aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-04-23net: fix sk_memory_allocated_{add|sub} vs softirqsEric Dumazet1-18/+20
Jonathan Heathcote reported a regression caused by blamed commit on aarch64 architecture. x86 happens to have irq-safe __this_cpu_add_return() and __this_cpu_sub(), but this is not generic. I think my confusion came from "struct sock" argument, because these helpers are called with a locked socket. But the memory accounting is per-proto (and per-cpu after the blamed commit). We might cleanup these helpers later to directly accept a "struct proto *proto" argument. Switch to this_cpu_add_return() and this_cpu_xchg() operations, and get rid of preempt_disable()/preempt_enable() pairs. Fast path becomes a bit faster as a result :) Many thanks to Jonathan Heathcote for his awesome report and investigations. Fixes: 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated") Reported-by: Jonathan Heathcote <[email protected]> Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/ Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Reviewed-by: Shakeel Butt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-24ASoC: dt-bindings: renesas: Fix R-Car Gen4 SoC-specific compatiblesGeert Uytterhoeven1-2/+3
make dtbs_check: arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dtb: sound@ec5a0000: compatible: 'oneOf' conditional failed, one must be fixed: ['renesas,rcar_sound-r8a779g0', 'renesas,rcar_sound-gen4'] is too short ... 'renesas,rcar_sound-r8a779h0' was expected The list of SoC-specific compatible values for R-Car Gen4 SoCs is mutually-exclusive, just like for other R-Car SoC generations, so it should use an enum. Fixes: d6e792ed7dd022a1 ("ASoC: dt-bindings: renesas: add R8A779H0 V4M") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/b3a6cf12c46b23a501b0d54c6892b969e2a55145.1713874657.git.geert+renesas@glider.be Signed-off-by: Mark Brown <[email protected]>
2024-04-24ASoc: PCM6240: Fix spelling mistake: "deley" -> "delay"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-24ASoC: dt-bindings: tegra20-ac97: convert to dt schemaMohammad Shehar Yaar Tausif2-36/+82
Convert NVIDIA Tegra20 AC97 binding to DT schema. Change -gpio to -gpios in schema as "gpio" suffix is deprecated. Signed-off-by: Mohammad Shehar Yaar Tausif <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-23Revert "NFSD: Convert the callback workqueue to use delayed_work"Chuck Lever2-4/+4
This commit was a pre-requisite for commit c1ccfcf1a9bf ("NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"), which has already been reverted. Signed-off-by: Chuck Lever <[email protected]>
2024-04-23Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"Chuck Lever1-18/+2
The reverted commit attempted to enable NFSD to retransmit pending callback operations if an NFS client disconnects, but unintentionally introduces a hazardous behavior regression if the client becomes permanently unreachable while callback operations are still pending. A disconnect can occur due to network partition or if the NFS server needs to force the NFS client to retransmit (for example, if a GSS window under-run occurs). Reverting the commit will make NFSD behave the same as it did in v6.8 and before. Pending callback operations are permanently lost if the client connection is terminated before the client receives them. For some callback operations, this loss is not harmful. However, for CB_RECALL, the loss means a delegation might be revoked unnecessarily. For CB_OFFLOAD, pending COPY operations will never complete unless the NFS client subsequently sends an OFFLOAD_STATUS operation, which the Linux NFS client does not currently implement. These issues still need to be addressed somehow. Reported-by: Dai Ngo <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218735 Signed-off-by: Chuck Lever <[email protected]>
2024-04-23ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functionsRafael J. Wysocki1-5/+3
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") attempted to avoid evaluating the same Low- Power S0 Idle _DSM functions for different UUIDs, but that turns out to be a mistake, because some systems in the field are adversely affected by it. Address this by allowing all Low-Power S0 Idle _DSM functions to be evaluated, but still print the message regarding duplication of Low- Power S0 Idle _DSM function sets for different UUIDs. Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750 Reported-and-tested-by: Mark Pearson <[email protected]> Suggested-by: Mario Limonciello <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Mario Limonciello <[email protected]>
2024-04-23Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-26/+176
