasks get priority-inheritance boosted to a realtime
scheduling class, RLIMIT_RTTIME starts to apply to them. However, the
counter used for checking this (the same one used for SCHED_RR
timeslices) was not getting reset. This meant that tasks running with a
non-realtime scheduling class which are repeatedly boosted to a realtime
one, but never block while they are running realtime, eventually hit the
timeout without ever running for a time over the limit. This patch
resets the realtime timeslice counter when un-PI-boosting from an RT to
a non-RT scheduling class.
I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT
mutex which induces priority boosting and spins while boosted that gets
killed by a SIGXCPU on non-fixed kernels but doesn't with this patch
applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and
does happen eventually with PREEMPT_VOLUNTARY kernels.
Signed-off-by: Brian Silverman <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Vince reported a watchdog lockup like:
[<ffffffff8115e114>] perf_tp_event+0xc4/0x210
[<ffffffff810b4f8a>] perf_trace_lock+0x12a/0x160
[<ffffffff810b7f10>] lock_release+0x130/0x260
[<ffffffff816c7474>] _raw_spin_unlock_irqrestore+0x24/0x40
[<ffffffff8107bb4d>] do_send_sig_info+0x5d/0x80
[<ffffffff811f69df>] send_sigio_to_task+0x12f/0x1a0
[<ffffffff811f71ce>] send_sigio+0xae/0x100
[<ffffffff811f72b7>] kill_fasync+0x97/0xf0
[<ffffffff8115d0b4>] perf_event_wakeup+0xd4/0xf0
[<ffffffff8115d103>] perf_pending_event+0x33/0x60
[<ffffffff8114e3fc>] irq_work_run_list+0x4c/0x80
[<ffffffff8114e448>] irq_work_run+0x18/0x40
[<ffffffff810196af>] smp_trace_irq_work_interrupt+0x3f/0xc0
[<ffffffff816c99bd>] trace_irq_work_interrupt+0x6d/0x80
Which is caused by an irq_work generating new irq_work and therefore
not allowing forward progress.
This happens because processing the perf irq_work triggers another
perf event (tracepoint stuff) which in turn generates an irq_work ad
infinitum.
Avoid this by raising the recursion counter in the irq_work -- which
effectively disables all software events (including tracepoints) from
actually triggering again.
Reported-by: Vince Weaver <[email protected]>
Tested-by: Vince Weaver <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
commit id 2ba9f0d has changed CONFIG_KVM_BOOK3S_64_HV to tristate to allow
HV/PR bits to be built as modules. But the MCE code still depends on
CONFIG_KVM_BOOK3S_64_HV which is wrong. When user selects
CONFIG_KVM_BOOK3S_64_HV=m to build HV/PR bits as a separate module the
relevant MCE code gets excluded.
This patch fixes the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLER. This
makes sure that the relevant MCE code is included when HV/PR bits
are built as a separate modules.
Fixes: 2ba9f0d88750 ("kvm: powerpc: book3s: Support building HV and PR KVM as module")
Cc: [email protected] # v3.14+
Signed-off-by: Mahesh Salgaonkar <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
|
|
Pull bugfix for md from Neil Brown:
"One fix for md in 4.0-rc4
Regression in recent patch causes crash on error path"
* tag 'md/4.0-rc4-fix' of git://neil.brown.name/md:
md: fix problems with freeing private data after ->run failure.
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix missing initialization of tuple structure in nfnetlink_cthelper
to avoid mismatches when looking up to attach userspace helpers to
flows, from Ian Wilson.
2) Fix potential crash in nft_hash when we hit -EAGAIN in
nft_hash_walk(), from Herbert Xu.
3) We don't need to indicate the hook information to update the
basechain default policy in nf_tables.
4) Restore tracing over nfnetlink_log due to recent rework to
accomodate logging infrastructure into nf_tables.
5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.
6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
REJECT6 from xt over nftables.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two bugfixes for things reported. One regression in kernfs,
and another issue fixed in the LZ4 code that was fixed in the
"upstream" codebase that solves a reported kernel crash
Both have been in linux-next for a while"
* tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
LZ4 : fix the data abort issue
kernfs: handle poll correctly on 'direct_read' files.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that
were merged in 4.0-rc1 that cause regressions. So let's revert them
for now and they will be reworked and resent sometime in the future.
All have been tested in linux-next for a while"
* tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "pcmcia: add a new resource manager for non ISA systems"
Revert "pcmcia: fix incorrect bracketing on a test"
Revert "pcmcia: add missing include for new pci resource handler"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are four small staging driver fixes, all for the vt6656 and
vt6655 drivers, that resolve some reported issues with them.
All of these patches have been in linux next for a while"
* tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
vt6655: Fix late setting of byRFType.
vt6655: RFbSetPower fix missing rate RATE_12M
staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M
staging: vt6655: vnt_tx_packet fix dma_idx selection.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fix from Greg KH:
"Here's a single 8250 serial driver that fixes a reported deadlock with
the serial console and the tty driver.
It's been in linux-next for a while now"
* tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Fix deadlock in LCR workaround
|