Pull smb client fixes from Steve French: - fscache fix - fix for case where we could use uninitialized lease - add tracepoint for debugging refcounting of tcon - fix mount option regression (e.g. forceuid vs. noforceuid when uid= specified) caused by conversion to the new mount API * tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reinstate original behavior again for forceuid/forcegid smb: client: fix rename(2) regression against samba cifs: Add tracing for the cifs_tcon struct refcounting cifs: Fix reacquisition of volume cookie on still-live connection
2024-04-23tools: ynl: don't ignore errors in NLMSG_DONE messagesJakub Kicinski1-0/+1
NLMSG_DONE contains an error code, it has to be extracted. Prior to this change all dumps will end in success, and in case of failure the result is silently truncated. Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-04-23ax25: Fix netdev refcount issueDuoming Zhou1-1/+1
The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation") Signed-off-by: Duoming Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-04-23ASoC: rt715-sdca: volume step modificationJack Yu1-4/+4
Volume step (dB/step) modification to fix format error which shown in amixer control. Signed-off-by: Jack Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-23ASoC: cs35l41: Delete unnecessary condition in cs35l41_pcm_hw_params()Dan Carpenter1-4/+3
This code returns -EINVAL if "i" is out of bounds a few lines earlier. Delete this unnecessary check and pull the code in a tab. Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-23ASoC: dt-bindings: mt2701-wm8960: Convert to dtschemaKartik Agarwala2-24/+54
Convert mt2701-wm890 bindings from text to dtschema. This is used by MediaTek mt7623a/n SoC. Signed-off-by: Kartik Agarwala <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-23ASoC: soc.h: Don't use "proxy" headersAndy Shevchenko1-10/+20
Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-23ASoC: cs35l56: Avoid static analysis warning of uninitialised variableSimon Trimmer1-1/+1
Static checkers complain that the silicon_uid variable passed by pointer to cs35l56_read_silicon_uid() could later be used uninitialised when calling cs_amp_get_efi_calibration_data(). cs35l56_read_silicon_uid() must have succeeded to call cs_amp_get_efi_calibration_data() and that would have populated the variable. However, initialise the value so we are not haunted by it forevermore. Signed-off-by: Simon Trimmer <[email protected]> Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration") Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-22Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds5-28/+42
Pull smb server fixes from Steve French: "Five ksmbd server fixes, most also for stable: - rename fix - two fixes for potential out of bounds - fix for connections from MacOS (padding in close response) - fix for when to enable persistent handles" * tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add continuous availability share parameter ksmbd: common: use struct_group_attr instead of struct_group for network_open_info ksmbd: clear RENAME_NOREPLACE before calling vfs_rename ksmbd: validate request buffer size in smb2_allocate_rsp_buf() ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
2024-04-22NFC: trf7970a: disable all regulators on removalPaul Geurts1-19/+23
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-22MAINTAINERS: eth: mark IBM eHEA as an OrphanDavid Christensen1-2/+1
Current maintainer Douglas Miller has left IBM and no replacement has been assigned for the driver. The eHEA hardware was last used on IBM POWER7 systems, the last of which reached end-of-support at the end of 2020. Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pradeep Satyanarayana <[email protected]> Acked-by: Michael Ellerman <[email protected]> (powerpc) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-22vDPA: code clean for vhost_vdpa uapiZhu Lingshan2-6/+6
This commit cleans up the uapi for vhost_vdpa by better naming some of the enums which report blk information to user space, and they are not in any official releases yet. Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space") Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space") Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space") Signed-off-by: Zhu Lingshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2024-04-22Merge tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefsLinus Torvalds19-52/+105
Pull bcachefs fixes from Kent Overstreet: "Nothing too crazy in this one, and it looks like (fingers crossed) the recovery and repair issues are settling down - although there's going to be a long tail there, as we've still yet to really ramp up on error injection or syzbot. - fix a few more deadlocks in recovery - fix u32/u64 issues in mi_btree_bitmap - btree key cache shrinker now actually frees, with more instrumentation coming so we can verify that it's working correctly more easily in the future" * tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs: bcachefs: If we run merges at a lower watermark, they must be nonblocking bcachefs: Fix inode early destruction path bcachefs: Fix deadlock in journal write path bcachefs: Tweak btree key cache shrinker so it actually frees bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong bcachefs: Fix missing call to bch2_fs_allocator_background_exit() bcachefs: Check for journal entries overruning end of sb clean section bcachefs: Fix bio alloc in check_extent_checksum() bcachefs: fix leak in bch2_gc_write_reflink_key bcachefs: KEY_TYPE_error is allowed for reflink bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift bcachefs: make sure to release last journal pin in replay bcachefs: node scan: ignore multiple nodes with same seq if interior bcachefs: Fix format specifier in validate_bset_keys() bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
2024-04-22net: dsa: mv88e6xx: fix supported_interfaces setup in ↵Matthias Schiffer2-8/+71
mv88e6250_phylink_get_caps() With the recent PHYLINK changes requiring supported_interfaces to be set, MV88E6250 family switches like the 88E6020 fail to probe - cmode is never initialized on these devices, so mv88e6250_phylink_get_caps() does not set any supported_interfaces flags. Instead of a cmode, on 88E6250 we have a read-only port mode value that encodes similar information. There is no reason to bother mapping port mode to the cmodes of other switch models; instead we introduce a mv88e6250_setup_supported_interfaces() that is called directly from mv88e6250_phylink_get_caps(). Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Matthias Schiffer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-22Merge tag 'nfsd-6.9-4' of ↵Linus Torvalds3-78/+26
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix an NFS/RDMA performance regression in v6.9-rc * tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
2024-04-22ACPI: CPPC: Fix access width used for PCC registersVanshidhar Konda1-16/+37
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") modified cpc_read()/cpc_write() to use access_width to read CPC registers. However, for PCC registers the access width field in the ACPI register macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is incorrectly treated as access width. This causes errors when reading from PCC registers in the CPPC driver. For PCC registers, base the size of read/write on the bit width field. The debug message in cpc_read()/cpc_write() is updated to print relevant information for the address space type used to read the register. Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Vanshidhar Konda <[email protected]> Tested-by: Jarred White <[email protected]> Reviewed-by: Jarred White <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Cc: 5.15+ <[email protected]> # 5.15+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-04-22ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macroJarred White1-2/+2
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") neglected to properly wrap the bit_offset shift when it comes to applying the mask. This may cause incorrect values to be read and may cause the cpufreq module not be loaded. [ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance. [ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs Also, corrected the bitmask generation in GENMASK (extra bit being added). Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Jarred White <[email protected]> Cc: 5.15+ <[email protected]> # 5.15+ Reviewed-by: Vanshidhar Konda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-04-22Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linuxLinus Torvalds1-180/+417
Pull documentation fixes from Jonathan Corbet: "A set of updates from Thorsten to his (new) guide to verifying bugs and tracking down regressions" * tag 'docs-6.9-fixes2' of git://git.lwn.net/linux: docs: verify/bisect: stable regressions: first stable, then mainline docs: verify/bisect: describe how to use a build host docs: verify/bisect: explain testing reverts, patches and newer code docs: verify/bisect: proper headlines and more spacing docs: verify/bisect: add and fetch stable branches ahead of time docs: verify/bisect: use git switch, tag kernel, and various fixes
2024-04-22cifs: reinstate original behavior again for forceuid/forcegidTakayuki Nagata2-0/+14
forceuid/forcegid should be enabled by default when uid=/gid= options are specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api") changed the behavior. Due to the change, a mounted share does not show intentional uid/gid for files and directories even though uid=/gid= options are specified since forceuid/forcegid are not enabled. This patch reinstates original behavior that overrides uid/gid with specified uid/gid by the options. Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Takayuki Nagata <[email protected]> Acked-by: Paulo Alcantara (Red Hat) <[email protected]> Acked-by: Ronnie Sahlberg <[email protected]> Acked-by: Tom Talpey <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-04-22 fs/9p: mitigate inode collisionsEric Van Hensbergen4-22/+56
Detect and mitigate inode collsions that now occur since we fixed 9p generating duplicate inode structures. Underlying cause of these appears to be a race condition between reuse of inode numbers in underlying file system and cleanup of inode numbers in the client. Enabling caching makes this much more likely to happen as it increases cleanup latency due to writebacks. Reported-by: Kent Overstreet <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]>
2024-04-22Merge branch 'bnxt_en-aer-fixes'David S. Miller1-10/+28
Michael Chan says: ==================== bnxt_en: AER fixes This patchset fixes issues in the AER recovery logic. The first patch refactors the code to make a shutdown function available for AER fatal errors. The second patch fixes the AER fatal recovery logic. The third patch fixes the health register logic to fix AER recovery failure for the new P7 chips. ==================== Signed-off-by: Arınç ÜNAL <[email protected]>
2024-04-22bnxt_en: Fix error recovery for 5760X (P7) chipsMichael Chan1-1/+1
During error recovery, such as AER fatal error slot reset, we call bnxt_try_map_fw_health_reg() to try to get access to the health register to determine the firmware state. Fix bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly and set up the health register. This fixes this type of AER slot reset failure: bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call pcieport 0000:00:02.0: AER: Root Port link has been reset (0) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset bnxt_en 0000:04:00.0: enabling device (0000 -> 0002) bnxt_en 0000:04:00.0: Firmware not ready bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset bnxt_en 0000:04:00.1: enabling device (0000 -> 0002) bnxt_en 0000:04:00.1: Firmware not ready pcieport 0000:00:02.0: AER: device recovery failed Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22bnxt_en: Fix the PCI-AER routinesVikas Gupta1-3/+16
We do not support two simultaneous recoveries so check for reset flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further. When the pci channel state is pci_channel_io_frozen, the PCIe link can not be trusted so we disable the traffic immediately and stop BAR access by calling bnxt_fw_fatal_close(). BAR access after AER fatal error can cause an NMI. Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22bnxt_en: refactor reset close codeVikas Gupta1-6/+11
Introduce bnxt_fw_fatal_close() API which can be used to stop data path and disable device when firmware is in fatal state. Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22bridge/br_netlink.c: no need to return void functionHangbin Liu1-1/+1
br_info_notify is a void function. There is no need to return. Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22mailmap: add entries for Alex ElderAlex Elder1-0/+10
Define my kernel.org address to be the canonical one, and add mailmap entries for the various addresses (including typos) that have been used over the years. Signed-off-by: Alex Elder <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22icmp: prevent possible NULL dereferences from icmp_build_probe()Eric Dumazet1-2/+10
First problem is a double call to __in_dev_get_rcu(), because the second one could return NULL. if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list) Second problem is a read from dev->ip6_ptr with no NULL check: if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list)) Use the correct RCU API to fix these. v2: add missing include <net/addrconf.h> Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Signed-off-by: Eric Dumazet <[email protected]> Cc: Andreas Roeseler <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas1-0/+3
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-22wifi: iwlwifi: mvm: fix link ID managementJohannes Berg1-1/+1
On older (pre-MLD API) devices, we started also calling iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(), but of course not also iwl_mvm_remove_link(). Since the link ID was only released in iwl_mvm_remove_link() this causes us to run out of FW link IDs very quickly. Fix it by releasing the link ID correctly. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-04-22bcachefs: If we run merges at a lower watermark, they must be nonblockingKent Overstreet1-1/+5
Fix another deadlock related to the merge path; previously, we switched to always running merges at a lower watermark (because they are noncritical); but when we run at a lower watermark we also need to run nonblocking or we've introduced a new deadlock. Signed-off-by: Kent Overstreet <[email protected]> Reported-and-tested-by: [email protected]
2024-04-22ASoC: PCM6240: New driverMark Brown5-0/+2658
Merge series from Shenghao Ding <[email protected]>: mixer-test report: root@am335x-evm:/bin# mixer-test TAP version 13 # Card 0 - TI BeagleBone Black (TI BeagleBone Black) 1..455 ok 1 get_value.0.64 # 0.64 PCMD3180 i2c2 Profile id ok 2 name.0.64 ok 3 write_default.0.64 ok 4 write_valid.0.64 ok 5 write_invalid.0.64 ok 6 event_missing.0.64 ok 7 event_spurious.0.64 ok 8 get_value.0.63 # 0.63 PCMD3180 i2c2 Dev3 Ch8 Digi Volume ok 9 name.0.63 ok 10 write_default.0.63 ok 11 write_valid.0.63 ok 12 write_invalid.0.63 ok 13 event_missing.0.63 ok 14 event_spurious.0.63 ok 15 get_value.0.62 # 0.62 PCMD3180 i2c2 Dev3 Ch7 Digi Volume ok 16 name.0.62 ok 17 write_default.0.62 ok 18 write_valid.0.62 ok 19 write_invalid.0.62 ok 20 event_missing.0.62 ok 21 event_spurious.0.62 ok 22 get_value.0.61 # 0.61 PCMD3180 i2c2 Dev3 Ch6 Digi Volume ok 23 name.0.61 ok 24 write_default.0.61 ok 25 write_valid.0.61 ok 26 write_invalid.0.61 ok 27 event_missing.0.61 ok 28 event_spurious.0.61 ok 29 get_value.0.60 # 0.60 PCMD3180 i2c2 Dev3 Ch5 Digi Volume ok 30 name.0.60 ok 31 write_default.0.60 ok 32 write_valid.0.60 ok 33 write_invalid.0.60 ok 34 event_missing.0.60 ok 35 event_spurious.0.60 ok 36 get_value.0.59 # 0.59 PCMD3180 i2c2 Dev3 Ch4 Digi Volume ok 37 name.0.59 ok 38 write_default.0.59 ok 39 write_valid.0.59 ok 40 write_invalid.0.59 ok 41 event_missing.0.59 ok 42 event_spurious.0.59 ok 43 get_value.0.58 # 0.58 PCMD3180 i2c2 Dev3 Ch3 Digi Volume ok 44 name.0.58 ok 45 write_default.0.58 ok 46 write_valid.0.58 ok 47 write_invalid.0.58 ok 48 event_missing.0.58 ok 49 event_spurious.0.58 ok 50 get_value.0.57 # 0.57 PCMD3180 i2c2 Dev3 Ch2 Digi Volume ok 51 name.0.57 ok 52 write_default.0.57 ok 53 write_valid.0.57 ok 54 write_invalid.0.57 ok 55 event_missing.0.57 ok 56 event_spurious.0.57 ok 57 get_value.0.56 # 0.56 PCMD3180 i2c2 Dev3 Ch1 Digi Volume ok 58 name.0.56 ok 59 write_default.0.56 ok 60 write_valid.0.56 ok 61 write_invalid.0.56 ok 62 event_missing.0.56 ok 63 event_spurious.0.56 ok 64 get_value.0.55 # 0.55 PCMD3180 i2c2 Dev3 Ch8 Fine Volume ok 65 name.0.55 ok 66 write_default.0.55 ok 67 write_valid.0.55 ok 68 write_invalid.0.55 ok 69 event_missing.0.55 ok 70 event_spurious.0.55 ok 71 get_value.0.54 # 0.54 PCMD3180 i2c2 Dev3 Ch7 Fine Volume ok 72 name.0.54 ok 73 write_default.0.54 ok 74 write_valid.0.54 ok 75 write_invalid.0.54 ok 76 event_missing.0.54 ok 77 event_spurious.0.54 ok 78 get_value.0.53 # 0.53 PCMD3180 i2c2 Dev3 Ch6 Fine Volume ok 79 name.0.53 ok 80 write_default.0.53 ok 81 write_valid.0.53 ok 82 write_invalid.0.53 ok 83 event_missing.0.53 ok 84 event_spurious.0.53 ok 85 get_value.0.52 # 0.52 PCMD3180 i2c2 Dev3 Ch5 Fine Volume ok 86 name.0.52 ok 87 write_default.0.52 ok 88 write_valid.0.52 ok 89 write_invalid.0.52 ok 90 event_missing.0.52 ok 91 event_spurious.0.52 ok 92 get_value.0.51 # 0.51 PCMD3180 i2c2 Dev3 Ch4 Fine Volume ok 93 name.0.51 ok 94 write_default.0.51 ok 95 write_valid.0.51 ok 96 write_invalid.0.51 ok 97 event_missing.0.51 ok 98 event_spurious.0.51 ok 99 get_value.0.50 # 0.50 PCMD3180 i2c2 Dev3 Ch3 Fine Volume ok 100 name.0.50 ok 101 write_default.0.50 ok 102 write_valid.0.50 ok 103 write_invalid.0.50 ok 104 event_missing.0.50 ok 105 event_spurious.0.50 ok 106 get_value.0.49 # 0.49 PCMD3180 i2c2 Dev3 Ch2 Fine Volume ok 107 name.0.49 ok 108 write_default.0.49 ok 109 write_valid.0.49 ok 110 write_invalid.0.49 ok 111 event_missing.0.49 ok 112 event_spurious.0.49 ok 113 get_value.0.48 # 0.48 PCMD3180 i2c2 Dev3 Ch1 Fine Volume ok 114 name.0.48 ok 115 write_default.0.48 ok 116 write_valid.0.48 ok 117 write_invalid.0.48 ok 118 event_missing.0.48 ok 119 event_spurious.0.48 ok 120 get_value.0.47 # 0.47 PCMD3180 i2c2 Dev2 Ch8 Digi Volume ok 121 name.0.47 ok 122 write_default.0.47 ok 123 write_valid.0.47 ok 124 write_invalid.0.47 ok 125 event_missing.0.47 ok 126 event_spurious.0.47 ok 127 get_value.0.46 # 0.46 PCMD3180 i2c2 Dev2 Ch7 Digi Volume ok 128 name.0.46 ok 129 write_default.0.46 ok 130 write_valid.0.46 ok 131 write_invalid.0.46 ok 132 event_missing.0.46 ok 133 event_spurious.0.46 ok 134 get_value.0.45 # 0.45 PCMD3180 i2c2 Dev2 Ch6 Digi Volume ok 135 name.0.45 ok 136 write_default.0.45 ok 137 write_valid.0.45 ok 138 write_invalid.0.45 ok 139 event_missing.0.45 ok 140 event_spurious.0.45 ok 141 get_value.0.44 # 0.44 PCMD3180 i2c2 Dev2 Ch5 Digi Volume ok 142 name.0.44 ok 143 write_default.0.44 ok 144 write_valid.0.44 ok 145 write_invalid.0.44 ok 146 event_missing.0.44 ok 147 event_spurious.0.44 ok 148 get_value.0.43 # 0.43 PCMD3180 i2c2 Dev2 Ch4 Digi Volume ok 149 name.0.43 ok 150 write_default.0.43 ok 151 write_valid.0.43 ok 152 write_invalid.0.43 ok 153 event_missing.0.43 ok 154 event_spurious.0.43 ok 155 get_value.0.42 # 0.42 PCMD3180 i2c2 Dev2 Ch3 Digi Volume ok 156 name.0.42 ok 157 write_default.0.42 ok 158 write_valid.0.42 ok 159 write_invalid.0.42 ok 160 event_missing.0.42 ok 161 event_spurious.0.42 ok 162 get_value.0.41 # 0.41 PCMD3180 i2c2 Dev2 Ch2 Digi Volume ok 163 name.0.41 ok 164 write_default.0.41 ok 165 write_valid.0.41 ok 166 write_invalid.0.41 ok 167 event_missing.0.41 ok 168 event_spurious.0.41 ok 169 get_value.0.40 # 0.40 PCMD3180 i2c2 Dev2 Ch1 Digi Volume ok 170 name.0.40 ok 171 write_default.0.40 ok 172 write_valid.0.40 ok 173 write_invalid.0.40 ok 174 event_missing.0.40 ok 175 event_spurious.0.40 ok 176 get_value.0.39 # 0.39 PCMD3180 i2c2 Dev2 Ch8 Fine Volume ok 177 name.0.39 ok 178 write_default.0.39 ok 179 write_valid.0.39 ok 180 write_invalid.0.39 ok 181 event_missing.0.39 ok 182 event_spurious.0.39 ok 183 get_value.0.38 # 0.38 PCMD3180 i2c2 Dev2 Ch7 Fine Volume ok 184 name.0.38 ok 185 write_default.0.38 ok 186 write_valid.0.38 ok 187 write_invalid.0.38 ok 188 event_missing.0.38 ok 189 event_spurious.0.38 ok 190 get_value.0.37 # 0.37 PCMD3180 i2c2 Dev2 Ch6 Fine Volume ok 191 name.0.37 ok 192 write_default.0.37 ok 193 write_valid.0.37 ok 194 write_invalid.0.37 ok 195 event_missing.0.37 ok 196 event_spurious.0.37 ok 197 get_value.0.36 # 0.36 PCMD3180 i2c2 Dev2 Ch5 Fine Volume ok 198 name.0.36 ok 199 write_default.0.36 ok 200 write_valid.0.36 ok 201 write_invalid.0.36 ok 202 event_missing.0.36 ok 203 event_spurious.0.36 ok 204 get_value.0.35 # 0.35 PCMD3180 i2c2 Dev2 Ch4 Fine Volume ok 205 name.0.35 ok 206 write_default.0.35 ok 207 write_valid.0.35 ok 208 write_invalid.0.35 ok 209 event_missing.0.35 ok 210 event_spurious.0.35 ok 211 get_value.0.34 # 0.34 PCMD3180 i2c2 Dev2 Ch3 Fine Volume ok 212 name.0.34 ok 213 write_default.0.34 ok 214 write_valid.0.34 ok 215 write_invalid.0.34 ok 216 event_missing.0.34 ok 217 event_spurious.0.34 ok 218 get_value.0.33 # 0.33 PCMD3180 i2c2 Dev2 Ch2 Fine Volume ok 219 name.0.33 ok 220 write_default.0.33 ok 221 write_valid.0.33 ok 222 write_invalid.0.33 ok 223 event_missing.0.33 ok 224 event_spurious.0.33 ok 225 get_value.0.32 # 0.32 PCMD3180 i2c2 Dev2 Ch1 Fine Volume ok 226 name.0.32 ok 227 write_default.0.32 ok 228 write_valid.0.32 ok 229 write_invalid.0.32 ok 230 event_missing.0.32 ok 231 event_spurious.0.32 ok 232 get_value.0.31 # 0.31 PCMD3180 i2c2 Dev1 Ch8 Digi Volume ok 233 name.0.31 ok 234 write_default.0.31 ok 235 write_valid.0.31 ok 236 write_invalid.0.31 ok 237 event_missing.0.31 ok 238 event_spurious.0.31 ok 239 get_value.0.30 # 0.30 PCMD3180 i2c2 Dev1 Ch7 Digi Volume ok 240 name.0.30 ok 241 write_default.0.30 ok 242 write_valid.0.30 ok 243 write_invalid.0.30 ok 244 event_missing.0.30 ok 245 event_spurious.0.30 ok 246 get_value.0.29 # 0.29 PCMD3180 i2c2 Dev1 Ch6 Digi Volume ok 247 name.0.29 ok 248 write_default.0.29 ok 249 write_valid.0.29 ok 250 write_invalid.0.29 ok 251 event_missing.0.29 ok 252 event_spurious.0.29 ok 253 get_value.0.28 # 0.28 PCMD3180 i2c2 Dev1 Ch5 Digi Volume ok 254 name.0.28 ok 255 write_default.0.28 ok 256 write_valid.0.28 ok 257 write_invalid.0.28 ok 258 event_missing.0.28 ok 259 event_spurious.0.28 ok 260 get_value.0.27 # 0.27 PCMD3180 i2c2 Dev1 Ch4 Digi Volume ok 261 name.0.27 ok 262 write_default.0.27 ok 263 write_valid.0.27 ok 264 write_invalid.0.27 ok 265 event_missing.0.27 ok 266 event_spurious.0.27 ok 267 get_value.0.26 # 0.26 PCMD3180 i2c2 Dev1 Ch3 Digi Volume ok 268 name.0.26 ok 269 write_default.0.26 ok 270 write_valid.0.26 ok 271 write_invalid.0.26 ok 272 event_missing.0.26 ok 273 event_spurious.0.26 ok 274 get_value.0.25 # 0.25 PCMD3180 i2c2 Dev1 Ch2 Digi Volume ok 275 name.0.25 ok 276 write_default.0.25 ok 277 write_valid.0.25 ok 278 write_invalid.0.25 ok 279 event_missing.0.25 ok 280 event_spurious.0.25 ok 281 get_value.0.24 # 0.24 PCMD3180 i2c2 Dev1 Ch1 Digi Volume ok 282 name.0.24 ok 283 write_default.0.24 ok 284 write_valid.0.24 ok 285 write_invalid.0.24 ok 286 event_missing.0.24 ok 287 event_spurious.0.24 ok 288 get_value.0.23 # 0.23 PCMD3180 i2c2 Dev1 Ch8 Fine Volume ok 289 name.0.23 ok 290 write_default.0.23 ok 291 write_valid.0.23 ok 292 write_invalid.0.23 ok 293 event_missing.0.23 ok 294 event_spurious.0.23 ok 295 get_value.0.22 # 0.22 PCMD3180 i2c2 Dev1 Ch7 Fine Volume ok 296 name.0.22 ok 297 write_default.0.22 ok 298 write_valid.0.22 ok 299 write_invalid.0.22 ok 300 event_missing.0.22 ok 301 event_spurious.0.22 ok 302 get_value.0.21 # 0.21 PCMD3180 i2c2 Dev1 Ch6 Fine Volume ok 303 name.0.21 ok 304 write_default.0.21 ok 305 write_valid.0.21 ok 306 write_invalid.0.21 ok 307 event_missing.0.21 ok 308 event_spurious.0.21 ok 309 get_value.0.20 # 0.20 PCMD3180 i2c2 Dev1 Ch5 Fine Volume ok 310 name.0.20 ok 311 write_default.0.20 ok 312 write_valid.0.20 ok 313 write_invalid.0.20 ok 314 event_missing.0.20 ok 315 event_spurious.0.20 ok 316 get_value.0.19 # 0.19 PCMD3180 i2c2 Dev1 Ch4 Fine Volume ok 317 name.0.19 ok 318 write_default.0.19 ok 319 write_valid.0.19 ok 320 write_invalid.0.19 ok 321 event_missing.0.19 ok 322 event_spurious.0.19 ok 323 get_value.0.18 # 0.18 PCMD3180 i2c2 Dev1 Ch3 Fine Volume ok 324 name.0.18 ok 325 write_default.0.18 ok 326 write_valid.0.18 ok 327 write_invalid.0.18 ok 328 event_missing.0.18 ok 329 event_spurious.0.18 ok 330 get_value.0.17 # 0.17 PCMD3180 i2c2 Dev1 Ch2 Fine Volume ok 331 name.0.17 ok 332 write_default.0.17 ok 333 write_valid.0.17 ok 334 write_invalid.0.17 ok 335 event_missing.0.17 ok 336 event_spurious.0.17 ok 337 get_value.0.16 # 0.16 PCMD3180 i2c2 Dev1 Ch1 Fine Volume ok 338 name.0.16 ok 339 write_default.0.16 ok 340 write_valid.0.16 ok 341 write_invalid.0.16 ok 342 event_missing.0.16 ok 343 event_spurious.0.16 ok 344 get_value.0.15 # 0.15 PCMD3180 i2c2 Dev0 Ch8 Digi Volume ok 345 name.0.15 ok 346 write_default.0.15 ok 347 write_valid.0.15 ok 348 write_invalid.0.15 ok 349 event_missing.0.15 ok 350 event_spurious.0.15 ok 351 get_value.0.14 # 0.14 PCMD3180 i2c2 Dev0 Ch7 Digi Volume ok 352 name.0.14 ok 353 write_default.0.14 ok 354 write_valid.0.14 ok 355 write_invalid.0.14 ok 356 event_missing.0.14 ok 357 event_spurious.0.14 ok 358 get_value.0.13 # 0.13 PCMD3180 i2c2 Dev0 Ch6 Digi Volume ok 359 name.0.13 ok 360 write_default.0.13 ok 361 write_valid.0.13 ok 362 write_invalid.0.13 ok 363 event_missing.0.13 ok 364 event_spurious.0.13 ok 365 get_value.0.12 # 0.12 PCMD3180 i2c2 Dev0 Ch5 Digi Volume ok 366 name.0.12 ok 367 write_default.0.12 ok 368 write_valid.0.12 ok 369 write_invalid.0.12 ok 370 event_missing.0.12 ok 371 event_spurious.0.12 ok 372 get_value.0.11 # 0.11 PCMD3180 i2c2 Dev0 Ch4 Digi Volume ok 373 name.0.11 ok 374 write_default.0.11 ok 375 write_valid.0.11 ok 376 write_invalid.0.11 ok 377 event_missing.0.11 ok 378 event_spurious.0.11 ok 379 get_value.0.10 # 0.10 PCMD3180 i2c2 Dev0 Ch3 Digi Volume ok 380 name.0.10 ok 381 write_default.0.10 ok 382 write_valid.0.10 ok 383 write_invalid.0.10 ok 384 event_missing.0.10 ok 385 event_spurious.0.10 ok 386 get_value.0.9 # 0.9 PCMD3180 i2c2 Dev0 Ch2 Digi Volume ok 387 name.0.9 ok 388 write_default.0.9 ok 389 write_valid.0.9 ok 390 write_invalid.0.9 ok 391 event_missing.0.9 ok 392 event_spurious.0.9 ok 393 get_value.0.8 # 0.8 PCMD3180 i2c2 Dev0 Ch1 Digi Volume ok 394 name.0.8 ok 395 write_default.0.8 ok 396 write_valid.0.8 ok 397 write_invalid.0.8 ok 398 event_missing.0.8 ok 399 event_spurious.0.8 ok 400 get_value.0.7 # 0.7 PCMD3180 i2c2 Dev0 Ch8 Fine Volume ok 401 name.0.7 ok 402 write_default.0.7 ok 403 write_valid.0.7 ok 404 write_invalid.0.7 ok 405 event_missing.0.7 ok 406 event_spurious.0.7 ok 407 get_value.0.6 # 0.6 PCMD3180 i2c2 Dev0 Ch7 Fine Volume ok 408 name.0.6 ok 409 write_default.0.6 ok 410 write_valid.0.6 ok 411 write_invalid.0.6 ok 412 event_missing.0.6 ok 413 event_spurious.0.6 ok 414 get_value.0.5 # 0.5 PCMD3180 i2c2 Dev0 Ch6 Fine Volume ok 415 name.0.5 ok 416 write_default.0.5 ok 417 write_valid.0.5 ok 418 write_invalid.0.5 ok 419 event_missing.0.5 ok 420 event_spurious.0.5 ok 421 get_value.0.4 # 0.4 PCMD3180 i2c2 Dev0 Ch5 Fine Volume ok 422 name.0.4 ok 423 write_default.0.4 ok 424 write_valid.0.4 ok 425 write_invalid.0.4 ok 426 event_missing.0.4 ok 427 event_spurious.0.4 ok 428 get_value.0.3 # 0.3 PCMD3180 i2c2 Dev0 Ch4 Fine Volume ok 429 name.0.3 ok 430 write_default.0.3 ok 431 write_valid.0.3 ok 432 write_invalid.0.3 ok 433 event_missing.0.3 ok 434 event_spurious.0.3 ok 435 get_value.0.2 # 0.2 PCMD3180 i2c2 Dev0 Ch3 Fine Volume ok 436 name.0.2 ok 437 write_default.0.2 ok 438 write_valid.0.2 ok 439 write_invalid.0.2 ok 440 event_missing.0.2 ok 441 event_spurious.0.2 ok 442 get_value.0.1 # 0.1 PCMD3180 i2c2 Dev0 Ch2 Fine Volume ok 443 name.0.1 ok 444 write_default.0.1 ok 445 write_valid.0.1 ok 446 write_invalid.0.1 ok 447 event_missing.0.1 ok 448 event_spurious.0.1 ok 449 get_value.0.0 # 0.0 PCMD3180 i2c2 Dev0 Ch1 Fine Volume ok 450 name.0.0 ok 451 write_default.0.0 ok 452 write_valid.0.0 ok 453 write_invalid.0.0 ok 454 event_missing.0.0 ok 455 event_spurious.0.0 # Totals: pass:455 fail:0 xfail:0 xpass:0 skip:0 error:0
2024-04-22ASoC: dapm: improve debugfs output and introduceMark Brown3-2/+361
Merge series from Luca Ceresoli <[email protected]>: This patch series improves the tools available to understand and debug DAPM.
2024-04-22ASoC: nau8821: Add delay control for ADCMark Brown3-10/+17
Merge series from Seven Lee <[email protected]>: Change the original fixed delay to the assignment from the property. It will make it more flexible to different platforms to avoid pop noise at the beginning of recording.
2024-04-22ASoC: Intel: avs: Switch to acpi-nhltMark Brown10-209/+615
Merge series from Cezary Rojewski <[email protected]>: The change is based on rafael/acpi-nhlt [1] immutable branch which Rafael kindly prepared for me. Without the topmost changes to ACPI/NHLT, the patches present will fail to compile. Recent changes for the ACPI tree [2] refactored interfaces of the NHLT table. Currently we have two implementations - one found in acpi subsystem (unused) and one in sound/hda/. As NHLT is part of ACPI, idea is to make the former useful and then switch all users of existing sound/hda/intel-nhlt.c to this new interface over time and remove the duplicate afterward. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/?h=acpi-nhlt [2]: https://lore.kernel.org/linux-acpi/[email protected]/
2024-04-21Linux 6.9-rc5Linus Torvalds1-1/+1
2024-04-21Merge tag 'char-misc-6.9-rc5' of ↵Linus Torvalds11-80/+104
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.9-rc5. Included in here are the following: - binder driver fix for reported problem - speakup crash fix - mei driver fixes for reported problems - comdei driver fix - interconnect driver fixes - rtsx driver fix - peci.h kernel doc fix All of these have been in linux-next for over a week with no reported problems" * tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: peci: linux/peci.h: fix Excess kernel-doc description warning binder: check offset alignment in binder_get_object() comedi: vmk80xx: fix incomplete endpoint checking mei: vsc: Unregister interrupt handler for system suspend Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" misc: rtsx: Fix rts5264 driver status incorrect when card removed mei: me: disable RPL-S on SPS and IGN firmwares speakup: Avoid crash on very long word interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
2024-04-21Merge tag 'driver-core-6.9-rc5' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull kernfs bugfix and documentation update from Greg KH: "Here are two changes for 6.9-rc5 that deal with "driver core" stuff, that do the following: - sysfs reference leak fix - embargoed-hardware-issues.rst update for Power Both of these have been in linux-next for over a week with no reported issues" * tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for Power fs: sysfs: Fix reference leak in sysfs_break_active_protection()
2024-04-21Merge tag 'tty-6.9-rc5' of ↵Linus Torvalds12-34/+81
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.9-rc5 that resolve a bunch of reported problems. Included in here are: - MAINTAINERS and .mailmap update for Richard Genoud - serial core regression fixes from 6.9-rc1 changes - pci id cleanups - serial core crash fix - stm32 driver fixes - 8250 driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: Reset .throttled state in .startup() serial: stm32: Return IRQ_NONE in the ISR if no handling happend serial: core: Fix missing shutdown and startup for serial base port serial: core: Clearing the circular buffer before NULLifying it MAINTAINERS: mailmap: update Richard Genoud's email address serial/pmac_zilog: Remove flawed mitigation for rx irq flood serial: 8250_pci: Remove redundant PCI IDs serial: core: Fix regression when runtime PM is not enabled serial: mxs-auart: add spinlock around changing cts state serial: 8250_dw: Revert: Do not reclock if already at correct rate serial: 8250_lpc18xx: disable clks on error in probe()
2024-04-21Merge tag 'usb-6.9-rc5' of ↵Linus Torvalds19-64/+147
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5. Included in here are: - MAINTAINER file update for invalid email address - usb-serial device id updates - typec driver fixes - thunderbolt / usb4 driver fixes - usb core shutdown fixes - cdc-wdm driver revert for reported problem in -rc1 - usb gadget driver fixes - xhci driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Telit FN920C04 rmnet compositions usb: dwc3: ep0: Don't reset resource alloc flag Revert "usb: cdc-wdm: close race between read and workqueue" USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants usb: misc: onboard_usb_hub: Disable the USB hub clock on failure thunderbolt: Avoid notify PM core about runtime PM resume thunderbolt: Fix wake configurations after device unplug usb: dwc2: host: Fix dereference issue in DDMA completion flow. usb: typec: mux: it5205: Fix ChipID value typo MAINTAINERS: Drop Li Yang as their email address stopped working usb: gadget: fsl: Initialize udc before using it usb: Disable USB3 LPM at shutdown usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error usb: typec: tcpm: Correct the PDO counting in pd_set usb: gadget: functionfs: Wait for fences before enqueueing DMABUF usb: gadget: functionfs: Fix inverted DMA fence direction ...
2024-04-21Merge tag 'sched_urgent_for_v6.9_rc5' of ↵Linus Torvalds3-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Add a missing memory barrier in the concurrency ID mm switching * tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Add missing memory barrier in switch_mm_cid
2024-04-21Merge tag 'x86_urgent_for_v6.9_rc5' of ↵Linus Torvalds5-12/+87
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ - Print the correct error code when FRED reports a bad event type - Add a FRED-specific INT80 handler without the special dances that need to happen in the current one - Enable the using-the-default-return-thunk-but-you-should-not warning only on configs which actually enable those special return thunks - Check the proper feature flags when selecting BHI retpoline mitigation * tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ x86/fred: Fix incorrect error code printout in fred_bad_type() x86/fred: Fix INT80 emulation for FRED x86/retpolines: Enable the default thunk warning only on relevant configs x86/bugs: Fix BHI retpoline check
2024-04-21ASoC: Intel: avs: Switch to ACPI NHLTAmadeusz Sławiński5-27/+24
Now that NHLT support in ACPI framework was introduced, migrate avs driver to new API. Signed-off-by: Amadeusz Sławiński <[email protected]> Signed-off-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-04-21ASoc: dt-bindings: PCM6240: Add initial DT bindingShenghao Ding1-0/+177
PCM6240 family chips are popular among audio customers, in spite of only a portion of the functionality of codec, such as ADC or DAC, and so on, for different Specifications, range from Personal Electric to Automotive Electric, even some professional fields. Yet their audio performance is far superior to the codec's, and cost is lower than codec, and much easier to program than codec. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Shenghao Ding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.